The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Optimized Catalytic WS2–WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium–Sulfur Batteries
Abstract
The lithium–sulfur (Li–S) battery is a next generation high energy density battery, but its practical application is hindered by the poor cycling stability derived from the severe shuttling of lithium polysulfides (LiPSs). Catalysis is a promising way to solve this problem, but the rational design of relevant catalysts is still hard to achieve. This paper reports the WS 2–WO 3 heterostructures prepared by in situ sulfurization of WO 3, and by controlling the sulfurization degree, the structure is controlled, which balances the trapping ability (by WO 3) and catalytic activity (by WS 2) toward LiPSs. As a result, the WS 2–WO 3 heterostructures effectively accelerate LiPS conversion and improve sulfur utilization. The Li–S battery with 5 wt% WS 2–WO 3 heterostructures as additives in the cathode shows an excellent rate performance and good cycling stability, revealing a 0.06% capacity decay each cycle over 500 cycles at 0.5 C. By building an interlayer with such heterostructure‐added graphenes, the battery with a high sulfur loading of 5 mg cm−2 still shows a high capacity retention of 86.1% after 300 cycles at 0.5 C. This work provides a rational way to prepare the metal oxide–sulfide heterostructures with an optimized structure to enhance the performance of Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Synthesis of Large‐Area MoS2 Atomic Layers with Chemical Vapor Deposition
Lee, Y., Zhang, X., Zhang, W., Chang, M., Lin, C., Chang, K., Yu, Y., Wang, J. T., Chang, C., Li, L., et al. (2012) · Advanced Materials · doi:10.1002/adma.201104798 · Cited by 3,422
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells
Ji, L., Rao, M., Zheng, H., Zhang, L., Li, Y., Duan, W., Guo, J., Cairns, E. J., & Zhang, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206955k · Cited by 1,505
Tao, X., Wang, J., Liu, C., Wang, H., Yao, H., Zheng, G., Seh, Z. W., Cai, Q., Li, W., Zhou, G., et al. (2016) · Nature Communications · doi:10.1038/ncomms11203 · Cited by 1,391
Self-citationCatalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationWang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Self-citationZhou, T., Lv, W., Li, J., Zhou, G., Zhao, Y., Fan, S., Liu, B., Li, B., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01430a · Cited by 1,056
Self-citationMechanism and Kinetics of Li2S Precipitation in Lithium–Sulfur Batteries
Fan, F. Y., Carter, W. C., & Chiang, Y. (2015) · Advanced Materials · doi:10.1002/adma.201501559 · Cited by 987
Liu, D., Zhang, C., Zhou, G., Lv, W., Ling, G., Zhi, L., & Yang, Q. (2018) · Advanced Science · doi:10.1002/advs.201700270 · Cited by 956
Self-citationLin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Hydrogen-treated WO3 nanoflakes show enhanced photostability
Wang, G., Ling, Y., Wang, H., Yang, X., Wang, C., Zhang, J. Z., & Li, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03158b · Cited by 766
Ultrathin WS2 Nanoflakes as a High‐Performance Electrocatalyst for the Hydrogen Evolution Reaction
Cheng, L., Huang, W., Gong, Q., Liu, C., Liu, Z., Li, Y., & Dai, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402315 · Cited by 691
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
He, J., Hartmann, G., Lee, M., Hwang, G. S., Chen, Y., & Manthiram, A. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03252a · Cited by 589
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Multi‐Functional Layered WS2 Nanosheets for Enhancing the Performance of Lithium–Sulfur Batteries
Lei, T., Chen, W., Huang, J., Yan, C., Sun, H., Wang, C., Zhang, W., Li, Y., & Xiong, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601843 · Cited by 548
Song, Y., Zhao, W., Kong, L., Zhang, L., Zhu, X., Shao, Y., Ding, F., Zhang, Q., Sun, J., & Liu, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01402g · Cited by 539
Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries
Zhang, Y., Mu, Z., Yang, C., Xu, Z., Zhang, S., Zhang, X., Li, Y., Lai, J., Sun, Z., Yang, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707578 · Cited by 417
Transition Metal Dichalcogenide Atomic Layers for Lithium Polysulfides Electrocatalysis
Babu, G., Masurkar, N., Al Salem, H., & Arava, L. M. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08681 · Cited by 386
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Zhou, G., Zhao, Y., Zu, C., & Manthiram, A. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.029 · Cited by 267
Self-citationLin, H., Zhang, S., Zhang, T., Ye, H., Yao, Q., Zheng, G. W., & Lee, J. Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801868 · Cited by 199
Wu, D. S., Shi, F., Zhou, G., Zu, C., Liu, C., Liu, K., Liu, Y., Wang, J., Peng, Y., & Cui, Y. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.01.020 · Cited by 193
Self-citationAn in-plane heterostructure of graphene and titanium carbide for efficient polysulfide confinement
Zhou, T., Zhao, Y., Zhou, G., Lv, W., Sun, P., Kang, F., Li, B., & Yang, Q.-H. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.07.012 · Cited by 161
Self-citationWei, H., Rodriguez, E. F., Best, A. S., Hollenkamp, A. F., Chen, D., & Caruso, R. A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601616 · Cited by 150
Efficient Catalysis of Hydrogen Evolution Reaction from WS2(1−x)P2x Nanoribbons
Shifa, T. A., Wang, F., Liu, K., Cheng, Z., Xu, K., Wang, Z., Zhan, X., Jiang, C., & He, J. (2017) · Small · doi:10.1002/smll.201603706 · Cited by 70
Topotactic Growth of Edge-Terminated MoS2 from MoO2 Nanocrystals
Dahl‐Petersen, C., Šarić, M., Brorson, M., Moses, P. G., Rossmeisl, J., Lauritsen, J. V., & Helveg, S. (2018) · ACS Nano · doi:10.1021/acsnano.8b00125 · Cited by 36
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Emerging of Heterostructure Materials in Energy Storage: A Review
Li, Y., Zhang, J., Chen, Q., Xia, X., & Chen, M. (2021) · Advanced Materials · doi:10.1002/adma.202100855 · Cited by 794
Emerging Catalysts to Promote Kinetics of Lithium–Sulfur Batteries
Wang, P., Xi, B., Huang, M., Chen, W., Feng, J., & Xiong, S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202002893 · Cited by 451
Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2020) · Advanced Materials · doi:10.1002/adma.202002168 · Cited by 394
Metadata
- Authors
- Zhang, B., Luo, C., Deng, Y., Huang, Z., Zhou, G., Lv, W., He, Y., Wan, Y., Kang, F., & Yang, Q.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-02-27
- Volume
- 10
- Issue
- 15
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3008593992
- Cited by
- 317
- References
- 30
- FWCI
- 18.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.