The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Highly Dispersed Cobalt Clusters in Nitrogen‐Doped Porous Carbon Enable Multiple Effects for High‐Performance Li–S Battery
Abstract
The lithium–sulfur (Li–S) battery is considered a promising candidate for the next generation of energy storage system due to its high specific energy density and low cost of raw materials. However, the practical application of Li–S batteries is severely limited by several weaknesses such as the shuttle effect of polysulfides and the insulation of the electrochemical products of sulfur and Li 2 S/Li 2 S 2. Here, by doping nitrogen and integrating highly dispersed cobalt catalysts, a porous carbon nanocage derived from glucose adsorbed metal–organic framework is developed as the host for a sulfur cathode. This host structure combines the reported positive effects, including high conductivity, high sulfur loading, effective stress release, fast lithium‐ion kinetics, fast interface charge transport, fast redox of Li 2 Sn, and strong physical/chemical absorption, achieving a long cycle life (86% of capacity retention at 1C within 500 cycles) and high rate performance (600 mAh g−1 at 5C) for a Li–S battery. By combining experiments and density functional theoretical calculations, it is demonstrated that the well‐dispersed cobalt clusters play an important role in greatly improving the diffusion dynamics of lithium, and enhance the absorption and conversion capability of polysulfides in the host structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationWang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Zhang, L., Su, Z., Jiang, F., Yang, L., Qian, J., Zhou, Y., Li, W., & Hong, M. (2014) · Nanoscale · doi:10.1039/c4nr00348a · Cited by 814
Zhang, P., Sun, F., Xiang, Z., Shen, Z., Yun, J., & Cao, D. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42799d · Cited by 781
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Self-citationA novel synergistic composite with multi-functional effects for high-performance Li–S batteries
Li, Y.-J., Fan, J.-M., Zheng, M.-S., & Dong, Q.-F. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00104a · Cited by 600
Li, Z., Jiang, Y., Yuan, L., Yi, Z., Wu, C., Liu, Y., Strasser, P., & Huang, Y. (2014) · ACS Nano · doi:10.1021/nn503220h · Cited by 590
Pei, F., An, T., Zang, J., Zhao, X., Fang, X., Zheng, M., Dong, Q., & Zheng, N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502539 · Cited by 555
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Zhou, J., Li, R., Fan, X., Chen, Y., Han, R., Li, W., Zheng, J., Wang, B., & Li, X. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01382d · Cited by 492
Metal–Organic Frameworks (MOFs) and MOF-Derived Materials for Energy Storage and Conversion
Zhang, X., Chen, A., Zhong, M., Zhang, Z., Zhang, X., Zhou, Z., & Bu, X.-H. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0024-x · Cited by 481
MOF derived catalysts for electrochemical oxygen reduction
Wang, X., Zhou, J., Fu, H., Li, W., Fan, X., Xin, G., Zheng, J., & Li, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01506a · Cited by 451
Li, Z., Li, C., Ge, X., Ma, J., Zhang, Z., Li, Q., Wang, C., & Yin, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.049 · Cited by 449
Xu, J., Zhang, W., Fan, H., Cheng, F., Su, D., & Wang, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.046 · Cited by 422
Yin, L.-C., Liang, J., Zhou, G.-M., Li, F., Saito, R., & Cheng, H.-M. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.053 · Cited by 412
Self-citationPropelling polysulfides transformation for high-rate and long-life lithium–sulfur batteries
Zheng, C., Niu, S., Lv, W., Zhou, G., Li, J., Fan, S., Deng, Y., Pan, Z., Li, B., Kang, F., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.040 · Cited by 391
Self-citationCarbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
Pang, Q., Kwok, C. Y., Kundu, D., Liang, X., & Nazar, L. F. (2019) · Joule · doi:10.1016/j.joule.2018.09.024 · Cited by 317
Wang, Y., Zhang, R., Pang, Y.-C., Chen, X., Lang, J., Xu, J., Xiao, C., Li, H., Xi, K., & Ding, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.019 · Cited by 312
Self-citationWang, Z., Shen, J., Liu, J., Xu, X., Liu, Z., Hu, R., Yang, L., Feng, Y., Liu, J., Shi, Z., et al. (2019) · Advanced Materials · doi:10.1002/adma.201902228 · Cited by 309
He, J., Chen, Y., Lv, W., Wen, K., Xu, C., Zhang, W., Li, Y., Qin, W., & He, W. (2016) · ACS Nano · doi:10.1021/acsnano.6b05696 · Cited by 305
Sun, L., Li, M., Jiang, Y., Kong, W., Jiang, K., Wang, J., & Fan, S. (2014) · Nano Letters · doi:10.1021/nl501486n · Cited by 288
Li, B., Gu, Z., Kurniawan, N., Chen, W., & Xu, Z. P. (2017) · Advanced Materials · doi:10.1002/adma.201700373 · Cited by 258
Chen, T., Cheng, B., Zhu, G., Chen, R., Hu, Y., Ma, L., Lv, H., Wang, Y., Liang, J., Tie, Z., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04433 · Cited by 237
Zhang, J., Huang, M., Xi, B., Mi, K., Yuan, A., & Xiong, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701330 · Cited by 217
Electrocatalysis in Lithium Sulfur Batteries under Lean Electrolyte Conditions
Yang, Y., Zhong, Y., Shi, Q., Wang, Z., Sun, K., & Wang, H. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808311 · Cited by 204
Jeong, T.-G., Choi, D. S., Song, H., Choi, J., Park, S.-A., Oh, S. H., Kim, H., Jung, Y., & Kim, Y.-T. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00603 · Cited by 197
Miao, L., Wang, W., Yuan, K., et al. (2014) · Chemical Communications · doi:10.1039/c4cc03410d · Cited by 194
Zhou, G., Liu, K., Fan, Y., Yuan, M., Liu, B., Liu, W., Shi, F., Liu, Y., Chen, W., Lopez, J., et al. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00569 · Cited by 187
Self-citationYang, M., Hu, X., Fang, Z., Sun, L., Yuan, Z., Wang, S., Hong, W., Chen, X., & Yu, D. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701971 · Cited by 180
Self-citationGraphene for advanced Li/S and Li/air batteries
Kim, H., Lim, H.-D., Kim, J., & Kang, K. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta12522j · Cited by 174
Zhong, M., Guan, J., Feng, Q., Wu, X., Xiao, Z., Zhang, W., Tong, S., Zhou, N., & Gong, D. (2017) · Carbon · doi:10.1016/j.carbon.2017.11.084 · Cited by 121
Lee, J. S., Jun, J., Jang, J., & Manthiram, A. (2017) · Small · doi:10.1002/smll.201602984 · Cited by 99
Estimation of energy density of Li-S batteries with liquid and solid electrolytes
Li, C., Zhang, H., Otaegui, L., Singh, G., Armand, M. B., & Rodrı́guez-Martı́nez, L. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.109 · Cited by 94
Lee, J. S., & Manthiram, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.049 · Cited by 87
Cited by
Cation-doped ZnS catalysts for polysulfide conversion in lithium–sulfur batteries
Shen, Z., Jin, X., Tian, J., Li, M., Yuan, Y., Zhang, S., Fang, S., Fan, X., Xu, W., Lu, H., et al. (2022) · Nature Catalysis · doi:10.1038/s41929-022-00804-4 · Cited by 621
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Fan, X., Yang, Y., Shi, X., Liu, Y., Li, H., Liang, J., & Chen, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007110 · Cited by 366
Sulfur Reduction Reaction in Lithium–Sulfur Batteries: Mechanisms, Catalysts, and Characterization
Zhou, L., Danilov, D. L., Qiao, F., Wang, J., Li, H., Eichel, R., & Notten, P. H. L. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202094 · Cited by 343
Metadata
- Authors
- Wang, R., Yang, J., Chen, X., Zhao, Y., Zhao, W., Qian, G., Li, S., Xiao, Y., Chen, H., Ye, Y., Zhou, G., & Pan, F.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-01-31
- Volume
- 10
- Issue
- 9
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3003496791
- Cited by
- 315
- References
- 45
- FWCI
- 18.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.