The DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells
Abstract
This review presents various hole transport layers (HTLs) employed in perovskite solar cells (PSCs) in pursuing high power conversion efficiency (PCE) and functional stability. The PSCs have achieved high PCE (over 23%, certified by NREL) and more efforts have been devoted into research for stability enhancement. Inorganic HTLs become a popular choice as selective contact materials because of their intrinsic chemical stability and low cost. HTLs and electron transport layers (ETLs) are critical components of PSCs due to the requirement to create charge collection selectivity. Herein the authors provide an overview on inorganic HTLs synthesis, properties, and their application in various PSCs for both mesoporous and planar architectures. Inorganic HTLs with appropriate properties, such as proper energy level and high carrier mobility, can not only assist with charge transport, but also improve the stability of PSCs under ambient conditions. The importance of interfacial chemistry and interfacial charge transport is further addressed to understand the underlying mechanism of related degradation and carrier dynamic. It is expected that the success of the inorganic HTL in PSCs can stimulate further research and bring real impact for future photovoltaic technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Self-citationJeon, N. J., Na, H., Jung, E. H., Yang, T.-Y., Lee, Y. G., Kim, G., Shin, H.-W., Il Seok, S., Lee, J., & Seo, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0200-6 · Cited by 2,089
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
Irwin, M. D., Buchholz, D. B., Hains, A. W., Chang, R. P. H., & Marks, T. J. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0711990105 · Cited by 1,350
Christians, J. A., Fung, R. C. M., & Kamat, P. V. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411014k · Cited by 1,313
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Habisreutinger, S. N., Leijtens, T., Eperon, G. E., Stranks, S. D., Nicholas, R. J., & Snaith, H. J. (2014) · Nano Letters · doi:10.1021/nl501982b · Cited by 1,210
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Li, X., Ibrahim Dar, M., Yi, C., Luo, J., Tschumi, M., Zakeeruddin, S. M., Nazeeruddin, M. K., Han, H., & Grätzel, M. (2015) · Nature Chemistry · doi:10.1038/nchem.2324 · Cited by 1,183
Toward Lead-Free Perovskite Solar Cells
Giustino, F., & Snaith, H. J. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00499 · Cited by 1,141
Niu, G., Li, W., Meng, F., Wang, L., Dong, H., & Qiu, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13606j · Cited by 1,075
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
A molecularly engineered hole-transporting material for efficient perovskite solar cells
Saliba, M., Orlandi, S., Matsui, T., Aghazada, S., Cavazzini, M., Correa-Baena, J.-P., Gao, P., Scopelliti, R., Mosconi, E., Dahmen, K.-H., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.17 · Cited by 944
Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency
Qin, P., Tanaka, S., Ito, S., Tetreault, N., Manabe, K., Nishino, H., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Communications · doi:10.1038/ncomms4834 · Cited by 894
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Kato, Y., Ono, L. K., Lee, M. V., Wang, S., Raga, S. R., & Qi, Y. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500195 · Cited by 844
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Liu, J., Wu, Y., Qin, C., Yang, X., Yasuda, T., Islam, A., Zhang, K., Peng, W., Chen, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01589d · Cited by 719
Jeng, J., Chen, K., Chiang, T., Lin, P., Tsai, T., Chang, Y., Guo, T., Chen, P., Wen, T., & Hsu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306217 · Cited by 710
Self-citationAbate, A., Leijtens, T., Pathak, S., Teuscher, J., Avolio, R., Errico, M. E., Kirkpatrik, J., Ball, J. M., Docampo, P., McPherson, I., et al. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44397j · Cited by 674
High performance hybrid solar cells sensitized by organolead halide perovskites
Cai, B., Xing, Y., Yang, Z., Zhang, W.-H., & Qiu, J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40343b · Cited by 655
Wu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634
Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell
Norrman, K., Madsen, M. V., Gevorgyan, S. A., & Krebs, F. C. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106299g · Cited by 588
Ito, S., Tanaka, S., Manabe, K., & Nishino, H. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500449z · Cited by 585
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564
Zhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Huang, F., Dkhissi, Y., Huang, W., Xiao, M., Benesperi, I., Rubanov, S., Zhu, Y., Lin, X., Jiang, L., Zhou, Y., et al. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.015 · Cited by 547
Efficient Monolithic Perovskite/Silicon Tandem Solar Cell with Cell Area >1 cm2
Werner, J., Weng, C.-H., Walter, A., Fesquet, L., Seif, J. P., De Wolf, S., Niesen, B., & Ballif, C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02686 · Cited by 539
Solution-Processed Cu2O and CuO as Hole Transport Materials for Efficient Perovskite Solar Cells
Zuo, C., & Ding, L. (2015) · Small · doi:10.1002/smll.201501330 · Cited by 529
Xie, F., Chen, C., Wu, Y., Li, X., Cai, M., Liu, X., Yang, X., & Han, L. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01675a · Cited by 523
Tress, W., Marinova, N., Inganäs, O., Nazeeruddin, M. K., Zakeeruddin, S. M., & Graetzel, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400812 · Cited by 522
Guerrero, A., Garcia-Belmonte, G., Mora-Sero, I., Bisquert, J., Kang, Y. S., Jacobsson, T. J., Correa-Baena, J.-P., & Hagfeldt, A. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b01728 · Cited by 498
Control of I–V Hysteresis in CH3NH3PbI3 Perovskite Solar Cell
Kim, H.-S., Jang, I.-H., Ahn, N., Choi, M., Guerrero, A., Bisquert, J., & Park, N.-G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02273 · Cited by 478
Highly Efficient Flexible Perovskite Solar Cells Using Solution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Que, M., Xing, Y., Que, W., Niu, C., & Shao, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b08135 · Cited by 476
Self-citationYu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Compact Layer Free Perovskite Solar Cells with 13.5% Efficiency
Liu, D., Yang, J., & Kelly, T. L. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508758k · Cited by 460
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201503298 · Cited by 458
Zhu, Z., Bai, Y., Zhang, T., Liu, Z., Long, X., Wei, Z., Wang, Z., Zhang, L., Wang, J., Yan, F., et al. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405176 · Cited by 457
Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells
Chen, W., Liu, F., Feng, X., Djurišić, A. B., Chan, W. K., & He, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700722 · Cited by 457
A perspective on the production of dye-sensitized solar modules
Fakharuddin, A., Jose, R., Brown, T. M., Fabregat-Santiago, F., & Bisquert, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01724b · Cited by 447
Hole Selective NiO Contact for Efficient Perovskite Solar Cells with Carbon Electrode
Xu, X., Liu, Z., Zuo, Z., Zhang, M., Zhao, Z., Shen, Y., Zhou, H., Chen, Q., Yang, Y., & Wang, M. (2015) · Nano Letters · doi:10.1021/nl504701y · Cited by 445
p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Wang, K.-C., Jeng, J.-Y., Shen, P.-S., Chang, Y.-C., Diau, E. W.-G., Tsai, C.-H., Chao, T.-Y., Hsu, H.-C., Lin, P.-Y., Chen, P., et al. (2014) · Scientific Reports · doi:10.1038/srep04756 · Cited by 444
Self-citationWu, W.-Q., Wang, Q., Fang, Y., Shao, Y., Tang, S., Deng, Y., Lu, H., Liu, Y., Li, T., Yang, Z., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04028-8 · Cited by 430
Progress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Zang, Y., Li, C., Chueh, C., Williams, S. T., Jiang, W., Wang, Z., Yu, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201401992 · Cited by 422
P-type transparent conducting oxides
Zhang, K. H. L., Xi, K., Blamire, M. G., & Egdell, R. G. (2016) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/28/38/383002 · Cited by 412
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Seo, S., Park, I. J., Kim, M., Lee, S., Bae, C., Jung, H. S., Park, N.-G., Kim, J. Y., & Shin, H. (2016) · Nanoscale · doi:10.1039/c6nr01601d · Cited by 380
Copper oxide as inorganic hole transport material for lead halide perovskite based solar cells
Hossain, M. I., Alharbi, F. H., & Tabet, N. (2015) · Solar Energy · doi:10.1016/j.solener.2015.07.040 · Cited by 377
Wang, K.-C., Shen, P.-S., Li, M.-H., Chen, S., Lin, M.-W., Chen, P., & Guo, T.-F. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503610u · Cited by 358
Self-citationEnhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
Hwang, I., Jeong, I., Lee, J., Ko, M. J., & Yong, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04490 · Cited by 351
Inorganic Hole Conducting Layers for Perovskite-Based Solar Cells
Subbiah, A. S., Halder, A., Ghosh, S., Mahuli, N., Hodes, G., & Sarkar, S. K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500645n · Cited by 347
Dong, X., Fang, X., Lv, M., Lin, B., Zhang, S., Ding, J., & Yuan, N. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06128d · Cited by 341
Highly Efficient Flexible Perovskite Solar Cells UsingSolution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Meidan, Q., Yonglei, X., Que, W., Chunming, N., & Shao, J. (2016) · INDIGO (University of Illinois at Chicago) · doi:10.1021/acsnano.5b08135.s001 · Cited by 340
Self-citationIonic Reactivity at Contacts and Aging of Methylammonium Lead Triiodide Perovskite Solar Cells
Carrillo, J., Guerrero, A., Rahimnejad, S., Almora, O., Zarazua, I., Mas‐Marza, E., Bisquert, J., & Garcia‐Belmonte, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502246 · Cited by 339
Chiang, C.-H., Tseng, Z.-L., & Wu, C.-G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03674c · Cited by 338
Chatterjee, S., & Pal, A. J. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11540 · Cited by 327
Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells
Choi, H., Mai, C.-K., Kim, H.-B., Jeong, J., Song, S., Bazan, G. C., Kim, J. Y., & Heeger, A. J. (2015) · Nature Communications · doi:10.1038/ncomms8348 · Cited by 323
Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells
Chen, W., Wu, Y., Liu, J., Qin, C., Yang, X., Islam, A., Cheng, Y.-B., & Han, L. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02833c · Cited by 319
Cao, K., Zuo, Z., Cui, J., Shen, Y., Moehl, T., Zakeeruddin, S. M., Grätzel, M., & Wang, M. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.009 · Cited by 296
Sepalage, G. A., Meyer, S., Pascoe, A., Scully, A. D., Huang, F., Bach, U., Cheng, Y., & Spiccia, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502541 · Cited by 290
Chen, W.-Y., Deng, L.-L., Dai, S.-M., Wang, X., Tian, C.-B., Zhan, X.-X., Xie, S.-Y., Huang, R.-B., & Zheng, L.-S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05286f · Cited by 290
High-efficiency humidity-stable planar perovskite solar cells based on atomic layer architecture
Koushik, D., Verhees, W. J. H., Kuang, Y., Veenstra, S., Zhang, D., Verheijen, M. A., Creatore, M., & Schropp, R. E. I. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02687g · Cited by 285
Encapsulation for improving the lifetime of flexible perovskite solar cells
Weerasinghe, H. C., Dkhissi, Y., Scully, A. D., Caruso, R. A., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.006 · Cited by 284
Phase Stability and Transport Mechanisms in Antiperovskite Li3OCl and Li3OBr Superionic Conductors
Emly, A., Kioupakis, E., & der Ven, A. V. (2013) · Chemistry of Materials · doi:10.1021/cm4016222 · Cited by 283
Zheng, L., Chung, Y.-H., Ma, Y., Zhang, L., Xiao, L., Chen, Z., Wang, S., Qu, B., & Gong, Q. (2014) · Chem. Commun. · doi:10.1039/c4cc04680c · Cited by 275
Cao, J., Liu, Y.-M., Jing, X., Yin, J., Li, J., Xu, B., Tan, Y.-Z., & Zheng, N. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06493 · Cited by 263
Rao, H., Ye, S., Sun, W., Yan, W., Li, Y., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.044 · Cited by 261
Wijeyasinghe, N., Regoutz, A., Eisner, F., Du, T., Tsetseris, L., Lin, Y., Faber, H., Pattanasattayavong, P., Li, J., Yan, F., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701818 · Cited by 261
Sequential Deposition of CH3NH3PbI3 on Planar NiO Film for Efficient Planar Perovskite Solar Cells
Hu, L., Peng, J., Wang, W., Xia, Z., Yuan, J., Lu, J., Huang, X., Ma, W., Song, H., Chen, W., et al. (2014) · ACS Photonics · doi:10.1021/ph5000067 · Cited by 259
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500486 · Cited by 256
Nie, W., Tsai, H., Blancon, J., Liu, F., Stoumpos, C. C., Traore, B., Kepenekian, M., Durand, O., Katan, C., Tretiak, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201703879 · Cited by 250
Liu, Y., Chen, Q., Duan, H.-S., Zhou, H., Yang, Y. (., Chen, H., Luo, S., Song, T.-B., Dou, L., Hong, Z., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02502h · Cited by 238
Sun, W., Li, Y., Ye, S., Rao, H., Yan, W., Peng, H., Li, Y., Liu, Z., Wang, S., Chen, Z., et al. (2016) · Nanoscale · doi:10.1039/c6nr01927g · Cited by 236
Enhancing Stability of Perovskite Solar Cells to Moisture by the Facile Hydrophobic Passivation
고민재, 이진우, 정인영, et al. (2015) · Cited by 235
CH3NH3PbI3-Based Planar Solar Cells with Magnetron-Sputtered Nickel Oxide
Cui, J., Meng, F., Zhang, H., Cao, K., Yuan, H., Cheng, Y., Huang, F., & Wang, M. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am507108u · Cited by 231
Pattanasattayavong, P., Yaacobi‐Gross, N., Zhao, K., Ndjawa, G. O. N., Li, J., Yan, F., O'Regan, B. C., Amassian, A., & Anthopoulos, T. D. (2013) · Advanced Materials · doi:10.1002/adma.201202758 · Cited by 222
Ultrathin Cu2O as an efficient inorganic hole transporting material for perovskite solar cells
Yu, W., Li, F., Wang, H., Alarousu, E., Chen, Y., Lin, B., Wang, L., Hedhili, M. N., Li, Y., Wu, K., et al. (2016) · Nanoscale · doi:10.1039/c5nr07758c · Cited by 220
Kazim, S., Ramos, F. J., Gao, P., Nazeeruddin, M. K., Grätzel, M., & Ahmad, S. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00599j · Cited by 219
Li, W., Dong, H., Guo, X., Li, N., Li, J., Niu, G., & Wang, L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta05196c · Cited by 216
Thiols as interfacial modifiers to enhance the performance and stability of perovskite solar cells
Cao, J., Yin, J., Yuan, S., Zhao, Y., Li, J., & Zheng, N. (2015) · Nanoscale · doi:10.1039/c5nr01820j · Cited by 212
Leijtens, T., Giovenzana, T., Habisreutinger, S. N., Tinkham, J. S., Noel, N. K., Kamino, B. A., Sadoughi, G., Sellinger, A., & Snaith, H. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10093 · Cited by 211
Seo, S., Jeong, S., Bae, C., Park, N., & Shin, H. (2018) · Advanced Materials · doi:10.1002/adma.201801010 · Cited by 211
Graphene–Perovskite Solar Cells Exceed 18 % Efficiency: A Stability Study
Agresti, A., Pescetelli, S., Taheri, B., Del Rio Castillo, A. E., Cinà, L., Bonaccorso, F., & Di Carlo, A. (2016) · ChemSusChem · doi:10.1002/cssc.201600942 · Cited by 200
Pattanasattayavong, P., Ndjawa, G. O. N., Zhao, K., Chou, K. W., Yaacobi-Gross, N., O'Regan, B. C., Amassian, A., & Anthopoulos, T. D. (2013) · Chem. Commun. · doi:10.1039/c2cc37065d · Cited by 192
Organo-metal halide perovskite-based solar cells with CuSCN as the inorganic hole selective contact
Chavhan, S. D., Miguel, O., Grande, H., Pedro, V. G., Sánchez, R. S., Barea, E. M., Mora‐Seró, I., & Tena‐Zaera, R. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01310g · Cited by 190
Thermal Stability of CuSCN Hole Conductor‐Based Perovskite Solar Cells
Jung, M., Kim, Y. C., Jeon, N. J., Yang, W. S., Seo, J., Noh, J. H., & Il Seok, S. (2016) · ChemSusChem · doi:10.1002/cssc.201600957 · Cited by 188
Caesium for Perovskite Solar Cells: An Overview
Bella, F., Renzi, P., Cavallo, C., & Gerbaldi, C. (2018) · Chemistry – A European Journal · doi:10.1002/chem.201801096 · Cited by 176
Bashir, A., Shukla, S., Lew, J. H., Shukla, S., Bruno, A., Gupta, D., Baikie, T., Patidar, R., Akhter, Z., Priyadarshi, A., et al. (2017) · Nanoscale · doi:10.1039/c7nr08289d · Cited by 146
Casas, G., Cappelletti, M. Á., Cédola, A. P., Soucase, B. M., & y Blanca, E. L. P. (2017) · Superlattices and Microstructures · doi:10.1016/j.spmi.2017.04.007 · Cited by 135
Nano-structured CuO-Cu2O Complex Thin Film for Application in CH3NH3PbI3 Perovskite Solar Cells
Chen, L.-C., Chen, C.-C., Liang, K.-C., Chang, S. H., Tseng, Z.-L., Yeh, S.-C., Chen, C., Wu, W., & Wu, C. (2016) · Nanoscale Research Letters · doi:10.1186/s11671-016-1621-4 · Cited by 121
Corani, A., Li, M.-H., Shen, P., Chen, P., Guo, T., Nahhas, A. E., Zheng, K., Yartsev, A. P., Sundström, V., & Ponseca, C. S. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00238 · Cited by 115
Self-citationDipole-field-assisted charge extraction in metal-perovskite-metal back-contact solar cells
Lin, X., Jumabekov, A. N., Lal, N., Pascoe, A. R., Gómez, D. E., Duffy, N. W., Chesman, A. S. R., Sears, K., Fournier, M., Zhang, Y., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00588-3 · Cited by 115
A–D–A-type S,N-heteropentacene-based hole transport materials for dopant-free perovskite solar cells
Steck, C., Franckevičius, M., Zakeeruddin, S. M., Mishra, A., Bäuerle, P., & Grätzel, M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03865k · Cited by 113
Wei, D., Wang, T., Ji, J., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08622a · Cited by 110
The essential role of the poly(3-hexylthiophene) hole transport layer in perovskite solar cells
Zhang, Y., Liu, W., Tan, F., & Gu, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.145 · Cited by 97
Peng, H., Sun, W., Li, Y., Ye, S., Rao, H., Yan, W., Zhou, H., Bian, Z., & Huang, C. (2016) · Nano Research · doi:10.1007/s12274-016-1181-z · Cited by 96
Yu, Z., Fu, W., Liu, W., et al. (2016) · Chinese Chemical Letters · doi:10.1016/j.cclet.2016.06.021 · Cited by 90
Qin, P.-L., He, Q., Chen, C., Zheng, X.-L., Yang, G., Tao, H., Xiong, L.-B., Xiong, L., Li, G., & Fang, G.-J. (2017) · Solar RRL · doi:10.1002/solr.201700058 · Cited by 84
Ito, S., Tanaka, S., & Nishino, H. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00122 · Cited by 82
Solid‐State Perovskite‐Sensitized p‐Type Mesoporous Nickel Oxide Solar Cells
Tian, H., Xu, B., Chen, H., Johansson, E. M. J., & Boschloo, G. K. (2014) · ChemSusChem · doi:10.1002/cssc.201402032 · Cited by 79
New Hybrid Hole Extraction Layer of Perovskite Solar Cells with a Planar p–i–n Geometry
Park, I. J., Park, M. A., Kim, D. H., Park, G. D., Kim, B. J., Son, H. J., Ko, M. J., Lee, D., Park, T., Shin, H., et al. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b09322 · Cited by 75
Cohen, B., Aharon, S., Dymshits, A., et al. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b10994 · Cited by 72
NiO/MAPbI3-xClx/PCBM: A Model Case for an Improved Understanding of Inverted Mesoscopic Solar Cells
Trifiletti, V., Roiati, V., Colella, S., Giannuzzi, R., Marco, L. D., Rizzo, A., Manca, M., Listorti, A., & Gigli, G. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508678p · Cited by 62
Research Update: Behind the high efficiency of hybrid perovskite solar cells
Fakharuddin, A., Rossi, F. D., Watson, T., Schmidt‐Mende, L., & Jose, R. (2016) · APL Materials · doi:10.1063/1.4962143 · Cited by 58
Chiang, Y.-H., Shih, C.-K., Sie, A.-S., Li, M.-H., Peng, C.-C., Shen, P., Wang, Y.-P., Guo, T., & Chen, P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07775k · Cited by 56
Self-citationMultiple stress degradation analysis of the active layer in organic photovoltaics
Turkovic, V., Engmann, S., Egbe, D. A. M., Himmerlich, M., Krischok, S., Gobsch, G., & Hoppe, H. (2013) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.10.016 · Cited by 37
Li, M.-H., Yang, Y.-S., Wang, K.-C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12367 · Cited by 34
Self-citation
Cited by
Stability of perovskite solar cells: issues and prospects
Chowdhury, T. A., Bin Zafar, M. A., Sajjad-Ul Islam, M., Shahinuzzaman, M., Islam, M. A., & Khandaker, M. U. (2023) · RSC Advances · doi:10.1039/d2ra05903g · Cited by 444
Deepthi Jayan, K., & Sebastian, V. (2021) · Solar Energy · doi:10.1016/j.solener.2021.01.058 · Cited by 433
Lead‐Free Double Perovskites for Perovskite Solar Cells
Kung, P.-K., Li, M.-H., Lin, P.-Y., Jhang, J.-Y., Pantaler, M., Lupascu, D. C., Grancini, G., & Chen, P. (2020) · Solar RRL · doi:10.1002/solr.201900306 · Cited by 290
Self-citationPTAA as Efficient Hole Transport Materials in Perovskite Solar Cells: A Review
Wang, Y., Duan, L., Zhang, M., Hameiri, Z., Liu, X., Bai, Y., & Hao, X. (2022) · Solar RRL · doi:10.1002/solr.202200234 · Cited by 277
Research Direction toward Scalable, Stable, and High Efficiency Perovskite Solar Cells
Park, N. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903106 · Cited by 268
Metadata
- Authors
- Kung, P., Li, M., Lin, P., Chiang, Y., Chan, C., Guo, T., & Chen, P.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2018-10-19
- Volume
- 5
- Issue
- 22
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W2896642565
- Cited by
- 293
- References
- 128
- FWCI
- 11.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.