The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Freestanding Flexible Li2S Paper Electrode with High Mass and Capacity Loading for High‐Energy Li–S Batteries
Abstract
Lithium–sulfur (Li–S) batteries are a very appealing power source with extremely high energy density. But the use of a metallic‐Li anode causes serious safety hazards, such as short‐circuiting and explosion of the cells. Replacing a sulfur cathode with a fully‐lithiated lithium sulfide (Li 2 S) to pair with metallic‐Li‐free high‐capacity anodes paves a feasible way to address this issue. However, the practical utility of Li 2 S cathodes faces the challenges of poor conductivity, sluggish activation process, and high sensitivity to moisture and oxygen that make electrode production more difficult than dealing with sulfur cathodes. Here, an efficient but low‐cost strategy for easy production of freestanding flexible Li 2 S‐based paper electrodes with very high mass and capacity loading in terms of in situ carbonthermal reduction of Li 2 SO 4 by electrospinning carbon is reported. This chemistry enables high loading but strong affinity of ultrafine Li 2 S nanoparticles in a freestanding conductive carbon‐nanofiber network, meanwhile greatly reducing the manufacturing complexity and cost of Li 2 S cathodes. Benefiting from enhanced structural stability and reaction kinetics, the areal specific capacities of such cathodes can be significantly boosted with less sacrificing of high‐rate and cycling capability. This unique Li 2 S‐cathode design can be directly applied for constructing metallic‐Li‐free or flexible Li–S batteries with high‐energy density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Self-citation
Cited by
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
Chen, T., Zhang, Z., Cheng, B., Chen, R., Hu, Y., Ma, L., Zhu, G., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06973 · Cited by 502
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Ren, W., Ma, W., Zhang, S., & Tang, B. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.022 · Cited by 434
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Liu, S., Li, J., Yan, X., Su, Q., Lu, Y., Qiu, J., Wang, Z., Lin, X., Huang, J., Liu, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706895 · Cited by 404
Self-citationElectrochemical energy storage devices working in extreme conditions
Chen, M., Zhang, Y., Xing, G., Chou, S.-L., & Tang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00271f · Cited by 346
Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries
Wang, J., Yi, S., Liu, J., Sun, S., Liu, Y., Yang, D., Xi, K., Gao, G., Abdelkader, A., Yan, W., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c02241 · Cited by 344
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Wang, X., Qian, Y., Wang, L., Yang, H., Li, H., Zhao, Y., & Liu, T. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902929 · Cited by 281
Electrospun nanofiber-based soft electronics
Wang, Y., Yokota, T., & Someya, T. (2021) · NPG Asia Materials · doi:10.1038/s41427-020-00267-8 · Cited by 267
Self-citationDong, S., He, X., Zhang, H., Xie, X., Yu, M., Yu, C., Xiao, N., & Qiu, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04080j · Cited by 264
Self-citationAnode Interface Engineering and Architecture Design for High‐Performance Lithium–Sulfur Batteries
Zhao, Y., Ye, Y., Wu, F., Li, Y., Li, L., & Chen, R. (2019) · Advanced Materials · doi:10.1002/adma.201806532 · Cited by 261
Recent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
Metadata
- Authors
- Yu, M., Wang, Z., Wang, Y., Dong, Y., & Qiu, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-05-09
- Volume
- 7
- Issue
- 17
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2612361113
- Cited by
- 180
- References
- 1
- FWCI
- 10.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.