Biodegradable magnesium-based implants in orthopedics-a general review and perspectives
Open accessThe DOI matches its Crossref record; 136 of the 137 references it cites were found in a registry or an index.
Abstract
Biodegradable Mg‐based metals may be promising orthopedic implants for treating challenging bone diseases, attributed to their desirable mechanical and osteopromotive properties. This Review summarizes the current status and future research trends for Mg‐based orthopedic implants. First, the properties between Mg‐based implants and traditional orthopedic implants are compared on the following aspects: in vitro and in vivo degradation mechanisms of Mg‐based implants, peri‐implant bone responses, the fate of the degradation products, and the cellular and molecular mechanisms underlying the beneficial effects of Mg ions on osteogenesis. Then, the preclinical studies conducted at the low weight bearing sites of animals are introduced. The innovative strategies (for example, via designing Mg‐containing hybrid systems) are discussed to address the limitations of Mg‐based metals prior to their clinical applications at weight‐bearing sites. Finally, the available clinical studies are summarized and the challenges and perspectives of Mg‐based orthopedic implants are discussed. Taken together, the progress made on the development of Mg‐based implants in basic, translational, and clinical research has laid down a foundation for developing a new era in the treatment of challenging and prevalent bone diseases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures











Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Biodegradable Mg alloys have emerged as potent alternatives for treating IBDs [5,6], offering bone-matched mechanical properties, osteoimmunomodulation via Mg2+/H2 release, and inherent antibacterial effects from degradation products or alloying elements (e.g., Zn, Ag, Cu) [[5], [6], [7], [8]].”
From Nanocatalytic magnesium osteoimplants with biodegradable self-adaptive interfaces for therapeutic repair of infected bone defects (2026) · cites this paper as [5]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, rapid corrosion of unmodified Mg can cause premature failure, excessive ion/gas accumulation, and inflammation [5,9].”
From Nanocatalytic magnesium osteoimplants with biodegradable self-adaptive interfaces for therapeutic repair of infected bone defects (2026) · cites this paper as [5]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED ARTICLE: In vitro and in vivo responses of macrophages to magnesium-doped titanium
Li, B., Cao, H., Zhao, Y., Cheng, M., Qin, H., Cheng, T., Hu, Y., Zhang, X., & Liu, X. (2017) · Scientific Reports · doi:10.1038/srep42707 · Cited by 76
RetractedEpidemiology and outcomes of osteoporotic fractures
Cummings, S. R., & Melton, L. J. (2002) · The Lancet · doi:10.1016/s0140-6736(02)08657-9 · Cited by 3,821
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Coupling of angiogenesis and osteogenesis by a specific vessel subtype in bone
Kusumbe, A. P., Ramasamy, S. K., & Adams, R. H. (2014) · Nature · doi:10.1038/nature13145 · Cited by 2,155
Shane, E., Burr, D., Abrahamsen, B., Adler, R. A., Brown, T. D., Cheung, A. M., Cosman, F., Curtis, J. R., Dell, R., Dempster, D. W., et al. (2014) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.1998 · Cited by 2,147
Osteoimmunology: shared mechanisms and crosstalk between the immune and bone systems
Takayanagi, H. (2007) · Nature Reviews Immunology · doi:10.1038/nri2062 · Cited by 1,878
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Research works printed but not linked: 9
- Haseeb M., 2017, Int. J. Health Sci., 11, 1
- 10.1016/j.actbio.2017.09.018 · DOI
- Chen X. D., 2017, J. Orthop. Transl., 10, 1
- 10.1016/j.biomaterials.2017.12.007 · DOI
- 10.1016/j.biomaterials.2015.12.005 · DOI · Paper page
- Windolf M., 2014, Proc. of the Int. Conf. on Biomedical Electronics and Devices, 243
- 10.1038/s41586-018-0650-9 · DOI · Paper page
- 10.1016/j.biomaterials.2016.10.017 · DOI · Paper page
- Cao Y., 2014, Angiogenic Factors, Cancer Therapy. Atlas Genet Cytogenet Oncol Haematol., 18, 447
Cited by
Items 401–500 of 646
Dunne, R. A., Dickel, D., Green, A., Kim, D. Y., Priddy, L. B., & Priddy, M. W. (2024) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35519 · Cited by 6
Zhou, S., Chen, S., Du, P., Yan, R., Yuan, B., Cai, Z., Zhang, L., & Xie, G. (2025) · Intermetallics · doi:10.1016/j.intermet.2025.108791 · Cited by 6
Duan, Q., Shao, H., Luo, N., Wang, F., Cheng, L., Ying, J., & Zhao, D. (2025) · PubMed · doi:10.7507/1002-1892.202503081 · Cited by 6
Properties of gyroid structure of cobalt-based alloy obtained by LPBF method
Falkowska, A., Doroszko, M., Ostapiuk, M., Zasińska, K., & SEWERYN, A. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110754 · Cited by 6
Bühring, J., Voshage, M., Schleifenbaum, J. H., Jahr, H., & Schröder, K. (2021) · Materials · doi:10.3390/ma14206027 · Cited by 6
“In particular, the use of zinc (Zn), magnesium (Mg), iron (Fe) and their alloys, are increasingly coming into focus for orthopaedic applications [10,11].”
BackgroundMillán-Ramos, B., Morquecho-Marín, D., Silva-Bermúdez, P. S., Ramírez-Ortega, D., Depablos‐Rivera, O., García‐López, J., Fernández-Lizárraga, M., Almaguer‐Flores, A., Victoria‐Hernández, J., Letzig, D., et al. (2022) · Materials · doi:10.3390/ma15093142 · Cited by 6
Huang, Y.-T., Wu, W., Hung, F., Kuan, F., Hsu, K., Su, W., & Yen, C.-W. (2022) · Bioengineering · doi:10.3390/bioengineering9100542 · Cited by 6
“Magnesium is a potential implant with a density of about 1.74 g/cm3 and an elastic modulus of about 40 GPa [1].”
BackgroundInfluentialEffect of TiN Coating on the Structure, Mechanical Properties and Fracture of the Mg-Ca-Zn Alloy
Khrustalyov, A. P., Monogenov, A. N., Baigonakova, G. A., Akhmadieva, A. A., Marchenko, E. S., & Vorozhtsov, A. (2022) · Metals · doi:10.3390/met12122140 · Cited by 6
Radwan-Pragłowska, J., Janus, Ł., Galek, T., Szajna, E., Sierakowska, A., Łysiak, K., TUPAJ, M., & Bogdał, D. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14070338 · Cited by 6
“Currently, magnesium constitutes the most relevant and promising material that can used for the preparation of metallic implants due to its superiority, which results from its susceptibility to biodegradation under in vivo conditions [10,11].”
BackgroundInvestment Castings of Magnesium Alloys: A Road Map and Challenges
Vyas, A. V., & Sutaria, M. P. (2022) · Archives of Foundry Engineering · doi:10.24425/afe.2022.140247 · Cited by 6
Hou, R., Li, Y., Jiang, P., Zhu, S., Wang, L., & Guan, S. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2024.130425 · Cited by 6
Claver, A., Quintana, I., Fernández, I., Santiago, J. A., Díaz‐Rodríguez, P., Panizo-Laiz, M., Zalakain, I., Urroz, J. C., & García, J. A. (2025) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2025.132258 · Cited by 5
Metal semiconductor materials in bone diseases: properties, applications, and future perspectives
Sun, W., Wu, Y., Sha, J., Song, X., Sun, Z., Cheng, X., Yuan, T., Qian, H., Yang, X., Tang, Z., et al. (2025) · Burns & Trauma · doi:10.1093/burnst/tkaf055 · Cited by 5
Zhang, K., Sun, Y., He, J., Li, W., Liu, C., & Li, Q. (2025) · JOM · doi:10.1007/s11837-025-07901-2 · Cited by 5
Wang, W., Ren, J., Wu, X., Zhou, W., Tian, S., Wang, D., Shuai, X., & Yang, Y. (2026) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2025.101979 · Cited by 5
Bioresorbable Systems in Healthcare for Transient Sensing and Therapeutic Interventions
Kim, J., Seo, Y., & Kim, J. (2026) · Advanced Therapeutics · doi:10.1002/adtp.202500544 · Cited by 5
Liao, T., Pu, Y., Zhang, X., Zhu, B., & Tang, H. (2021) · Protection of Metals and Physical Chemistry of Surfaces · doi:10.1134/s2070205121050178 · Cited by 5
Evaluation of the biocompability and corrosion activity of resorbable CaMgZnYbBAu alloys
Szyba, D., Kubina, R., Młynarek-Żak, K., Radoń, A., Kania, A., & Babilas, R. (2022) · Scientific Reports · doi:10.1038/s41598-022-25069-6 · Cited by 5
“(3) After the alloy extraction period the sample was removed and the medium was centrifuged (4).”
Yang, H., Zhang, F., Xu, H., Wang, J., Li, H., Li, L., Shao, M., Wang, H., Jia, P., Niu, J., et al. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01364 · Cited by 5
Self-citationPreparation and evaluation of HA–PP coating on AZ31B magnesium alloy for implant applications
Singh, A. K., Mahto, V. K., & Malik, A. (2024) · Surface Engineering · doi:10.1177/02670844241235763 · Cited by 5
Magnesium-based bioceramic-enhanced composites fabricated via friction stir processing
Dargusch, M. S., Yang, N., Balasubramani, N., Venezuela, J., Liu, S., Jing, L., Yu, S., Qu, J., Wang, G., & Cairney, J. M. (2024) · Smart Materials in Medicine · doi:10.1016/j.smaim.2024.08.006 · Cited by 5
Sandwich-like chitosan/collagen barrier membrane with passivated magnesium mesh as the skeleton
Guo, S., Yang, M., Xu, Z., Ge, L., Mu, C., & Li, D. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.142590 · Cited by 5
Liu, W., Chang, H.-W., Huang, S.-I., Yang, K., Tsai, P., Chen, C., Wang, Y., Ma, C.-H., Chen, C., & Fu, Y. (2025) · npj Materials Degradation · doi:10.1038/s41529-025-00602-w · Cited by 5
“The rapid degradation and hydrogen gas production posed challenges for Mg-based implants 12 .”
Salahi, S. A., Nemati, N. H., Khalaj, G., & Abbasi, S. M. (2025) · AIP Advances · doi:10.1063/5.0275689 · Cited by 5
Construction of bio-functional Mg/HA composite layered coating for orthopedic application
Wan, P., Yan, X., Li, M., Zhao, M., Zhang, Y., & Yang, K. (2021) · Science China Technological Sciences · doi:10.1007/s11431-020-1762-3 · Cited by 5
Shang, Z., Li, D., Chen, J., Wang, M., Zhang, B., Wang, X., & Ma, B. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.789498 · Cited by 5
“Magnesium and its alloy had received increasing attention as a potential medical degradable metal, and some products had been used in clinic (Zhao et al., 2016; Li et al., 2020; Wang et al., 2020).”
BackgroundBiomechanical evaluation of magnesium plates for management of mandibular angle fracture
Mohammed, A. (2021) · British Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.bjoms.2021.11.001 · Cited by 5
Tharaknath, S., & Rahamathullah, I. (2022) · Bulletin of the Chemical Society of Ethiopia · doi:10.4314/bcse.v37i1.7 · Cited by 5
“The modulus of Mg and its alloys closes to bone modulus [3].”
BackgroundDegradation Rate Assessment of Biodegradable Magnesium Alloys
Cao, B., Cao, L., & Kallmes, D. F. (2024) · Materials Sciences and Applications · doi:10.4236/msa.2024.158017 · Cited by 5
Kim, S.-Y., Kim, Y., Jang, Y., & Lee, M. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.105936 · Cited by 5
Gao, S., Lyu, S., Zhao, Q., & Chen, M. (2025) · Metals · doi:10.3390/met15030337 · Cited by 5
“The total Mg concentration in adult plasma ranges from 0.65 mM to 1.05 mM [9], with a recommended daily intake of approximately 300 mg [10–12].”
InfluentialBarylski, A., & Aniołek, K. (2022) · Tribologia : tarcie, zużycie, smarowanie · doi:10.5604/01.3001.0016.1603 · Cited by 5
Fu, R., Zhao, X., Liu, Y., Qiao, A., & Yang, H. (2025) · Annals of Biomedical Engineering · doi:10.1007/s10439-025-03741-y · Cited by 4
Marchenko, E. S., Khabibova, E., Zhukov, I., Butyagin, P. I., Khrustalyov, A. P., Гордиенко, И. И., Chernyii, S. P., Baigonakova, G. A., Arbuzova, S. S., Chekalkin, T. L., et al. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.113820 · Cited by 4
Microstructure refinement and in vivo evaluation of biodegradable magnesium metal matrix composites
Sotoudehbagha, P., Grise, A., Romero, A., Larraza, A., Latt, S., Flores, A. C., Romero, K., Lovejoy, J., & Razavi, M. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.09.116 · Cited by 4
Engineering in healthcare: a comprehensive review on 3D ‐printed biopolymer‐based implants
Rishi, L., Singh, D., Srivastava, V., & Gupta, V. (2025) · Polymer International · doi:10.1002/pi.70052 · Cited by 4
A biodegradable high-purity magnesium closing clip for general surgery
Ni, J., Wang, W., Xu, H., Jiang, M., Liu, X., Lou, Y., Yan, J. F., Chen, Y.-G., & Zhang, X. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.11.040 · Cited by 4
Kolawole, M. Y., Anwar, S., Bozkaya, E., Bulutsuz, A. G., Karahan, S., Yılmazer, H., & Iqbal, F. (2025) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-025-06963-7 · Cited by 4
“For biomedical applications, this mild alkalization is bene fi cial because it inhibits the sharp pH increase that is frequently observed previously in Mg-based implants [43] while also encouraging the deposition of hydroxyapatite, which improves osteointegration and bone bonding.”
Optimizing Electrochemical Deposition for Biodegradable Zinc-Hydroxyapatite Systems in Bone Repair
Gorejová, R., Mojzisova, I., Harea, E., Sopčák, T., & Özaltın, K. (2025) · ACS Omega · doi:10.1021/acsomega.5c08241 · Cited by 4
Gan, L., Cheng, Y., Li, Z., Zhang, M., Li, H., Wang, Q., 梁芳慧, Mu, D., & Li, Z. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.115387 · Cited by 4
New Advances of Degradable Magnesium‐Based Metal Biomaterials in the Field of Orthopedics
Yu, J., Jia, S., Sun, R., Zhang, T., Bai, L., Mei, D., Zhu, S., Chen, L., & Guan, S. (2025) · Rare Metals · doi:10.1002/rar2.70101 · Cited by 4
He, J., Li, Y., Zhang, X., He, A., Xiong, C., Sun, L., Chen, X., Liu, L., Tu, Y., & Zeng, D. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.115477 · Cited by 4
Chen, H.-J., Gautam, P. C., Lin, P.-C., Wang, C.-K., & Lin, H.-C. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.186706 · Cited by 4
Tailoring microstructure and corrosion behavior of Mg-10Gd-1Eu-1Zn-0.2Zr alloy for biomedical use
Falci, L. D., de Gouveia, G. L., Nogueira, R. P., Koga, G. Y., & Spinelli, J. E. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.186828 · Cited by 4
Xu, L., Chen, X., Cao, Z., Zheng, G., Li, Z., Yang, X., Xie, H., & Chen, S. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag061 · Cited by 4
Biodegradable Zn‐Based Implants: Progress, Challenges, and Pathways toward Clinical Translation
Zhao, P., Wang, Z., Yang, H., Zhang, X., Liu, H., Lu, X., Li, X., Liu, Y., Zhao, X., Zhou, W., et al. (2026) · Advanced Science · doi:10.1002/advs.76066 · Cited by 4
“Conventional metal implants, such as stainless steel, titanium alloys, and cobalt-chromium alloys [ 2 ], have been widely used in clinical practice for their excellent mechanical properties and long-term clinically proven stability [ 3 ].”
H, S. P., Manne, B., & Prakrathi, S. (2022) · Journal of Bio- and Tribo-Corrosion · doi:10.1007/s40735-022-00634-8 · Cited by 4
Influence of element Bi and MAO treatment on the corrosion resistance of magnesium implant
Jia, S., Yu, H., Li, B., Zhang, Y., Wang, D., Li, H., Liang, C., & Wang, H. (2023) · Materials Letters · doi:10.1016/j.matlet.2023.135443 · Cited by 4
Bioactive and Protective Calcium Orthophosphate (CaPO4) Deposits on Magnesium and Its Alloys
Dorozhkin, S. V. (2025) · Corrosion and Materials Degradation · doi:10.3390/cmd6010009 · Cited by 4
Şahin, M. C., Erdoğan, T., & Udriștioiu, M. T. (2025) · Radiation effects and defects in solids · doi:10.1080/10420150.2025.2526386 · Cited by 4
“Compared to other metallic implants, the corrosion byproducts of Mg alloys are non-toxic and can be safely eliminated through human metabolism ( 15 ).”
Deviprasad, M. J., & Rikhari, B. (2025) · Journal of Bio- and Tribo-Corrosion · doi:10.1007/s40735-025-01045-1 · Cited by 4
Becerra, L. H. C., Rodríguez, M. A. L. H., de León, J. P., Arroyo, R. L., Esquivel‐Solís, H., Pérez, E. N., & Torres-Castro, A. (2021) · Crystals · doi:10.3390/cryst11111416 · Cited by 4
Mohamed, S. O., Gambaro, S., Ramirez-Ledesma, A. L., Paternoster, C., & Mantovani, D. (2023) · Crystals · doi:10.3390/cryst13050753 · Cited by 4
“Furthermore, the formation of stable degradation products, such as Fe oxides, phosphates and carbonates, and Mn phosphates, carbonates and hydroxides [14], in a physiological environment, could be dangerous due to their local and systemic accumulation [15].”
BackgroundMaterials and Technology for Implant Manufacturing: Challenges and Opportunity
Tiwari, H. K., Srivastava, A. K., Kumar, P., Singh, M. K., Kumar, H., & Bhadauria, A. (2023) · Advances in chemical and materials engineering book series · doi:10.4018/978-1-6684-9224-6.ch004 · Cited by 4
Shi, Q., Wu, H., Gao, Z., Wang, D., Wang, J., Yang, Y., & Li, R. (2023) · Materials · doi:10.3390/ma16196423 · Cited by 4
“Another vital superiority of the Mg alloy is that its modulus is similar to bone, which prevents the stress shielding of bone tissue effectively [6].”
BackgroundSelf-citationZheng, L., Zhang, R., Chen, X., Luo, Y., Du, W., Zhu, Y., Ruan, Y. C., Xu, J., Wang, J., & Qin, L. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad5241 · Cited by 4
“Most import-antly, the Mg ions released during in vivo degradation have both direct and indirect effects on osteogenesis, angiogenesis, neurogenesis, and osteoimmun-omodulation, hence promoting bone regeneration and enhancing healing or regeneration in treating various bone disorders [1, 8–15].”
InfluentialSelf-citationCharacterizing effects of hydrogen ingress in Ti–Mg based hybrid implant materials
Kumar, R., Solís, C., Trtik, P., Kriele, A., Limberg, W., Wieland, D. C. F., Moosmann, J. P., Serdechnova, M., Blawert, C., Ebel, T., et al. (2025) · RSC Advances · doi:10.1039/d4ra08586h · Cited by 4
Liang, W., Wang, W.-S., Gao, P., Lin, Z., Chen, L., Yu, Y., Zhang, B., Subin, B., Wu, X., & Zhang, T. (2025) · Rare Metals · doi:10.1007/s12598-025-03322-x · Cited by 4
“However, it is essential to optimize the degradation rate of Mg alloys further and enhance mechanical strength to treat bone defects in high-load regions, especially osteonecrosis of the femoral head [14].”
InfluentialLupescu, S. C., Munteanu, C., Sindilar, E. V., Istrate, B., Mihai, I., Oprișan, B., & Pașca, S. A. (2022) · Materials · doi:10.3390/ma15175958 · Cited by 4
“[26] presented in their study research about magnesium alloys compared with natural bone.”
BackgroundHelmholz, H., Adejube, B., Luthringer-Feyerabend, B., & Willumeit‐Römer, R. (2021) · Materials · doi:10.3390/ma14175005 · Cited by 4
Zheng, B., Li, H., Wang, J., Wu, W., Ou, J., & Shen, C. (2022) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-022-00588-0 · Cited by 4
Self-citationThe Bioactive Mg-Zn-Gd Wire Enhances Musculoskeletal Regeneration: An In Vitro Study
He, X. M., Li, Y., Miao, H., Sun, J., Ong, M. T., Zu, H., & Li, W. (2022) · Crystals · doi:10.3390/cryst12091287 · Cited by 4
Fluorescent In Situ 3D Visualization of Dynamic Corrosion Processes of Magnesium Alloys
Tong, X., Bian, D., Hao, L., Wang, L., Ma, L., Gao, M., & Wang, Y. (2022) · ACS Applied Bio Materials · doi:10.1021/acsabm.2c00167 · Cited by 4
Zhang, C., Liang, C., Liu, L., Meng, S., Chen, S., Pang, H., & Zhang, Q. (2024) · Matéria (Rio de Janeiro) · doi:10.1590/1517-7076-rmat-2024-0567 · Cited by 3
Zhang, L., Zhang, Y., Sun, J., Duan, S., Zhao, Z., Wang, P., Shen, J., & Lei, H. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114121 · Cited by 3
Zhou, K. X., Lu, Q., Feng, J., Zhang, P., Yan, H., & Shi, H. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138117 · Cited by 3
Bai, R., Wang, C., Li, Z., Miao, Y., Tao, H., & Wang, L. (2025) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2025.106586 · Cited by 3
Firoozabadi, A. A., Tafti, M. R., Nikeghbali, G., Velayati, M., Fallahzadeh, M. R., & Nabian, M. H. (2026) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbmb.70023 · Cited by 3
Gaziano, P., Zoboli, L., Gizzi, A., & Vairo, G. (2026) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2026.106079 · Cited by 3
Zhang, K., Sun, Y., Li, W., He, J., Chen, W., & He, C. (2026) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-026-01500-x · Cited by 3
“This characteristic positions them as materials with immense application potential in biomedical fields [6, 7 ].”
Nie, Z., Sun, Y., Li, K., Matinlinna, J. P., Palin, W. M., Grover, L. M., & Zhang, Z. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.103183 · Cited by 3
“The presence of both magnesium particles and their degradation products create a favorable temporal window to guide host immune responses, which appears central to the therapeutic efficacy of MAE [35, 36].”
Exploring the 3D bulk corrosion mechanism of a novel laser powder bed fused Mg-Nd-0.2Cu alloy
Wang, T., Chang, C., Cox, S. C., Cui, Z., Yan, X., Gao, S., Cheng, W., Zhang, X., Ma, K., Liu, M., et al. (2026) · Corrosion Science · doi:10.1016/j.corsci.2026.113994 · Cited by 3
Zhao, K., Li, X. Q., Liu, W., Wan, X., Wu, J., Xue, J., Zhang, C., Long, S., Peng, P., & Dai, Q. (2026) · Corrosion Science · doi:10.1016/j.corsci.2026.114083 · Cited by 3
Synthesis of TiO2 nanostructures and their medical applications
Junkar, I., Benčina, M., Rawat, N., Mihelič, R., Trebše, R., & Iglič, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-90538-1.00001-7 · Cited by 3
Song, Z.-G., Mu, Y., Xiao, G., Xie, M., Gong, G., & Lu, Y. (2024) · Nano Materials Science · doi:10.1016/j.nanoms.2024.06.011 · Cited by 3
Zhang, Q., Chen, Y., Jiang, Q., Sui, B., Rao, D., Wang, J., Yuan, G., & Liu, X. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102567 · Cited by 3
Self-citationPuccetti, M., Cusati, E., Antognelli, C., Ricci, M., Ambrogi, V., & Schoubben, A. (2023) · Polymers · doi:10.3390/polym15102246 · Cited by 3
“The degradation products of Mg alloy have been shown to be safe [6], but a too-rapid release of hydrogen gas and OH − , and the consequent effect of a rise in pH, makes the environment incompatible with surrounding tissue [7].”
BackgroundEffect of grain refinement on biomineralization and biodegradation of Mg–Ca alloy
Krishna, R., Rabeeh, V. M., Rahim, S. A., Joseph, M., & Hanas, T. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01192-6 · Cited by 3
Harshavardhan, B., Spandana, K., Purushotham, A., Reddy, T. C. S., & Sunil, B. R. (2024) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2024.2378260 · Cited by 3
A strategy for introducing biopotency-enhanced chirality coating on bio-magnesium
Zhao, Y., Huang, W., Ma, D., Zhao, Q., Qiu, X., Liu, J., Feng, C., & Guan, S. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.113372 · Cited by 3
Öteyaka, M. Ö., Köse, E., Hoşgün, S., Aksu, S., Çınar, E., & Emiroğlu, Ö. (2023) · Canadian Metallurgical Quarterly · doi:10.1080/00084433.2023.2259188 · Cited by 3
“The HA as nano or macro powder size was widely used as dental fi ller or implant coating [5,47,48].”
Millán-Ramos, B., Victoria‐Hernández, J., Letzig, D., & Rodil, S. E. (2024) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/6.0003242 · Cited by 3
Anand, N., Manglam, M. K., & Kar, M. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-10171-9 · Cited by 2
[Latest research progress of rare earth-magnesium alloys in orthopedics].
Sun, Z., Zuo, K., Zhu, X., Yue, H., & Gao, Z. (2025) · PubMed · doi:10.12122/j.issn.1673-4254.2025.02.24 · Cited by 2
Chen, Y., Zhang, C., Hu, B., Jiang, J., Zhao, H., Zhu, F., Zhang, F., Dang, P., Wang, J., Zeng, W., et al. (2025) · Nano Research · doi:10.26599/nr.2025.94907548 · Cited by 2
Self-citationChen, Y., He, T., Li, X., Qiao, L., Yuan, H., Yi, J., & Wang, Y. (2025) · Metals and Materials International · doi:10.1007/s12540-025-02005-7 · Cited by 2
“However, the application of Mg alloys in clinic has been limited by their high susceptibility to corrosion and, to a lesser extent, by their inferior mechanical properties compared to other biomedical metals such as Ti alloys and stainless steels [2, 4, 5].”
A Three-Dimensional Printed Porous PLA Polymer Implant: A Critical Review
Mohammad, A. H., Njim, E. K., Jweeg, M. J., & Al‐Waily, M. (2025) · Journal of Engineering and Sustainable Development · doi:10.31272/jeasd.2558 · Cited by 2
Chen, L., Wu, G., Liu, S., Yan, Z., Yue, H., Zhu, J., Ge, N., Wang, Y., Li, Q., Liu, G., et al. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.08.013 · Cited by 2
Properties of Mg62Zn30Ca4Au1Er3 alloy prepared by mechanical alloying
Popis, J., Starczewska, O., Kremzer, M., Gołombek, K., Karolus, M., & Lesz, S. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14685-9 · Cited by 2
“At the same time, there is a growing need among material engineers to create alloys characterized not only by high strength but also by biocompatibility and the possibility of use in environments with difficult operating conditions [3].”
Bryła, K., Krystian, M., Horky, J., Mingler, B., Faryna, M., & Chulist, R. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.186608 · Cited by 2
Polymeric coatings integrated with drug-loaded micro and nanostructures for bioimplant applications
Shahnavaz, A., Moghaddam, M. M., & Mohammadloo, H. E. (2026) · Biomedical Materials · doi:10.1088/1748-605x/ae4153 · Cited by 2
“…in physiological environments can hasten the production of hydrogen gas, and as a result its accumulation can bring about cytotoxic effects [7], which can be integrated with pre-implant infections to create a suitable environment for fibrosis or fibrous accumulation [8], which are the main…”
Mousavian, S. M. H., & Bautin, V. A. (2026) · Annals of Biomedical Engineering · doi:10.1007/s10439-026-04001-3 · Cited by 2
“Mg -based implants have garnered significant attention in biomedical engineering due to their unique combination of biodegradability, biocompatibility, and mechanical properties similar to human bone [1–3].”
Illing, B., Schultheiss, J., Schumacher, L., Kimmerle-Mueller, E., Roehler, A., Heiss, A., Klotz, U. E., Okafor, V. O., Krajewski, S., & Rupp, F. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17030146 · Cited by 2
Ion‐Chelating Hydrogel Regulates Porous Zinc Scaffold Degradation for Osteoimmune Bone Repair
Wang, J., Wang, M., Zhong, C., Yan, J., He, J., Huang, X., Fang, J., & Ren, F. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505864 · Cited by 2
Self-citationDu, H., Lei, S., Wu, J., He, Y., Yuan, L., Ge, L., Mu, C., Xu, Z., & Li, D. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.176833 · Cited by 2
Aravinth, K., & Suresh, S. (2026) · Ceramics International · doi:10.1016/j.ceramint.2026.06.289 · Cited by 2
Mao, Z., Bi, X., Qin, Y., Li, M., Tilieke, M., Ma, K., Chen, L., Zheng, R., Jie, Y., Jing, J., et al. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.07.062 · Cited by 2
Self-citationRecent Advances in Biomaterial Design for Bone Regenerative Therapy: A Mini Review
Hadri, N. A. B., Arifin, N., Ghazalli, N. F., Shaari, R., Noordin, K. B. A. A., & Yusop, N. (2023) · Current Materials Science · doi:10.2174/2666145416666230228120343 · Cited by 2
Wu, W., Bakhet, S., Asante, N. A., Kareem, S., Kombo, O. R., Li, B., & Dai, H. (2023) · Journal of Inorganic Materials · doi:10.15541/jim20220662 · Cited by 2
Influence of Co-doping on Soft Spark Micro-arc Oxidation on ZrO2–AZ91D Magnesium Alloy
Tang, Q., Li, X., Liu, G., Zhai, D., & Shen, J. (2024) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-023-07280-w · Cited by 2
Metadata
- Authors
- Wang, J., Xu, J., Hopkins, C., Chow, D. H., & Qin, L.
- Affiliations
- School of Biomedical Engineering Sun Yat‐sen University Guangzhou 510006 P. R. China
- Chinese University of Hong Kong (HK)
- Corresponding author
- Qin, Ling
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2020-02-28
- Volume
- 7
- Issue
- 8
- Pages
- 1902443-1902443
- ISSN
- 2198-3844 (ISSN-L)
- PMC
- PMC7175270
- OpenAlex
- W3007391939
- Semantic Scholar
- 0a59975a949f6f5208b92e0101abde435a9657c9
- Cited by
- 574
- References
- 137
- Citations by year
- 2026: 58 · 2025: 111 · 2024: 113 · 2023: 110 · 2022: 99 · 2021: 66 · 2020: 15
- FWCI
- 4.85
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Advanced Science (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (81702165, 81802152)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Materials Chemistry › Titanium Alloys Microstructure and Properties
- Keywords
- biodegradable magnesium implants, orthopedic implants, degradation products, bone disease, clinical translation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.