The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
Abstract
Optically pure polylactides, poly(L‐lactide) (PLLA) and poly(D‐lactide) (PDLA), were blended across the range of compositions with poly(ε‐caprolactone) (PCL) to study their crystallization, morphology, and mechanical behavior. Differential scanning calorimetry and dynamic mechanical analysis (DMA) of the PLA/PCL blends showed two Tg s at positions close to the pure components revealing phase separation. However, a shift in the tan δ peak position by DMA from 64 to 57°C suggests a partial solubility of PCL in the PLA‐rich phase. Scanning electron microscopy reveals phase separation and a transition in the phase morphology from spherical to interconnected domains as the equimolar blend approaches from the outermost compositions. The spherulitic growth of both PLA and PCL in the blends was followed by polarized optical microscopy at 140 and 37°C. From tensile tests at speed of 50 mm/min Young's modulus values between 5.2 and 0.4 GPa, strength values between 56 and 12 MPa, and strain at break values between 1 and 400% were obtained varying the blend composition. The viscoelastic properties (E′ and tan δ) obtained at frequency of 1 Hz by DMA are discussed and are found consistent with composition, phase separation, and crystallization behavior of the blends. POLYM. ENG. SCI., 46:1299–1308, 2006. © 2006 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Influence of Diluent and of Copolymer Composition on the Glass Temperature of a Poly-mer System
Fox, T. (1956) · Medical Entomology and Zoology · Cited by 1,800
An introduction to the mechanical properties of solid polymers
(2004) · Choice Reviews Online · doi:10.5860/choice.42-2247 · Cited by 1,284
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Engelberg, I., & Kohn, J. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90037-b · Cited by 803
Crescenzi, V., Manzini, G., Calzolari, G., & Borri, C. (1972) · European Polymer Journal · doi:10.1016/0014-3057(72)90109-7 · Cited by 750
Paul, D. R. (1978) · Polymer Blends · doi:10.1016/b978-0-12-546802-2.50012-9 · Cited by 653
An introduction to the mechanical properties of solid polymers
(1994) · Choice Reviews Online · doi:10.5860/choice.31-4925 · Cited by 603
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Self-citationStructure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Keller, A. (1955) · Journal of Polymer Science · doi:10.1002/pol.1955.120178414 · Cited by 345
Reactive compatibilization of biodegradable blends of poly(lactic acid) and poly(ε-caprolactone)
Wang, L., Ma, W., Gross, R. A., & McCarthy, S. P. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00196-1 · Cited by 339
Twisting orientation and the role of transient states in polymer crystallization
Keith, H. D., & Padden, F. J. (1984) · Polymer · doi:10.1016/0032-3861(84)90264-7 · Cited by 339
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
Surgical applications of biodegradable polymers in human tissues
Vainionpää, S., Rokkanen, P., & Törmälä, P. (1989) · Progress in Polymer Science · doi:10.1016/0079-6700(89)90013-0 · Cited by 287
A practical guide to polymer miscibility
Coleman, M. M., Serman, C. J., Bhagwagar, D. E., & Painter, P. C. (1990) · Polymer · doi:10.1016/0032-3861(90)90208-g · Cited by 278
Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions
Schindler, A., & Harper, D. (1979) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1979.170170831 · Cited by 278
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249
Mechanical compatibilization of immiscible blends
Barlow, J. W., & Paul, D. R. (1984) · Polymer Engineering & Science · doi:10.1002/pen.760240804 · Cited by 221
Enzymatic degradation of poly(ε-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution
Gan, Z., Yu, D., Zhong, Z., Liang, Q., & Jing, X. (1999) · Polymer · doi:10.1016/s0032-3861(98)00549-7 · Cited by 217
Crystallinity and mechanical properties of optically pure polylactides and their blends
Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20331 · Cited by 214
Self-citationSarazin, P., Roy, X., & Favis, B. D. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.065 · Cited by 210
Tsuji, H., & Ikada, Y. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960627)60:13<2367::aid-app8>3.0.co;2-c · Cited by 202
Schindler, A., Hibionada, Y. M., & Pitt, C. G. (1982) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1982.170200206 · Cited by 193
Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S. (1998) · Macromolecules · doi:10.1021/ma9714629 · Cited by 187
Yang, J.-M., Chen, H.-L., You, J.-W., & Hwang, J. C. (1997) · Polymer Journal · doi:10.1295/polymj.29.657 · Cited by 163
Stereo block copolymers of L‐ and D‐lactides
Yui, N., Dijkstra, P. J., & Feijen, J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910303 · Cited by 151
Aslan, S., Calandrelli, L., Laurienzo, P., Malinconico, M., & Migliaresi, C. (2000) · Journal of Materials Science · doi:10.1023/a:1004787326273 · Cited by 123
LCST phase separation in biodegradable polymer blends: poly(D,L-lactide) and poly(-caprolactone)
Meredith, J. C., & Amis, E. J. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(20000301)201:6<733::aid-macp733>3.0.co;2-5 · Cited by 122
Urayama, H., Moon, S., & Kimura, Y. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200390006 · Cited by 114
On the chain stiffness of poly(lactide)s
Joziasse, C. A. P., Veenstra, H., Grijpma, D. W., & Pennings, A. J. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970713 · Cited by 112
Morphology-property relationships in polycarbonate-based blends. I. Modulus
Kunori, T., & Geil, P. H. (1980) · Journal of Macromolecular Science Part B · doi:10.1080/00222348008241375 · Cited by 109
Tsuji, H., Yamada, T., Suzuki, M., & Itsuno, S. (2003) · Polymer International · doi:10.1002/pi.1093 · Cited by 101
Biodegradable Polymers for Orthopedic Applications
Zhang, X., Mattheus, Goosen, M. F. A., Wyss, S. P., & Pichora, D. R. (1993) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15321799308021434 · Cited by 89
Sarasua, J.-R., & Pouyet, J. (1998) · Journal of Thermoplastic Composite Materials · doi:10.1177/089270579801100101 · Cited by 60
Self-citationCracking in polylactide spherulites
Fraschini, C., Plesu, R., Sarasua, J., & Prud'homme, R. E. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20616 · Cited by 37
Self-citation
Research works printed but not linked: 3
- 10.1016/0032-3861(93)90706-G · doi:10.1016/0032-3861(93)90706-g
- 10.1016/S0032-3861(01)00377-9 · doi:10.1016/s0032-3861(01)00377-9
- Fox T.G., 1956, Bull. Am. Phys. Soc., 1, 123
Cited by
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Metadata
- Authors
- López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2006-07-28
- Volume
- 46
- Issue
- 9
- Pages
- 1299-1308
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2023610485
- Cited by
- 289
- References
- 36
- FWCI
- 5.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.