The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Advances on Thermally Conductive Epoxy‐Based Composites as Electronic Packaging Underfill Materials—A Review
Abstract
The integrated circuits industry has been continuously producing microelectronic components with ever higher integration level, packaging density, and power density, which demand more stringent requirements for heat dissipation. Electronic packaging materials are used to pack these microelectronic components together, help to dissipate heat, redistribute stresses, and protect the whole system from the environment. They serve an important role in ensuring the performance and reliability of the electronic devices. Among various packaging materials, epoxy‐based underfills are often employed in flip‐chip packaging. However, widely used capillary underfill materials suffer from their low thermal conductivity, unable to meet the growing heat dissipation required of next‐generation IC chips with much higher power density. Many strategies have been proposed to improve the thermal conductivity of epoxy, but its application as underfill materials with complex performance requirements is still difficult. In fact, optimizing the combined thermal–electrical–mechanical–processing properties of underfill materials for flip‐chip packaging remains a great challenge. Herein, state‐of‐the‐art advances that have been made to satisfy the key requirements of capillary underfill materials are reviewed. Based on these studies, the perspectives for designing high‐performance underfill materials with novel microstructures in electronic packaging for high‐power density electronic devices are provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
A simplified method for calculating the debye temperature from elastic constants
Anderson, O. L. (1963) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(63)90067-2 · Cited by 3,684
A Mechanism for Non-Newtonian Flow in Suspensions of Rigid Spheres
Krieger, I. M., & Dougherty, T. J. (1959) · Transactions of the Society of Rheology · doi:10.1122/1.548848 · Cited by 3,402
Emerging challenges and materials for thermal management of electronics
Moore, A. L., & Shi, L. (2014) · Materials Today · doi:10.1016/j.mattod.2014.04.003 · Cited by 2,106
Thermal conductivity of polymer-based composites: Fundamentals and applications
Chen, H., Ginzburg, V. V., Yang, J., Yang, Y., Liu, W., Huang, Y., Du, L., & Chen, B. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.03.001 · Cited by 2,049
Dispersion and alignment of carbon nanotubes in polymer matrix: A review
XIE, X., MAI, Y., & ZHOU, X. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.04.002 · Cited by 1,960
Self-citationLow dielectric constant materials for microelectronics
Maex, K., Baklanov, M. R., Shamiryan, D., lacopi, F., Brongersma, S. H., & Yanovitskaya, Z. S. (2003) · Journal of Applied Physics · doi:10.1063/1.1567460 · Cited by 1,634
Effect of Polymer-Filler and Filler-Filler Interactions on Dynamic Properties of Filled Vulcanizates
Wang, M.-J. (1998) · Rubber Chemistry and Technology · doi:10.5254/1.3538492 · Cited by 1,033
Interfacial Heat Flow in Carbon Nanotube Suspensions
Huxtable, S. T., Cahill, D. G., Shenogin, S., Xue, L., Ozisik, R., Barone, P., Usrey, M., Strano, M. S., Siddons, G., Shim, M., et al. (2003) · Nature Materials · doi:10.1038/nmat996 · Cited by 1,023
Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites
Song, Y. S., & Youn, J. R. (2005) · Carbon · doi:10.1016/j.carbon.2005.01.007 · Cited by 1,010
Advanced Flame‐Retardant Methods for Polymeric Materials
Liu, B., Zhao, H., & Wang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202107905 · Cited by 887
Thermal Conductivity of Polymers and Their Nanocomposites
Xu, X., Chen, J., Zhou, J., & Li, B. (2018) · Advanced Materials · doi:10.1002/adma.201705544 · Cited by 808
The Influence of Brownian Movement on the Viscosity of Solutions.
Simha, R. (1940) · The Journal of Physical Chemistry · doi:10.1021/j150397a004 · Cited by 711
Effects of chemical bonding on heat transport across interfaces
Losego, M. D., Grady, M. E., Sottos, N. R., Cahill, D. G., & Braun, P. V. (2012) · Nature Materials · doi:10.1038/nmat3303 · Cited by 701
Two-Dimensional Materials for Thermal Management Applications
Song, H., Liu, J., Liu, B., Wu, J., Cheng, H.-M., & Kang, F. (2018) · Joule · doi:10.1016/j.joule.2018.01.006 · Cited by 680
Song, S. H., Park, K. H., Kim, B. H., Choi, Y. W., Jun, G. H., Lee, D. J., Kong, B., Paik, K., & Jeon, S. (2013) · Advanced Materials · doi:10.1002/adma.201202736 · Cited by 667
Huang, X., Zhi, C., Jiang, P., Golberg, D., Bando, Y., & Tanaka, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201824 · Cited by 647
Thermal conductance of interfaces between highly dissimilar materials
Lyeo, H.-K., & Cahill, D. G. (2006) · Physical Review B · doi:10.1103/physrevb.73.144301 · Cited by 576
Thermal and electrical conductivity of single- and multi-walled carbon nanotube-epoxy composites
Moisala, A., Li, Q., Kinloch, I. A., & Windle, A. H. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.016 · Cited by 569
Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites
Kim, J. A., Seong, D. G., Kang, T. J., & Youn, J. R. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.026 · Cited by 519
Rheology and applications of highly filled polymers: A review of current understanding
Rueda, M. M., Auscher, M.-C., Fulchiron, R., Périé, T., Martin, G., Sonntag, P., & Cassagnau, P. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.007 · Cited by 518
Yu, B., Xing, W., Guo, W., Qiu, S., Wang, X., Lo, S., & Hu, Y. Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01565d · Cited by 428
Thermal conductivity of graphene-based polymer nanocomposites
Huang, X., Zhi, C., Lin, Y., Bao, H., Wu, G., Jiang, P., & Mai, Y.-W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100577 · Cited by 410
Self-citationGu, J., Liang, C., Zhao, X., Gan, B., Qiu, H., Guo, Y., Yang, X., Zhang, Q., & Wang, D.-Y. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.12.015 · Cited by 397
Shear rheology of hard-sphere, dispersed, and aggregated suspensions, and filler-matrix composites
Genovese, D. B. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.12.005 · Cited by 383
In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites
Zhu, J., Wei, S., Ryu, J., Budhathoki, M., Liang, G., & Guo, Z. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00063a · Cited by 339
50th Anniversary Perspective: Dielectric Phenomena in Polymers and Multilayered Dielectric Films
Baer, E., & Zhu, L. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02669 · Cited by 325
Advanced Materials for Thermal Management of Electronic Packaging
Tong, X. C. (2011) · Springer Series in Advanced Microelectronics · doi:10.1007/978-1-4419-7759-5 · Cited by 302
Cui, W., Du, F., Zhao, J., Zhang, W., Yang, Y., Xie, X., & Mai, Y.-W. (2011) · Carbon · doi:10.1016/j.carbon.2010.09.047 · Cited by 294
Self-citationMicrostructure-Hardened Silver Nanowires
Wu, B., Heidelberg, A., Boland, J. J., Sader, J. E., Sun, & Li (2006) · Nano Letters · doi:10.1021/nl052427f · Cited by 290
Chemical and physical control of the rheology of concentrated metal oxide suspensions
Zhou, Z., Scales, P. J., & Boger, D. V. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00473-5 · Cited by 278
Wang, S., Cheng, Y., Wang, R., Sun, J., & Gao, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500009p · Cited by 276
Thermal Properties of the Binary‐Filler Hybrid Composites with Graphene and Copper Nanoparticles
Barani, Z., Mohammadzadeh, A., Geremew, A., Huang, C., Coleman, D., Mangolini, L., Kargar, F., & Balandin, A. A. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904008 · Cited by 275
Flame-retardant strategy and mechanism of fiber reinforced polymeric composite: A review
Shi, X.-H., Li, X., Li, Y.-M., Li, Z., & Wang, D. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109663 · Cited by 264
Enhanced Electrical and Thermal Conduction in Graphene-Encapsulated Copper Nanowires
Mehta, R., Chugh, S., & Chen, Z. (2015) · Nano Letters · doi:10.1021/nl504889t · Cited by 252
Hsiao, M.-C., Ma, C.-C. M., Chiang, J.-C., Ho, K.-K., Chou, T.-Y., Xie, X., Tsai, C.-H., Chang, L.-H., & Hsieh, C.-K. (2013) · Nanoscale · doi:10.1039/c3nr01471a · Cited by 234
Self-citationEffect of functionalization on thermal conductivities of graphene/epoxy composites
Shen, X., Wang, Z., Wu, Y., Liu, X., & Kim, J.-K. (2016) · Carbon · doi:10.1016/j.carbon.2016.07.042 · Cited by 234
Synthesis and application of epoxy-ended hyperbranched polymers
Chen, S., Xu, Z., & Zhang, D. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.03.014 · Cited by 233
Study of high thermal conductive epoxy resins containing controlled high‐order structures
Akatsuka, M., & Takezawa, Y. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12489 · Cited by 210
Enhancing and tuning phonon transport at vibrationally mismatched solid-solid interfaces
English, T. S., Duda, J. C., Smoyer, J. L., Jordan, D. A., Norris, P. M., & Zhigilei, L. V. (2012) · Physical Review B · doi:10.1103/physrevb.85.035438 · Cited by 203
Synthesis and Properties of a Bio‐Based Epoxy Resin with High Epoxy Value and Low Viscosity
Ma, S., Liu, X., Fan, L., Jiang, Y., Cao, L., Tang, Z., & Zhu, J. (2014) · ChemSusChem · doi:10.1002/cssc.201300749 · Cited by 196
Wajid, A. S., Ahmed, H. S. T., Das, S., Irin, F., Jankowski, A. F., & Green, M. J. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200043 · Cited by 194
Comparative study of thermally conductive fillers in underfill for the electronic components
Sun Lee, W., & Yu, J. (2005) · Diamond and Related Materials · doi:10.1016/j.diamond.2005.05.008 · Cited by 181
Chen, C., Tang, Y., Ye, Y. S., Xue, Z., Xue, Y., Xie, X., & Mai, Y.-W. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.002 · Cited by 179
Self-citationWu, Z., Gao, S., Chen, L., Jiang, D., Shao, Q., Zhang, B., Zhai, Z., Wang, C., Zhao, M., Ma, Y., et al. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700357 · Cited by 178
Huang, X., Zhi, C., & Jiang, P. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp308556r · Cited by 176
Park, J. G., Cheng, Q., Lu, J., Bao, J., Li, S., Tian, Y., Liang, Z., Zhang, C., & Wang, B. (2012) · Carbon · doi:10.1016/j.carbon.2011.12.046 · Cited by 175
Chen, C., Xue, Y., Li, X., Wen, Y., Liu, J., Xue, Z., Shi, D., Zhou, X., Xie, X., & Mai, Y.-W. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.12.019 · Cited by 172
Self-citationLi, X., Feng, Y., Chen, C., Ye, Y., Zeng, H., Qu, H., Liu, J., Zhou, X., Long, S., & Xie, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08008a · Cited by 169
Self-citationOwais, M., Zhao, J., Imani, A., Wang, G., Zhang, H., & Zhang, Z. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.11.006 · Cited by 159
Graphene foam-embedded epoxy composites with significant thermal conductivity enhancement
Liu, Z., Chen, Y., Li, Y., Dai, W., Yan, Q., Alam, F. E., Du, S., Wang, Z., Nishimura, K., Jiang, N., et al. (2019) · Nanoscale · doi:10.1039/c9nr03968f · Cited by 159
Mao, D., Chen, J., Ren, L., Zhang, K., Yuen, M. M. F., Zeng, X., Sun, R., Xu, J., & Wong, C. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.05.024 · Cited by 145
Survey of High-Temperature Polymeric Encapsulants for Power Electronics Packaging
Yao, Y., Lu, G., Boroyevich, D., et al. (2015) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2014.2337300 · Cited by 139
Yu, H., Li, L., Kido, T., Xi, G., Xu, G., & Guo, F. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35016 · Cited by 137
Tang, X., Zhou, Y., & Peng, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09830 · Cited by 123
An, D., Cheng, S., Xi, S., Zhang, Z., Duan, X., Ren, Y., Li, J., Sun, Z., Liu, Y., & Wong, C. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123151 · Cited by 123
Liu, W., Wang, Z., Xiong, L., & Zhao, L. (2010) · Polymer · doi:10.1016/j.polymer.2010.08.039 · Cited by 116
Zhao, J., Du, F., Zhou, X., Cui, W., Wang, X., Zhu, H. Y., Xie, X., & Mai, Y. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.05.005 · Cited by 116
Self-citationChen, C., Wang, H., Xue, Y., Xue, Z., Liu, H.-Y., Xie, X., & Mai, Y. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.04.005 · Cited by 116
Self-citationHan, G., Zhang, D., Kong, C., Zhou, B., Shi, Y., Feng, Y., Liu, C., & Wang, D. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135482 · Cited by 113
Du, F., Yang, W., Zhang, F., Tang, C. Y., Liu, S., Le, Y., & Law, W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03196 · Cited by 104
Sintering of Copper Particles for Die Attach
Kahler, J., Heuck, N., Wagner, A., Stranz, A., Peiner, E., & Waag, A. (2012) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2012.2201940 · Cited by 90
Wong, C. P., Luo, S., & Zhang, Z. (2000) · Science · doi:10.1126/science.290.5500.2269 · Cited by 85
Mosanenzadeh, S. G., Khalid, S. M., Cui, Y., & Naguib, H. E. (2015) · Polymer Composites · doi:10.1002/pc.23398 · Cited by 66
Huang, L., Zhu, P., Li, G., Zhou, F., Lu, D. D., Sun, R., & Wong, C. (2015) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-015-2870-1 · Cited by 61
Thermally conductive, insulated polyimide nanocomposites by AlO(OH)-coated MWCNTs
Zhang, Y., Xiao, S., Wang, Q., Liu, S., Qiao, Z., Chi, Z., Xu, J., & Economy, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12450a · Cited by 61
Self-citationPreparation of polyimide/Al2O3 composite films as improved solid dielectrics
Alias, A., Ahmad, Z., & Ismail, A. B. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.04.001 · Cited by 60
Zhang, Y., Shen, Y., Shi, K., et al. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.04.009 · Cited by 57
Self-citationJung, D.-W., Kim, J. M., Yoon, H.-W., Nam, K. M., Kwon, Y., Jeong, S., Baek, Y. H., Choi, Y. S., Chang, S., Yi, G., et al. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.128 · Cited by 57
Kim, Y., Yeo, H., You, N., Jang, S. G., Ahn, S., Jeong, K., Lee, S. H., & Goh, M. (2017) · Polymer Chemistry · doi:10.1039/c7py00243b · Cited by 55
Isarn, I., Massagués, L., Ramis, X., Serra, À., & Ferrando, F. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.09.007 · Cited by 46
Guo, Q., Zhu, P., Li, G., Huang, L., Zhang, Y., Lu, D. D., Sun, R., & Wong, C. (2015) · RSC Advances · doi:10.1039/c5ra06914a · Cited by 41
Self-citationXiong, S., Zhang, P., Zou, Q., Xia, Y., Jiang, M., & Gai, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108596 · Cited by 41
Noma, Y., Saga, Y., & Une, N. (2014) · Carbon · doi:10.1016/j.carbon.2014.06.073 · Cited by 39
Zhang, S., Chen, W., Zhao, Y., Yang, K., Du, B., Ding, L., Yang, W. M., & Wu, S. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109106 · Cited by 39
Ni, Y., Han, H., Volz, S. G., & Dumitrică, T. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b02551 · Cited by 36
High-performance polyimide nanocomposites with core-shell AgNWs@BN for electronic packagings
Zhou, Y., & Liu, F. (2016) · Applied Physics Letters · doi:10.1063/1.4961625 · Cited by 34
A carbon black derivative with liquid behavior
Li, Q., Dong, L., Liu, Y., Xie, H., & Xiong, C. (2010) · Carbon · doi:10.1016/j.carbon.2010.11.027 · Cited by 32
Morishita, T., & Matsushita, M. (2021) · Carbon · doi:10.1016/j.carbon.2021.08.058 · Cited by 31
Isarn, I., Gamardella, F., Fernández‐Francos, X., et al. (2019) · Polymers · doi:10.3390/polym11010138 · Cited by 29
Bozoglu, D., Deligöz, H., Ulutaş, K., Yakut, Ş., & Değer, D. (2019) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2019.02.013 · Cited by 26
Im, H., Hwang, Y., Moon, J. H., Lee, S. H., & Kim, J. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.07.020 · Cited by 24
Ye, H., Wen, H., Chen, J., Zhu, P., Yuen, M. M. F., Fu, X., Sun, R., & Wong, C. (2019) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.9b00312 · Cited by 23
In-situ shear exfoliation and thermal conductivity of SBS/Graphite nanoplatelet nanocomposites
Wen, Y., Xue, Y., Li, X., Pei, H., Zhou, X., Feng, Y., Ye, Y., Xie, X., & Mai, Y. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108172 · Cited by 23
Self-citationElectrically Conductive Adhesives (ECAs)
Lu, D., & Wong, C. P. (2016) · Springer eBooks · doi:10.1007/978-3-319-45098-8_10 · Cited by 16
Cited by
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Metadata
- Authors
- Wen, Y., Chen, C., Ye, Y., Xue, Z., Liu, H., Zhou, X., Zhang, Y., Li, D., Xie, X., & Mai, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-09-26
- Volume
- 34
- Issue
- 52
- Pages
- e2201023-e2201023
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4280624869
- Cited by
- 367
- References
- 85
- FWCI
- 20.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.