The DOI matches its Crossref record; 162 of the 174 references it cites were found in a registry or an index.
Beyond Mechanical Recycling: Giving New Life to Plastic Waste
Open accessAbstract
Increasing the stream of recycled plastic necessitates an approach beyond the traditional recycling via melting and re‐extrusion. Various chemical recycling processes have great potential to enhance recycling rates. In this Review, a summary of the various chemical recycling routes and assessment via life‐cycle analysis is complemented by an extensive list of processes developed by companies active in chemical recycling. We show that each of the currently available processes is applicable for specific plastic waste streams. Thus, only a combination of different technologies can address the plastic waste problem. Research should focus on more realistic, more contaminated and mixed waste streams, while collection and sorting infrastructure will need to be improved, that is, by stricter regulation. This Review aims to inspire both science and innovation for the production of higher value and quality products from plastic recycling suitable for reuse or valorization to create the necessary economic and environmental push for a circular economy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“desirable re-utilisation of post-consumer sorted polymers ('mechanical recycling') is hampered by deterioration of materials performance.”
From Closed-loop recycling of polyethylene-like materials (2021) · cites this paper as [1]
In the citing paper
“During the carbonization process, polypropylene undergoes random cleavage of C-C bonds to form oligomers, which then undergoes β-Cracking to further decomposes into small molecules such as hydrogen, methane, and propylene, which are then catalyzed and carbonized to form carbon nanotubes, graphene, and carbon spheres (Vollmer et al. 2020).”
From Conversion of waste plastics into value-added carbon materials (2023) · cites this paper as Vollmer et al. 2020
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016) · Science · doi:10.1126/science.aad6359 · Cited by 3,367
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Room temperature ionic liquids as novel media for ‘clean’ liquid–liquid extraction
Huddleston, J. G., Willauer, H. D., Swatloski, R. P., Visser, A. E., & Rogers, R. D. (1998) · Chemical Communications · doi:10.1039/a803999b · Cited by 2,169
Chemical recycling of waste plastics for new materials production
Rahimi, A., & Garcı́a, J. M. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0046 · Cited by 2,148
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Current opinion: What is a nanoplastic?
Gigault, J., Halle, A. T., Baudrimont, M., Pascal, P.-Y., Gauffre, F., Phi, T.-L., El Hadri, H., Grassl, B., & Reynaud, S. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.01.024 · Cited by 2,010
Mechanochemistry: A Force of Synthesis
Do, J., & Friščić, T. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00277 · Cited by 1,500
Lei, Z., Chen, B., Koo, Y.-M., & MacFarlane, D. R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00246 · Cited by 1,492
Mechanically-Induced Chemical Changes in Polymeric Materials
Caruso, M. M., Davis, D. A., Shen, Q., Odom, S. A., Sottos, N. R., White, S. R., & Moore, J. S. (2009) · Chemical Reviews · doi:10.1021/cr9001353 · Cited by 1,387
Mechanochemistry for Synthesis
Friščić, T., Mottillo, C., & Titi, H. M. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201906755 · Cited by 1,145
Characterization and engineering of a plastic-degrading aromatic polyesterase
Austin, H. P., Allen, M. D., Donohoe, B. S., Rorrer, N. A., Kearns, F. L., Silveira, R. L., Pollard, B. C., Dominick, G., Duman, R., Omari, K. E., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1718804115 · Cited by 1,124
Microbial enzymes for the recycling of recalcitrant petroleum‐based plastics: how far are we?
Wei, R., & Zimmermann, W. (2017) · Microbial Biotechnology · doi:10.1111/1751-7915.12710 · Cited by 902
Pet Waste Management by Chemical Recycling: A Review
Sinha, V., Patel, M. R., & Patel, J. V. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0106-7 · Cited by 900
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
The historical development of mechanochemistry
Takács, L. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35442j · Cited by 809
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Zia, K. M., Bhatti, H. N., & Ahmad Bhatti, I. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.05.004 · Cited by 786
Photoreforming of Nonrecyclable Plastic Waste over a Carbon Nitride/Nickel Phosphide Catalyst
Uekert, T., Kasap, H., & Reisner, E. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b06872 · Cited by 705
Müller, R., Schrader, H., Profe, J., Dresler, K., & Deckwer, W. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200500410 · Cited by 671
Nalawade, S. P., Picchioni, F., & Janssen, L. P. B. M. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.08.002 · Cited by 668
Wilkes, R. A., & Aristilde, L. (2017) · Journal of Applied Microbiology · doi:10.1111/jam.13472 · Cited by 627
Degradation of plastics and plastic-degrading bacteria in cold marine habitats
Urbanek, A. K., Rymowicz, W., & Mirończuk, A. M. (2018) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-9195-y · Cited by 619
Kawai, F., Kawabata, T., & Oda, M. (2019) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-019-09717-y · Cited by 608
Plastic waste as a feedstock for solar-driven H 2 generation
Uekert, T., Kuehnel, M. F., Wakerley, D., & Reisner, E. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01408f · Cited by 588
Greener routes for recycling of polyethylene terephthalate
Al-Sabagh, A. M., Yehia, F. Z., Eshaq, G., Rabie, A. M., & ElMetwally, A. E. (2015) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2015.03.001 · Cited by 571
Upcycling Single-Use Polyethylene into High-Quality Liquid Products
Celik, G., Kennedy, R. M., Hackler, R. A., Ferrandon, M. S., Tennakoon, A., Patnaik, S., LaPointe, A. M., Ammal, S. C., Heyden, A., Perras, F. A., et al. (2019) · ACS Central Science · doi:10.1021/acscentsci.9b00722 · Cited by 562
Raheem, A. B., Noor, Z. Z., Hassan, A., Hamid, M. K. A., Samsudin, S. A., & Sabeen, A. H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.019 · Cited by 515
A review on tertiary recycling of high-density polyethylene to fuel
Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 496
Feedstock Recycling and Pyrolysis of Waste Plastics
Scheirs, J., & Kaminsky, W. (2006) · Wiley eBooks · doi:10.1002/0470021543 · Cited by 495
Serrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 471
Mechanochemistry: the varied applications of mechanical bond-breaking
Kaupp, G. (2008) · CrystEngComm · doi:10.1039/b810822f · Cited by 457
Quality concepts for the improved use of recycled polymeric materials: a review
Vilaplana, F., & Karlsson, S. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700393 · Cited by 414
Recycling of polyurethanes from laboratory to industry, a journey towards the sustainability
Simón, D., Borreguero, A. M., de Lucas, A., & Rodríguez, J. F. (2018) · Waste Management · doi:10.1016/j.wasman.2018.03.041 · Cited by 405
Solvent-based separation and recycling of waste plastics: A review
Zhao, Y., Lv, X., & Ni, H. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.06.095 · Cited by 393
Chemical Recycling of Poly(ethylene terephthalate)
Karayannidis, G. P., & Achilias, D. S. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600341 · Cited by 378
Polymer mechanochemistry: techniques to generate molecular force via elongational flows
May, P. A., & Moore, J. S. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35463b · Cited by 352
Mastral, J. F., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 348
Emerging catalytic processes for the production of adipic acid
de Vyver, S. V., & Román‐Leshkov, Y. (2013) · Catalysis Science & Technology · doi:10.1039/c3cy20728e · Cited by 345
Chemical recycling of plastics using sub- and supercritical fluids
Goto, M. (2008) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.10.011 · Cited by 343
Sharma, B. K., Moser, B. R., Vermillion, K. E., Doll, K. M., & Rajagopalan, N. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.01.019 · Cited by 341
Organocatalysis for depolymerisation
Jehanno, C., Pérez‐Madrigal, M. M., Demarteau, J., Sardón, H., & Dove, A. P. (2018) · Polymer Chemistry · doi:10.1039/c8py01284a · Cited by 337
Upcycling waste plastics into carbon nanomaterials: A review
Zhuo, C., & Levendis, Y. A. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39931 · Cited by 335
Combining Reclaimed PET with Bio-based Monomers Enables Plastics Upcycling
Rorrer, N. A., Nicholson, S., Carpenter, A. C., Biddy, M. J., Grundl, N. J., & Beckham, G. T. (2019) · Joule · doi:10.1016/j.joule.2019.01.018 · Cited by 333
The Degradation of Poly(ethylene terephthalate)
Buxbaum, L. H. (1968) · Angewandte Chemie International Edition in English · doi:10.1002/anie.196801821 · Cited by 325
C−H Functionalization of Commodity Polymers
Alty, J. W., Lewis, S. E., Johnson, R. R., Manning, I. M., & Leibfarth, F. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201810970 · Cited by 323
Green materials synthesis with supercritical water
Adschiri, T., Lee, Y.-W., Goto, M., & Takami, S. (2011) · Green Chemistry · doi:10.1039/c1gc15158d · Cited by 315
Imran, M., Kim, D. H., Al‐Masry, W. A., Mahmood, A., Hassan, A., Haider, S., & Ramay, S. M. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.01.007 · Cited by 302
Depolymerization of poly(ethylene terephthalate) recycled from post‐consumer soft‐drink bottles
Baliga, S., & Wong, W. T. (1989) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.1989.080270625 · Cited by 298
Kinetics of catalytic glycolysis of PET wastes with sodium carbonate
López‐Fonseca, R., Duque‐Ingunza, I., de Rivas, B., Flores-Giraldo, L., & Gutiérrez-Ortiz, J. I. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.01.031 · Cited by 293
Mechanochemistry for Synthesis
Friščić, T., Mottillo, C., & Titi, H. M. (2019) · Angewandte Chemie · doi:10.1002/ange.201906755 · Cited by 293
Álvarez-Barragán, J., Domínguez-Malfavón, L., Vargas‐Suárez, M., González-Hernández, R. A., Aguilar‐Osorio, G., & Loza‐Tavera, H. (2016) · Applied and Environmental Microbiology · doi:10.1128/aem.01344-16 · Cited by 285
Wang, Q., Yao, X., Geng, Y., Zhou, Q., Lü, X., & Zhang, S. (2015) · Green Chemistry · doi:10.1039/c4gc02401j · Cited by 273
Mechanical reprocessing of polyolefin waste: A review
Yin, S. P., Tuladhar, R., Shi, F., Shanks, R. A., Combe, M., & Collister, T. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24182 · Cited by 261
Organocatalytic depolymerization of poly(ethylene terephthalate)
Fukushima, K., Coulembier, O., Lecuyer, J. M., Al‐Megren, H. A., Alabdulrahman, A. M., Alsewailem, F. D., McNeil, M., Dúbois, P., Waymouth, R. M., Horn, H. W., et al. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24551 · Cited by 257
Degradation of poly(ethylene terephthalate) using ionic liquids
Wang, H., Li, Z., Liu, Y., Zhang, X., & Zhang, S. (2009) · Green Chemistry · doi:10.1039/b906831g · Cited by 239
Ionic liquids in Green Chemistry
Welton, T. (2011) · Green Chemistry · doi:10.1039/c0gc90047h · Cited by 238
Evaluation of pyrolysis process parameters on polypropylene degradation products
Abbas‐Abadi, M. S., Nekoomanesh, M., Yeganeh, H., & McDonald, A. G. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.023 · Cited by 235
Seo, Y., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 234
Shieh, P., Nguyen, H. V.-T., & Johnson, J. A. (2019) · Nature Chemistry · doi:10.1038/s41557-019-0352-4 · Cited by 233
Bockhorn, H., Hornung, A., & Hornung, U. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00026-1 · Cited by 231
A review of mechanochemistry applications in waste management
Guo, X., Xiang, D., Duan, G., & Mou, P. (2009) · Waste Management · doi:10.1016/j.wasman.2009.08.017 · Cited by 230
Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor
Artetxe, M., López, G., Amutio, M., Barbarias, I., Arregi, A., Aguado, R., Bilbao, J., & Olazar, M. (2015) · Waste Management · doi:10.1016/j.wasman.2015.05.034 · Cited by 225
Life Cycle Assessment of an Ionic Liquid versus Molecular Solvents and Their Applications
Zhang, Y., Bakshi, B. R., & Demessie, E. S. (2008) · Environmental Science & Technology · doi:10.1021/es0713983 · Cited by 209
Recycling of biopolymers – The patent perspective
Niaounakis, M. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.027 · Cited by 208
Glycolysis of Poly(ethylene terephthalate) Catalyzed by the Lewis Base Ionic Liquid [Bmim][OAc]
Al-Sabagh, A. M., Yehia, F. Z., Eissa, A.-M. M. F., Moustafa, M. E., Eshaq, G., Rabie, A. M., & ElMetwally, A. E. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503677w · Cited by 204
Sohma, J. (1989) · Progress in Polymer Science · doi:10.1016/0079-6700(89)90004-x · Cited by 201
Pyrolysis of poly(ethylene terephthalate) in a fluidised bed plant
Yoshioka, T., Grause, G., Eger, C., Kaminsky, W., & Okuwaki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.06.001 · Cited by 194
Light olefins from HDPE cracking in a two-step thermal and catalytic process
Artetxe, M., López, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.105 · Cited by 191
Özsin, G., & Pütün, A. E. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.059 · Cited by 190
Achilias, D. S., Giannoulis, A., & Papageorgiou, G. Z. (2009) · Polymer Bulletin · doi:10.1007/s00289-009-0104-5 · Cited by 179
PMBD: a Comprehensive Plastics Microbial Biodegradation Database
Gan, Z., & Zhang, H. (2019) · Database · doi:10.1093/database/baz119 · Cited by 177
One-step in situ ball milling synthesis of polymer-functionalized graphene nanocomposites
Wu, H., Zhao, W., Hu, H., & Chen, G. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10819k · Cited by 175
Ultrasound-assisted dissolution of cellulose in ionic liquid
Lan, W., Liu, C., Yue, F., Sun, R., & Kennedy, J. F. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.05.013 · Cited by 167
Zhou, L., Lü, X., Ju, Z., Лю, Б., Yao, H., Xu, J., Zhou, Q., Hu, Y., & Zhang, S. (2019) · Green Chemistry · doi:10.1039/c8gc03791d · Cited by 167
Pyrolysis of waste feedstocks in CO2 for effective energy recovery and waste treatment
Kwon, E. E., Kim, S., & Lee, J. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.03.015 · Cited by 167
Ueno, T., Nakashima, E., & Takeda, K. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.04.020 · Cited by 164
Ding, W., Liang, J., & Anderson, L. L. (1997) · Energy & Fuels · doi:10.1021/ef970051q · Cited by 157
Pyrolysis kinetics of waste PVC pipe
Kim, S. (2001) · Waste Management · doi:10.1016/s0956-053x(00)00127-6 · Cited by 150
Monomer recovery by pyrolysis of poly(methyl methacrylate) (PMMA)
Kaminsky, W., & Franck, J. (1991) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(91)80052-a · Cited by 149
Catalytic cracking reactions of polyethylene to light alkanes
Adams, C. J., Earle, M. J., & Seddon, K. R. (2000) · Green Chemistry · doi:10.1039/a908167d · Cited by 145
Amelio, A., Genduso, G., Vreysen, S., Luis, P., & der Bruggen, B. V. (2014) · Green Chemistry · doi:10.1039/c3gc42513d · Cited by 140
The selective dissolution/precipitation technique for polymer recycling: a pilot unit application
Pappa, G. D., Boukouvalas, C. J., Giannaris, C., Ntaras, N., Zografos, V., Magoulas, K. G., Lygeros, A. I., & Tassios, D. P. (2001) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(01)00092-1 · Cited by 139
Reactions of polymers in supercritical fluids for chemical recycling of waste plastics
Goto, M., Sasaki, M., & Hirose, T. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-4615-2 · Cited by 134
Investigation of solid catalysts for glycolysis of polyethylene terephthalate
Zhu, M., Li, S. C., Li, Z., Lü, X., & Zhang, S. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.068 · Cited by 129
Biodiesel production in a novel continuous flow microwave reactor
Choedkiatsakul, I., Ngaosuwan, K., Assabumrungrat, S., Mantegna, S., & Cravotto, G. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.04.012 · Cited by 128
Park, G., Bartolome, L., Lee, K. G., Lee, S. J., Kim, D. H., & Park, T. J. (2012) · Nanoscale · doi:10.1039/c2nr30168g · Cited by 125
The Closure of the Cycle: Enzymatic Synthesis and Functionalization of Bio-Based Polyesters
Pellis, A., Acero, E. H., Ferrario, V., Ribitsch, D., Guebitz, G. M., & Gardossi, L. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2015.12.009 · Cited by 124
Glycolytic depolymerization of PET waste in a microwave reactor
Achilias, D. S., Redhwi, H. H., Siddiqui, M. N., Nikolaidis, A. K., Bikiaris, D. Ν., & Karayannidis, G. P. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32737 · Cited by 118
Kinetic study of the thermal decomposition of polypropylene, oil shale, and their mixture
Gersten, J. (2000) · Fuel · doi:10.1016/s0016-2361(00)00002-8 · Cited by 115
Depolymerization of polyamide 6 in hydrophilic ionic liquids
Kamimura, A., Shiramatsu, Y., & Kawamoto, T. (2019) · Green Energy & Environment · doi:10.1016/j.gee.2019.01.002 · Cited by 110
Upcycling aromatic polymers through C–H fluoroalkylation
Lewis, S. E., Wilhelmy, B. E., & Leibfarth, F. A. (2019) · Chemical Science · doi:10.1039/c9sc01425j · Cited by 109
Biomass valorisation by staged degasification
de Wild, P. J., den Uil, H., Reith, J. H., Kiel, J. H. A., & Heeres, H. J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.08.008 · Cited by 108
Dodbiba, G., Takahashi, K., SADAKI, J., & Fujita, T. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.08.029 · Cited by 107
Retrieving and converting energy from polymers: deployable technologies and emerging concepts
Baytekin, B., Baytekin, H. T., & Grzybowski, B. A. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41360h · Cited by 105
Estimation of Mechanochemical Dechlorination Rate of Poly(vinyl chloride)
Mio, H., Saeki, S., Kano, J., & Saito, F. (2002) · Environmental Science & Technology · doi:10.1021/es0106220 · Cited by 102
Tailoring Hydrocarbon Polymers and All‐Hydrocarbon Composites for Circular Economy
Hees, T., Zhong, F., Stürzel, M., & Mülhaupt, R. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800608 · Cited by 100
Designed from Recycled: Turning Polyethylene Waste to Covalently Attached Polylactide Plasticizers
Bäckström, E., Odelius, K., & Hakkarainen, M. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02092 · Cited by 100
Modeling fast biomass pyrolysis in a gas–solid vortex reactor
Ashcraft, R. W., Heynderickx, G. J., & Marin, G. B. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.048 · Cited by 99
Metal-Oxide-Doped Silica Nanoparticles for the Catalytic Glycolysis of Polyethylene Terephthalate
Imran, M., Lee, K., Imtiaz, Q., Kim, B., Han, M., Cho, B. G., & Kim, D. H. (2011) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2011.3201 · Cited by 98
Adnan, A., Shah, J., & Jan, M. R. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.01.015 · Cited by 95
A study of some thermal and mechanical properties of HDPE blend with marble and granite dust
Awad, A. H., El-Wahab, A. A. A., El-Gamasy, R., & Abdellatif, M. H. (2019) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2018.08.005 · Cited by 91
Application of switchable hydrophilicity solvents for recycling multilayer packaging materials
Samorì, C., Cespi, D., Blair, P., Galletti, P., Malferrari, D., Passarini, F., Vassura, I., & Tagliavini, E. (2017) · Green Chemistry · doi:10.1039/c6gc03535c · Cited by 87
Amorphous Carbon Chips Li-Ion Battery Anodes Produced through Polyethylene Waste Upcycling
Villagómez-Salas, S., Palanisamy, M., Acuña-Guzman, S. F., & Pol, V. G. (2018) · ACS Omega · doi:10.1021/acsomega.8b02290 · Cited by 84
Depolymerization of Polypropylene in an Induction-Coupled Plasma (ICP) Reactor
Guddeti, R. R., Knight, R., & Grossmann, E. D. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9906868 · Cited by 79
Chauhan, R., Gopinath, S., Razdan, P., Delattre, C., Nirmala, G., & Natarajan, R. (2007) · Waste Management · doi:10.1016/j.wasman.2007.10.001 · Cited by 75
Lovett, S., Berruti, F., & Behie, L. A. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970109o · Cited by 72
Method for Efficient Recovery of High-Purity Polycarbonates from Electronic Waste
Weeden, G. S., Soepriatna, N. H., & Wang, N. L. (2015) · Environmental Science & Technology · doi:10.1021/es5055786 · Cited by 72
Kim, P. J., Fontecha, H. D., Kim, K., & Pol, V. G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03959 · Cited by 71
Supercritical Secondary Alcohols as Useful Media To Convert Polyamide into Monomeric Lactams
Kamimura, A., Oishi, Y., Kaiso, K., Sugimoto, T., & Kashiwagi, K. (2007) · ChemSusChem · doi:10.1002/cssc.200700024 · Cited by 69
Simón, D., Borreguero, A. M., de Lucas, A., & Rodríguez, J. F. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.09.001 · Cited by 66
New bio-based monomers: tuneable polyester properties using branched diols from biomass
Arnaud, S. P., Wu, L., Chang, M. W., Comerford, J. W., Farmer, T. J., Schmid, M., Chang, F., Li, Z., & Mascal, M. (2017) · Faraday Discussions · doi:10.1039/c7fd00057j · Cited by 61
Der Abbau von Polyäthylenterephthalat
Buxbaum, L. H. (1968) · Angewandte Chemie · doi:10.1002/ange.19680800604 · Cited by 59
Rapid microwave induced depolymerization of polyamide-6
Klun, U. (2000) · Polymer · doi:10.1016/s0032-3861(99)00658-8 · Cited by 58
Polyurethane waste recycling. 1. Glycolysis and hydroglycolysis of water-blown foams
Gerlock, J. L., Braslaw, J., & Zinbo, M. (1984) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200026a023 · Cited by 56
Microwave‐assisted depolymerization of poly(ethylene terephthalate) [PET] at atmospheric pressure
Nikje, M. M. A., & Nazari, F. (2006) · Advances in Polymer Technology · doi:10.1002/adv.20080 · Cited by 56
Lee, J., Lee, T., Tsang, Y. F., Oh, J.-I., & Kwon, E. E. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.026 · Cited by 56
Reactive‐extrusion route for the closed‐loop recycling of poly(ethylene terephthalate)
Kiliaris, P., Papaspyrides, C. D., & Pfaendner, R. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25795 · Cited by 53
Panahi, A., Wei, Z., Song, G., & Levendis, Y. A. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b05770 · Cited by 53
Benaskar, F., Ben-Abdelmoumen, A., Patil, N. G., Rebrov, E. V., Meuldijk, J., Hulshof, L. A., Hessel, V., Krtschil, U., & Schouten, J. C. (2011) · Journal of Flow Chemistry · doi:10.1556/jfchem.2011.00015 · Cited by 52
Westerhout, R. W. J., Waanders, J., Kuipers, J. A. M., & Swaaij, W. P. M. V. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970703y · Cited by 52
Direct conversion of polyamides to ω-hydroxyalkanoic acid derivatives by using supercritical MeOH
Kamimura, A., Kaiso, K., Suzuki, S., Oishi, Y., Ohara, Y., Sugimoto, T., Kashiwagi, K., & Yoshimoto, M. (2011) · Green Chemistry · doi:10.1039/c1gc15172j · Cited by 50
Hydrolytic depolymerization of poly(ethylene terephthalate) under microwave irradiation
Liu, L., Zhang, D., An, L., Zhang, H., & Tian, Y. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21231 · Cited by 49
Said, A. B., Guinot, C., Ruiz, J.-C., Charton, F., Dole, P., Joly, C., & Chalamet, Y. (2015) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2014.12.022 · Cited by 48
Halley, P. J., & George, G. A. (2009) · Cambridge University Press eBooks · doi:10.1017/cbo9780511581403 · Cited by 47
Valandro, S. R., Lombardo, P. C., Poli, A. L., Horn, M. A., Jr., Neumann, M. G., & Schmitt, C. C. (2013) · Materials Research · doi:10.1590/s1516-14392013005000173 · Cited by 45
Ball Mill-Assisted Dechlorination of Flexible and Rigid Poly(vinyl chloride) in NaOH/EG Solution
Kameda, T., Ono, M., Grause, G., Mizoguchi, T., & Yoshioka, T. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8006819 · Cited by 44
Choi, S., & Choi, H. (2019) · Fibers and Polymers · doi:10.1007/s12221-019-8931-y · Cited by 43
Liquefaction process for a hydrothermally treated waste mixture containing plastics
Sugano, M., Komatsu, A., Yamamoto, M., Kumagai, M., Shimizu, T., Hirano, K., & Mashimo, K. (2009) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-008-0215-3 · Cited by 41
Grause, G., Fonseca, J. D., Tanaka, H., Bhaskar, T., Kameda, T., & Yoshioka, T. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.12.017 · Cited by 41
Nanocrystalline ZSM-5: a highly active catalyst for polyolefin feedstock recycling
Serrano, D. P., Aguado, J., Escola, J. M., & Rodríguez, J. (2002) · Studies in surface science and catalysis · doi:10.1016/s0167-2991(02)80014-3 · Cited by 39
Combination of Mechanochemical Degradation of Polymers with Controlled Free-Radical Polymerization
Schmidt‐Naake, G., Drache, M., & Weber, M. (2002) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(200211)203:15 · Cited by 39
C‐H‐Funktionalisierung von Standardpolymeren
Williamson, J. B., Lewis, S. E., Johnson, R. R., Manning, I. M., & Leibfarth, F. A. (2018) · Angewandte Chemie · doi:10.1002/ange.201810970 · Cited by 39
Synthesis of Oligoester α,ω‐diols by Alcoholysis of PET through the Reactive Extrusion Process
Michel, A., Cassagnau, P., & Dannoux, M. (2002) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450800609 · Cited by 38
Encouragements for the Use of Microwaves in Industrial Chemistry
Nagahata, R., & Takeuchi, K. (2018) · The Chemical Record · doi:10.1002/tcr.201800064 · Cited by 38
Separation and Recovery of Nylon from Carpet Waste Using a Supercritical Fluid Antisolvent Technique
Griffith, A. T., Park, Y., & Roberts, C. B. (1999) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559909351590 · Cited by 35
Lee, T., Lee, J., Ok, Y. S., Oh, J.-I., Lee, S., Rinklebe, J., & Kwon, E. E. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.181 · Cited by 35
Choi, D., Yeo, J., Joh, H., & Lee, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03066 · Cited by 35
Pan, Y., Castillo‐Rodríguez, M., & Wang, D. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.09.040 · Cited by 34
Arends, D., Schlummer, M., & Mäurer, A. (2012) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-012-0041-5 · Cited by 33
Kurek, A., Mark, S., Enders, M., Stürzel, M., & Mülhaupt, R. (2013) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2013.11.020 · Cited by 33
Said, A. B., Guinot, C., Ruiz, J.-C., Grandjean, A., Dole, P., Joly, C., & Chalamet, Y. (2015) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2015.12.010 · Cited by 29
Lateef, H., Grimes, S. M., Morton, R., & Mehta, L. K. (2008) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1829 · Cited by 26
Polyurethane Foam Wastes Recycling under Microwave Irradiation
Nikje, M. M. A., & Mohammadi, F. (2010) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602551003749635 · Cited by 23
Sharma, V., Shrivastava, P., & Agarwal, D. D. (2015) · Journal of Polymer Research · doi:10.1007/s10965-015-0884-2 · Cited by 22
The Challenges and Opportunities of Contemporary Polymer Mechanochemistry
Boulatov, R. (2017) · ChemPhysChem · doi:10.1002/cphc.201700127 · Cited by 22
Recycling of Postindustrial and Postconsumer Plastics Containing Flame Retardants
Schlummer, M. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-53808-6.00025-1 · Cited by 20
Chapter 1. A New Perspective on a Global Circular Economy
Velenturf, A. P. M., Purnell, P. J., Macaskie, L. E., Mayes, W. M., & Sapsford, D. J. (2019) · RSC green chemistry series · doi:10.1039/9781788016353-00001 · Cited by 20
Effective Depolymerization of Nylon-6 in Wet Supercritical Hydrocarbons
Kaiso, K., Sugimoto, T., Kashiwagi, K., & Kamimura, A. (2011) · Chemistry Letters · doi:10.1246/cl.2011.370 · Cited by 19
Benaskar, F., Patil, N. G., Rebrov, E. V., Ben-Abdelmoumen, A., Meuldijk, J., Hulshof, L. A., Hessel, V., & Schouten, J. C. (2012) · ChemSusChem · doi:10.1002/cssc.201200504 · Cited by 19
Peng, S., Liang, S., & Yu, M. (2012) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2012.10.046 · Cited by 18
Lehtimäki, E., & Vaisanen, A. O. (2016) · Spectrochimica Acta Part B Atomic Spectroscopy · doi:10.1016/j.sab.2016.11.011 · Cited by 18
Solid Acid/Base Catalysis in Sub- and Supercritical Water
Akizuki, M., & Oshima, Y. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00753 · Cited by 18
Process Analysis of Controllable Polycarbonate Depolymerization in Ethylene Glycol
Li, B., Xue, F., Wang, J., Ding, E., & Li, Z. (2017) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/147776061703300103 · Cited by 16
Microwave-Mediated Biofuel Production
Gude, V. G. (2017) · CRC Press eBooks · doi:10.1201/9781315151892 · Cited by 15
Carbon Nanotubes as a Resourceful Product Derived from Waste Plastic—A Review
Mukherjee, A., Debnath, B., & Ghosh, S. K. (2018) · Springer eBooks · doi:10.1007/978-981-10-7290-1_77 · Cited by 15
Guo, P., Wang, W., Dai, S., Shen, S., Zhang, W., Lian, Y., & Dou, H. (2019) · Microchemical Journal · doi:10.1016/j.microc.2019.104092 · Cited by 15
Kemmere, M. F., van Schilt, M. A., Cleven, M., van Herk, A. M., & Keurentjes, J. T. F. (2002) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0109408 · Cited by 14
Self-citationFirst and Second Generation Production of Bio‐Adipic Acid
van Duuren, J. B. J. H., & Wittmann, C. (2014) · Wiley eBooks · doi:10.1002/9781118845394.ch19 · Cited by 13
May, P. A., & Moore, J. S. (2013) · ChemInform · doi:10.1002/chin.201344242 · Cited by 11
Mendes, L. C., & Pereira, P. S. D. C. (2011) · Materials Sciences and Applications · doi:10.4236/msa.2011.28140 · Cited by 7
Glycolysis process for polyurethane waste recycling.
Herrero, D. S. (2017) · Dialnet (Universidad de la Rioja) · Cited by 5
SABIC customers to use circular polymers from low-quality, mixed plastic waste
(2019) · Focus on Surfactants · doi:10.1016/j.fos.2019.03.058 · Cited by 3
Flagged first, then by citations
12 of the 174 references couldn’t be matched to a known paper.
Research works printed but not linked: 14
- “BP′s new technology to enable circularity for unrecyclable PET plastic waste ” can be found underhttps://www.bp.com/en/global/corporate/news-and-insights/press-releases/bp-new-technology-to-enable-circularity-for-unrecyclable-pet-plastic-waste.html 2019.
- M. Schlummer F. Wolff A. Maurer in2016 Electron. Goes Green 2016+ EGG 2016 IEEE 2017 pp. 1–6. · DOI
- Maase M., 2005, Ion. Liq. IIIB Fundam. Progress, Challenges, Oppor., 126
- Maase M., 2008, Ion. Liq. Synth.
- Kolbert A. C., 1997, Am. Chem. Soc. Polym. Prepr. Div. Polym. Chem., 38, 819
- 10.1007/s10924-008-0106-7 · DOI
- Behrendt G., 2009, J. Univ. Chem. Technol. Metall., 44, 3
- Bartolome L., 2012, Mater. Recycl. Trends Perspect./ Monogr., 406
- Mohsin M. A., 2017, Int. J. Chem. Eng.
- Gutiérrez C., 2012, J. Mater. Cycles Waste Manage., 14, 308
- Prawisudha P., 2011, J. Environ. Sci. Eng., 5, 432
- Kaminsky W., 2016, Macromol. Symp., 10
- Prasad N., 2018, IEEE J. Sel. Top. Quantum Electron., 25, 363
- Akah A., 2015, Chem. Eng. Trans., 43, 2395
Cited by
Sorted by citations
Mechanical Recycling of Packaging Plastics: A Review
Schyns, Z. O. G., & Shaver, M. P. (2020) · Macromolecular Rapid Communications · doi:10.1002/marc.202000415 · Cited by 1,815
Critical advances and future opportunities in upcycling commodity polymers
Jehanno, C., Alty, J. W., Roosen, M., Meester, S. D., Dove, A. P., Chen, E. Y. ‐., Leibfarth, F. A., & Sardón, H. (2022) · Nature · doi:10.1038/s41586-021-04350-0 · Cited by 1,375
Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization
Zhang, F., Zeng, M., Yappert, R. D., Sun, J., Lee, Y.-H., LaPointe, A. M., Peters, B., Abu-Omar, M. M., & Scott, S. L. (2020) · Science · doi:10.1126/science.abc5441 · Cited by 882
Plastic waste and its management strategies for environmental sustainability
Evode, N., Qamar, S. A., Bilal, M., Barceló, D., & Iqbal, H. M. N. (2021) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2021.100142 · Cited by 800
Closed-loop recycling of polyethylene-like materials
Häußler, M., Eck, M., Rothauer, D., & Mecking, S. (2021) · Nature · doi:10.1038/s41586-020-03149-9 · Cited by 753
Metadata
- Authors
- Vollmer, I., Jenks, M. J. F., Roelands, M. C. P., White, R. J., van Harmelen, T., de Wild, P., van der Laan, G. P., Meirer, F., Keurentjes, J. T. F., & Weckhuysen, B. M.
- Affiliations
- Utrecht University (NL)
- Netherlands Organisation for Applied Scientific Research (NL)
- The Netherlands Organisation for Applied Scientific Research (TNO) Climate, Air & Sustainability Department Utrecht The Netherlands
- Energieonderzoek Centrum Nederland (ECN)- part of TNO, Biomass & Energy Efficiency Petten The Netherlands
- University of Twente (NL)
- Corresponding author
- Weckhuysen, Bert M.
- ORCID
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2020-06-25
- Volume
- 59
- Issue
- 36
- Pages
- 15402-15423
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- PMC
- PMC7497176
- OpenAlex
- W3012481340
- Cited by
- 1,905
- References
- 174
- Citations by year
- 2026: 346 · 2025: 394 · 2024: 398 · 2023: 327 · 2022: 267 · 2021: 149 · 2020: 24
- FWCI
- 11.86
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Angewandte Chemie International Edition (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- TNO Repository (submittedVersion)
- TU/e Research Portal (submittedVersion, other-oa)
- Repository hosted by TU Delft Library (TU Delft) (submittedVersion)
- Data Archiving and Networked Services (DANS) (submittedVersion)
- University of Twente Research Information (submittedVersion, cc-by)
- Funders
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (MCEC, Zwaartekracht Programma, ARC CBBC Consortium)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Physical Sciences › Environmental Science › Waste Management and Disposal › Recycling and Waste Management Techniques
- Keywords
- chemical recycling, plastic waste, plastic recycling, life cycle assessment, mechanical recycling, mixed waste streams, circular economy, plastic valorization, recycling technology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review