Biodegradable magnesium-based implants in orthopedics-a general review and perspectives
Open accessThe DOI matches its Crossref record; 136 of the 137 references it cites were found in a registry or an index.
Abstract
Biodegradable Mg‐based metals may be promising orthopedic implants for treating challenging bone diseases, attributed to their desirable mechanical and osteopromotive properties. This Review summarizes the current status and future research trends for Mg‐based orthopedic implants. First, the properties between Mg‐based implants and traditional orthopedic implants are compared on the following aspects: in vitro and in vivo degradation mechanisms of Mg‐based implants, peri‐implant bone responses, the fate of the degradation products, and the cellular and molecular mechanisms underlying the beneficial effects of Mg ions on osteogenesis. Then, the preclinical studies conducted at the low weight bearing sites of animals are introduced. The innovative strategies (for example, via designing Mg‐containing hybrid systems) are discussed to address the limitations of Mg‐based metals prior to their clinical applications at weight‐bearing sites. Finally, the available clinical studies are summarized and the challenges and perspectives of Mg‐based orthopedic implants are discussed. Taken together, the progress made on the development of Mg‐based implants in basic, translational, and clinical research has laid down a foundation for developing a new era in the treatment of challenging and prevalent bone diseases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures











Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Biodegradable Mg alloys have emerged as potent alternatives for treating IBDs [5,6], offering bone-matched mechanical properties, osteoimmunomodulation via Mg2+/H2 release, and inherent antibacterial effects from degradation products or alloying elements (e.g., Zn, Ag, Cu) [[5], [6], [7], [8]].”
From Nanocatalytic magnesium osteoimplants with biodegradable self-adaptive interfaces for therapeutic repair of infected bone defects (2026) · cites this paper as [5]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, rapid corrosion of unmodified Mg can cause premature failure, excessive ion/gas accumulation, and inflammation [5,9].”
From Nanocatalytic magnesium osteoimplants with biodegradable self-adaptive interfaces for therapeutic repair of infected bone defects (2026) · cites this paper as [5]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED ARTICLE: In vitro and in vivo responses of macrophages to magnesium-doped titanium
Li, B., Cao, H., Zhao, Y., Cheng, M., Qin, H., Cheng, T., Hu, Y., Zhang, X., & Liu, X. (2017) · Scientific Reports · doi:10.1038/srep42707 · Cited by 76
RetractedEpidemiology and outcomes of osteoporotic fractures
Cummings, S. R., & Melton, L. J. (2002) · The Lancet · doi:10.1016/s0140-6736(02)08657-9 · Cited by 3,821
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Coupling of angiogenesis and osteogenesis by a specific vessel subtype in bone
Kusumbe, A. P., Ramasamy, S. K., & Adams, R. H. (2014) · Nature · doi:10.1038/nature13145 · Cited by 2,155
Shane, E., Burr, D., Abrahamsen, B., Adler, R. A., Brown, T. D., Cheung, A. M., Cosman, F., Curtis, J. R., Dell, R., Dempster, D. W., et al. (2014) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.1998 · Cited by 2,147
Osteoimmunology: shared mechanisms and crosstalk between the immune and bone systems
Takayanagi, H. (2007) · Nature Reviews Immunology · doi:10.1038/nri2062 · Cited by 1,878
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Research works printed but not linked: 9
- Haseeb M., 2017, Int. J. Health Sci., 11, 1
- 10.1016/j.actbio.2017.09.018 · DOI
- Chen X. D., 2017, J. Orthop. Transl., 10, 1
- 10.1016/j.biomaterials.2017.12.007 · DOI
- 10.1016/j.biomaterials.2015.12.005 · DOI · Paper page
- Windolf M., 2014, Proc. of the Int. Conf. on Biomedical Electronics and Devices, 243
- 10.1038/s41586-018-0650-9 · DOI · Paper page
- 10.1016/j.biomaterials.2016.10.017 · DOI · Paper page
- Cao Y., 2014, Angiogenic Factors, Cancer Therapy. Atlas Genet Cytogenet Oncol Haematol., 18, 447
Cited by
Items 301–400 of 646
Liu, Y., Yu, L. D., Chen, J., Li, S., Wei, Z., & Guo, W. (2024) · Biomedicines · doi:10.3390/biomedicines12020344 · Cited by 13
“As the fourth most common mineral in the human body, magnesium is involved in hundreds of biochemical reactions and is an important element in the development of bones and soft tissues [10].”
BackgroundChen, K., Wong, P., Rethi, L., Wang, W.-R., Chen, C., Tsai, P.-H., Jang, J. S. C., Lin, C.-L., Chen, C.-H., & Chuang, A. E.-Y. (2025) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2024.10.001 · Cited by 13
Zhang, H., Wei, Q., Ji, R., Xie, E., Sun, A., Xiao, B., Huang, C., Ma, S., Wei, J., Yang, X., et al. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00017f · Cited by 12
Guo, L., Wang, X., Lu, L., Cao, H., Dai, Y., Tang, K., Zhao, N., Qi, F., & Ouyang, X. (2024) · Applied Surface Science · doi:10.1016/j.apsusc.2024.161842 · Cited by 12
Zheng, W., Tian, S., Huo, J., Zhang, Q., Wang, D., Liu, Z., Zhao, B., Gao, Y., Zhang, Z., & Wang, Q. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.10.038 · Cited by 12
“In contrast, the Mg-Ti-1500 group experienced a rapid increase above 10 mM within the first 7 days, maintaining a high plateau, suggesting excessive degradation in the high-porosity structure, which could lead to potential cytotoxicity [24,38].”
Biodegradable magnesium implants: From material development to clinical translation
Mukarati, T. W., Ngwangwa, H., Mbohwa, C., Msomi, V., Sumbwanyambe, M., & Pandelani, T. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.101905 · Cited by 12
Zhu, Y., Guo, J., Sheng, Y., Xu, J., Qin, L., & Ngai, T. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.02.109 · Cited by 12
Self-citationEffect of Ca Micro-Alloying on the Microstructure and Anti-Corrosion Property of Mg0.5Zn0.2Ge Alloy
Cheng, B., Li, D., Xing, B., Hou, R., Jiang, P., Zhu, S., & Guan, S. (2024) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-024-01703-2 · Cited by 12
Liu, M., Huang, F., Hung, C., Wang, L., Bi, W., Liu, Y., & Li, W. (2022) · Nano Research · doi:10.1007/s12274-021-4055-y · Cited by 12
A SiO2 layer on PEO-treated Mg for enhanced corrosion resistance and bone regeneration
Qiu, L., Zhang, C., Yang, X., Peng, F., Huang, Y., & He, Y. H. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1053944 · Cited by 12
He, N., Li, J., Li, W., Lin, X., Fu, Q., Peng, X. F., Jin, W., Yu, Z., & Chu, P. K.-H. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.130947 · Cited by 12
Corrosion and Tribological Performance of Diamond-like Carbon-Coated ZK 60 Magnesium Alloy
Claver, A., Fernández-Martínez, I., Santiago, J. A., Díaz‐Rodríguez, P., Panizo-Laiz, M., Esparza, J., Palacio, J. F., Fuentes, G. G., Zalakain, I., & García, J. A. (2023) · Coatings · doi:10.3390/coatings13111871 · Cited by 11
Gong, C., Yang, J. Z., Zhang, X., Wei, Z., Wang, X., Huang, X., Yu, L. D., & Guo, W. (2023) · Biomedicines · doi:10.3390/biomedicines12010074 · Cited by 11
“For Mg 2+ , concentrations between 2–10 mM appear to represent an optimal range for exerting physiological effects [33,34].”
BackgroundHerzog, P., Rendenbach, C., Turostowski, M., Ellinghaus, A., Soares, A. P., Heiland, M., Duda, G. N., Schmidt‐Bleek, K., & Fischer, H. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.07.005 · Cited by 11
Progress in bone repair scaffolds: Interdisciplinary perspective for mechanism and material design
Yang, C., Fang, H., Dou, Q., Xu, J., Qiu, J. M., Yao, H., & Shao, S. (2025) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2025.217355 · Cited by 11
Self-citationDual‐Strategy Design of Heterojunction‐Enhanced Piezoelectric Hydrogels for Periodontitis Treatment
Zhou, Q., Fang, S., Li, C., Zhou, M., Sui, X., Hu, C., Xu, H., Yang, S., Lu, B., Zhang, R., et al. (2026) · Advanced Science · doi:10.1002/advs.202600017 · Cited by 11
Xie, Y., Xiong, H., Zheng, Z. Q., Zhang, L., & Chen, Y. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01488 · Cited by 11
Aggarwal, D., Kumar, V., & Sharma, S. (2023) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35228 · Cited by 11
Jia, M. S., Hash, S., Reynoso, W., Elsaadany, M., & Ibrahim, H. (2023) · Bioengineering · doi:10.3390/bioengineering10070757 · Cited by 11
“Polymer-based biodegradable materials such as the resorbable materials poly(L- or D,Llactic acid), poly(glycolic acid), and polycaprolactones (PCL) have also been of interest for orthopedic applications and have been FDA-approved as implant materials [23,24].”
BackgroundGu, L., Huang, R., Ni, N., Zhou, R., Su, Y., Gu, P., Zhang, D., & Fan, X. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c02795 · Cited by 11
Yang, J., Sun, B., Dai, J., Li, X., Zhao, Y., Zhang, L., Bai, J., Xue, F., & Chu, C. (2024) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2024.108577 · Cited by 11
Kasprzhitskii, A., & Лазоренко, Г. И. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.135267 · Cited by 11
Yavuzyegit, B., Karali, K., Avcu, E., Demori, A., Quizon, D., Hacıosmanoğlu, M., Hekimoğlu, A. P., Smith, N., Usov, S., Shashkov, P., et al. (2025) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2025.132151 · Cited by 11
Analysis of Degradation Products of Biodegradable ZnMgY Alloy
Panaghie, C., Zegan, G., Sodor, A. C., Cimpoeşu, N., Lohan, N. M., Istrate, B., Roman, A.-M., & Ioanid, N. (2023) · Materials · doi:10.3390/ma16083092 · Cited by 11
“It has been observed that Mg ions released from biodegradable Mg-based implants have a positive impact on bone regeneration [9].”
BackgroundIn vitro corrosion and cytocompatibility of Mg-Zn-Ca alloys coated with FHA
Lan, W., Li, J., Lv, Z., Liu, S., Liang, Z., Huang, D., Wei, X., & Chen, W. (2024) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2024.113880 · Cited by 10
Krishnan, A. V., Sukanya, N. M., Rahman, T., & Gepreel, M. A. H. (2024) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-024-06842-7 · Cited by 10
3D printed biomaterials: From fabrication techniques to clinical applications: A systematic review
Kaur, A., Singh, S., Bala, N., & Kansal, S. K. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113606 · Cited by 10
Zhang, Y., Yu, J., Wu, C., Jiang, X., Han, L., Yang, J., Zhang, S., Han, J., Tai, Y., Sun, Y., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.145229 · Cited by 10
Advances in Drug Delivery Systems for Osteochondral Tissue Regeneration
Shang, J., Zhang, J., Liu, L., Kou, W., Zhang, P., Sun, G., Zhou, H., Shi, W., Zhang, Y., Liu, C., et al. (2025) · BIO Integration · doi:10.15212/bioi-2025-0072 · Cited by 10
Liu, J., Zhu, J., Goto, T., Yang, S., Kang, H., Wang, X., & Dai, H. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.08.022 · Cited by 10
“Magnesium-based materials have emerged as a research hotspot in recent years owing to magnesium ’ s promotional effects on vascular, neural, and bone regeneration [2,3].”
Erçetin, A., Der, O., Patel, M., Linul, E., & Aslantaş, K. (2026) · Progress in Engineering Science · doi:10.1016/j.pes.2026.100271 · Cited by 10
Xiang, H., Dai, X., Xu, W., Li, S., Yang, X., Huang, Z., Li, R., Yang, C., Chang, H., Chen, Y., et al. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111220 · Cited by 10
An In Vivo Rat Study of Bioresorbable Mg-2Zn-2Ga Alloy Implants
Drobyshev, A. Y., Gurganchova, Z., Redko, N., Komissarov, A. A., Bazhenov, V. E., Statnik, E. S., Sadykova, I. A., Свиридов, Е. Г., Salimon, A. I., Korsunsky, A. M., et al. (2023) · Bioengineering · doi:10.3390/bioengineering10020273 · Cited by 10
“Hydrogen production is often accompanied by inflammatory reactions and the formation of cavities encapsulated by fibrous tissue [33].”
BackgroundReimers, J., Trinh, H. C., Wiese, B., Meyer, S., Brehling, J., Flenner, S., Hagemann, J., Kruth, M., Kibkalo, L., Ćwieka, H., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c04054 · Cited by 10
Hu, P., Zhu, L., Liu, J., Lv, Y., Cai, G., & Zhang, X. (2024) · Coatings · doi:10.3390/coatings14040376 · Cited by 10
Duan, G., Chang, D., Zhang, C., Li, S., Liu, X., Wang, Z., Chen, L., Li, J., Bai, Z., & Weng, J. (2024) · Biosurface and Biotribology · doi:10.1049/bsb2.12081 · Cited by 10
Titanium vs PEO Surface-Modified Magnesium Plate Fixation in a Mandible Bone Healing Model in Sheep
Turostowski, M., Rendenbach, C., Herzog, P., Ellinghaus, A., Soares, A. P., Heiland, M., Duda, G. N., Schmidt‐Bleek, K., & Fischer, H. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00602 · Cited by 10
Mechanical study reinforced magnesium-yttrium alloys by eggshell powder using resistance casting
Huang, S., Li, C., Sarkar, M., Li, W., Kannaiyan, S., Bilgili, H. K., Al-Mallahi, D. A. F., & Todoh, M. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.176458 · Cited by 10
Taghipour, S., Vakili‐Tahami, F., & Chakherlou, T. N. (2024) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/ad90e7 · Cited by 10
Hashemi, T. S., Jaiswal, S., Çelikin, M., McCarthy, H. O., Levingstone, T. J., & Dunne, N. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2024.131556 · Cited by 10
Pradeep Raja, C., Babu, K., Balaji, N. S., Saikiran, A., & Rajesh Kannan, A. (2025) · Biomedical Engineering Advances · doi:10.1016/j.bea.2025.100161 · Cited by 10
The Effect of Zinc and Calcium Addition on Magnesium Alloy
Školáková, A., Lovaši, T., Pinc, J., Kačenka, Z., Rieszová, L., & Žofková, Z. (2020) · MANUFACTURING TECHNOLOGY · doi:10.21062/mft.2020.107 · Cited by 10
Xie, L., Zhang, Y., Cao, B., Jiao, X., Yue, X., Xu, Y., Yang, X., Yang, G., Wang, Y., Shen, J., et al. (2024) · Regenerative Biomaterials · doi:10.1093/rb/rbae100 · Cited by 9
Tong, X., Shen, X., Lin, Z., Zhou, R., Han, Y., Zhu, L., Huang, S., Ma, J., Li, Y., Wen, C., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.09.026 · Cited by 9
“Clinically, bone-fixation systems such as bone nails, bone anchors, and bone plates are commonly used as medical devices and implants in fracture-fixation and ligament-injury surgery [1].”
Particles generated from degrading magnesium implants induce bone resorption
Sun, Y., Yuan, K., Lou, J., Yu, J., Yu, H., 彭兆祥, Dong, X., Hou, P., Zan, R., Peng, H., et al. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112241 · Cited by 9
Răducanu, D., Cojocaru, V. D., Nocivin, A., Drob, S. I., Hendea, R. E., Stanciu, D., Ivanescu, S., Raducanu, V. A., Şerban, N., Cojocaru, E. M., et al. (2024) · Materials · doi:10.3390/ma17071682 · Cited by 9
“The main disadvantage is the risk of more the rapid degradation of magnesium alloy prior to the bone healing process, a fact that requires a difficult co-ordination between the two processes: degradation versus healing [15,16].”
BackgroundYang, Y., Ren, J., Chen, C., Shao, Y., Shuai, X., Wu, X., Pan, C., & Shuai, C. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.09.015 · Cited by 9
Failure analysis and design improvement of retrieved plates from revision surgery
Zhang, N.-Z., Shui, Y.-Y., Zhang, Q., Zhang, Y.-T., Su, J., Qin, L., & Cheng, C. (2024) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2024.08.011 · Cited by 9
“Results: The results indicated that the retrieved plates mainly failed due to fatigue fracture induced by delayed union or nonunion (44/49), and using pure titanium plates in weight-bearing areas increased the risk of fracture compared with Ti alloy plates when the delayed union or nonunion…”
BackgroundResultSelf-citationLiu, S., Gao, M. H., Liu, N., Li, R., Zhang, Z., Yao, Y., Wang, W., Tan, L., & Zhang, N. (2024) · ACS Omega · doi:10.1021/acsomega.4c07635 · Cited by 9
Emun, Y., Robinson, T., Jordon, J. B., Allison, P., & Kubacki, G. W. (2024) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-024-07662-8 · Cited by 9
Magnesium-assisted hydrogen improves isoproterenol-induced heart failure
Chen, F., Chen, R., Yang, L., Shen, B., Wang, Y., Gao, Y., Tan, R., & Zhao, X. (2025) · Medical Gas Research · doi:10.4103/mgr.medgasres-d-24-00135 · Cited by 9
Li, M., Wei, T., Liu, H., Wu, Z., Zhou, J., Jiang, J., He, P., Zhang, Y., & Zheng, Y. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202507822 · Cited by 9
Zhang, Q., Zhang, L., Yang, M., Hong, Q., Yang, Z., Liu, S., Xiong, Q., & Pan, C. (2021) · Nanotechnology Reviews · doi:10.1515/ntrev-2021-0063 · Cited by 9
“that they lose the mechanical integrity before the tissue has sufficiently healed [1].”
BackgroundInfluentialWu, H. W., Yu, M., Zhang, S., You, M., Xiong, A., Feng, B., Niu, J., Yuan, G., Yue, B., & Jia, P. (2024) · Journal of Materials Chemistry B · doi:10.1039/d3tb02744a · Cited by 9
In situ spatiotemporal solute imaging of metal corrosion on the example of magnesium
Wagner, S., Hummel, C., Santner, J., Puschenreiter, M., Irrgeher, J., Wenzel, W. W., Borisov, S. M., & PROHASKA, T. R. (2022) · Analytica Chimica Acta · doi:10.1016/j.aca.2022.339910 · Cited by 9
Daniel, Leonardo, M., Nursatya, S. M., Barlian, A., Prajatelistia, E., & Judawisastra, H. (2023) · Materials Advances · doi:10.1039/d2ma00890d · Cited by 8
Cheng, S., Zhao, J., Gao, W., Zou, Z., Dai, Z., Geng, Y., Wu, Y., Shi, J., Zhu, P., Li, B., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202503425 · Cited by 8
Chen, D., Xin, J., Yin, M., Xu, M., Chen, J., Dong, Q., Shao, Y. C., Wang, C., Chu, C., Xue, F., et al. (2025) · Smart Materials in Manufacturing · doi:10.1016/j.smmf.2025.100101 · Cited by 8
Bagheri, A., Sedighi, M., & Shamsi, M. (2023) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-023-08134-8 · Cited by 8
“However, magnesium alloys are subject to rapid degradation when exposed to the physiological environment of the body, resulting in the loss of mechanical integrity prior to tissue healing [15, 18, 21].”
Bio-properties of Mg-RE alloys: an applied study on cytotoxicity and genotoxicity
Djebari, K., Türen, Y., Elen, L., Ahlatçı, H., Bozer, B. M., & Çiçek, B. (2024) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2024.2397190 · Cited by 8
Chen, P., Hu, Y., Liu, S., Wang, H., Liu, N., & Liang, C. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-10263-w · Cited by 8
Gan, J., Li, Z., Xiong, J., Zhang, C., Chen, Z., Zhong, T., & Shi, H. (2024) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2024.116856 · Cited by 8
Jm, C. H., Narayanan, P., Pramanik, R., & Arockiarajan, A. (2025) · Biomedical Materials · doi:10.1088/1748-605x/ada840 · Cited by 8
“PLA’s degradation into lactic acid, a naturally occurring compound in the body, reduces the risk of inflammation and foreign body reactions [186].”
Saeed, M. A., Junejo, F., Amin, I. U., Tanoli, I. K., Algarni, A. D., Ahmad, S., & Ateya, A. A. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104451 · Cited by 8
Khrustalyov, A. P., Akhmadieva, A. A., Monogenov, A. N., Zhukov, I., Marchenko, E. S., & Vorozhtsov, A. (2022) · Metals · doi:10.3390/met12020206 · Cited by 8
Anderson, T., Lee, J., Johnston, P., Torreggiani, W. C., & Ryan, M. (2022) · Irish Journal of Medical Science (1971 -) · doi:10.1007/s11845-022-03071-1 · Cited by 8
“For this reason, recent interest has been generated around the use of biodegradable magnesium alloys as a substitute for conventional metallic devices [2, 8].”
BackgroundSu, T.-Y., Tang, H.-Y., Jang, J. S. C., Chen, C., & Chen, H.-H. (2021) · Applied Sciences · doi:10.3390/app11209602 · Cited by 8
Wu, Y., Cai, Z., Zhang, Y., Zheng, Y., Liao, L., & Jia, Z. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.12.018 · Cited by 7
“…review under the responsibility of editorial board of Bioactive Materials. treating IBDs [5,6], offering bone-matched mechanical properties, osteoimmunomodulation via Mg 2 + /H 2 release, and inherent antibacterial effects from degradation products or alloying elements (e.g., Zn, Ag, Cu) [5 – 8].”
Çiçek, B., & Sun, Y. (2025) · Nature Cell and Science · doi:10.61474/ncs.2025.00002 · Cited by 7
Yasakau, K. A., Vaghefinazari, B., Scharnagl, N., Lamaka, S. V., & Zheludkevich, M. L. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.113360 · Cited by 7
Qu, X., Yin, M., Sun, Z., Liu, Z., Ru, J., Liu, H., Xu, R., Musskaya, O. N., Glazov, I. E., Lu, B., et al. (2025) · Regenerative Biomaterials · doi:10.1093/rb/rbaf133 · Cited by 7
Cui, Z., Zhou, L., Hao, X., Luo, M., Wang, W., Wang, J., & Li, W. (2023) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-023-01548-1 · Cited by 7
Self-citationNIR-induced corrosion regulation strategy for biodegradable Mg-based implants
Lv, Y., Zhang, Y., Zheng, M., Liu, H., Dong, Z., & Zhang, X. (2023) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2023.107921 · Cited by 7
Shuai, C., Chen, C., Zhao, Z., & Yang, Y. (2024) · Micromachines · doi:10.3390/mi15091156 · Cited by 7
Chen, J., Guan, Y., Yang, Y., Ma, T., Feng, J., Guo, W., Wang, Q., Zhang, Y., & Liao, J. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.10.191 · Cited by 7
Kennedy, S. M., Sekar, M., & Amudhan, K. (2025) · International Journal of Computational Methods · doi:10.1142/s021987622550029x · Cited by 7
Hernández, M. A., Fajardo, S., Torres, B., Rams, J., & Hidalgo-Manrique, P. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114355 · Cited by 7
Bellavia, D., Paduano, F., Brogini, S., Ruggiero, R., Marano, R. M., Cusanno, A., Guglielmi, P., Piccininni, A., Pavarini, M., D’Agostino, A., et al. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb01282a · Cited by 7
Long, Q., Meng, N., Chen, F., Zhang, L., Tao, X., Liu, L., Xu, G., & Cui, Y. (2023) · Calphad · doi:10.1016/j.calphad.2023.102583 · Cited by 7
Rabeeh, V. M., Surendramohan, K. S., Jyothis, S., Rahim, S. A., Babu, C. S., Sijina, K. P., Rajanikant, G. K., Joseph, M., & Hanas, T. (2024) · Discover Materials · doi:10.1007/s43939-024-00113-6 · Cited by 7
Cui, Y., Ding, K., Lv, H., Cheng, X., Fan, Z., Sun, D., Zhang, Y., Chen, W., & Zhang, Y. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1448527 · Cited by 7
The Comparability of In Vitro and In Vivo Experiments for Degradable Mg Implants
Willumeit‐Römer, R., Bruns, S., Helmholz, H., Krüger, D., Wiese, B., Galli, S., Moosmann, J. P., & Zeller‐Plumhoff, B. (2022) · The minerals, metals & materials series · doi:10.1007/978-3-030-92533-8_3 · Cited by 7
Mathew, A., Hassan, H. W., Korostynska, O., Westad, F., Mota‐Silva, E., Menichetti, L., & Mirtaheri, P. (2023) · Sensors · doi:10.3390/s23063063 · Cited by 7
“Alloying helps to reduce the fast degradation rate of pure magnesium implants, giving sufficient mechanical strength to the bone until it heals completely [5,13].”
BackgroundInfluentialEffect of unsoluble corrosion products of WE43 alloys in vitro on macrophages
Dong, L., Shen, Z., Zhang, H., Zhang, B., Zhou, Y., Lv, X., Hong, X., Liu, J., & Yang, W. P. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37601 · Cited by 7
Zheng, B., Ou, J., Li, H., Zhou, Z., Qin, A., Zhang, K., & Wang, X. (2022) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00434-9 · Cited by 7
Topology optimization of degradable composite structures with time‐changeable stiffness
Zhang, H., Takezawa, A., Ding, X., Xu, S., Li, H., & Guo, H. (2021) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.6745 · Cited by 7
Daavari, M., Atapour, M., Mohedano, M., Matykina, E., Arrabal, R., & Nešić, D. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14090475 · Cited by 6
Saeed, M. A., Junejo, F., & Amin, I. (2024) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2024.2334543 · Cited by 7
Dobkowska, A., Lofaj, F., García, M. A. G., Martinez, D. C., Kulikowski, K., Paradiso, A., Idaszek, J., Gubicza, J., Jenei, P., Kabátová, M., et al. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2024.131267 · Cited by 6
Peñuela-Cruz, C. E., Peña, J. Á., Márquez‐Herrera, A., Mis-Fernández, R., Caballero‐Briones, F., González-Moreno, F. I., Palmerín, J. M., & Hernández-Rodríguez, E. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.09.188 · Cited by 6
Quinn, C., van Gaalen, K., McHugh, P. E., Kopp, A., & Vaughan, T. J. (2024) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2024.109444 · Cited by 6
Haneef, M., Evaristo, M., Yang, L., Morina, A., & Trindade, B. (2025) · Wear · doi:10.1016/j.wear.2025.206067 · Cited by 6
Alloy Selection and Manufacturing Technologies for Total Ankle Arthroplasty: A Narrative Review
Mitra, K., Movva, A. K., Sohn, M. O., Tennyson, J. M., Talaski, G. M., Adams, S. B., & Anastasio, A. T. (2025) · Materials · doi:10.3390/ma18163770 · Cited by 6
“While a hybrid de-sign could address some limitations associated with pure magnesium-based implants [84], challenges remain with magnesium’s decreased mechanical strength relative to traditional materials, raising concerns regarding their utility in weight-bearing implants [85].”
Ma, D., Sun, Z., Zhao, Q., Zhang, Y., Li, W., Wang, J., Chen, Y., Zhao, M., Wang, J., Huang, J., et al. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.08.019 · Cited by 6
Self-citationBiodegradable LiZn4 intermetallic alloy for orthopedic applications
Xia, P.-Z., Zhou, C. Y., Shi, Z., Sun, J.-L., Li, Z.-L., Yao, S., Zhang, H., Gu, X., & Wang, L. (2025) · Corrosion Science · doi:10.1016/j.corsci.2025.113370 · Cited by 6
Huo, J., Liu, Y., Liu, Z., Wang, N., Zhao, B., Li, J., Tan, L., Zheng, Y., Zhang, Z., Ritchie, R. O., et al. (2025) · Advanced Materials · doi:10.1002/adma.202514145 · Cited by 6
“…appropriate mechanical properties – such as sufficient mechanical strength and an elastic modulus compatible with natural bone to mitigate stress-shielding [6]–while also providing biological functions, including excellent biocompatibility, antimicrobial activity [2], and osteoinductivity [5].”
Menaquinone-containing PDA-PEO coatings reduce corrosion of magnesium implants
Nadaraia, M. A., Mashtalyar, D. V., Golysheva, A. A., Belov, E. A., Imshinetskiy, I. M., Trukhin, I. S., Belaya, A. A., Kozlov, A. G., Mashurova, M. V., Shandurskiy, V. A., et al. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.108613 · Cited by 6
Lau, D. S. A., Chieng, H. E., Wang, C., Li, Z., Zhang, X., Chow, D. H. K., Qin, L., & Lu, W. W. (2023) · Materialia · doi:10.1016/j.mtla.2023.101743 · Cited by 6
Self-citationMakka, B., Alaoui, S. M. A. E., Chakib, K., Guendouzi, M. E., & Benbiyi, A. (2024) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2024.114152 · Cited by 6
Liu, K., Meng, S., Zhang, Y., Zhou, P., Zhang, T., & Wang, F. (2024) · Anti-Corrosion Methods and Materials · doi:10.1108/acmm-06-2024-3037 · Cited by 6
Metadata
- Authors
- Wang, J., Xu, J., Hopkins, C., Chow, D. H., & Qin, L.
- Affiliations
- School of Biomedical Engineering Sun Yat‐sen University Guangzhou 510006 P. R. China
- Chinese University of Hong Kong (HK)
- Corresponding author
- Qin, Ling
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2020-02-28
- Volume
- 7
- Issue
- 8
- Pages
- 1902443-1902443
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC7175270
- OpenAlex
- W3007391939
- Semantic Scholar
- 0a59975a949f6f5208b92e0101abde435a9657c9
- Cited by
- 574
- References
- 137
- Citations by year
- 2026: 58 · 2025: 111 · 2024: 113 · 2023: 110 · 2022: 99 · 2021: 66 · 2020: 15
- FWCI
- 4.85
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (81702165, 81802152)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Materials Chemistry › Titanium Alloys Microstructure and Properties
- Keywords
- biodegradable magnesium implants, orthopedic implants, degradation products, bone disease, clinical translation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.