The DOI matches its Crossref record; 178 of the 178 references it cites were found in a registry or an index.
A review on battery management system from the modeling efforts to its multiapplication and integration
Abstract
Progress in battery technology accelerates the transition of battery management system (BMS) from a mere monitoring unit to a multifunction integrated one. It is necessary to establish a battery model for the implementation of BMS's effective control. With more comprehensive and faster battery model, it would be accurate and effective to reflect the behavior of the battery level to the vehicle. On this basis, to ensure battery safety, power, and durability, some key technologies based on the model are advanced, such as battery state estimation, energy equalization, thermal management, and fault diagnosis. Besides, the communication of interactions between BMS and vehicle controllers, motor controllers, etc is an essential consideration for optimizing driving and improving vehicle performance. As concluded, a synergistic and collaborative BMS is the foundation for green-energy vehicles to be intelligent, electric, networked, and shared. Thus, this paper reviews the research and development (R&D) of multiphysics model simulation and multifunction integrated BMS technology. In addition, summary of the relevant research and state-of-the-art technology is dedicated to improving the synergy and coordination of BMS and to promote the innovation and optimization of new energy vehicle technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 2×
“And its calculation can be derived from the battery heat generation expression based on the thermodynamic energy balance proposed by Bernardi et al.(20) The expression took into account the heating process of electrochemical reaction, phase transition, and heat mixing.”
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427
Cycle-life model for graphite-LiFePO4 cells
Wang, J., Liu, P., Hicks-Garner, J., Sherman, E., Soukiazian, S., Verbrugge, M., Tataria, H., Musser, J., & Finamore, P. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.134 · Cited by 1,760
A review on lithium-ion battery ageing mechanisms and estimations for automotive applications
Barré, A., Deguilhem, B., Grolleau, S., Gérard, M., Suard, F., & Riu, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.040 · Cited by 1,758
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
A Generic Battery Model for the Dynamic Simulation of Hybrid Electric Vehicles
Tremblay, O., Dessaint, L.-A., & Dekkiche, A.-I. (2007) · 2007 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2007.4544139 · Cited by 1,244
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
Metal–Air Batteries: Will They Be the Future Electrochemical Energy Storage Device of Choice?
Li, Y., & Lu, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00119 · Cited by 990
Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery
Forgez, C., Vinh Do, D., Friedrich, G., Morcrette, M., & Delacourt, C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.105 · Cited by 942
Development of First Principles Capacity Fade Model for Li-Ion Cells
Ramadass, P., Haran, B., Gomadam, P. M., White, R., & Popov, B. N. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1634273 · Cited by 794
A review on electric vehicle battery modelling: From Lithium-ion toward Lithium–Sulphur
Fotouhi, A., Auger, D. J., Propp, K., Longo, S., & Wild, M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.009 · Cited by 780
A holistic aging model for Li(NiMnCo)O2 based 18650 lithium-ion batteries
Schmalstieg, J., Käbitz, S., Ecker, M., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.012 · Cited by 755
Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective
Northrop, P. W. C., De, S., Braatz, R. D., Ramadesigan, V., Northrop, P. W. C., Santhanagopalan, S., & Subramaniana, V. R. (2011) · Cited by 748
Omar, N., Monem, M. A., Firouz, Y., Salminen, J., Smekens, J., Hegazy, O., Gaulous, H., Mulder, G., Van den Bossche, P., Coosemans, T., et al. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.09.003 · Cited by 740
A lumped-parameter electro-thermal model for cylindrical batteries
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y., & Castanier, M. P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.097 · Cited by 677 · cited 1×
“Lin et al 27 regarded the battery as two layers inside and outside and proposed a thermal model that can capture the battery surface and core temperature.”
Ecker, M., Gerschler, J. B., Vogel, J., Käbitz, S., Hust, F., Dechent, P., & Sauer, D. U. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.012 · Cited by 642
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Battery performance models in ADVISOR
Johnson, V. H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00194-5 · Cited by 636
Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries
Jokar, A., Rajabloo, B., Désilets, M., & Lacroix, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.036 · Cited by 592
Technological Developments in Batteries: A Survey of Principal Roles, Types, and Management Needs
Hu, X., Zou, C., Zhang, C., & Li, Y. (2017) · IEEE Power and Energy Magazine · doi:10.1109/mpe.2017.2708812 · Cited by 561
Battery equalization active methods
Gallardo-Lozano, J., Romero-Cadaval, E., Milanes-Montero, M. I., & Guerrero-Martinez, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.026 · Cited by 542
Battery management systems in electric and hybrid vehicles
Xing, Y., Ma, E. W. M., Tsui, K. L., & Pecht, M. (2011) · Energies · doi:10.3390/en4111840 · Cited by 540
Shen, P., Ouyang, M., Lu, L., Li, J., & Feng, X. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2751613 · Cited by 534
Intelligent Control Battery Equalization for Series Connected Lithium-Ion Battery Strings
Lee, Y.-S., & Cheng, M.-W. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855673 · Cited by 533
Pelletier, S., Jabali, O., Laporte, G., & Veneroni, M. (2017) · Transportation Research Part B: Methodological · doi:10.1016/j.trb.2017.01.020 · Cited by 515
Fundamentals of battery dynamics
Jossen, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.041 · Cited by 510
Bhangu, B. S., Bentley, P., Stone, D. A., & Bingham, C. M. (2005) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2004.842461 · Cited by 507
A Mathematical Model of Stress Generation and Fracture in Lithium Manganese Oxide
Christensen, J., & Newman, J. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2185287 · Cited by 485
A review of safety-focused mechanical modeling of commercial lithium-ion batteries
Zhu, J., Wierzbicki, T., & Li, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.034 · Cited by 482
Mathematical modeling of the capacity fade of Li-ion cells
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00531-7 · Cited by 446
The use of mathematical modeling in the design of lithium/polymer battery systems
Doyle, M., & Newman, J. (1995) · Electrochimica Acta · doi:10.1016/0013-4686(95)00162-8 · Cited by 433
Multi-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales
Kim, G.-H., Smith, K., Lee, K.-J., Santhanagopalan, S., & Pesaran, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3597614 · Cited by 431
Rao, Z., Wang, Q., & Huang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.021 · Cited by 404
Remmlinger, J., Buchholz, M., Meiler, M., Bernreuter, P., & Dietmayer, K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.035 · Cited by 392
Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system
Basu, S., Hariharan, K. S., Kolake, S. M., Song, T., Sohn, D. K., & Yeo, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.049 · Cited by 389
Trip-Based Optimal Power Management of Plug-in Hybrid Electric Vehicles
Gong, Q., Li, Y., & Peng, Z. (2008) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2008.921622 · Cited by 376
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles
Onda, K., Ohshima, T., Nakayama, M., Fukuda, K., & Araki, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.08.049 · Cited by 375
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.050 · Cited by 373
Li, Q., Chen, L., Li, M., Shaw, S.-L., & Nuchter, A. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2281199 · Cited by 371
Meng, J., Luo, G., Ricco, M., Swierczynski, M., Stroe, D.-I., & Teodorescu, R. (2018) · Applied Sciences · doi:10.3390/app8050659 · Cited by 370
Roscher, M. A., & Sauer, D. U. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.098 · Cited by 364
Heat‐Generation Rate and General Energy Balance for Insertion Battery Systems
Rao, L., & Newman, J. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837884 · Cited by 333
Zhao, R., Gu, J., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.007 · Cited by 332
Feng, X., Pan, Y., He, X., Wang, L., & Ouyang, M. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.04.020 · Cited by 324
The sodium/nickel chloride (ZEBRA) battery
Sudworth, J. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00891-6 · Cited by 323
Thermal Modeling of the Lithium/Polymer Battery: I . Discharge Behavior of a Single Cell
Pals, C. R., & Newman, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2049974 · Cited by 315
Novel thermal management system using mist cooling for lithium-ion battery packs
Saw, L. H., Poon, H. M., Thiam, H. S., Cai, Z., Chong, W. T., Pambudi, N. A., & King, Y. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.042 · Cited by 314
Solid electrolytes and interfaces in all-solid-state sodium batteries: Progress and perspective
Hou, W., Guo, X., Shen, X., Amine, K., Yu, H., & Lu, J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.036 · Cited by 314
Dong, H., Jin, X., Lou, Y., & Wang, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.176 · Cited by 310
Internal short circuit detection for battery pack using equivalent parameter and consistency method
Ouyang, M., Zhang, M., Feng, X., Lu, L., Li, J., He, X., & Zheng, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.087 · Cited by 309
Partovibakhsh, M., & Liu, G. (2015) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2014.2317781 · Cited by 301
High-Performance Battery-Pack Power Estimation Using a Dynamic Cell Model
Plett, G. L. (2004) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2004.832408 · Cited by 290
Greco, A., Cao, D., Jiang, X., & Yang, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.004 · Cited by 280
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
Battery State-of-Charge Estimation Based on Regular/Recurrent Gaussian Process Regression
Sahinoglu, G. O., Pajovic, M., Sahinoglu, Z., Wang, Y., Orlik, P. V., & Wada, T. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2764869 · Cited by 278
Bizeray, A. M., Zhao, S., Duncan, S. R., & Howey, D. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.019 · Cited by 269
Montazeri‐Gh, M., Poursamad, A., & Ghalichi, B. (2006) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2006.02.015 · Cited by 269
Battery charge equalization controller in electric vehicle applications: A review
Hoque, M. M., Hannan, M. A., Mohamed, A., & Ayob, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.126 · Cited by 269
Grolleau, S., Delaille, A., Gualous, H., Gyan, P., Revel, R., Bernard, J., Redondo-Iglesias, E., & Peter, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.098 · Cited by 268
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2015) · Energy · doi:10.1016/j.energy.2014.11.073 · Cited by 262
Battery state of health estimation: a structured review of models, methods and commercial devices
Ungurean, L., Cârstoiu, G., Micea, M. V., & Groza, V. (2017) · International Journal of Energy Research · doi:10.1002/er.3598 · Cited by 260
Deformation and failure mechanisms of 18650 battery cells under axial compression
Zhu, J., Zhang, X., Sahraei, E., & Wierzbicki, T. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.064 · Cited by 250
Zhang, Y., Xiong, R., He, H., & Shen, W. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2603229 · Cited by 235
Modeling thermal management of lithium-ion PNGV batteries
Nelson, P., Dees, D., Amine, K., & Henriksen, G. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00197-0 · Cited by 234
Heats of mixing and of entropy in porous insertion electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00283-0 · Cited by 230
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.067 · Cited by 228
Impedance-Based Battery Management System for Safety Monitoring of Lithium-Ion Batteries
Carkhuff, B. G., Demirev, P. A., & Srinivasan, R. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2786199 · Cited by 228
A review of novel thermal management systems for batteries
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2018) · International Journal of Energy Research · doi:10.1002/er.4095 · Cited by 224
Liu, D., Luo, Y., Liu, J., Peng, Y., Guo, L., & Pecht, M. (2014) · Neural Computing and Applications · doi:10.1007/s00521-013-1520-x · Cited by 223
An electrochemical–thermal model based on dynamic responses for lithium iron phosphate battery
Li, J., Cheng, Y., Jia, M., Tang, Y., Lin, Y., Zhang, Z., & Liu, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.007 · Cited by 219
Designing a new generalized battery management system
Chatzakis, J., Kalaitzakis, K., Voulgaris, N. C., & Manias, S. N. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817706 · Cited by 216
Wang, Y., Gao, Q., Wang, G., Lu, P., Zhao, M., & Bao, W. (2018) · International Journal of Energy Research · doi:10.1002/er.4158 · Cited by 216
Self-citationModeling capacity fade in lithium-ion cells
Liaw, B. Y., Jungst, R. G., Nagasubramanian, G., Case, H. L., & Doughty, D. H. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.08.017 · Cited by 215
Zheng, Y., Ouyang, M., Lu, L., Li, J., Han, X., Xu, L., Ma, H., Dollmeyer, T. A., & Freyermuth, V. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.048 · Cited by 212
Lee, K.-J., Smith, K., Pesaran, A., & Kim, G.-H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.007 · Cited by 212
Thermal Modeling of the Lithium/Polymer Battery: II . Temperature Profiles in a Cell Stack
Pals, C. R., & Newman, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2049975 · Cited by 206
Ling, Z., Wen, X., Zhang, Z., Fang, X., & Gao, X. (2018) · Energy · doi:10.1016/j.energy.2017.12.098 · Cited by 202
Kong, X., Zheng, Y., Ouyang, M., Lu, L., Li, J., & Zhang, Z. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.097 · Cited by 201
Lazrak, A., Fourmigué, J.-F., & Robin, J.-F. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.08.172 · Cited by 200
Equalization of Lithium-Ion Battery Pack Based on Fuzzy Logic Control in Electric Vehicle
Ma, Y., Duan, P., Sun, Y., & Chen, H. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2795578 · Cited by 199
Zhang, C., Jiang, Y., Jiang, J., Cheng, G., Diao, W., & Zhang, W. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.176 · Cited by 190
Status and development of electric vehicle integrated thermal management from BTM to HVAC
Zhang, T., Gao, C., Gao, Q., Wang, G., Liu, M., Guo, Y., Xiao, C., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.001 · Cited by 189
Self-citationDynamic equalization techniques for series battery stacks
Kutkut, N. H., & Divan, D. M. (2002) · Proceedings of Intelec'96 - International Telecommunications Energy Conference · doi:10.1109/intlec.1996.573384 · Cited by 183
A Merged Fuzzy Neural Network and Its Applications in Battery State-of-Charge Estimation
Li, I.-H., Wang, W.-Y., Su, S.-F., & Lee, Y.-S. (2007) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2007.895457 · Cited by 171
Sauerteig, D., Hanselmann, N., Arzberger, A., Reinshagen, H., Ivanov, S., & Bund, A. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.044 · Cited by 167
Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack
Yang, T., Yang, N., Zhang, X., & Li, G. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.05.009 · Cited by 166
Correct-by-Construction Adaptive Cruise Control: Two Approaches
Nilsson, P., Hussien, O., Balkan, A., Chen, Y., Ames, A. D., Grizzle, J. W., Ozay, N., Peng, H., & Tabuada, P. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2501351 · Cited by 163
Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries
Zhang, J., Wu, B., Li, Z., & Huang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.079 · Cited by 157
Farag, M., Sweity, H., Fleckenstein, M., & Habibi, S. R. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.06.031 · Cited by 149
Li, J., Cheng, Y., Ai, L., Jia, M., Du, S., Yin, B., Stanley, W., & Zhang, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.034 · Cited by 146
Three-dimensional thermal modeling of a lithium-ion battery pack
Sun, H., Wang, X., Tossan, B., & Dixon, R. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.081 · Cited by 146
Zou, H., Wang, W., Zhang, G., Qin, F., Tian, C., & Yan, Y. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.03.066 · Cited by 145
Numerical modeling of electrochemical–mechanical interactions in lithium polymer batteries
Golmon, S., Maute, K. K., & Dunn, M. L. (2009) · Computers & Structures · doi:10.1016/j.compstruc.2009.08.005 · Cited by 143
Electrochemical–Thermal Model of Pouch-type Lithium-ion Batteries
Ghalkhani, M., Bahiraei, F., Nazri, G., & Saif, M. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.164 · Cited by 142
Banguero, E., Correcher, A., Pérez-Navarro, Á., Morant, F., & Aristizábal, A. J. (2018) · Energies · doi:10.3390/en11041021 · Cited by 140
Modelling electro-thermal response of lithium-ion batteries from normal to abuse conditions
Ping, P., Wang, Q., Chung, Y. M., & Wen, J. X. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.08.073 · Cited by 138
Onori, S., Spagnol, P., Marano, V., GUEZENNEC, Y. G., & Rizzoni, G. (2012) · International Journal of Power Electronics · doi:10.1504/ijpelec.2012.046609 · Cited by 137
Effect of thermal contact resistances on fast charging of large format lithium ion batteries
Ye, Y., Saw, L. H., Shi, Y., Somasundaram, K., & Tay, A. A. O. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.134 · Cited by 135
A three-dimensional multi-physics model for a Li-ion battery
Guo, M., Kim, G., & White, R. E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.170 · Cited by 134
Zheng, Y., Ouyang, M., Lu, L., Li, J., Han, X., & Xu, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.030 · Cited by 134
Fast equalization for large lithium ion batteries
Stuart, T. A., & Zhu, W. D. (2009) · IEEE Aerospace and Electronic Systems Magazine · doi:10.1109/maes.2009.5208557 · Cited by 133
A Review of Li-ion Battery Equivalent Circuit Models
Zhang, X., Zhang, W., & Lei, G. (2016) · Transactions on Electrical and Electronic Materials · doi:10.4313/teem.2016.17.6.311 · Cited by 133
A reduced low-temperature electro-thermal coupled model for lithium-ion batteries
Jiang, J., Ruan, H., Sun, B., Zhang, W., Gao, W., Wang, L. Y., & Zhang, L. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.153 · Cited by 131
Geetha, A., & Subramani, C. (2017) · International Journal of Energy Research · doi:10.1002/er.3730 · Cited by 127
Fracture Analysis of the Cathode in Li-Ion Batteries: A Simulation Study
Zhu, M., Park, J. H., & Sastry, A. M. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.045204jes · Cited by 126
An alternating current heating method for lithium-ion batteries from subzero temperatures
Zhu, J., Sun, Z., Wei, X., & Dai, H. (2016) · International Journal of Energy Research · doi:10.1002/er.3576 · Cited by 123
Yi, J., Kim, U., Shin, C., Han, T., & Park, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.085 · Cited by 122
An adaptive remaining energy prediction approach for lithium-ion batteries in electric vehicles
Wang, Y., Zhang, C., & Chen, Z. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.087 · Cited by 114
Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes
Shah, K., McKee, C., Chalise, D., & Jain, A. (2016) · Energy · doi:10.1016/j.energy.2016.07.076 · Cited by 113
Review of battery cell balancing techniques
Qi, J. C., & Lu, D. D. (2014) · Australasian Universities Power Engineering Conference · doi:10.1109/aupec.2014.6966514 · Cited by 112
Model-based Sensor Fault Diagnosis of a Lithium-ion Battery in Electric Vehicles
Liu, Z., & He, H. (2015) · Energies · doi:10.3390/en8076509 · Cited by 111
Model based insulation fault diagnosis for lithium-ion battery pack in electric vehicles
Wang, Y., Tian, J., Chen, Z., & Liu, X. (2018) · Measurement · doi:10.1016/j.measurement.2018.09.007 · Cited by 111
Liu, G., Ouyang, M., Lu, L., Li, J., & Hua, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.110 · Cited by 109
Huo, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.009 · Cited by 109
Battery state of charge estimation using an Artificial Neural Network
Ismail, M., Dlyma, R., Elrakaybi, A., Ahmed, R., & Habibi, S. (2017) · 2017 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2017.7993295 · Cited by 109
Active battery cell equalization based on residual available energy maximization
Diao, W., Xue, N., Bhattacharjee, V., Jiang, J., Karabaşoğlu, O., & PECHT, M. G. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.137 · Cited by 107
Dai, H., Jiang, B., & Wei, X. (2018) · Energies · doi:10.3390/en11010220 · Cited by 102
Jung, D. Y., Lee, B. H., & Kim, S. W. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00020-4 · Cited by 95
On-line remaining energy prediction: A case study in embedded battery management system
Wang, Y., Chen, Z., & Zhang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.081 · Cited by 95
Zhao, G., Zhang, G., Liu, Y., Zhang, B., & Hu, C. (2017) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2017.7998298 · Cited by 93
Du, S., Jia, M., Cheng, Y., et al. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.11.018 · Cited by 90
Wang, Q., Kang, J., Tan, Z., & Luo, M. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.08.076 · Cited by 90
Liu, G., Ouyang, M., Lu, L., Li, J., & Han, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.132 · Cited by 82
Kupper, C., & Bessler, W. G. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0761702jes · Cited by 82
Model-Based Virtual Thermal Sensors for Lithium-Ion Battery in EV Applications
Xiao, Y. Z. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2386793 · Cited by 80
Three-Dimensional Multi-Physics Model for Li-Ion Battery
Guo, M. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/14/1212 · Cited by 79
Overview of the sodium-sulfur battery for the IEEE stationary battery committee
Akihiro, B. I. T. O. (2005) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2005.1489556 · Cited by 74
Yuan, S., Jiang, L., Yin, C., Wu, H., & Zhang, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.060 · Cited by 74
Mamadou, K., Lemaire, E., Delaille, A., Riu, D., Hing, S. E., & Bultel, Y. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.075208jes · Cited by 73
Multimode Energy Management for Plug-In Hybrid Electric Buses Based on Driving Cycles Prediction
Chen, Z., Li, L., Yan, B., Yang, C., Martínez, C. M., & Cao, D. (2016) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2016.2527244 · Cited by 73
Balagopal, B., & Chow, M. (2015) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2015.7281923 · Cited by 67
Jiang, Z., Qu, Z., Zhou, L., & Tao, W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.10.125 · Cited by 67
Advances in Integrated Vehicle Thermal Management and Numerical Simulation
Wang, Y., Gao, Q., Zhang, T., Wang, G., Jiang, Z., & Li, Y. (2017) · Energies · doi:10.3390/en10101636 · Cited by 67
Self-citationProbing the Thermal Implications in Mechanical Degradation of Lithium-Ion Battery Electrodes
An, K., Barai, P., Smith, K. A., & Mukherjee, P. P. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.069406jes · Cited by 64
A novel phenomenological multi-physics model of Li-ion battery cells
Oh, K., Samad, N. A., Kim, Y., Siegel, J. B., Stefanopoulou, A. G., & Epureanu, B. I. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.019 · Cited by 62
Li, X., Pan, K., Fan, G., Lu, R., Zhu, C., Rizzoni, G., & Canova, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.048 · Cited by 62
Characterization and modeling of the thermal mechanics of lithium-ion battery cells
Oh, K., & Epureanu, B. I. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.069 · Cited by 61
Zheng, Y., Ouyang, M., Lu, L., Li, J., Han, X., & Xu, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.012 · Cited by 60
Kim, U. S., Yi, J., Shin, C. B., Han, T., & Park, S. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.146306jes · Cited by 60
Novel active LiFePO4 battery balancing method based on chargeable and dischargeable capacity
Cui, X., Shen, W., Zhang, Y., Hu, C., & Zheng, J. (2016) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2016.11.014 · Cited by 59
An adaptive state of charge estimation approach for lithium-ion series-connected battery system
Peng, S., Zhu, X., Xing, Y., Shi, H., Cai, X., & PECHT, M. G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.101 · Cited by 59
Non-isothermal electrochemical model for lithium-ion cells with composite cathodes
Basu, S., Patil, R. S., Ramachandran, S., Hariharan, K. S., Kolake, S. M., Song, T., Oh, D., Yeo, T., & Doo, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.127 · Cited by 56
A Novel Model-Based Algorithm for Battery Prognosis
Serrao, L., Onori, S., Rizzoni, G., & GUEZENNEC, Y. G. (2009) · IFAC Proceedings Volumes · doi:10.3182/20090630-4-es-2003.00152 · Cited by 54
A coupled electrochemical–thermal–mechanical model for spiral-wound Li-ion batteries
Duan, X., Jiang, W., Zou, Y., Lei, W., & Ma, Z. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2365-6 · Cited by 53
Miranda, A. G., & Hong, C. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.05.047 · Cited by 50
Semi-empirical modeling of charge and discharge profiles for a LiCoO2 electrode
Zhang, Q., Guo, Q., & White, R. E. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.025 · Cited by 47
Study on impedance model of Li-ion battery
Luo, W., Lv, C., Wang, L., & Liu, C. (2011) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2011.5975910 · Cited by 46
Electrochemical-Thermal Modeling to Evaluate Battery Thermal Management Strategies
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0571501jes · Cited by 41
Xiao, M., & Choe, S.-Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.103 · Cited by 41
Sodium nickel chloride battery steady-state regime model for stationary electrical energy storage
Sessa, S. D., Crugnola, G., Todeschini, M., et al. (2016) · Journal of Energy Storage · doi:10.1016/j.est.2016.03.005 · Cited by 41
SECONDARY BATTERIES – LEAD– ACID SYSTEMS | State-of-Charge/Health
Waag, W., & Sauer, D. U. (2009) · Elsevier eBooks · doi:10.1016/b978-044452745-5.00149-0 · Cited by 40
Juang, L. W., Kollmeyer, P. J., Jahns, T. M., & Lorenz, R. D. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342591 · Cited by 40
Yuan, S., Jiang, L., Yin, C., Wu, H., & Zhang, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.061 · Cited by 39
Modeling of thermo-mechanical stresses in Li-ion battery
Valentin, O., Thivel, P., Kareemulla, T., Cadiou, F., & Bultel, Y. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.07.018 · Cited by 36
Sessa, S. D., Tortella, A., Andriollo, M., et al. (2018) · Applied Sciences · doi:10.3390/app8112330 · Cited by 36
Effat, M. B., Wu, C., & Francesco Ciucci, A. (2016) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.1999 · Cited by 34
A Novel Method for the Parameterization of a Li-Ion Cell Model for EV/HEV Control Applications
Antaloae, C., Marco, J., & Assadian, F. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2212474 · Cited by 33
Online Diagnosis for the Capacity Fade Fault of a Parallel-Connected Lithium Ion Battery Group
Zhang, H., Pei, L., Sun, J., Song, K., Lu, R., Zhao, Y.-P., Zhu, C., & Wang, T. (2016) · Energies · doi:10.3390/en9050387 · Cited by 32
A three-dimensional meso-macroscopic model for Li-Ion intercalation batteries
Allu, S., Kalnaus, S., Simunovic, S., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.001 · Cited by 32
Thermal modelling of new Li-ion cell design modifications
Sievers, M., Sievers, U., & Mao, S. S. (2010) · Forschung im Ingenieurwesen · doi:10.1007/s10010-010-0127-y · Cited by 30
Saxena, S., Raman, S. R., Saritha, B., & John, V. (2016) · Sadhana · doi:10.1007/s12046-016-0486-7 · Cited by 30
A physics based reduced order aging model for lithium-ion cells with phase change
Gambhire, P., Hariharan, K. S., Khandelwal, A., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.127 · Cited by 27
DC internal resistance during charge: Analysis and study on LiFePO4 batteries
Anseán, D., Garcia, V. M., Gonzalez, M., Viera, J. C., Blanco, C., & Antuna, J. L. (2013) · World Electric Vehicle Symposium and Exhibition (EVS) · doi:10.1109/evs.2013.6914746 · Cited by 25
Estimation of Real-Time Peak Power Capability of a Traction Battery Pack Used in an HEV
Zhang, C., Zhang, C., & Sharkh, S. M. (2010) · Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2010.5448755 · Cited by 22
Generic Battery model covering self-discharge and internal resistance variation
Sibi Krishnan, K., Pathiyil, P., & Sunitha, R. (2016) · International Conference on Power Systems (ICPS) · doi:10.1109/icpes.2016.7584003 · Cited by 19
Deng, Z., Yang, L., Cai, Y., & Deng, H. (2017) · Energy Procedia · doi:10.1016/j.egypro.2016.12.131 · Cited by 19
Prada, E., Domenico, D. D., Yann Creff, A., Bernard, J., Sauvant-Moynot, V., & Huet, F. (2012) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2012.6422717 · Cited by 15
State-of-charge Estimation for Lithium-ion Battery using a Combined Method
Li, G., Peng, K., & Li, B. (2018) · Journal of Power Electronics · doi:10.6113/jpe.2018.18.1.129 · Cited by 13
Battery model for Hybrid Electric Vehicle corrected for self-discharge and internal resistance
Pathiyil, P., Krishnan, K. S., Sunitha, R., et al. (2016) · International Conference on Advances in Electrical, Electronics, Information, Communication and Bio-Informatics · doi:10.1109/aeeicb.2016.7538276 · Cited by 12
Li, S., Peng, X., Zhang, J., Garg, A., Nguyen, H.-D., & Le, P. M. L. (2018) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4040824 · Cited by 9
A Novel Real-Time State-of-Health and State-of-Charge Co-Estimation Method for LiFePO 4 Battery
Qiao, R.-X., Zhang, M., Liu, Y., Ren, W., Lin, Y. H., & Pan, F. M. (2016) · Chinese Physics Letters · doi:10.1088/0256-307x/33/7/078201 · Cited by 7
Prada, E., Domenico, D. D., Yann Creff, A., & Sauvant-Moynot, V. (2013) · World Electric Vehicle Symposium and Exhibition (EVS) · doi:10.1109/evs.2013.6914790 · Cited by 7
Transient behavior modeling and physical meaning analysis for Battery
Xiangyang, G., Jun, Z., & Ning, N. (2010) · International Conference on Computer Application and System Modeling · doi:10.1109/iccasm.2010.5620745 · Cited by 5
A Smart Battery Management System for Large Format Lithium Ion Cells
Zhu, W. D. (2011) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 4
Noh, T.-W., Ahn, J.-H., & Lee, B. K. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096934 · Cited by 3
Cited by
Hossain Lipu, M. S., Hannan, M. A., Karim, T. F., Hussain, A., Saad, M. H. M., Ayob, A., Miah, M. S., & Indra Mahlia, T. M. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126044 · Cited by 446
Ge, M.-F., Liu, Y., Jiang, X., & Liu, J. (2021) · Measurement · doi:10.1016/j.measurement.2021.109057 · Cited by 418
Lv, C., Zhou, X., Zhong, L., Yan, C., Srinivasan, M., Seh, Z. W., Liu, C., Pan, H., Li, S., Wen, Y., et al. (2022) · Advanced Materials · doi:10.1002/adma.202101474 · Cited by 412
Kebede, A. A., Coosemans, T., Messagie, M., Jemal, T., Behabtu, H. A., Van Mierlo, J., & Berecibar, M. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102748 · Cited by 326
Ren, Z., & Du, C. (2023) · Energy Reports · doi:10.1016/j.egyr.2023.01.108 · Cited by 277
Metadata
- Authors
- Shen, M., & Gao, Q.
- Venue
- International Journal of Energy Research
- Publisher
- Wiley
- Published
- 2019-04-10
- Volume
- 43
- Issue
- 10
- Pages
- 5042-5075
- ISSN
- 0363-907X (ISSN-L)
- 1099-114X
- OpenAlex
- W2936518938
- Cited by
- 271
- References
- 178
- FWCI
- 10.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.