The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Porous, Conductive Metal‐Triazolates and Their Structural Elucidation by the Charge‐Flipping Method
Abstract
A new family of porous crystals was prepared by combining 1 H‐1,2,3‐triazole and divalent metal ions (Mg, Mn, Fe, Co, Cu, and Zn) to give six isostructural metal‐triazolates (termed MET‐1 to 6). These materials are prepared as microcrystalline powders, which give intense X‐ray diffraction lines. Without previous knowledge of the expected structure, it was possible to apply the newly developed charge‐flipping method to solve the complex crystal structure of METs: all the metal ions are octahedrally coordinated to the nitrogen atoms of triazolate such that five metal centers are joined through bridging triazolate ions to form super‐tetrahedral units that lie at the vertexes of a diamond‐type structure. The variation in the size of metal ions across the series provides for precise control of pore apertures to a fraction of an Angstrom in the range 4.5 to 6.1 Å. MET frameworks have permanent porosity and display surface areas as high as some of the most porous zeolites, with one member of this family, MET‐3, exhibiting significant electrical conductivity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
Self-citationA Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Palatinus, L., & Chapuis, G. (2007) · Journal of Applied Crystallography · doi:10.1107/s0021889807029238 · Cited by 4,299
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Self-citationSecondary building units, nets and bonding in the chemistry of metal–organic frameworks
Tranchemontagne, D. J., Mendoza-Cortés, J. L., O’Keeffe, M., & Yaghi, O. M. (2009) · Chemical Society Reviews · doi:10.1039/b817735j · Cited by 2,478
Self-citationThe pervasive chemistry of metal–organic frameworks
Long, J. R., & Yaghi, O. M. (2009) · Chemical Society Reviews · doi:10.1039/b903811f · Cited by 2,394
Self-citationMetal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325
Farha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
Powder pattern indexing with the dichotomy method
Boultif, A., & Louër, D. (2004) · Journal of Applied Crystallography · doi:10.1107/s0021889804014876 · Cited by 1,459
(1993) · doi:10.1093/oso/9780198555773.001.0001 · Cited by 1,309
Cited by
Electrically Conductive Metal–Organic Frameworks
Xie, L. S., Skorupskii, G., & Dincă, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00766 · Cited by 1,999
Electrically Conductive Porous Metal–Organic Frameworks
Sun, L., Campbell, M. G., & Dincă, M. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201506219 · Cited by 1,901
Tunable Electrical Conductivity in Metal-Organic Framework Thin-Film Devices
Talin, A. A., Centrone, A., Ford, A. C., Foster, M. E., Stavila, V., Haney, P., Kinney, R. A., Szalai, V., El Gabaly, F., Yoon, H. P., et al. (2014) · Science · doi:10.1126/science.1246738 · Cited by 1,233
Sheberla, D., Sun, L., Blood-Forsythe, M. A., Er, S., Wade, C. R., Brozek, C. K., Aspuru-Guzik, A., & Dincă, M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502765n · Cited by 1,168
Campbell, M. G., Sheberla, D., Liu, S. F., Swager, T. M., & Dincă, M. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411854 · Cited by 1,063
He, C., Liu, D., & Lin, W. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00125 · Cited by 1,001
Metal–Organic Frameworks as A Tunable Platform for Designing Functional Molecular Materials
Wang, C., Liu, D., & Lin, W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja308229p · Cited by 981
New Porous Crystals of Extended Metal-Catecholates
Hmadeh, M., Lu, Z., Liu, Z., Gándara, F., Furukawa, H., Wan, S., Augustyn, V., Chang, R., Liao, L., Zhou, F., et al. (2012) · Chemistry of Materials · doi:10.1021/cm301194a · Cited by 947
Self-citationMicroporous Metal-Organic Framework Materials for Gas Separation
Lin, R.-B., Xiang, S., Zhou, W., & Chen, B. (2020) · Chem · doi:10.1016/j.chempr.2019.10.012 · Cited by 942
Chemiresistive Sensor Arrays from Conductive 2D Metal–Organic Frameworks
Campbell, M. G., Liu, S. F., Swager, T. M., & Dincă, M. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b09600 · Cited by 852
Beyond click chemistry – supramolecular interactions of 1,2,3-triazoles
Schulze, B., & Schubert, U. S. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60386e · Cited by 799
Metal organic frameworks for sensing applications
Kumar, P., Deep, A., & Kim, K.-H. (2015) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2015.04.009 · Cited by 598
Adsorption of iodine in metal–organic framework materials
Zhang, X., Maddock, J., Nenoff, T. M., Denecke, M. A., Yang, S., & Schröder, M. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01192d · Cited by 557
Li, G., Zhao, S., Zhang, Y., & Tang, Z. (2018) · Advanced Materials · doi:10.1002/adma.201800702 · Cited by 521
Metal–organic frameworks as heterogeneous photocatalysts: advantages and challenges
Nasalevich, M. A., van der Veen, M., Kapteijn, F., & Gascon, J. (2014) · CrystEngComm · doi:10.1039/c4ce00032c · Cited by 501
Park, S. S., Hontz, E. R., Sun, L., Hendon, C. H., Walsh, A., Van Voorhis, T., & Dincă, M. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512437u · Cited by 423
Zhou, J., & Wang, B. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00283a · Cited by 418
Zhang, Y.-B., Furukawa, H., Ko, N., Nie, W., Park, H. J., Okajima, S., Cordova, K. E., Deng, H., Kim, J., & Yaghi, O. M. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512311a · Cited by 403
Self-citationPorous materials as effective chemiresistive gas sensors
Sharma, A., Eadi, S. B., Noothalapati, H., Otyepka, M., Lee, H.-D., & Jayaramulu, K. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00761d · Cited by 352
Zhao, R., Liang, Z., Gao, S., Yang, C., Zhu, B., Zhao, J., Qu, C., Zou, R., & Xu, Q. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201811126 · Cited by 349
Meyer, L. V., Schönfeld, F., & Müller-Buschbaum, K. (2014) · Chemical Communications · doi:10.1039/c4cc00848k · Cited by 341
Sun, L., Miyakai, T., Seki, S., & Dincă, M. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4037516 · Cited by 341
Electron delocalization and charge mobility as a function of reduction in a metal–organic framework
Aubrey, M. L., Wiers, B. M., Andrews, S. C., Sakurai, T., Reyes-Lillo, S. E., Hamed, S. M., Yu, C.-J., Darago, L. E., Mason, J. A., Baeg, J.-O., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0098-1 · Cited by 331
Electronic Structure Modeling of Metal–Organic Frameworks
Mancuso, J. L., Mroz, A. M., Le, K. N., & Hendon, C. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00148 · Cited by 329
Hu, L., Dai, C., Chen, L., Zhu, Y., Hao, Y., Zhang, Q., Gu, L., Feng, X., Yuan, S., Wang, L., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202113895 · Cited by 314
Three-Dimensional Metal-Catecholate Frameworks and Their Ultrahigh Proton Conductivity
Nguyen, N. T. T., Furukawa, H., Gándara, F., Trickett, C. A., Jeong, H. M., Cordova, K. E., & Yaghi, O. M. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10999 · Cited by 312
Self-citationSensing organic analytes by metal–organic frameworks: a new way of considering the topic
Hu, M.-L., Razavi, S. A. A., Piroozzadeh, M., & Morsali, A. (2020) · Inorganic Chemistry Frontiers · doi:10.1039/c9qi01617a · Cited by 295
Erickson, K. J., Léonard, F., Stavila, V., Foster, M. E., Spataru, C. D., Jones, R. E., Foley, B. M., Hopkins, P. E., Allendorf, M. D., & Talin, A. A. (2015) · Advanced Materials · doi:10.1002/adma.201501078 · Cited by 294
Manna, K., Zhang, T., Greene, F. X., & Lin, W. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512478y · Cited by 289
Dolgopolova, E. A., Brandt, A. J., Ejegbavwo, O. A., Duke, A. S., Maddumapatabandi, T. D., Galhenage, R. P., Larson, B. W., Reid, O. G., Ammal, S. C., Heyden, A., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01125 · Cited by 262
Metadata
- Authors
- Gándara, F., Uribe‐Romo, F. J., Britt, D. K., Furukawa, H., Lei, L., Cheng, R., Duan, X., O'Keeffe, M., & Yaghi, O. M.
- Venue
- Chemistry – A European Journal
- Publisher
- Wiley
- Published
- 2012-06-22
- Volume
- 18
- Issue
- 34
- Pages
- 10595-10601
- ISSN
- 0947-6539 (ISSN-L)
- 1521-3765
- OpenAlex
- W1983468448
- Cited by
- 300
- References
- 27
- FWCI
- 8.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.