The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Biological response of intramedullary bone to poly‐L‐lactic acid
Abstract
This study focuses on examining the biological response of intramedullary bone to poly‐L‐lactic acid (PLLA), particularly during the PLLA degradation phase. To study the influence of spherical crystals (spherulites) of PLLA on intramedullary bone response, two different types of PLLA coupon, with and without spherulites but with the same molecular weight, were used. Chambers containing PLLA coupons were implanted into the right femur of eight dogs, four with and four without spherulites; chambers containing stainless steel (SS) coupons (as a control) were implanted in the left femurs of all eight. Two dogs, one with and one without spherulites, were sacrificed at 3, 6, 12, and 24 weeks postoperatively. Histomorphometric evaluation and histophathological assessment were used to compare the response to PLLA and SS. Scanning electron micrographs showed that there were minimal changes in the surface of PLLA coupons at 3 and 6 weeks. But at 12 and 24 weeks, there were many cracks and holes on the surfaces of the coupons, and some parts of the surface were scaling off. The cross‐sectional area of PLLA coupons showed no change at 3 and 6 weeks, but started to decrease by 12 weeks. The amount of ingrown bone between PLLA coupons was significantly greater than that between SS coupons at 3 and 6 weeks, but had decreased dramatically by 12 weeks. Extensive bone resorption around PLLA coupons occurred by 12 weeks accompanied by infiltration of inflammatory cells. An abundance of histiocytes, giant cells, and leucocytes were seen, along with a few histiocytes that had phagocytized PLLA particles of less than 2 μm. By contrast, no inflammatory reaction was seen in SS samples at any period up to and including 24 weeks. PLLA demonstrated excellent biocompatibility with intramedullary bone for the first 6 weeks in this model. Once degradation commenced, however, biocompatibility decreased dramatically. Our study detected no difference between coupons with and without spherulites. It thus appears that the existence of relatively large PLLA particles did not influence the response of intramedullary bone to PLLA, but rather that it was the smaller particles (< 2 μm) released from the PLLA that induced foreign‐body inflammatory reactions and bone resorption. It is also possible that a local decrease in pH occurred around PLLA coupons, which could have influenced vital kinetics. © 1993 John Wiley & Sons, Inc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
In vivo and in vitro degradation of glycine/DL‐lactic acid copolymers
Schakenraad, J. M., Nieuwenhuis, P., Molenaar, I., Helder, J., Dijkstra, P. J., & Feijen, J. (1989) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820231105 · Cited by 101
Evaluation and comparisons of biodegradable substances as osteogenic agents
Nelson, J. F., Stanford, H. G., & Cutright, D. E. (1977) · Oral Surgery, Oral Medicine, Oral Pathology · doi:10.1016/0030-4220(77)90075-5 · Cited by 80
Cited by
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
Biocompatibility of hydrogel-based scaffolds for tissue engineering applications
Naahidi, S., Jafari, M., Logan, M., Wang, Y., Yuan, Y., Bae, H., Dixon, B., & Chen, P. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.05.006 · Cited by 907
Initial and 6-Month Results of Biodegradable Poly- l -Lactic Acid Coronary Stents in Humans
Tamai, H., Igaki, K., Kyo, E., Kosuga, K., Kawashima, A., Matsui, S., Komori, H., Tsuji, T., Motohara, S., & Uehata, H. (2000) · Circulation · doi:10.1161/01.cir.102.4.399 · Cited by 806
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H., & Glogauer, M. (2015) · Materials · doi:10.3390/ma8095273 · Cited by 782
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
Yaszemski, M. J., Payne, R. G., Hayes, W. C., Langer, R., & Mikos, A. G. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85762-0 · Cited by 729
Biocompatibility and safety of PLA and its copolymers
Ramot, Y., Haim-Zada, M., Domb, A. J., & Nyska, A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.012 · Cited by 576
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
Fabrication of biodegradable polymer scaffolds to engineer trabecular bone
Thomson, R. C., Yaszemski, M. J., Powers, J. M., & Mikos, A. G. (1996) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856295x00805 · Cited by 493
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Ignatius, A. A., & Claes, L. E. (1996) · Biomaterials · doi:10.1016/0142-9612(96)81421-9 · Cited by 426
Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture
Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 405
Sheikh, Z., Hamdan, N., Ikeda, Y., Grynpas, M., Ganss, B., & Glogauer, M. (2017) · Biomaterials Research · doi:10.1186/s40824-017-0095-5 · Cited by 393
An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
Vanaei, S., Parizi, M. S., Vanaei, S., Salemizadehparizi, F., & Vanaei, H. R. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2020.12.001 · Cited by 308
Lincoff, A. M., Furst, J. G., Ellis, S. G., Tuch, R. J., & Topol, E. J. (1997) · Journal of the American College of Cardiology · doi:10.1016/s0735-1097(96)00584-0 · Cited by 282
Osteoblast function on synthetic biodegradable polymers
Ishaug, S. L., Yaszemski, M. J., Bizios, R., & Mikos, A. G. (1994) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820281210 · Cited by 252
Zhang, H., Mao, X., Du, Z., Jiang, W., Han, X., Zhao, D., Han, D., & Li, Q. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1145532 · Cited by 208
Elevated temperature degradation of a 50:50 copolymer of PLA-PGA
Agrawal, C. M., Huang, D., Schmitz, J. P., & Athanasiou, K. A. (1997) · Tissue Engineering · doi:10.1089/ten.1997.3.345 · Cited by 120
“"(27) Such adverse reactions have generally been associated with the degradation products of PLA-PGA materials.(27) Thus, comprehensive in vitro studies monitoring the degradation characteristics of PLA-PGA implants have become essential as screening tests that help to decrease the number of in vivo studies.”
Fabrication of a Biodegradable Implant with Tunable Characteristics for Bone Implant Applications
Manavitehrani, I., Fathi, A., Wang, Y., Maitz, P. K., Mirmohseni, F., Cheng, T. L., Peacock, L., Little, D. G., Schindeler, A., & Dehghani, F. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00078 · Cited by 55
Yun, Y. J., Kim, H.-J., Lee, D.-W., Um, S., & Chun, H. J. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.06.035 · Cited by 10
Metadata
- Authors
- Suganuma, J., & Alexander, H.
- Venue
- Journal of Applied Biomaterials
- Publisher
- Wiley
- Published
- 1993-03
- Volume
- 4
- Issue
- 1
- Pages
- 13-27
- ISSN
- 1045-4861 (ISSN-L)
- 1549-9316
- OpenAlex
- W2053115218
- Cited by
- 213
- References
- 3
- FWCI
- 11.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.