The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Liquid Metal Direct Write and 3D Printing: A Review
Abstract
This review discusses methods, challenges, and opportunities for direct‐write and 3D printing of low melting point, gallium‐based liquid metal alloys at room temperature. Alloys of gallium exhibit high conductivity and high stretchability making them well suited for use in soft circuitry for stretchable electronics and soft robotics. In addition, the liquid nature of the metal enables entirely new ways to pattern metals at room temperature; herein, the focus is placed on additive printing via nozzle‐based methods. Room temperature printing of liquid metals enables rapid fabrication of complex geometries (with dimensions as small as 10 µm) on a wide range of materials, such as polymers. These processes can be used to make metallic conductors for devices with self‐healing capabilities, soft/stretchable electrodes, and sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
The International Temperature Scale of 1990 (ITS-90)
Preston-Thomas, H. (1990) · Metrologia · doi:10.1088/0026-1394/27/1/002 · Cited by 1,756
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Dickey, M. D., Chiechi, R. C., Larsen, R. J., Weiss, E. A., Weitz, D. A., & Whitesides, G. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701216 · Cited by 1,468
Self-citationA Rubberlike Stretchable Active Matrix Using Elastic Conductors
Sekitani, T., Noguchi, Y., Hata, K., Fukushima, T., Aida, T., & Someya, T. (2008) · Science · doi:10.1126/science.1160309 · Cited by 1,366
Markvicka, E. J., Bartlett, M. D., Huang, X., & Majidi, C. (2018) · Nature Materials · doi:10.1038/s41563-018-0084-7 · Cited by 1,067
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Self-citationCharacterization of Nontoxic Liquid-Metal Alloy Galinstan for Applications in Microdevices
Liu, T., Sen, P., & Kim, C.-J. (2012) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2011.2174421 · Cited by 719
Ultrastretchable Fibers with Metallic Conductivity Using a Liquid Metal Alloy Core
Zhu, S., So, J., Mays, R., Desai, S., Barnes, W. R., Pourdeyhimi, B., & Dickey, M. D. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202405 · Cited by 638
Self-citationDirect Writing of Gallium‐Indium Alloy for Stretchable Electronics
Boley, J. W., White, E. L., Chiu, G. T. ‐., & Kramer, R. K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303220 · Cited by 546
Liu, Y.-J., Cao, W.-T., Ma, M.-G., & Wan, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07639 · Cited by 544
Hyperelastic pressure sensing with a liquid-embedded elastomer
Park, Y.-L., Majidi, C., Kramer, R., Bérard, P., & Wood, R. J. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/12/125029 · Cited by 513
Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
M’Barki, A., Bocquet, L., & Stevenson, A. (2017) · Scientific Reports · doi:10.1038/s41598-017-06115-0 · Cited by 471
Mechanically Sintered Gallium–Indium Nanoparticles
Boley, J. W., White, E. L., & Kramer, R. K. (2015) · Advanced Materials · doi:10.1002/adma.201404790 · Cited by 439
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
Liquid‐Phase Metal Inclusions for a Conductive Polymer Composite
Fassler, A., & Majidi, C. (2015) · Advanced Materials · doi:10.1002/adma.201405256 · Cited by 409
Direct Desktop Printed-Circuits-on-Paper Flexible Electronics
Zheng, Y., He, Z., Gao, Y., & Liu, J. (2013) · Scientific Reports · doi:10.1038/srep01786 · Cited by 370
High-resolution, reconfigurable printing of liquid metals with three-dimensional structures
Park, Y.-G., An, H. S., Kim, J.-Y., & Park, J.-U. (2019) · Science Advances · doi:10.1126/sciadv.aaw2844 · Cited by 367
Stretchable Capacitive Sensors of Torsion, Strain, and Touch Using Double Helix Liquid Metal Fibers
Cooper, C. B., Arutselvan, K., Liu, Y., Armstrong, D., Lin, Y., Khan, M. R., Genzer, J., & Dickey, M. D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605630 · Cited by 365
Self-citationThree-dimensional nanonetworks for giant stretchability in dielectrics and conductors
Park, J., Wang, S., Li, M., Ahn, C., Hyun, J. K., Kim, D. S., Kim, D. K., Rogers, J. A., Huang, Y., & Jeon, S. (2012) · Nature Communications · doi:10.1038/ncomms1929 · Cited by 334
Methods to pattern liquid metals
Joshipura, I. D., Ayers, H. R., Majidi, C., & Dickey, M. D. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc00330j · Cited by 326
Self-citationX-ray study of the oxidation of liquid-gallium surfaces
Regan, M. J., Tostmann, H., Pershan, P. S., Magnussen, O. M., DiMasi, E., Ocko, B. M., & Deutsch, M. (1997) · Physical Review B · doi:10.1103/physrevb.55.10786 · Cited by 325
Handwritten, Soft Circuit Boards and Antennas Using Liquid Metal Nanoparticles
Lin, Y., Cooper, C., Wang, M., Adams, J. J., Genzer, J., & Dickey, M. D. (2015) · Small · doi:10.1002/smll.201502692 · Cited by 310
Self-citationLiquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
Tabatabai, A., Fassler, A., Usiak, C., & Majidi, C. (2013) · Langmuir · doi:10.1021/la401245d · Cited by 293
Masked Deposition of Gallium‐Indium Alloys for Liquid‐Embedded Elastomer Conductors
Kramer, R. K., Majidi, C., & Wood, R. J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203589 · Cited by 288
Liu, S., Yuen, M. C., White, E. L., Boley, J. W., Deng, B., Cheng, G. J., & Kramer-Bottiglio, R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08722 · Cited by 283
Cytotoxicity of Gallium–Indium Liquid Metal in an Aqueous Environment
Kim, J.-H., Kim, S., So, J.-H., Kim, K., & Koo, H.-J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02320 · Cited by 272
Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing
Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900975 · Cited by 258
Shape-transformable liquid metal nanoparticles in aqueous solution
Lin, Y., Liu, Y., Genzer, J., & Dickey, M. D. (2017) · Chemical Science · doi:10.1039/c7sc00057j · Cited by 253
Self-citationEGaIn–Metal Interfacing for Liquid Metal Circuitry and Microelectronics Integration
Ozutemiz, K. B., Wissman, J., Ozdoganlar, O. B., & Majidi, C. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701596 · Cited by 251
Electrical Resistance of AgTS–S(CH2)n−1CH3//Ga2O3/EGaIn Tunneling Junctions
Cademartiri, L., Thuo, M. M., Nijhuis, C. A., Reus, W. F., Tricard, S., Barber, J. R., Sodhi, R. N. S., Brodersen, P., Kim, C., Chiechi, R. C., et al. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp212501s · Cited by 239
High‐Density Soft‐Matter Electronics with Micron‐Scale Line Width
Gozen, B. A., Tabatabai, A., Ozdoganlar, O. B., & Majidi, C. (2014) · Advanced Materials · doi:10.1002/adma.201400502 · Cited by 238
On the resistivity and surface tension of the eutectic alloy of gallium and indium
Zrnic, D., & Swatik, D. S. (1969) · Journal of the Less Common Metals · doi:10.1016/0022-5088(69)90121-0 · Cited by 231
A multiaxial stretchable interconnect using liquid-alloy-filled elastomeric microchannels
Kim, H.-J., Son, C., & Ziaie, B. (2008) · Applied Physics Letters · doi:10.1063/1.2829595 · Cited by 225
Viscosity effect on GaInSn studied by XPS
Scharmann, F., Cherkashinin, G., Breternitz, V., Knedlik, C., Hartung, G., Weber, T., & Schaefer, J. A. (2004) · Surface and Interface Analysis · doi:10.1002/sia.1817 · Cited by 219
Liquid alloy printing of microfluidic stretchable electronics
Jeong, S. H., Hagman, A., Hjort, K., Jobs, M., Sundqvist, J., & Wu, Z. (2012) · Lab on a Chip · doi:10.1039/c2lc40628d · Cited by 218
Direct Writing of Flexible Electronics through Room Temperature Liquid Metal Ink
Gao, Y., Li, H., & Liu, J. (2012) · PLoS ONE · doi:10.1371/journal.pone.0045485 · Cited by 210
3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels
Parekh, D. P., Ladd, C., Panich, L., Moussa, K., & Dickey, M. D. (2016) · Lab on a Chip · doi:10.1039/c6lc00198j · Cited by 205
Self-citationA Versatile Approach for Direct Patterning of Liquid Metal Using Magnetic Field
Ma, B., Xu, C., Chi, J., Chen, J., Zhao, C., & Liu, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901370 · Cited by 204
Park, Y.-G., Min, H., Kim, H., Zhexembekova, A., Lee, C. Y., & Park, J.-U. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b00150 · Cited by 200
Foresti, D., Kroll, K. T., Amissah, R., Sillani, F., Homan, K. A., Poulikakos, D., & Lewis, J. A. (2018) · Science Advances · doi:10.1126/sciadv.aat1659 · Cited by 195
Liquid metal actuation by electrical control of interfacial tension
Eaker, C. B., & Dickey, M. D. (2016) · Applied Physics Reviews · doi:10.1063/1.4959898 · Cited by 183
Self-citationViscoelastic properties of oxide-coated liquid metals
Larsen, R. J., Dickey, M. D., Whitesides, G. M., & Weitz, D. A. (2009) · Journal of Rheology · doi:10.1122/1.3236517 · Cited by 181
Self-citationRecent progress on liquid metals and their applications
Bo, G., Ren, L., Xu, X., Du, Y., & Dou, S. (2018) · Advances in Physics: X · doi:10.1080/23746149.2018.1446359 · Cited by 172
Li, G., Wu, X., & Lee, D.-W. (2016) · Lab on a Chip · doi:10.1039/c6lc00046k · Cited by 161
Oxide rupture-induced conductivity in liquid metal nanoparticles by laser and thermal sintering
Liu, S., Reed, S. N., Higgins, M. J., Titus, M. S., & Kramer-Bottiglio, R. (2019) · Nanoscale · doi:10.1039/c9nr03903a · Cited by 158
Lee, S., Kim, H., Won, D., Lee, J., & Kim, J. (2016) · Microfluidics and Nanofluidics · doi:10.1007/s10404-015-1676-z · Cited by 144
Jeong, S. H., Hjort, K., & Wu, Z. (2015) · Scientific Reports · doi:10.1038/srep08419 · Cited by 141
Recoverable Liquid Metal Paste with Reversible Rheological Characteristic for Electronics Printing
Chang, H., Zhang, P., Guo, R., Cui, Y., Hou, Y., Sun, Z., & Rao, W. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20430 · Cited by 139
Advanced Support Structures for Enhanced Catalytic Activity
Stuecker, J. N., Miller, J. E., Ferrizz, R. E., Mudd, J. E., & Cesarano, J. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030291v · Cited by 131
Liquid metal particle popping: Macroscale to nanoscale
Lear, T. R., Hyun, S., Boley, J. W., White, E. L., Thompson, D. H., & Kramer, R. K. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.02.009 · Cited by 123
On-skin liquid metal inertial sensor
Varga, M., Ladd, C., Ma, S., Holbery, J., & Tröster, G. (2017) · Lab on a Chip · doi:10.1039/c7lc00735c · Cited by 108
Direct Wiring of Eutectic Gallium–Indium to a Metal Electrode for Soft Sensor Systems
Kim, S., Oh, J., Jeong, D., & Bae, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05363 · Cited by 99
3D-Printed Liquid Metal Interconnects for Stretchable Electronics
Votzke, C., Daalkhaijav, U., Mengüç, Y., & Johnston, M. L. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2894405 · Cited by 98
Joshipura, I. D., Ayers, H. R., Castillo, G. A., Ladd, C., Tabor, C. E., Adams, J. J., & Dickey, M. D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13099 · Cited by 95
Self-citationStretchable Thermoelectric Generators Metallized with Liquid Alloy
Jeong, S. H., Cruz, F. J., Chen, S., Gravier, L., Liu, J., Wu, Z., Hjort, K., Zhang, S., & Zhang, Z.-B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04752 · Cited by 94
French, S. J., Saunders, D. J., & Ingle, G. W. (1938) · The Journal of Physical Chemistry · doi:10.1021/j100897a011 · Cited by 90
Patterned Liquid Metal Contacts for Printed Carbon Nanotube Transistors
Andrews, J. B., Mondal, K., Neumann, T. V., Cardenas, J. A., Wang, J. L., Parekh, D. P., Lin, Y., Ballentine, P., Dickey, M. D., & Franklin, A. D. (2018) · ACS Nano · doi:10.1021/acsnano.8b00909 · Cited by 90
Self-citationSoft and Deformable Sensors Based on Liquid Metals
Kim, T., Kim, D.-M., Lee, B. J., & Lee, J. (2019) · Sensors · doi:10.3390/s19194250 · Cited by 83
Direct metal writing: Controlling the rheology through microstructure
Chen, W., Thornley, L., Coe, H. G., Tonneslan, S. J., Vericella, J. J., Zhu, C. Y., Duoss, E. B., Hunt, R., Wight, M. J., Apelian, D., et al. (2017) · Applied Physics Letters · doi:10.1063/1.4977555 · Cited by 79
An oxidized liquid metal-based microfluidic platform for tunable electronic device applications
Li, G., Parmar, M., & Lee, D. (2014) · Lab on a Chip · doi:10.1039/c4lc01013b · Cited by 67
Weiss, E. A., Chiechi, R. C., Geyer, S. M., Porter, V. J., Bell, D. C., Bawendi, M. G., & Whitesides, G. M. (2007) · Journal of the American Chemical Society · doi:10.1021/ja076438h · Cited by 67
Microencapsulation of gallium–indium (Ga–In) liquid metal for self-healing applications
Blaiszik, B. J., Jones, A. R., Sottos, N. R., & White, S. R. (2014) · Journal of Microencapsulation · doi:10.3109/02652048.2013.858790 · Cited by 66
Kim, D., Yoon, Y. J., Kauh, S. K., & Lee, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800380 · Cited by 64
High‐Resolution Liquid Alloy Patterning for Small Stretchable Strain Sensor Arrays
Sahlberg, A., Nilsson, F. A. M., Berglund, A., Nguyen, H., Hjort, K., & Jeong, S. H. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700330 · Cited by 27
Wang, B., Wu, K., Hjort, K., Guo, C. F., & Wu, Z. (2019) · Soft Robotics · doi:10.1089/soro.2018.0008 · Cited by 22
On-Demand Multi-Resolution Liquid Alloy Printing Based on Viscoelastic Flow Squeezing
Wu, K., Zhang, P., Li, F., Guo, C. F., & Wu, Z. (2018) · Polymers · doi:10.3390/polym10030330 · Cited by 11
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Shaping a Soft Future: Patterning Liquid Metals
Ma, J., Krisnadi, F., Vong, M. H., Kong, M., Awartani, O. M., & Dickey, M. D. (2023) · Advanced Materials · doi:10.1002/adma.202205196 · Cited by 311
Self-citationGallium Liquid Metal: The Devil's Elixir
Tang, S.-Y., Tabor, C., Kalantar-Zadeh, K., & Dickey, M. D. (2021) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080819-125403 · Cited by 305
Self-citationInnervated, Self‐Sensing Liquid Crystal Elastomer Actuators with Closed Loop Control
Kotikian, A., Morales, J. M., Lu, A., Mueller, J., Davidson, Z. S., Boley, J. W., & Lewis, J. A. (2021) · Advanced Materials · doi:10.1002/adma.202101814 · Cited by 305
Smart Eutectic Gallium–Indium: From Properties to Applications
Zhao, Z., Soni, S., Lee, T., Nijhuis, C. A., & Xiang, D. (2023) · Advanced Materials · doi:10.1002/adma.202203391 · Cited by 300
Metadata
- Authors
- Neumann, T. V., & Dickey, M. D.
- Venue
- Advanced Materials Technologies
- Publisher
- Wiley
- Published
- 2020-06-09
- Volume
- 5
- Issue
- 9
- ISSN
- 2365-709X (ISSN-L)
- OpenAlex
- W3034390642
- Cited by
- 332
- References
- 67
- FWCI
- 14.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.