The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
A Large Scalable and Low‐Cost Sulfur/Nitrogen Dual‐Doped Hard Carbon as the Negative Electrode Material for High‐Performance Potassium‐Ion Batteries
Abstract
Among the negative electrode materials for potassium ion batteries, carbon is very promising because of its low cost and environmental benignity. However, the relatively low storage capacity and sluggish kinetics still hinder its practical application. Herein, a large scalable sulfur/nitrogen dual‐doped hard carbon is prepared via a facile pyrolysis process with low‐cost sulfur and polyacrylonitrile as precursors. The dual‐doped hard carbon exhibits hierarchical structure, abundant defects, and functional groups. The material delivers a high reversible potassium storage capacity and excellent rate performance. In particular, a high reversible capacity of 213.7 and 144.9 mA h g−1 can be retained over 500 cycles at 0.1 A g−1 and 1200 cycles at 3 A g−1, respectively, demonstrating remarkable cycle stability at both low and high rates, superior to the other carbon materials reported for potassium storage, to the best of the authors' knowledge. Structure and kinetics studies suggest that the dual‐doping enhances the potassium diffusion and storage, profiting from the formation of a hierarchical structure, introduction of defects, and generation of increased graphitic and pyridinic N sites. This study demonstrates that a facile and scalable pyrolysis strategy is effective to realize hierarchical structure design and heteroatom doping of carbon, to achieve excellent potassium storage performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors
Brezesinski, T., Wang, J., Tolbert, S. H., & Dunn, B. (2010) · Nature Materials · doi:10.1038/nmat2612 · Cited by 3,359
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Self-citationHeteroatom-doped graphene materials: syntheses, properties and applications
Wang, X., Sun, G., Routh, P., Kim, D.-H., Huang, W., & Chen, P. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00141a · Cited by 1,891
Carbon Electrodes for K-Ion Batteries
Jian, Z., Luo, W., & Ji, X. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06809 · Cited by 1,866
Xu, Y., Zhang, C., Zhou, M., Fu, Q., Zhao, C., Wu, M., & Lei, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-04190-z · Cited by 1,149
Li, Z., Xu, Z., Tan, X., Wang, H., Holt, C. M. B., Stephenson, T., Olsen, B. C., & Mitlin, D. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23599d · Cited by 1,054
Hard Carbon Microspheres: Potassium‐Ion Anode Versus Sodium‐Ion Anode
Jian, Z., Xing, Z., Bommier, C., Li, Z., & Ji, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501874 · Cited by 985
A multifunctional 3.5 V iron-based phosphate cathode for rechargeable batteries
Ellis, B. L., Makahnouk, W. R. M., Makimura, Y., Toghill, K., & Nazar, L. F. (2007) · Nature Materials · doi:10.1038/nmat2007 · Cited by 964
Potassium Ion Batteries with Graphitic Materials
Luo, W., Wan, J., Ozdemir, B., Bao, W., Chen, Y., Dai, J., Lin, H., Xu, Y., Gu, F., Barone, V., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03667 · Cited by 929
Yang, J., Ju, Z., Jiang, Y., Xing, Z., Xi, B., Feng, J., & Xiong, S. (2018) · Advanced Materials · doi:10.1002/adma.201700104 · Cited by 849
Xu, Y., Zhu, Y., Liu, Y., & Wang, C. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200346 · Cited by 847
Self-citationPhosphorus-Based Alloy Materials for Advanced Potassium-Ion Battery Anode
Zhang, W., Mao, J., Li, S., Chen, Z., & Guo, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12185 · Cited by 831
Yang, J., Zhou, X., Wu, D., Zhao, X., & Zhou, Z. (2017) · Advanced Materials · doi:10.1002/adma.201604108 · Cited by 755
Role of Nitrogen-Doped Graphene for Improved High-Capacity Potassium Ion Battery Anodes
Share, K., Cohn, A. P., Carter, R., Rogers, B., & Pint, C. L. (2016) · ACS Nano · doi:10.1021/acsnano.6b05998 · Cited by 725
Lian, P., Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Wang, S., Sun, C., Qin, J., Shi, X., & Bao, X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.002 · Cited by 712
Polyacrylonitrile-based nanofibers—A state-of-the-art review
Nataraj, S. K., Yang, K. S., & Aminabhavi, T. M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.001 · Cited by 662
A high performance sulfur-doped disordered carbon anode for sodium ion batteries
Li, W., Zhou, M., Li, H., Wang, K., Cheng, S., & Jiang, K. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01985k · Cited by 641
A Novel Potassium‐Ion‐Based Dual‐Ion Battery
Ji, B., Zhang, F., Song, X., & Tang, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700519 · Cited by 613
Fu, L., Tang, K., Song, K., van Aken, P. A., Yu, Y., & Maier, J. (2014) · Nanoscale · doi:10.1039/c3nr05374a · Cited by 583
Self-citationMetal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
Short‐Range Order in Mesoporous Carbon Boosts Potassium‐Ion Battery Performance
Wang, W., Zhou, J., Wang, Z., Zhao, L., Li, P., Yang, Y., Yang, C., Huang, H., & Guo, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701648 · Cited by 575
Self-citationGraphitic Carbon Nanocage as a Stable and High Power Anode for Potassium‐Ion Batteries
Cao, B., Zhang, Q., Liu, H., Xu, B., Zhang, S., Zhou, T., Mao, J., Pang, W. K., Guo, Z., Li, A., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801149 · Cited by 561
Hard–Soft Composite Carbon as a Long‐Cycling and High‐Rate Anode for Potassium‐Ion Batteries
Jian, Z., Hwang, S., Li, Z., Hernandez, A. S., Wang, X., Xing, Z., Su, D., & Ji, X. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700324 · Cited by 551
Low-Cost High-Energy Potassium Cathode
Xue, L., Li, Y., Gao, H., Zhou, W., Lü, X., Kaveevivitchai, W., Manthiram, A., & Goodenough, J. B. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12598 · Cited by 550
Self-citationA novel K-ion battery: hexacyanoferrate( ii )/graphite cell
Bie, X., Kubota, K., Hosaka, T., Chihara, K., & Komaba, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00220c · Cited by 509
Nitrogen-rich hard carbon as a highly durable anode for high-power potassium-ion batteries
Chen, C., Wang, Z., Zhang, B., Miao, L., Cai, J., Peng, L., Huang, Y., Jiang, J., Huang, Y., Zhang, L., et al. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.010 · Cited by 468
Sulfur/Oxygen Codoped Porous Hard Carbon Microspheres for High‐Performance Potassium‐Ion Batteries
Chen, M., Wang, W., Liang, X., Gong, S., Liu, J., Wang, Q., Guo, S., & Yang, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800171 · Cited by 454
Self-citationBai, J., Xi, B., Mao, H., Lin, Y., Ma, X., Feng, J., & Xiong, S. (2018) · Advanced Materials · doi:10.1002/adma.201802310 · Cited by 447
Hwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W. (2013) · Nano Letters · doi:10.1021/nl402513x · Cited by 441
Xie, Y., Chen, Y., Liu, L., Tao, P., Fan, M., Xu, N., Shen, X., & Yan, C. (2017) · Advanced Materials · doi:10.1002/adma.201702268 · Cited by 405
He, H., Huang, D., Tang, Y., Wang, Q., Ji, X., Wang, H., & Guo, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.009 · Cited by 401
Power and Technology Scaling into the 5 nm Node with Stacked Nanosheets
Hook, T. B. (2018) · Joule · doi:10.1016/j.joule.2017.10.014 · Cited by 392
Zhou, J., Wang, L., Yang, M., Wu, J., Chen, F., Huang, W., Han, N., Ye, H., Zhao, F., Li, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201702061 · Cited by 381
Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements
Bommier, C., Luo, W., Gao, W.-Y., Greaney, A., Ma, S., & Ji, X. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.064 · Cited by 372
Pistachio‐Shuck‐Like MoSe2/C Core/Shell Nanostructures for High‐Performance Potassium‐Ion Storage
Wang, W., Jiang, B., Qian, C., Lv, F., Feng, J., Zhou, J., Wang, K., Yang, C., Yang, Y., & Guo, S. (2018) · Advanced Materials · doi:10.1002/adma.201801812 · Cited by 368
Self-citationMoS2 as a long-life host material for potassium ion intercalation
Ren, X., Zhao, Q., McCulloch, W. D., & Wu, Y. (2017) · Nano Research · doi:10.1007/s12274-016-1419-9 · Cited by 316
Self-citationActivated carbon from the graphite with increased rate capability for the potassium ion battery
Tai, Z., Zhang, Q., Liu, Y., Liu, H., & Dou, S. (2017) · Carbon · doi:10.1016/j.carbon.2017.07.041 · Cited by 300
Self-citationEngineering Hollow Carbon Architecture for High-Performance K-Ion Battery Anode
Bin, D.-S., Lin, X.-J., Sun, Y.-G., Xu, Y.-S., Zhang, K., Cao, A.-M., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b02178 · Cited by 284
Potassium-Ion Oxygen Battery Based on a High Capacity Antimony Anode
McCulloch, W. D., Ren, X., Yu, M., Huang, Z., & Wu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08037 · Cited by 269
Self-citationRecham, N., Rousse, G., Sougrati, M. T., Chotard, J., Frayret, C., Mariyappan, S., Melot, B. C., Jumas, J. C., & Tarascon, J. (2012) · Chemistry of Materials · doi:10.1021/cm302428w · Cited by 234
Deng, L., Yang, Z., Tan, L., Zeng, L., Zhu, Y., & Guo, L. (2018) · Advanced Materials · doi:10.1002/adma.201802510 · Cited by 215
Qi, X., Huang, K., Wu, X., Zhao, W., Wang, H., Zhuang, Q., & Ju, Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.094 · Cited by 159
Boosting Fast Sodium Storage of a Large‐Scalable Carbon Anode with an Ultralong Cycle Life
Qian, J., Wu, F., Ye, Y., Zhang, M., Huang, Y., Xing, Y., Qu, W., Li, L., & Chen, R. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703159 · Cited by 142
Pyridinic Nitrogen‐Enriched Carbon Nanogears with Thin Teeth for Superior Lithium Storage
Gu, J., Du, Z., Zhang, C., & Yang, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600917 · Cited by 138
Hwang, J., Kim, H. M., Yoon, C. S., & Sun, Y. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00037 · Cited by 124
Cited by
Feng, X., Bai, Y., Liu, M., Li, Y., Yang, H., Wang, X., & Wu, C. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00166c · Cited by 761
Carbon materials for ion-intercalation involved rechargeable battery technologies
Wang, G., Yu, M., & Feng, X. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00187b · Cited by 536
Chang, X., Zhou, X., Ou, X., Lee, C., Zhou, J., & Tang, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902672 · Cited by 263
Metadata
- Authors
- Liu, Y., Dai, H., Wu, L., Zhou, W., He, L., Wang, W., Yan, W., Huang, Q., Fu, L., & Wu, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-07-31
- Volume
- 9
- Issue
- 34
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2966498716
- Cited by
- 261
- References
- 49
- FWCI
- 13.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.