The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
High‐Entropy Layered Oxide Cathodes for Sodium‐Ion Batteries
Abstract
Material innovation on high‐performance Na‐ion cathodes and the corresponding understanding of structural chemistry still remain a challenge. Herein, we report a new concept of high‐entropy strategy to design layered oxide cathodes for Na‐ion batteries. An example of layered O3‐type NaNi 0.12 Cu 0.12 Mg 0.12 Fe 0.15 Co 0.15 Mn 0.1 Ti 0.1 Sn 0.1 Sb 0.04 O 2 has been demonstrated, which exhibits the longer cycling stability (ca. 83 % of capacity retention after 500 cycles) and the outstanding rate capability (ca. 80 % of capacity retention at the rate of 5.0 C). A highly reversible phase‐transition behavior between O3 and P3 structures occurs during the charge‐discharge process, and importantly, this behavior is delayed with more than 60 % of the total capacity being stored in O3‐type region. Possible mechanism can be attributed to the multiple transition‐metal components in this high‐entropy material which can accommodate the changes of local interactions during Na+ (de)intercalation. This strategy opens new insights into the development of advanced cathode materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703772 · Cited by 2,674
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
High entropy oxides for reversible energy storage
Sarkar, A., Velasco, L., Wang, D., Wang, Q., Talasila, G., de Biasi, L., Kübel, C., Brezesinski, T., Bhattacharya, S. S., Hahn, H., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05774-5 · Cited by 1,351
Gild, J., Zhang, Y., Harrington, T., Jiang, S., Hu, T., Quinn, M. C., Mellor, W. M., Zhou, N., Vecchio, K., & Luo, J. (2016) · Scientific Reports · doi:10.1038/srep37946 · Cited by 1,241
A new class of high-entropy perovskite oxides
Jiang, S., Hu, T., Gild, J., Zhou, N., Nie, J., Qin, M., Harrington, T., Vecchio, K., & Luo, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.08.040 · Cited by 962
Room temperature lithium superionic conductivity in high entropy oxides
Bérardan, D., Franger, S., Meena, A. K., & Dragoe, N. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03249d · Cited by 766
Prototype Sodium‐Ion Batteries Using an Air‐Stable and Co/Ni‐Free O3‐Layered Metal Oxide Cathode
Mu, L., Xu, S., Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Advanced Materials · doi:10.1002/adma.201502449 · Cited by 704
Self-citationElectrochemical Properties of Monoclinic NaMnO2
Ma, X., Chen, H., & Ceder, G. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.035112jes · Cited by 674
Li, Y., Lu, Y., Zhao, C., Hu, Y.-S., Titirici, M.-M., Li, H., Huang, X., & Chen, L. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.002 · Cited by 642
Self-citationβ-NaMnO 2 : A High-Performance Cathode for Sodium-Ion Batteries
Billaud, J. M., Clément, R. J., Armstrong, A. R., Canales‐Vázquez, J., Rozier, P., Grey, C. P., & Bruce, P. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509704t · Cited by 422
Electrochemistry and Solid‐State Chemistry of NaMeO2 (Me = 3d Transition Metals)
Kubota, K., Kumakura, S., Yoda, Y., Kuroki, K., & Komaba, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703415 · Cited by 399
Sun, Y., Guo, S., & Zhou, H. (2019) · Energy & Environmental Science · doi:10.1039/c8ee01006d · Cited by 322
Electrochemical Properties of Monoclinic NaNiO2
Vassilaras, P., Ma, X., Li, X., & Ceder, G. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.023302jes · Cited by 316
Hwang, J., Oh, S.-M., Myung, S., Chung, K. Y., Belharouak, I., & Sun, Y. (2015) · Nature Communications · doi:10.1038/ncomms7865 · Cited by 306
A Honeycomb‐Layered Na3Ni2SbO6: A High‐Rate and Cycle‐Stable Cathode for Sodium‐Ion Batteries
Yuan, D., Liang, X., Wu, L., Cao, Y., Ai, X., Feng, J., & Yang, H. (2014) · Advanced Materials · doi:10.1002/adma.201401946 · Cited by 295
Anionic Redox Activity in a Newly Zn‐Doped Sodium Layered Oxide P2‐Na2/3Mn1−yZnyO2 (0 < y < 0.23)
Bai, X., Sathiya, M., Mendoza‐Sánchez, B., Iadecola, A., Vergnet, J., Dedryvère, R., Saubanère, M., Abakumov, A. M., Rozier, P., & Tarascon, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802379 · Cited by 287
NaxVO2 as possible electrode for Na-ion batteries
Hamani, D., Ati, M., Tarascon, J.-M., & Rozier, P. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.06.005 · Cited by 247
Sathiya, M., Jacquet, Q., Doublet, M., Karakulina, O. M., Hadermann, J., & Tarascon, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702599 · Cited by 240
High Capacity O3-Type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O2 Cathode for Sodium Ion Batteries
Oh, S.-M., Myung, S.-T., Hwang, J.-Y., Scrosati, B., Amine, K., & Sun, Y.-K. (2014) · Chemistry of Materials · doi:10.1021/cm502481b · Cited by 237
Perez, A. J., Batuk, D., Saubanère, M., Rousse, G., Foix, D., McCalla, E., Berg, E. J., Dugas, R., H. W. van den Bos, K., Doublet, M.-L., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03338 · Cited by 193
Wang, H., Liao, X.-Z., Yang, Y., Yan, X., He, Y.-S., & Ma, Z.-F. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0011605jes · Cited by 185
Von Lithium‐ zu Natriumionenbatterien: Vorteile, Herausforderungen und Überraschendes
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2017) · Angewandte Chemie · doi:10.1002/ange.201703772 · Cited by 151
Ti Substitution Facilitating Oxygen Oxidation in Na2/3Mg1/3Ti1/6Mn1/2O2 Cathode
Zhao, C., Yao, Z., Wang, J., Lu, Y., Bai, X., Aspuru‐Guzik, A., Chen, L., & Hu, Y. (2019) · Chem · doi:10.1016/j.chempr.2019.08.003 · Cited by 137
Self-citationMulti-electron reaction materials for sodium-based batteries
Wu, F., Zhao, C., Chen, S., Lu, Y., Hou, Y., Hu, Y., Maier, J., & Yu, Y. M. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.004 · Cited by 136
Self-citationZhao, C., Lu, Y., Chen, L., & Hu, Y. (2019) · InfoMat · doi:10.1002/inf2.12027 · Cited by 125
Self-citationBhange, D. S., Ali, G., Kim, D.-H., Anang, D. A., Shin, T. J., Kim, M. G., Kang, Y., Chung, K. Y., & Nam, K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08661f · Cited by 79
Na2Mn3+0.3Mn4+2.7O6.85: A cathode with simultaneous cationic and anionic redox in Na-ion battery
Wang, Q., Yang, W., Kang, F., & Li, B. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.06.003 · Cited by 48
Cited by
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
Self-citationHigh-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
High-entropy energy materials: challenges and new opportunities
Ma, Y., Ma, Y., Wang, Q., Schweidler, S., Botros, M., Fu, T., Hahn, H., Brezesinski, T., & Breitung, B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00505g · Cited by 963
Compositionally complex doping for zero-strain zero-cobalt layered cathodes
Zhang, R., Wang, C., Zou, P., Lin, R., Ma, L., Yin, L., Li, T., Xu, W., Jia, H., Li, Q., et al. (2022) · Nature · doi:10.1038/s41586-022-05115-z · Cited by 785
Cation-disordered rocksalt-type high-entropy cathodes for Li-ion batteries
Lun, Z., Ouyang, B., Kwon, D.-H., Ha, Y., Foley, E. E., Huang, T.-Y., Cai, Z., Kim, H., Balasubramanian, M., Sun, Y., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00816-0 · Cited by 689
Metadata
- Authors
- Zhao, C., Ding, F., Lu, Y., Chen, L., & Hu, Y.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2019-11-19
- Volume
- 59
- Issue
- 1
- Pages
- 264-269
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2991246762
- Cited by
- 771
- References
- 31
- FWCI
- 16.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.