The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Surface Modification of a MXene by an Aminosilane Coupling Agent
Open accessAbstract
MXenes, two‐dimensional (2D) transition metal carbides and/or nitrides, possess surface termination groups such as hydroxyl, oxygen, and fluorine, which are available for surface functionalization. Their surface chemistry is critical in many applications. This article reports amine functionalization of Ti 3 C 2 Tx MXene surface with [3‐(2‐aminoethylamino)‐propyl]trimethoxysilane (AEAPTMS). Characterization techniques such as X‐ray photoelectron spectroscopy verify the success of the surface functionalization and confirm that the silane coupling agent bonds to Ti 3 C 2 Tx surface both physically and chemically. The functionalization changes the MXene surface charge from −35 to +25 mV at neutral pH, which allows for in situ preparation of self‐assembled films. Further, surface charge measurements of the functionalized MXene at different pH values show that the functionalized MXene has an isoelectric point at a pH around 10.7, and the highest reported positive surface charge of +62 mV at a pH of 2.58. Furthermore, the existence of a mixture of different orientations of AEAPTMS and the simultaneous presence of protonated and free amine groups on the surface of Ti 3 C 2 Tx are demonstrated. The availability of free amine groups on the surface potentially permits the fabrication of crosslinked electrically conductive MXene/epoxy composites, dye adsorbents, high‐performance membranes, and drug carriers. Surface modifications of this type are applicable to many other MXenes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citation25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Self-citationFulmer, G. R., Miller, A. J. M., Sherden, N. H., Gottlieb, H. E., Nudelman, A., Stoltz, B. M., Bercaw, J. E., & Goldberg, K. I. (2010) · Organometallics · doi:10.1021/om100106e · Cited by 4,050
Plueddemann, E. P. (1982) · Springer eBooks · doi:10.1007/978-1-4899-0342-6 · Cited by 2,719
Evolution of nitrogen functionalities in carbonaceous materials during pyrolysis
Pels, J. R., Kapteijn, F., Moulijn, J. A., Zhu, Q., & Thomas, K. M. (1995) · Carbon · doi:10.1016/0008-6223(95)00154-6 · Cited by 2,041
Oxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Self-citationProperties and emerging applications of self-assembled structures made from inorganic nanoparticles
Nie, Z., Petukhova, A., & Kumacheva, E. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.453 · Cited by 1,598
Control of MXenes’ electronic properties through termination and intercalation
Hart, J. L., Hantanasirisakul, K., Lang, A. C., Anasori, B., Pinto, D., Pivak, Y., van Omme, J. T., May, S. J., Gogotsi, Y., & Taheri, M. L. (2019) · Nature Communications · doi:10.1038/s41467-018-08169-8 · Cited by 1,342
Self-citationCharge- and Size-Selective Ion Sieving Through Ti3C2Tx MXene Membranes
Ren, C. E., Hatzell, K. B., Alhabeb, M., Ling, Z., Mahmoud, K. A., & Gogotsi, Y. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01895 · Cited by 1,030
Self-citationLarge-scale delamination of multi-layers transition metal carbides and carbonitrides “MXenes”
Naguib, M., Unocic, R. R., Armstrong, B. L., & Nanda, J. (2015) · Dalton Transactions · doi:10.1039/c5dt01247c · Cited by 964
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Li, Z., Wang, L., Sun, D., Zhang, Y., Liu, B., Hu, Q., & Zhou, A. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.10.009 · Cited by 928
Xie, X., Zhao, M.-Q., Anasori, B., Maleski, K., Ren, C. E., Li, J., Byles, B. W., Pomerantseva, E., Wang, G., & Gogotsi, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.005 · Cited by 903
Self-citationXPS of nitrogen-containing functional groups on activated carbon
Jansen, R. J. J., & van Bekkum, H. (1995) · Carbon · doi:10.1016/0008-6223(95)00030-h · Cited by 867
Recent advance in MXenes: A promising 2D material for catalysis, sensor and chemical adsorption
Zhu, J., Ha, E., Zhao, G., Zhou, Y., Huang, D., Yue, G., Hu, L., Sun, N., Wang, Y., Lee, L. Y. S., et al. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.09.012 · Cited by 659
Huang, S.-H., & Chen, D.-H. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.06.075 · Cited by 626
Functionalization of carbon nanotubes using a silane coupling agent
Ma, P. C., Kim, J.-K., & Tang, B. Z. (2006) · Carbon · doi:10.1016/j.carbon.2006.06.032 · Cited by 578
2D Metal Carbides and Nitrides (MXenes): Structure, Properties and Applications
(2019) · Springer eBooks · doi:10.1007/978-3-030-19026-2 · Cited by 496
Liu, R., & Li, W. (2018) · ACS Omega · doi:10.1021/acsomega.7b02001 · Cited by 487
Zhao, J., Yang, Y., Yang, C., Tian, Y., Han, Y., Liu, J., Yin, X., & Que, W. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05569f · Cited by 484
Biofunctionalized two-dimensional Ti3C2 MXenes for ultrasensitive detection of cancer biomarker
Kumar, S., Lei, Y., Alshareef, N. H., Quevedo-Lopez, M. A., & Salama, K. N. (2018) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.08.076 · Cited by 463
Zhu, M., Lerum, M. Z., & Chen, W. (2012) · Langmuir · doi:10.1021/la203638g · Cited by 461
Thick and freestanding MXene/PANI pseudocapacitive electrodes with ultrahigh specific capacitance
VahidMohammadi, A., Moncada, J., Chen, H., Kayali, E., Orangi, J., Carrero, C. A., & Beidaghi, M. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta05807e · Cited by 417
Malaki, M., Maleki, A., & Varma, R. S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta01850f · Cited by 416
Cao, Y., Deng, Q., Liu, Z., Shen, D., Wang, T., Huang, Q., Du, S., Jiang, N., Lin, C.-T., & Yu, J. (2017) · RSC Advances · doi:10.1039/c7ra00184c · Cited by 414
Wang, X., Xing, W., Zhang, P., Song, L., Yang, H., & Hu, Y. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.01.027 · Cited by 408
Antimicrobial Mode-of-Action of Colloidal Ti3C2Tx MXene Nanosheets
Arabi Shamsabadi, A., Sharifian Gh., M., Anasori, B., & Soroush, M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03823 · Cited by 340
Self-citationThe assignment of IR absorption bands due to free hydroxyl groups in cellulose
KONDO, T. (1997) · Cellulose · doi:10.1023/a:1018448109214 · Cited by 333
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
Surface modification of Fe3O4@SiO2 microsphere by silane coupling agent
Ahangaran, F., Hassanzadeh, A., & Nouri, S. (2013) · International Nano Letters · doi:10.1186/2228-5326-3-23 · Cited by 310
Zhou, Z., Liu, J., Zhang, X., Tian, D., Zhan, Z., & Lu, C. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802040 · Cited by 301
Seyedin, S., Yanza, E. R. S., & Razal, J. M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08355f · Cited by 279
Silane adsorption onto cellulose fibers: Hydrolysis and condensation reactions
Brochier Salon, M.-C., Abdelmouleh, M., Boufi, S., Belgacem, M. N., & Gandini, A. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.03.070 · Cited by 255
Shape-Adaptable 2D Titanium Carbide (MXene) Heater
Park, T. H., Yu, S., Koo, M., Kim, H., Kim, E. H., Park, J.-E., Ok, B., Kim, B., Noh, S. H., Park, C., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b01602 · Cited by 227
Cao, W.-T., Feng, W., Jiang, Y.-Y., Ma, C., Zhou, Z.-F., Ma, M.-G., Chen, Y., & Chen, F. (2019) · Materials Horizons · doi:10.1039/c8mh01566j · Cited by 187
2D Ti3C2 MXene/WO3 Hybrid Architectures for High‐Rate Supercapacitors
Ambade, S. B., Ambade, R. B., Eom, W., Noh, S. H., Kim, S. H., & Han, T. H. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201801361 · Cited by 163
Liu, X., Xing, J., Guan, Y., Shan, G., & Liu, H. (2004) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.03.004 · Cited by 149
Interfacial Assembly of Ultrathin, Functional MXene Films
Kim, S. J., Choi, J., Maleski, K., Hantanasirisakul, K., Jung, H., Gogotsi, Y. G., & Ahn, C. W. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12539 · Cited by 137
Self-citationEffect of Synthesis on Performance of MXene/Iron Oxide Anode Material for Lithium-Ion Batteries
Ali, A., Hantanasirisakul, K., Abdala, A. A., Urbankowski, P., Zhao, M., Anasori, B., Gogotsi, Y. G., Aïssa, B., & Mahmoud, K. A. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b01953 · Cited by 100
Self-citationNovel 2D Nanosheets with Potential Applications in Heavy Metal Purification: A Review
Fu, L., Yan, Z., Zhao, Q., & Yang, H. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201801094 · Cited by 95
Stable colloidal dispersion of octylated Ti3C2-MXenes in a nonpolar solvent
Lim, S., Park, H., Yang, J., Kwak, C., & Lee, J. (2019) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2019.123648 · Cited by 82
Mn2+-Assisted DNA Oligonucleotide Adsorption on Ti2C MXene Nanosheets
Huang, Z., Liu, B., & Liu, J. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01810 · Cited by 46
Lu, M. X., Han, W., Li, H., Li, H., Zhang, B., Zhang, W., & Zheng, W. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900160 · Cited by 37
Cited by
Characterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Self-citationA Review on MXene Synthesis, Stability, and Photocatalytic Applications
Murali, G., Reddy Modigunta, J. K., Park, Y. H., Lee, J.-H., Rawal, J., Lee, S.-Y., In, I., & Park, S.-J. (2022) · ACS Nano · doi:10.1021/acsnano.2c04750 · Cited by 668
Chen, W. Y., Lai, S.-N., Yen, C.-C., Jiang, X., Peroulis, D., & Stanciu, L. A. (2020) · ACS Nano · doi:10.1021/acsnano.0c03896 · Cited by 446
MXenes: New Horizons in Catalysis
Morales-García, Á., Calle-Vallejo, F., & Illas, F. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03106 · Cited by 443
Feng, Y., Wang, H., Xu, J., Du, X., Cheng, X., Du, Z., & Wang, H. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125777 · Cited by 397
Metadata
- Authors
- Riazi, H., Anayee, M., Hantanasirisakul, K., Shamsabadi, A. A., Anasori, B., Gogotsi, Y., & Soroush, M.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2020-02-03
- Volume
- 7
- Issue
- 6
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W3003790969
- Cited by
- 316
- References
- 42
- FWCI
- 11.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.