The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Defect Engineering in Multinary Earth‐Abundant Chalcogenide Photovoltaic Materials
Abstract
Application of zinc‐blende‐related chalcogenide absorbers such as CdTe and Cu(In,Ga)Se 2 (CIGSe) has enabled remarkable advancement in laboratory‐ and commercial‐scale thin‐film photovoltaic performance; however concerns remain regarding the toxicity (CdTe) and scarcity (CIGSe/CdTe) of the constituent elements. Recently, kesterite‐based Cu 2 ZnSn(S,Se)4 (CZTSSe) materials have emerged as attractive non‐toxic and earth‐abundant absorber candidates. Despite the similarities between CZTSSe and CIGSe/CdTe, the record power conversion efficiency of CZTSSe solar cells (12.6%) remains significantly lower than that of CIGSe (22.6%) and CdTe (22.1%) devices, with the performance gap primarily being attributed to cationic disordering and associated band tailing. To capture the promise of kesterite‐like materials as prospective “drop‐in” earth‐abundant replacements for closely‐related CIGSe, current research has focused on several key directions to control disorder, including: (i) examination of the interaction between processing conditions and atomic site disorder, (ii) isoelectronic cation substitution to introduce ionic size mismatch, and (iii) structural diversification beyond the zinc‐blende‐type coordination environment. In this review, recent efforts targeting accurate identification and engineering of anti‐site disorder in kesterite‐based CZTSSe are considered. Lessons learned from CZTSSe are applied to other complex chalcogenide semiconductors, in an effort to develop promising pathways to avoid anti‐site disordering and associated band tailing in future high‐performance earth‐abundant photovoltaic technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Absence of Diffusion in Certain Random Lattices
Anderson, P. W. (1958) · Physical Review · doi:10.1103/physrev.109.1492 · Cited by 12,468
The continental crust: its composition and evolution
Windley, B. F. (1986) · Physics of the Earth and Planetary Interiors · doi:10.1016/0031-9201(86)90093-2 · Cited by 10,915
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
The Long-Wavelength Edge of Photographic Sensitivity and of the Electronic Absorption of Solids
Urbach, F. (1953) · Physical Review · doi:10.1103/physrev.92.1324 · Cited by 6,047
Assessment of the Perdew–Burke–Ernzerhof exchange-correlation functional
Ernzerhof, M., & Scuseria, G. E. (1999) · The Journal of Chemical Physics · doi:10.1063/1.478401 · Cited by 5,497
Device Characteristics of CZTSSe Thin‐Film Solar Cells with 12.6% Efficiency
Wang, W., Winkler, M. T., Gunawan, O., Gokmen, T., Todorov, T. K., Zhu, Y., & Mitzi, D. B. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301465 · Cited by 3,183
Self-citationFirst-principles calculations for point defects in solids
Freysoldt, C., Grabowski, B., Hickel, T., Neugebauer, J., Kresse, G., Janotti, A., & Van de Walle, C. G. (2014) · Reviews of Modern Physics · doi:10.1103/revmodphys.86.253 · Cited by 3,037
Crystal Defects and Crystalline Interfaces
Bollmann, W. (1970) · Springer eBooks · doi:10.1007/978-3-642-49173-3 · Cited by 1,737
Optical processes in semiconductors
Murray, R. B. (1972) · Journal of Luminescence · doi:10.1016/0022-2313(72)90050-6 · Cited by 1,510
Defect physics of theCuInSe2chalcopyrite semiconductor
Zhang, S. B., Wei, S.-H., Zunger, A., & Katayama-Yoshida, H. (1998) · Physical Review B · doi:10.1103/physrevb.57.9642 · Cited by 1,407
Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells
Chirilă, A., Reinhard, P., Pianezzi, F., Bloesch, P., Uhl, A. R., Fella, C., Kranz, L., Keller, D., Gretener, C., Hagendorfer, H., et al. (2013) · Nature Materials · doi:10.1038/nmat3789 · Cited by 1,285
Generalized Kohn-Sham schemes and the band-gap problem
Seidl, A., Görling, A., Vogl, P., Majewski, J. A., & Levy, M. (1996) · Physical Review B · doi:10.1103/physrevb.53.3764 · Cited by 1,269
Masuko, K., Shigematsu, M., Hashiguchi, T., Fujishima, D., Kai, M., Yoshimura, N., Yamaguchi, T., Ichihashi, Y., Mishima, T., Matsubara, N., et al. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2014.2352151 · Cited by 1,233
Disorder and the Optical-Absorption Edge of Hydrogenated Amorphous Silicon
Cody, G. D., Tiedje, T., Abeles, B., Brooks, B., & Goldstein, Y. (1981) · Physical Review Letters · doi:10.1103/physrevlett.47.1480 · Cited by 1,229
High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber
Todorov, T. K., Reuter, K. B., & Mitzi, D. B. (2010) · Advanced Materials · doi:10.1002/adma.200904155 · Cited by 1,132
Self-citationDevelopment of CZTS-based thin film solar cells
Katagiri, H., Jimbo, K., Maw, W. S., Oishi, K., Yamazaki, M., Araki, H., & Takeuchi, A. (2009) · Thin Solid Films · doi:10.1016/j.tsf.2008.11.002 · Cited by 1,124
Device characteristics of a 10.1% hydrazine‐processed Cu2ZnSn(Se,S)4 solar cell
Barkhouse, D. A. R., Gunawan, O., Gokmen, T., Todorov, T. K., & Mitzi, D. B. (2012) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.1160 · Cited by 826
Self-citationIntrinsic point defects and complexes in the quaternary kesterite semiconductorCu2ZnSnS4
Chen, S., Yang, J.-H., Gong, X. G., Walsh, A., & Wei, S.-H. (2010) · Physical Review B · doi:10.1103/physrevb.81.245204 · Cited by 740
Chen, S., Gong, X. G., Walsh, A., & Wei, S.-H. (2009) · Applied Physics Letters · doi:10.1063/1.3074499 · Cited by 723
Solar cell efficiency tables (version 47)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2016) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2728 · Cited by 650
Scheer, R., & Schock, H. (2011) · Wiley eBooks · doi:10.1002/9783527633708 · Cited by 624
Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS4
Chen, S., Gong, X. G., Walsh, A., & Wei, S.-H. (2010) · Applied Physics Letters · doi:10.1063/1.3275796 · Cited by 570
Band offsets and optical bowings of chalcopyrites and Zn-based II-VI alloys
Wei, S.-H., & Zunger, A. (1995) · Journal of Applied Physics · doi:10.1063/1.359901 · Cited by 504
Cu2ZnSnS4as a potential photovoltaic material: A hybrid Hartree-Fock density functional theory study
Paier, J., Asahi, R., Nagoya, A., & Kresse, G. (2009) · Physical Review B · doi:10.1103/physrevb.79.115126 · Cited by 441
Tutorial: Defects in semiconductors—Combining experiment and theory
Alkauskas, A., McCluskey, M. D., & Van de Walle, C. G. (2016) · Journal of Applied Physics · doi:10.1063/1.4948245 · Cited by 439
CdTe solar cells with open-circuit voltage breaking the 1 V barrier
Burst, J. M., Duenow, J. N., Albin, D. S., Colegrove, E., Reese, M. O., Aguiar, J. A., Jiang, C.-S., Patel, M. K., Al-Jassim, M. M., Kuciauskas, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.15 · Cited by 435
Inverse Design of High Absorption Thin‐Film Photovoltaic Materials
Yu, L., Kokenyesi, R. S., Keszler, D. A., & Zunger, A. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200538 · Cited by 377
Why are kesterite solar cells not 20% efficient?
Siebentritt, S. (2013) · Thin Solid Films · doi:10.1016/j.tsf.2012.12.089 · Cited by 372
Yuan, Z., Chen, S., Xiang, H., Gong, X., Walsh, A., Park, J., Repins, I., & Wei, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502272 · Cited by 370
The current status and future prospects of kesterite solar cells: a brief review
Liu, X., Yu, F., Cui, H., Liu, F., Hao, X., Conibeer, G., Mitzi, D. B., & Green, M. A. (2016) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2741 · Cited by 362
Self-citationA vision for crystalline silicon photovoltaics
Swanson, R. M. (2006) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.709 · Cited by 340
Ford, G. M., Guo, Q., Agrawal, R., & Hillhouse, H. W. (2011) · Chemistry of Materials · doi:10.1021/cm2002836 · Cited by 331
Wurtzite-derived polytypes of kesterite and stannite quaternary chalcogenide semiconductors
Chen, S., Walsh, A., Luo, Y., Yang, J.-H., Gong, X. G., & Wei, S.-H. (2010) · Physical Review B · doi:10.1103/physrevb.82.195203 · Cited by 323
Far infrared studies on stannite and wurtzstannite type compounds
Himmrich, M., & Haeuseler, H. (1991) · Spectrochimica Acta Part A: Molecular Spectroscopy · doi:10.1016/0584-8539(91)80283-o · Cited by 288
Gershon, T., Lee, Y. S., Antunez, P. D., Mankad, R., Singh, S., Bishop, D. M., Gunawan, O., Hopstaken, M., & Haight, R. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502468 · Cited by 278
Theory of band tails in heavily doped semiconductors
Van Mieghem, P. (1992) · Reviews of Modern Physics · doi:10.1103/revmodphys.64.755 · Cited by 249
Tsuji, I., Shimodaira, Y., Kato, H., Kobayashi, H., & Kudo, A. (2010) · Chemistry of Materials · doi:10.1021/cm9022024 · Cited by 234
Gürel, T., Sevik, C., & Çağın, T. (2011) · Physical Review B · doi:10.1103/physrevb.84.205201 · Cited by 228
Towards low-cost, environmentally friendly printed chalcopyrite and kesterite solar cells
Azimi, H., Hou, Y., & Brabec, C. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43865a · Cited by 225
The prediction of semiconducting properties in inorganic compounds
Goodman, C. H. L. (1958) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(58)90050-7 · Cited by 217
Implications for CdTe and CIGS technologies production costs of indium and tellurium scarcity
Candelise, C., Winskel, M., & Gross, R. (2012) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2216 · Cited by 195
Long lifetimes in high-efficiency Cu(In,Ga)Se2 solar cells
Metzger, W. K., Repins, I. L., & Contreras, M. Á. (2008) · Applied Physics Letters · doi:10.1063/1.2957983 · Cited by 187
Accurate solid-state band gaps via screened hybrid electronic structure calculations
Brothers, E. N., Izmaylov, A. F., Normand, J. O., Barone, V., & Scuseria, G. E. (2008) · The Journal of Chemical Physics · doi:10.1063/1.2955460 · Cited by 181
BaCu2Sn(S,Se)4: Earth-Abundant Chalcogenides for Thin-Film Photovoltaics
Shin, D., Saparov, B., Zhu, T., Huhn, W. P., Blum, V., & Mitzi, D. B. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01832 · Cited by 180
Self-citationCZTS-based materials and interfaces and their effects on the performance of thin film solar cells
Huang, T. J., Yin, X., Qi, G., & Gong, H. (2014) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201409219 · Cited by 171
Computational materials design of crystalline solids
Butler, K. T., Frost, J. M., Skelton, J. M., Svane, K. L., & Walsh, A. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00841g · Cited by 149
Introduction to Condensed Matter Physics: Volume 1
Duan, F., & Guojun, J. (2005) · WORLD SCIENTIFIC eBooks · doi:10.1142/5435 · Cited by 146
Doping limits in II–VI compounds — Challenges, problems and solutions
Desnica, U. V. (1998) · Progress in Crystal Growth and Characterization of Materials · doi:10.1016/s0960-8974(98)00011-4 · Cited by 139
Free-to-bound recombination in near stoichiometric Cu 2 ZnSnS 4 single crystals
Levcenko, S., Tézlévan, V. E., Arushanov, E., Schorr, S., & Unold, T. (2012) · Physical Review B · doi:10.1103/physrevb.86.045206 · Cited by 102
Woodhouse, M. A., Goodrich, A. C., Margolis, R., James, T. L., Dhere, R. G., Gessert, T. A., Barnes, T. M., Eggert, R. G., & Albin, D. S. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.03.023 · Cited by 94
From kesterite to stannite photovoltaics: Stability and band gaps of the Cu2(Zn,Fe)SnS4 alloy
Shibuya, T., Goto, Y., Kamihara, Y., Matoba, M., Yasuoka, K., Burton, L. A., & Walsh, A. (2014) · Applied Physics Letters · doi:10.1063/1.4862030 · Cited by 89
Kim, J. H., Choi, S., Choi, M., Gershon, T., Lee, Y. S., Wang, W., Shin, B., & Chung, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501902 · Cited by 64
Lattice thermal conductivity of the Cu3SbSe4-Cu3SbS4 solid solution
Skoug, E. J., Cain, J. D., Morelli, D. T., Kirkham, M., Majsztrik, P. W., & Lara‐Curzio, E. (2011) · Journal of Applied Physics · doi:10.1063/1.3610385 · Cited by 60
Chen, L., Deng, H., Tao, J., Cao, H., Sun, L., Yang, P., & Chu, J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.057 · Cited by 52
Structural, electronic, and optical properties of Cu3-V-VI4 compound semiconductors
Shi, T., Yin, W., Al-Jassim, M. M., & Yan, Y. (2013) · Applied Physics Letters · doi:10.1063/1.4824770 · Cited by 50
Structural characterization of the ternary compound Cu3TaSe4
Delgado, G. E., Mora, A. J., Durán, S., Muñoz, M., & Grima, P. (2006) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2006.08.232 · Cited by 42
Cited by
Yan, C., Huang, J., Sun, K., Johnston, S., Zhang, Y., Sun, H., Pu, A., He, M., Liu, F., Eder, K., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0206-0 · Cited by 861
Perovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Rational Design of Halide Double Perovskites for Optoelectronic Applications
Zhao, X.-G., Yang, D., Ren, J.-C., Sun, Y., Xiao, Z., & Zhang, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.017 · Cited by 508
High‐Performance GeTe‐Based Thermoelectrics: from Materials to Devices
Liu, W., Wang, D., Liu, Q., Zhou, W., Shao, Z., & Chen, Z. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000367 · Cited by 307
Metadata
- Authors
- Shin, D., Saparov, B., & Mitzi, D. B.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-01-13
- Volume
- 7
- Issue
- 11
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2577203270
- Cited by
- 357
- References
- 59
- FWCI
- 13.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.