The DOI matches its Crossref record.
In Situ Formation of Protective Coatings on Sulfur Cathodes in Lithium Batteries with LiFSI‐Based Organic Electrolytes
Abstract
Development of sulfur cathodes with 100% coulombic efficiency (CE) and good cycle stability remains challenging due to the polysulfide dissolution in electrolytes. Here, it is demonstrated that electrochemical reduction of lithium bis(fluorosulfonyl)imide (LiFSI) based electrolytes at a potential close to the sulfur cathode operation forms in situ protective coating on both cathode and anode surfaces. Quantum chemistry studies suggest the coating formation is initiated by the FSI(‐F) anion radicals generated during electrolyte reduction. Such a reduction additionally results in the formation of LiF. Accelerated cycle stability tests at 60 °C in a very simple electrolyte (LiFSI in dimethoxyethane with no additives) show an average CE approaching 100.0% over 1000 cycles with a capacity decay less than 0.013% per cycle after stabilization. Such a remarkable performance suggests a great promise of both an in situ formation of protective solid electrolyte coatings to avoid unwanted side reactions and the use of a LiFSI salt for this purpose.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
Self-citationHigh rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Self-citationGuidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Self-citationAdvances and issues in developing salt-concentrated battery electrolytes
Yamada, Y., Wang, J., Ko, S., Watanabe, E., & Yamada, A. (2019) · Nature Energy · doi:10.1038/s41560-019-0336-z · Cited by 1,788
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Cheng, X., Zhang, R., Zhao, C., Wei, F., Zhang, J., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500213 · Cited by 1,786
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Review on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Conversion cathodes for rechargeable lithium and lithium-ion batteries
Wu, F., & Yushin, G. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02326f · Cited by 723
Self-citationZhang, R., Cheng, X., Zhao, C., Peng, H., Shi, J., Huang, J., Wang, J., Wei, F., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201504117 · Cited by 686
Electrode–electrolyte interfaces in lithium-based batteries
Yu, X., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02555f · Cited by 649
Uncharted Waters: Super-Concentrated Electrolytes
Borodin, O., Self, J., Persson, K. A., Wang, C., & Xu, K. (2020) · Joule · doi:10.1016/j.joule.2019.12.007 · Cited by 585
Self-citationDeveloping High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress
Li, S., Jiang, M., Xie, Y., Xu, H., Jia, J., & Li, J. (2018) · Advanced Materials · doi:10.1002/adma.201706375 · Cited by 535
Electrolyte solutions design for lithium-sulfur batteries
Liu, Y., Elias, Y., Meng, J., Aurbach, D., Zou, R., Xia, D., & Pang, Q. (2021) · Joule · doi:10.1016/j.joule.2021.06.009 · Cited by 534
Zheng, J., Lochala, J. A., Kwok, A., Deng, Z. D., & Xiao, J. (2017) · Advanced Science · doi:10.1002/advs.201700032 · Cited by 524
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Bisalt ether electrolytes: a pathway towards lithium metal batteries with Ni-rich cathodes
Alvarado, J., Schroeder, M. A., Pollard, T. P., Wang, X., Lee, J. Z., Zhang, M., Wynn, T., Ding, M., Borodin, O., Meng, Y. S., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02601g · Cited by 439
Self-citationCarbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Self-citationModeling Insight into Battery Electrolyte Electrochemical Stability and Interfacial Structure
Borodin, O., Ren, X., Vatamanu, J., von Wald Cresce, A., Knap, J., & Xu, K. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00486 · Cited by 380
Self-citationCritical effects of electrolyte recipes for Li and Na metal batteries
Zheng, X., Huang, L., Ye, X., Zhang, J., Min, F., Luo, W., & Huang, Y. (2021) · Chem · doi:10.1016/j.chempr.2021.02.025 · Cited by 367
Ren, X., Gao, P., Zou, L., Jiao, S., Cao, X., Zhang, X., Jia, H., Engelhard, M. H., Matthews, B. E., Wu, H., et al. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2010852117 · Cited by 340
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
A Comprehensive Approach toward Stable Lithium–Sulfur Batteries with High Volumetric Energy Density
Pang, Q., Liang, X., Kwok, C. Y., Kulisch, J., & Nazar, L. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601630 · Cited by 321
Anode Improvement in Rechargeable Lithium–Sulfur Batteries
Tao, T., Lu, S., Fan, Y., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700542 · Cited by 304
Song, J., Guo, X., Zhang, J., Chen, Y., Zhang, C., Luo, L., Wang, F., & Wang, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta00212j · Cited by 301
Strategies towards enabling lithium metal in batteries: interphases and electrodes
Horstmann, B., Shi, J., Amine, R., Werres, M., He, X., Jia, H., Hausen, F., Cekic-Laskovic, I., Wiemers-Meyer, S., Lopez, J., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00767j · Cited by 298
Non‐Flammable Liquid and Quasi‐Solid Electrolytes toward Highly‐Safe Alkali Metal‐Based Batteries
Jaumaux, P., Wu, J., Shanmukaraj, D., Wang, Y., Zhou, D., Sun, B., Kang, F., Li, B., Armand, M., & Wang, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008644 · Cited by 289
Hou, L.-P., Zhang, X.-Q., Li, B.-Q., & Zhang, Q. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.021 · Cited by 283
Guo, W., Zhang, W., Si, Y., Wang, D., Fu, Y., & Manthiram, A. (2021) · Nature Communications · doi:10.1038/s41467-021-23155-3 · Cited by 268
Role of Polyacrylic Acid (PAA) Binder on the Solid Electrolyte Interphase in Silicon Anodes
Parikh, P., Sina, M., Banerjee, A., Wang, X., D’Souza, M. S., Doux, J.-M., Wu, E. A., Trieu, O. Y., Gong, Y., Zhou, Q., et al. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b05020 · Cited by 265
Nucleation and Early Stage Growth of Li Electrodeposits
Biswal, P., Stalin, S., Kludze, A., Choudhury, S., & Archer, L. A. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03548 · Cited by 265
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Nan, B., Chen, L., Rodrigo, N. D., Borodin, O., Piao, N., Xia, J., Pollard, T., Hou, S., Zhang, J., Ji, X., et al. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202205967 · Cited by 222
Self-citation
Metadata
- Authors
- Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2014-12-10
- Volume
- 5
- Issue
- 6
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2134363353
- Cited by
- 240
- References
- 0
- FWCI
- 11.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.