Favorable Thermoresponsive Shape Memory Effects of 3D Printed Poly(Lactic Acid)/Poly(ε‐Caprolactone) Blends Fabricated by Fused Deposition Modeling
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
The shape of 3D printed products can be transformed over time, achieving 4D printing. In this work, poly(lactic acid) (PLA)/poly(ε‐caprolactone) (PCL) blends are fabricated via fused deposition modeling (FDM). The thermoresponsive shape memory effects (SMEs) of 3D printed blends are investigated by stress‐controlled dynamic mechanical analysis in tension mode. The SME mechanism is clarified in detail, along with the crystallization and melting behaviors, dynamic mechanical properties, and morphologies of PLA/PCL blends. It is confirmed that the crystallinity of reversible phase PCL, the glass transition behavior of fixed phase PLA and the two‐phase interfaces have important effects on the shape memory performance. Furthermore, the SME can be tuned by optimizing printing parameters. The 3D printed product fabricated with raster angle of 45°/−45°, infill density of 80%, and layer thickness of 0.05 mm exhibits a favorable SME at the deformation temperature of 65 °C. Shape memory products fabricated via FDM technology have great application potential for 4D printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
A review of shape memory polymer composites and blends
Meng, Q., & Hu, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.08.011 · Cited by 609
Adaptive metamaterials by functionally graded 4D printing
Bodaghi, M., Damanpack, A. R., & Liao, W. H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.069 · Cited by 302
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Strong synergistic effects in PLA/PCL blends: impact of PLA matrix viscosity
Ostafinska, A., Fortelný, I., Hodan, J., Krejčíková, S., Nevoralová, M., Kredatusová, J., Kruliš, Z., Kotek, J., & Šlouf, M. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.015 · Cited by 118
Cited by
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Development and characterization of PLA/PCL blend filaments and 3D printed scaffolds
Eryildiz, M., Karakus, A., & Altan Eksi, M. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-10247-6 · Cited by 27
Eryildiz, M., Karakus, A., Demirci, M., Altintas Kadirhan, O., & Eksi Altan, M. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70133 · Cited by 25
Ivanov, E., Kotsilkova, R., Georgiev, V., Batakliev, T., & Angelov, V. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9020035 · Cited by 15
Batakliev, T., Georgiev, V., Ivanov, E., Angelov, V., & Kotsilkova, R. (2025) · Processes · doi:10.3390/pr13051328 · Cited by 6
Metadata
- Authors
- Liu, H., He, H., & Huang, B.
- Venue
- Macromolecular Materials and Engineering
- Publisher
- Wiley
- Published
- 2020-09-13
- Volume
- 305
- Issue
- 11
- ISSN
- 1438-7492 (ISSN-L)
- 1439-2054
- OpenAlex
- W3086780545
- Cited by
- 61
- References
- 10
- FWCI
- 3.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Favorable Thermoresponsive Shape Memory Effects of 3D Printed Poly(Lactic Acid)/Poly(ε‐Caprolactone) Blends Fabricated by Fused Deposition Modeling. https://app.cochat.ai/papers/10.1002/mame.202000295
- The paper
- Liu, H., He, H., & Huang, B. (2020). Favorable Thermoresponsive Shape Memory Effects of 3D Printed Poly(Lactic Acid)/Poly(ε‐Caprolactone) Blends Fabricated by Fused Deposition Modeling. Macromolecular Materials and Engineering. https://doi.org/10.1002/mame.202000295
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.