The DOI matches its Crossref record; 146 of the 146 references it cites were found in a registry or an index.
Interfacial Materials for Organic Solar Cells: Recent Advances and Perspectives
Open accessAbstract
Organic solar cells (OSCs) have shown great promise as low‐cost photovoltaic devices for solar energy conversion over the past decade. Interfacial engineering provides a powerful strategy to enhance efficiency and stability of OSCs. With the rapid advances of interface layer materials and active layer materials, power conversion efficiencies (PCEs) of both single‐junction and tandem OSCs have exceeded a landmark value of 10%. This review summarizes the latest advances in interfacial layers for single‐junction and tandem OSCs. Electron or hole transporting materials, including metal oxides, polymers/small‐molecules, metals and metal salts/complexes, carbon‐based materials, organic‐inorganic hybrids/composites, and other emerging materials, are systemically presented as cathode and anode interface layers for high performance OSCs. Meanwhile, incorporating these electron‐transporting and hole‐transporting layer materials as building blocks, a variety of interconnecting layers for conventional or inverted tandem OSCs are comprehensively discussed, along with their functions to bridge the difference between adjacent subcells. By analyzing the structure–property relationships of various interfacial materials, the important design rules for such materials towards high efficiency and stable OSCs are highlighted. Finally, we present a brief summary as well as some perspectives to help researchers understand the current challenges and opportunities in this emerging area of research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Plasmonics for improved photovoltaic devices
Atwater, H. A., & Polman, A. (2010) · Nature Materials · doi:10.1038/nmat2629 · Cited by 8,337
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Two-layer organic photovoltaic cell
Tang, C. W. (1986) · Applied Physics Letters · doi:10.1063/1.96937 · Cited by 5,002
Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Chemistry · doi:10.1038/nchem.1861 · Cited by 4,473
Li, G., Zhu, R., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.11 · Cited by 4,414
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Park, S. H., Roy, A., Beaupré, S., Cho, S., Coates, N., Moon, J. S., Moses, D., Leclerc, M., Lee, K., & Heeger, A. J. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.69 · Cited by 4,073
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
He, Z., Zhong, C., Su, S., Xu, M., Wu, H., & Cao, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.190 · Cited by 3,764
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing
Kim, J. Y., Lee, K., Coates, N. E., Moses, D., Nguyen, T.-Q., Dante, M., & Heeger, A. J. (2007) · Science · doi:10.1126/science.1141711 · Cited by 3,270
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
A polymer tandem solar cell with 10.6% power conversion efficiency
You, J., Dou, L., Yoshimura, K., Kato, T., Ohya, K., Moriarty, T., Emery, K., Chen, C.-C., Gao, J., Li, G., et al. (2013) · Nature Communications · doi:10.1038/ncomms2411 · Cited by 2,778
Li, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics
Zhou, Y., Fuentes-Hernandez, C., Shim, J., Meyer, J., Giordano, A. J., Li, H., Winget, P., Papadopoulos, T., Cheun, H., Kim, J., et al. (2012) · Science · doi:10.1126/science.1218829 · Cited by 2,140
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Lee, K.-S., & El-Sayed, M. A. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp062536y · Cited by 2,095
Improved performance and stability in quantum dot solar cells through band alignment engineering
Chuang, C.-H. M., Brown, P. R., Bulović, V., & Bawendi, M. G. (2014) · Nature Materials · doi:10.1038/nmat3984 · Cited by 1,795
Single-junction polymer solar cells with high efficiency and photovoltage
He, Z., Xiao, B., Liu, F., Wu, H., Yang, Y., Xiao, S., Wang, C., Russell, T. P., & Cao, Y. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.6 · Cited by 1,675
Kim, J. Y., Kim, S. H., Lee, H. ‐., Lee, K., Ma, W., Gong, X., & Heeger, A. J. (2006) · Advanced Materials · doi:10.1002/adma.200501825 · Cited by 1,656
Sun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Dou, L., You, J., Yang, J., Chen, C.-C., He, Y., Murase, S., Moriarty, T., Emery, K., Li, G., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.356 · Cited by 1,416
Stability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Liao, S., Jhuo, H., Cheng, Y., & Chen, S. (2013) · Advanced Materials · doi:10.1002/adma.201301476 · Cited by 1,259
Yip, H.-L., & Jen, A. K.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02806a · Cited by 1,117
Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency
Chen, J., Cui, C., Li, Y., Zhou, L., Ou, Q., Li, C., Li, Y., & Tang, J. (2015) · Advanced Materials · doi:10.1002/adma.201404535 · Cited by 1,063
Interface Engineering for Organic Electronics
Ma, H., Yip, H., Huang, F., & Jen, A. K. ‐. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902236 · Cited by 950
High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells
Small, C. E., Chen, S., Subbiah, J., Amb, C. M., Tsang, S.-W., Lai, T.-H., Reynolds, J. R., & So, F. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.317 · Cited by 931
Zhang, Z.-G., Qi, B., Jin, Z., Chi, D., Qi, Z., Li, Y., & Wang, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00022f · Cited by 835
Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer
White, M. S., Olson, D. C., Shaheen, S. E., Kopidakis, N., & Ginley, D. S. (2006) · Applied Physics Letters · doi:10.1063/1.2359579 · Cited by 813
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
An Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
Chen, C., Chang, W., Yoshimura, K., Ohya, K., You, J., Gao, J., Hong, Z., & Yang, Y. (2014) · Advanced Materials · doi:10.1002/adma.201402072 · Cited by 785
Organic tandem solar cells: A review
Ameri, T., Dennler, G., Lungenschmied, C., & Brabec, C. J. (2009) · Energy & Environmental Science · doi:10.1039/b817952b · Cited by 763
Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells
Li, X., Choy, W. C. H., Huo, L., Xie, F., Sha, W. E. I., Ding, B., Guo, X., Li, Y., Hou, J., You, J., et al. (2012) · Advanced Materials · doi:10.1002/adma.201200120 · Cited by 699
Liang, Y., & Yu, L. (2010) · Accounts of Chemical Research · doi:10.1021/ar1000296 · Cited by 697
Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency
Liu, Y., Chen, C.-C., Hong, Z., Gao, J., Yang, Y., Zhou, H., Dou, L., Li, G., & Yang, Y. (2013) · Scientific Reports · doi:10.1038/srep03356 · Cited by 581
Applications of ZnO in organic and hybrid solar cells
Huang, J., Yin, Z., & Zheng, Q. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01873f · Cited by 578
Self-citation8.4% efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer
Cnops, K., Rand, B. P., Cheyns, D., Verreet, B., Empl, M. A., & Heremans, P. (2014) · Nature Communications · doi:10.1038/ncomms4406 · Cited by 569
Interface investigation and engineering – achieving high performance polymer photovoltaic devices
Chen, L.-M., Xu, Z., Hong, Z., & Yang, Y. (2010) · Journal of Materials Chemistry · doi:10.1039/b925382c · Cited by 565
Solution‐Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells
Manders, J. R., Tsang, S., Hartel, M. J., Lai, T., Chen, S., Amb, C. M., Reynolds, J. R., & So, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202269 · Cited by 541
Efficiency enhancement in organic solar cells with ferroelectric polymers
Yuan, Y., Reece, T. J., Sharma, P., Poddar, S., Ducharme, S., Gruverman, A., Yang, Y., & Huang, J. (2011) · Nature Materials · doi:10.1038/nmat2951 · Cited by 533
Dennler, G., Scharber, M. C., Ameri, T., Denk, P., Forberich, K., Waldauf, C., & Brabec, C. J. (2008) · Advanced Materials · doi:10.1002/adma.200702337 · Cited by 529
Single‐Junction Organic Solar Cells Based on a Novel Wide‐Bandgap Polymer with Efficiency of 9.7%
Huo, L., Liu, T., Sun, X., Cai, Y., Heeger, A. J., & Sun, Y. (2015) · Advanced Materials · doi:10.1002/adma.201500647 · Cited by 522
Efficient Tandem and Triple-Junction Polymer Solar Cells
Li, W., Furlan, A., Hendriks, K. H., Wienk, M. M., & Janssen, R. A. J. (2013) · Journal of the American Chemical Society · doi:10.1021/ja401434x · Cited by 507
Efficient Solution‐Processed Small‐Molecule Solar Cells with Inverted Structure
Kyaw, A. K. K., Wang, D. H., Gupta, V., Zhang, J., Chand, S., Bazan, G. C., & Heeger, A. J. (2013) · Advanced Materials · doi:10.1002/adma.201300295 · Cited by 502
Liao, S.-H., Jhuo, H.-J., Yeh, P.-N., Cheng, Y.-S., Li, Y.-L., Lee, Y.-H., Sharma, S., & Chen, S.-A. (2014) · Scientific Reports · doi:10.1038/srep06813 · Cited by 497
Highly efficient organic tandem solar cells: a follow up review
Ameri, T., Li, N., & Brabec, C. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40388b · Cited by 481
The role of buffer layers in polymer solar cells
Po, R., Carbonera, C., Bernardi, A., & Camaioni, N. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00273a · Cited by 480
Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte
Ouyang, X., Peng, R., Ai, L., Zhang, X., & Ge, Z. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.126 · Cited by 452
10.2% Power Conversion Efficiency Polymer Tandem Solar Cells Consisting of Two Identical Sub‐Cells
You, J., Chen, C., Hong, Z., Yoshimura, K., Ohya, K., Xu, R., Ye, S., Gao, J., Li, G., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201300964 · Cited by 439
Polymer Homo‐Tandem Solar Cells with Best Efficiency of 11.3%
Zhou, H., Zhang, Y., Mai, C., Collins, S. D., Bazan, G. C., Nguyen, T., & Heeger, A. J. (2015) · Advanced Materials · doi:10.1002/adma.201404220 · Cited by 431
Air‐Stable Polymer Electronic Devices
Lee, K., Kim, J. Y., Park, S. H., Kim, S. H., Cho, S., & Heeger, A. J. (2007) · Advanced Materials · doi:10.1002/adma.200602653 · Cited by 403
Barium: An Efficient Cathode Layer for Bulk-heterojunction Solar Cells
Gupta, V., Kyaw, A. K. K., Wang, D. H., Chand, S., Bazan, G. C., & Heeger, A. J. (2013) · Scientific Reports · doi:10.1038/srep01965 · Cited by 383
Yin, Z., & Zheng, Q. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100560 · Cited by 374
Self-citationMetal oxides for interface engineering in polymer solar cells
Chen, S., Manders, J. R., Tsang, S.-W., & So, F. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33838f · Cited by 370
Yusoff, A. R. B. M., Kim, D., Kim, H. P., Shneider, F. K., da Silva, W. J., & Jang, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03048f · Cited by 369
You, J., Chen, C., Dou, L., Murase, S., Duan, H., Hawks, S. A., Xu, T., Son, H. J., Yu, L., Li, G., et al. (2012) · Advanced Materials · doi:10.1002/adma.201201958 · Cited by 357
Liu, S., Zhang, K., Lu, J., Zhang, J., Yip, H.-L., Huang, F., & Cao, Y. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408363c · Cited by 349
Fulleropyrrolidine interlayers: Tailoring electrodes to raise organic solar cell efficiency
Page, Z. A., Liu, Y., Duzhko, V. V., Russell, T. P., & Emrick, T. S. (2014) · Science · doi:10.1126/science.1255826 · Cited by 332
Highly Efficient Tandem Polymer Photovoltaic Cells
Sista, S., Park, M., Hong, Z., Wu, Y., Hou, J., Kwan, W. L., Li, G., & Yang, Y. (2010) · Advanced Materials · doi:10.1002/adma.200901624 · Cited by 325
Tan, Z., Zhang, W., Zhang, Z., Qian, D., Huang, Y., Hou, J., & Li, Y. (2012) · Advanced Materials · doi:10.1002/adma.201104863 · Cited by 320
Liu, J., Xue, Y., Gao, Y., Yu, D., Durstock, M., & Dai, L. (2012) · Advanced Materials · doi:10.1002/adma.201104945 · Cited by 309
Li, K., Li, Z., Feng, K., Xu, X., Wang, L., & Peng, Q. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406220a · Cited by 293
Solution‐Processed Organic Tandem Solar Cells
Hadipour, A., de Boer, B., Wildeman, J., Kooistra, F. B., Hummelen, J. C., Turbiez, M. G. R., Wienk, M. M., Janssen, R. A. J., & Blom, P. W. M. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600138 · Cited by 284
Liu, C., Yi, C., Wang, K., Yang, Y., Bhatta, R. S., Tsige, M., Xiao, S., & Gong, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am509047g · Cited by 264
Self‐Organized Buffer Layers in Organic Solar Cells
Wei, Q., Nishizawa, T., Tajima, K., & Hashimoto, K. (2008) · Advanced Materials · doi:10.1002/adma.200792876 · Cited by 264
Photoconductive Cathode Interlayer for Highly Efficient Inverted Polymer Solar Cells
Nian, L., Zhang, W., Zhu, N., Liu, L., Xie, Z., Wu, H., Würthner, F., & Ma, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02168 · Cited by 263
Choi, H., Park, J. S., Jeong, E., Kim, G., Lee, B. R., Kim, S. O., Song, M. H., Woo, H. Y., & Kim, J. Y. (2011) · Advanced Materials · doi:10.1002/adma.201100266 · Cited by 260
He, Z., Wu, H., & Cao, Y. (2014) · Advanced Materials · doi:10.1002/adma.201303391 · Cited by 258
Gu, X., Cui, W., Li, H., Wu, Z., Zeng, Z., Lee, S., Zhang, H., & Sun, B. (2013) · Advanced Energy Materials · doi:10.1002/aenm201300549 · Cited by 251
Etxebarria, I., Ajuria, J., & Pacios, R. (2015) · Organic Electronics · doi:10.1016/j.orgel.2015.01.014 · Cited by 237
Optimizing Polymer Tandem Solar Cells
Gilot, J., Wienk, M. M., & Janssen, R. A. J. (2010) · Advanced Materials · doi:10.1002/adma.200902398 · Cited by 236
Inverted Polymer Solar Cells with Reduced Interface Recombination
Chen, S., Small, C. E., Amb, C. M., Subbiah, J., Lai, T., Tsang, S., Manders, J. R., Reynolds, J. R., & So, F. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200184 · Cited by 235
Li, C., Chang, C., Zang, Y., Ju, H., Chueh, C., Liang, P., Cho, N., Ginger, D. S., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201402276 · Cited by 220
Qin, P., Fang, G., Ke, W., Cheng, F., Zheng, Q., Wan, J., Lei, H., & Zhao, X. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta13579a · Cited by 208
Self-citationLiu, J., Durstock, M., & Dai, L. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42963f · Cited by 205
Vasilopoulou, M., Soultati, A., Georgiadou, D. G., Stergiopoulos, T., Palilis, L. C., Kennou, S., Stathopoulos, N. A., Davazoglou, D., & Argitis, P. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13975a · Cited by 197
Tan, Z., Li, S., Wang, F., Qian, D., Lin, J., Hou, J., & Li, Y. (2014) · Scientific Reports · doi:10.1038/srep04691 · Cited by 187
Properties of interlayer for organic photovoltaics
Lai, T.-H., Tsang, S.-W., Manders, J. R., Chen, S., & So, F. (2013) · Materials Today · doi:10.1016/j.mattod.2013.10.001 · Cited by 187
Chen, C.-C., Bae, S.-H., Chang, W.-H., Hong, Z., Li, G., Chen, Q., Zhou, H., & Yang, Y. (2015) · Materials Horizons · doi:10.1039/c4mh00237g · Cited by 186
Li, X., Xie, F., Zhang, S., Hou, J., & Choy, W. C. (2015) · Light: Science & Applications · doi:10.1038/lsa.2015.46 · Cited by 185
Enhanced spectral coverage in tandem organic solar cells
Dennler, G., Prall, H.-J., Koeppe, R., Egginger, M., Autengruber, R., & Sariciftci, N. S. (2006) · Applied Physics Letters · doi:10.1063/1.2336593 · Cited by 177
Sticky Interconnect for Solution-Processed Tandem Solar Cells
Tung, V. C., Kim, J., Cote, L. J., & Huang, J. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203464n · Cited by 177
Yu, W., Huang, L., Yang, D., Fu, P., Zhou, L., Zhang, J., & Li, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00930h · Cited by 176
A Metal‐Oxide Interconnection Layer for Polymer Tandem Solar Cells with an Inverted Architecture
Chou, C., Kwan, W. L., Hong, Z., Chen, L., & Yang, Y. (2010) · Advanced Materials · doi:10.1002/adma.201001033 · Cited by 174
Yaacobi‐Gross, N., Treat, N. D., Pattanasattayavong, P., Faber, H., Perumal, A. K., Stingelin, N., Bradley, D. D. C., Stavrinou, P. N., Heeney, M., & Anthopoulos, T. D. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401529 · Cited by 172
Shao, S., Zheng, K., Pullerits, T., & Zhang, F. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302408w · Cited by 170
Energy Level Tuning of Non-Fullerene Acceptors in Organic Solar Cells
Cnops, K., Zango, G., Genoe, J., Heremans, P., Martinez-Diaz, M. V., Torres, T., & Cheyns, D. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02808 · Cited by 167
Huang, J., Li, C., Chueh, C., Liu, S., Yu, J., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500406 · Cited by 162
Liu, J., Shao, S., Fang, G., Meng, B., Xie, Z., & Wang, L. (2012) · Advanced Materials · doi:10.1002/adma.201200238 · Cited by 161
Qu, S., Li, M., Xie, L., Huang, X. B., Yang, J., Wang, N., & Yang, S. (2013) · ACS Nano · doi:10.1021/nn4001963 · Cited by 153
Saracco, E., Bouthinon, B., Verilhac, J., Celle, C., Chevalier, N., Mariolle, D., Dhez, O., & Simonato, J. (2013) · Advanced Materials · doi:10.1002/adma.201302338 · Cited by 150
Sariçiftçi, N. S., Smilowitz, L. B., Heeger, A. J., & Wudl, F. (1993) · Synthetic Metals · doi:10.1016/0379-6779(93)91166-y · Cited by 140
Highly Efficient Tandem Polymer Solar Cells with a Photovoltaic Response in the Visible Light Range
Zheng, Z., Zhang, S., Zhang, M., Zhao, K., Ye, L., Chen, Y., Yang, B., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201404525 · Cited by 134
Efficient and stable polymer solar cells with solution-processed molybdenum oxide interfacial layer
Tan, Z., Qian, D., Zhang, W., Li, L., Ding, Y., Xu, Q., Wang, F., & Li, Y. (2012) · Journal of Materials Chemistry A · doi:10.1039/c2ta00325b · Cited by 132
Simplified Tandem Polymer Solar Cells with an Ideal Self‐Organized Recombination Layer
Kang, H., Kee, S., Yu, K., Lee, J., Kim, G., Kim, J., Kim, J.-R., Kong, J., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201404765 · Cited by 124
Stability of inverted organic solar cells with ZnO contact layers deposited from precursor solutions
MacLeod, B. A., de Villers, B. J. T., Schulz, P., Ndione, P. F., Kim, H., Giordano, A. J., Zhu, K., Marder, S. R., Graham, S. L., Berry, J. J., et al. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02488e · Cited by 122
Jo, J., Pouliot, J., Wynands, D., Collins, S. D., Kim, J. Y., Nguyen, T. L., Woo, H. Y., Sun, Y., Leclerc, M., & Heeger, A. J. (2013) · Advanced Materials · doi:10.1002/adma.201301288 · Cited by 121
Ecker, B., Egelhaaf, H., Steim, R., Parisi, J., & von Hauff, E. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp305206d · Cited by 121
Flexible silver grid/PEDOT:PSS hybrid electrodes for large area inverted polymer solar cells
Mao, L., Chen, Q., Li, Y., et al. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.09.007 · Cited by 118
Kozanoglu, D., Apaydın, D. H., Çırpan, A., & Esentürk, E. N. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.04.008 · Cited by 118
Yun, J.-M., Noh, Y., Lee, C., Na, S., Lee, S., Jo, S. M., Joh, H., & Kim, D. (2014) · Small · doi:10.1002/smll.201303648 · Cited by 116
Chang, C., Zuo, L., Yip, H., Li, Y., Li, C., Hsu, C., Cheng, Y., Chen, H., & Jen, A. K. ‐. (2013) · Advanced Functional Materials · doi:10.1002/adfm201301557 · Cited by 115
Gold nanoparticle-decorated graphene oxides for plasmonic-enhanced polymer photovoltaic devices
Chuang, M.-K., Lin, S.-W., Chen, F., Chu, C., & Hsu, C. (2013) · Nanoscale · doi:10.1039/c3nr05077g · Cited by 110
Highly efficient organic tandem solar cells using an improved connecting architecture
Janssen, A. G. F., Riedl, T., Hamwi, S., Johannes, H. ‐., & Kowalsky, W. (2007) · Applied Physics Letters · doi:10.1063/1.2772208 · Cited by 110
Efficient Inverted Tandem Polymer Solar Cells with a Solution‐Processed Recombination Layer
Kouijzer, S., Esiner, S., Frijters, C. H., Turbiez, M. G. R., Wienk, M. M., & Janssen, R. A. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100773 · Cited by 110
Low work function metal modified ITO as cathode for inverted polymer solar cells
Jiang, C., Sun, X. W., Zhao, D., Kyaw, A. K. K., & Li, Y. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.04.082 · Cited by 109
Tan, W., Wang, R., Li, M., Liu, G., Chen, P., Li, X., Lu, S., Zhu, H. L., Peng, Q., Zhu, X., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401685 · Cited by 106
Zuo, L., Chang, C., Chueh, C., Zhang, S., Li, H., Jen, A. K. ‐., & Chen, H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00633c · Cited by 105
Dkhil, S. B., Duché, D., Gaceur, M., Thakur, A. K., Aboura, F. B., Escoubas, L., Simon, J., Guerrero, A., Bisquert, J., García-Belmonte, G., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400805 · Cited by 105
Zhang, W., Wu, Y., Bao, Q., Gao, F., & Fang, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400359 · Cited by 105
Yoon, S. M., Lou, S. J., Loser, S., Smith, J. N., Chen, L. X., Facchetti, A. F., & Marks, T. J. (2012) · Nano Letters · doi:10.1021/nl303419n · Cited by 103
Yin, Z., Zheng, Q., Chen, S., Cai, D., Zhou, L., & Zhang, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301404 · Cited by 100
Self-citationRoll‐Coated Fabrication of Fullerene‐Free Organic Solar Cells with Improved Stability
Cheng, P., Bai, H., Zawacka, N. K., Andersen, T. R., Liu, W., Bundgaard, E., Jørgensen, M., Chen, H., Krebs, F. C., & Zhan, X. (2015) · Advanced Science · doi:10.1002/advs.201500096 · Cited by 95
Sun, W., Peng, H., Li, Y., Yan, W., Liu, Z., Bian, Z., & Huang, C. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp412784q · Cited by 94
Verreet, B., Cnops, K., Cheyns, D., Heremans, P. L., Stesmans, A. L., Zango, G., Claessens, C. G., Torres⊗, T., & Rand, B. P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301413 · Cited by 87
Guo, F., Li, N., Fecher, F. W., Gasparini, N., Quiroz, C. O. R., Bronnbauer, C., Hou, Y., Radmilović, V. V., Radmilovic, V. R., Spiecker, E., et al. (2015) · Nature Communications · doi:10.1038/ncomms8730 · Cited by 87
Zhao, Z., Wu, Q., Xia, F., Chen, X., Liu, Y., Zhang, W., Zhu, J., Dai, S., & Yang, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505387q · Cited by 87
High‐Performance Inverted Organic Photovoltaics with Over 1‐μm Thick Active Layers
Hu, X., Yi, C., Wang, M., et al. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400378 · Cited by 85
Ibrahem, M. A., Lan, T., Huang, J., Chen, Y., Wei, K., Li, L., & Chu, C. (2013) · RSC Advances · doi:10.1039/c3ra41744a · Cited by 84
Hösel, M., Angmo, D., Søndergaard, R. R., Benatto, G. A. D. R., Carlé, J. E., Jørgensen, M., & Krebs, F. C. (2014) · Advanced Science · doi:10.1002/advs.201400002 · Cited by 79
Min, J., Luponosov, Y. N., Zhang, Z., Ponomarenko, S. A., Ameri, T., Li, Y., & Brabec, C. J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400816 · Cited by 78
Wu, N., Luo, Q., Bao, Z., Lin, J., Li, Y., & Ma, C. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.05.039 · Cited by 73
Zhang, Z., Li, H., Qi, B., Chi, D., Jin, Z., Qi, Z., Hou, J., Li, Y., & Wang, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12478a · Cited by 72
Kadem, B. Y., Cranton, W. M., & Hassan, A. (2015) · Organic Electronics · doi:10.1016/j.orgel.2015.05.019 · Cited by 68
Yusoff, A. R. B. M., Kim, D., Schneider, F. K., da Silva, W. J., & Jang, J. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00749f · Cited by 68
High-Efficiency Inverted Polymer Solar Cells with Double Interlayer
Subbiah, J., Amb, C. M., Irfan, I., Gao, Y., Reynolds, J. R., & So, F. F. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201537p · Cited by 65
Li, N., Stubhan, T., Baran, D., Min, J., Wang, H., Ameri, T., & Brabec, C. J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200659 · Cited by 61
Stratakis, E. I., Stylianakis, M. Μ., Koudoumas, E., & Kymakis, E. (2013) · Nanoscale · doi:10.1039/c3nr00656e · Cited by 60
da Silva, W. J., Kim, H. P., Yusoff, A. R. B. M., et al. (2013) · Nanoscale · doi:10.1039/c3nr03011c · Cited by 59
Li, X., Xie, F., Zhang, S., Hou, J., & Choy, W. C. H. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401969 · Cited by 57
10.5% efficient polymer and amorphous silicon hybrid tandem photovoltaic cell
Kim, J., Hong, Z., Li, G., Song, T., Chey, J., Lee, Y. S., You, J., Chen, C., Sadana, D. K., & Yang, Y. (2015) · Nature Communications · doi:10.1038/ncomms7391 · Cited by 57
Cheun, H., Fuentes‐Hernandez, C., Shim, J., Fang, Y., Cai, Y., Li, H., Sigdel, A. K., Meyer, J., Maibach, J., Dindar, A., et al. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102968 · Cited by 55
Simple O2Plasma-Processed V2O5as an Anode Buffer Layer for High-Performance Polymer Solar Cells
Bao, X., Zhu, Q., Wang, T., Guo, J. K., Yang, C., Yu, D., Wang, N., Chen, W., & Yang, R. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00091 · Cited by 49
Cho, N., Li, C., Yip, H., & Jen, A. K. ‐. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42509f · Cited by 49
Ye, H., Hu, X., Jiang, Z., Chen, D., Liu, X., Nie, H., Su, S., Gong, X., & Cao, Y. H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta01226c · Cited by 44
Chao, Y.-H., Wu, J., Wu, C., Jheng, J., Wang, C., & Hsu, C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300430 · Cited by 38
Jin, S., Jun, G. H., Hong, S. H., & Jeon, S. (2012) · Carbon · doi:10.1016/j.carbon.2012.05.027 · Cited by 38
Sun, C., Wu, Y., Zhang, W., Jiang, N.-Q., Jiu, T., & Fang, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404423k · Cited by 36
An Alternative Hole Transport Layer for Both ITO‐ and Graphene‐Based Organic Solar Cells
Park, H., & Kong, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301280 · Cited by 30
Alonzo, J., Kochemba, W. M., Pickel, D. L., Ramanathan, M., Sun, Z., Li, D., Chen, J., Sumpter, B. G., Heller, W. T., & Kilbey, S. M. (2013) · Nanoscale · doi:10.1039/c3nr02226a · Cited by 26
Shim, J. W., Fuentes‐Hernandez, C., Zhou, Y., Dindar, A., Khan, T. M., Giordano, A. J., Cheun, H., Yun, M., Marder, S. R., & Kippelen, B. J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400048 · Cited by 24
Sharma, G. D., Keshtov, M. L., Khokhlov, A. R., Tasis, D. A., & Galiotis, C. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.11.027 · Cited by 23
Yoon, Y., Kim, H. J., Cho, C., Kim, S.-K., Son, H. J., Ko, M. J., Kim, H., Lee, D., Kim, J. Y., Lee, W., et al. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404381e · Cited by 18
Cui, W., Wu, Z., Liu, C., Wu, M., Ma, T., Wang, S., Lee, S., & Sun, B. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13473c · Cited by 10
Cited by
Progress in Stability of Organic Solar Cells
Duan, L., & Uddin, A. (2020) · Advanced Science · doi:10.1002/advs.201903259 · Cited by 534
Cao, J., Wu, B., Chen, R., Wu, Y., Hui, Y., Mao, B., & Zheng, N. (2018) · Advanced Materials · doi:10.1002/adma.201705596 · Cited by 447
Interfacial Dipole in Organic and Perovskite Solar Cells
Chen, Q., Wang, C., Li, Y., & Chen, L. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c07439 · Cited by 397
Cao, B., Adutwum, L. A., Oliynyk, A. O., Luber, E. J., Olsen, B. C., Mar, A., & Buriak, J. M. (2018) · ACS Nano · doi:10.1021/acsnano.8b04726 · Cited by 316
Interlayers for non-fullerene based polymer solar cells: distinctive features and challenges
Sorrentino, R., Kozma, E., Luzzati, S., & Po, R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02503h · Cited by 265
Metadata
- Authors
- Yin, Z., Wei, J., & Zheng, Q.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2016-02-18
- Volume
- 3
- Issue
- 8
- Pages
- 1500362-1500362
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2281370366
- Cited by
- 481
- References
- 146
- FWCI
- 28.97
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.