The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Polypyrrole‐contained electrospun conductive nanofibrous membranes for cardiac tissue engineering
Abstract
Cardiac tissue engineering (TE) is one of the most promising strategies to reconstruct infarct myocardium and the major challenge is to generate a bioactive substrate with suitable chemical, biological, and conductive properties, thus mimicking the extracellular matrix (ECM) both structurally and functionally. In this study, polypyrrole/poly(ε‐caprolactone)/gelatin nanofibrous scaffolds were electrospun by incorporating different concentrations of polypyrrole (PPy) to PCL/gelatin (PG) solution. Morphological, chemical, mechanical, and biodegradation properties of the electrospun nanofibers were evaluated. Our data indicated that by increasing the concentration of PPy (0–30%) in the composite, the average fiber diameters reduced from 239 ± 37 nm to 191 ± 45 nm, and the tensile modulus increased from 7.9 ± 1.6 MPa to 50.3 ± 3.3 MPa. Conductive nanofibers containing 15% PPy (PPG15) exhibited the most balanced properties of conductivity, mechanical properties, and biodegradability, matching the requirements for regeneration of cardiac tissue. The cell proliferation assay, SEM, and immunostaining analysis showed that the PPG15 scaffold promote cell attachment, proliferation, interaction, and expression of cardiac‐specific proteins better than PPG30. Electrospun PPG15 conductive nanofibrous scaffold could be desirable and promising substrates suitable for the regeneration of infarct myocardium and cardiac defects. © 2011 Wiley Periodicals, Inc. J Biomed Mater Res Part A:, 2011.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Conducting polymers in biomedical engineering
Guimard, N. K., Gomez, N., & Schmidt, C. E. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.012 · Cited by 1,599
Stimulation of neurite outgrowth using an electrically conducting polymer
Schmidt, C. E., Shastri, V. R., Vacanti, J. P., & Langer, R. (1997) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.94.17.8948 · Cited by 1,071
Polymeric biomaterials for tissue and organ regeneration
Seal, B. (2001) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(01)00035-3 · Cited by 892
Electrospinning polyaniline-contained gelatin nanofibers for tissue engineering applications
Li, M., Guo, Y., Wei, Y., MacDiarmid, A. G., & Lelkes, P. I. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.11.037 · Cited by 856
Polypyrrole-coated electrospun PLGA nanofibers for neural tissue applications
Lee, J. Y., Bashur, C. A., Goldstein, A. S., & Schmidt, C. E. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.04.042 · Cited by 735
Keun Kwon, I., Kidoaki, S., & Matsuda, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.007 · Cited by 607
Chen, Q.-Z., Bismarck, A., Hansen, U., Junaid, S., Tran, M. Q., Harding, S. E., Ali, N. N., & Boccaccini, A. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.010 · Cited by 530
Electrical stimulation systems for cardiac tissue engineering
Tandon, N., Cannizzaro, C., Chao, P.-H. G., Maidhof, R., Marsano, A., Au, H. T. H., Radisic, M., & Vunjak-Novakovic, G. (2009) · Nature Protocols · doi:10.1038/nprot.2008.183 · Cited by 528
Kotwal, A. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00344-6 · Cited by 518
Challenges in Cardiac Tissue Engineering
Vunjak-Novakovic, G., Tandon, N., Godier, A., Maidhof, R., Marsano, A., Martens, T. P., & Radisic, M. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0352 · Cited by 511
In vivo studies of polypyrrole/peptide coated neural probes
Cui, X. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00415-5 · Cited by 505
Ma, Z., He, W., Yong, T., & Ramakrishna, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1149 · Cited by 477
Self-citationElectrospun nanostructured scaffolds for bone tissue engineering
Prabhakaran, M. P., Venugopal, J., & Ramakrishna, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.05.007 · Cited by 430
Self-citationBiomaterials functionalization using a novel peptide that selectively binds to a conducting polymer
Sanghvi, A. B., Miller, K. P. H., Belcher, A. M., & Schmidt, C. E. (2005) · Nature Materials · doi:10.1038/nmat1397 · Cited by 398
Biomaterials in cardiac tissue engineering: Ten years of research survey
Chen, Q.-Z., Harding, S. E., Ali, N. N., Lyon, A. R., & Boccaccini, A. R. (2008) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.08.001 · Cited by 382
Contractile cardiac grafts using a novel nanofibrous mesh
Shin, M., Ishii, O., Sueda, T., & Vacanti, J. P. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.055 · Cited by 359
Li, M., Mondrinos, M. J., Chen, X., Gandhi, M. R., Ko, F. K., & Lelkes, P. I. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30833 · Cited by 358
Ngiam, M., Liao, S., Patil, A. J., Cheng, Z., Chan, C. K., & Ramakrishna, S. (2009) · Bone · doi:10.1016/j.bone.2009.03.674 · Cited by 341
Self-citationConductive Core–Sheath Nanofibers and Their Potential Application in Neural Tissue Engineering
Xie, J., MacEwan, M. R., Willerth, S. M., Li, X., Moran, D. W., Sakiyama‐Elbert, S. E., & Xia, Y. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801904 · Cited by 321
Ghasemi-Mobarakeh, L., Prabhakaran, M. P., Morshed, M., Nasr-Esfahani, M. H., & Ramakrishna, S. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0689 · Cited by 318
Self-citationGomez, N., & Schmidt, C. E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31047 · Cited by 306
Robinson, T. F., Cohen‐Gould, L., & Factor, S. M. (1983) · PubMed · Cited by 236
Carboxylic Acid-Functionalized Conductive Polypyrrole as a Bioactive Platform for Cell Adhesion
Lee, J.-W., Serna, F., Nickels, J., & Schmidt, C. E. (2006) · Biomacromolecules · doi:10.1021/bm060220q · Cited by 227
Gilmore, K. J., Kita, M., Han, Y., Gelmi, A., Higgins, M. J., Moulton, S. E., Clark, G. M., Kapsa, R., & Wallace, G. G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.059 · Cited by 225
Eghbali, M., & Weber, K. (1990) · Molecular and Cellular Biochemistry · doi:10.1007/bf00228448 · Cited by 195
Cardiac Tissue Engineering for Replacement Therapy
Zimmermann, W.-H., & Eschenhagen, T. (2003) · Heart Failure Reviews · doi:10.1023/a:1024725818835 · Cited by 179
The regulation of cell functions electrically using biodegradable polypyrrole–polylactide conductors
Shi, G., Zhang, Z., & Rouabhia, M. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.06.010 · Cited by 151
Armiñán, A., Gandía, C., Bartual, M., García‐Verdugo, J. M., Lledó, E., Mirabet, V., Llop-Miguel, M., Barea, J., Montero, J., & Sepúlveda, P. (2008) · Stem Cells and Development · doi:10.1089/scd.2008.0292 · Cited by 149
Yang, M.-C., Wang, S., Chou, N., Chi, N., Huang, Y., Chang, Y.-L., Shieh, M.-J., & Chung, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.057 · Cited by 144
Ma, K., Chan, C. K., Liao, S., Hwang, W. Y. K., Feng, Q., & Ramakrishna, S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.024 · Cited by 141
Self-citationThe effect of polypyrrole on arteriogenesis in an acute rat infarct model
Mihardja, S. S., Sievers, R. E., & Lee, R. J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.07.021 · Cited by 125
Castano‐Izquierdo, H., O’Rear, E. A., McFetridge, P. S., & Sikavitsas, V. I. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300123 · Cited by 121
Guided Three-Dimensional Growth of Functional Cardiomyocytes on Polyethylene Glycol Nanostructures
Kim, D., Kim, P., Song, I., Cha, J. M., Lee, S. H., Kim, B., & Suh, K. Y. (2006) · Langmuir · doi:10.1021/la060283u · Cited by 115
Rockwood, D. N., Akins, R. E., Parrag, I. C., Woodhouse, K. A., & Rabolt, J. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.08.034 · Cited by 110
Garner, B., Hodgson, A. J., Wallace, G. G., & Underwood, P. A. (1999) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008835925998 · Cited by 109
The pathophysiology of advanced heart failure
Baig, M. K., Mahon, N., McKenna, W. J., Caforio, A. L. P., Bonow, R. O., Francis, G. S., & Gheorghiade, M. (1998) · American Heart Journal · doi:10.1016/s0002-8703(98)70252-2 · Cited by 97
Motlagh, D., Hartman, T. J., Desai, T. A., & Russell, B. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10083 · Cited by 91
Design of an amperometric biosensor using polypyrrole-microgel composites containing glucose oxidase
Rubio‐Retama, J., Cabarcos, E. L., Mecerreyes, D., & López-Ruíz, B. (2004) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2004.05.018 · Cited by 89
Electrical Conductivity and Permittivity of Murine Myocardium
Raghavan, K., Porterfield, J. E., Kottam, A. T. G., et al. (2009) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2009.2012401 · Cited by 71
Ota, T., Gilbert, T. W., Badylak, S. F., SCHWARTZMAN, D. S., & Zenati, M. A. (2007) · Journal of Thoracic and Cardiovascular Surgery · doi:10.1016/j.jtcvs.2006.11.035 · Cited by 44
Multimodal biomaterial strategies for regeneration of infarcted myocardium
Mukherjee, S., Venugopal, J. R., Ravichandran, R., Ramakrishna, S., & Raghunath, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00805b · Cited by 26
Self-citation
Cited by
Conductive Polymers: Opportunities and Challenges in Biomedical Applications
Nezakati, T., Seifalian, A., Tan, A., & Seifalian, A. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00275 · Cited by 977
Biodegradable and electrically conducting polymers for biomedical applications
Guo, B., Glavas, L., & Albertsson, A.-C. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.003 · Cited by 592
Dong, R., Zhao, X., Guo, B., & Ma, P. X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b04911 · Cited by 538
Wang, X.-X., Yu, G.-F., Zhang, J., Yu, M., Ramakrishna, S., & Long, Y.-Z. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100704 · Cited by 447
Self-citationNanotopography-guided tissue engineering and regenerative medicine
Kim, H. N., Jiao, A., Hwang, N. S., Kim, M. S., Kang, D. H., Kim, D.-H., & Suh, K.-Y. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.07.014 · Cited by 404
Metadata
- Authors
- Kai, D., Prabhakaran, M. P., Jin, G., & Ramakrishna, S.
- Venue
- Journal of Biomedical Materials Research Part A
- Publisher
- Wiley
- Published
- 2011-08-23
- Volume
- 99A
- Issue
- 3
- Pages
- 376-385
- ISSN
- 1549-3296 (ISSN-L)
- 1552-4965
- OpenAlex
- W2070057065
- Cited by
- 257
- References
- 42
- FWCI
- 2.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.