The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
Abstract
Optically pure polylactides, poly(L‐lactide) (PLLA) and poly(D‐lactide) (PDLA), were blended across the range of compositions with poly(ε‐caprolactone) (PCL) to study their crystallization, morphology, and mechanical behavior. Differential scanning calorimetry and dynamic mechanical analysis (DMA) of the PLA/PCL blends showed two Tg s at positions close to the pure components revealing phase separation. However, a shift in the tan δ peak position by DMA from 64 to 57°C suggests a partial solubility of PCL in the PLA‐rich phase. Scanning electron microscopy reveals phase separation and a transition in the phase morphology from spherical to interconnected domains as the equimolar blend approaches from the outermost compositions. The spherulitic growth of both PLA and PCL in the blends was followed by polarized optical microscopy at 140 and 37°C. From tensile tests at speed of 50 mm/min Young's modulus values between 5.2 and 0.4 GPa, strength values between 56 and 12 MPa, and strain at break values between 1 and 400% were obtained varying the blend composition. The viscoelastic properties (E′ and tan δ) obtained at frequency of 1 Hz by DMA are discussed and are found consistent with composition, phase separation, and crystallization behavior of the blends. POLYM. ENG. SCI., 46:1299–1308, 2006. © 2006 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Influence of Diluent and of Copolymer Composition on the Glass Temperature of a Poly-mer System
Fox, T. (1956) · Medical Entomology and Zoology · Cited by 1,800
An introduction to the mechanical properties of solid polymers
(2004) · Choice Reviews Online · doi:10.5860/choice.42-2247 · Cited by 1,284
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Engelberg, I., & Kohn, J. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90037-b · Cited by 803
Crescenzi, V., Manzini, G., Calzolari, G., & Borri, C. (1972) · European Polymer Journal · doi:10.1016/0014-3057(72)90109-7 · Cited by 750
Paul, D. R. (1978) · Polymer Blends · doi:10.1016/b978-0-12-546802-2.50012-9 · Cited by 653
An introduction to the mechanical properties of solid polymers
(1994) · Choice Reviews Online · doi:10.5860/choice.31-4925 · Cited by 603
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Self-citationStructure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Research works printed but not linked: 3
- 10.1016/0032-3861(93)90706-G · doi:10.1016/0032-3861(93)90706-g
- 10.1016/S0032-3861(01)00377-9 · doi:10.1016/s0032-3861(01)00377-9
- Fox T.G., 1956, Bull. Am. Phys. Soc., 1, 123
Cited by
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend
Wu, D., Zhang, Y., Zhang, M., & Yu, W. (2009) · Biomacromolecules · doi:10.1021/bm801183f · Cited by 372
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Navarro-Baena, I., Sessini, V., Dominici, F., Torre, L., Kenny, J. M., & Peponi, L. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.03.037 · Cited by 303
Electrospun Polycaprolactone (PCL) Degradation: An In Vitro and In Vivo Study
Dias, J. R., Sousa, A., Augusto, A., Bártolo, P. J., & Granja, P. L. (2022) · Polymers · doi:10.3390/polym14163397 · Cited by 293
Structure and properties of polylactide/natural rubber blends
Bitinis, N., Verdejo, R., Cassagnau, P., & Lopez-Manchado, M. A. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.05.016 · Cited by 274
Toughening modification of PLLA/PBS blends via in situ compatibilization
Wang, R., Wang, S., Zhang, Y., Wan, C., & Ma, P. (2009) · Polymer Engineering & Science · doi:10.1002/pen.21210 · Cited by 266
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review
Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217
Self-citationOstafinska, A., Fortelny, I., Nevoralova, M., Hodan, J., Kredatusova, J., & Slouf, M. (2015) · RSC Advances · doi:10.1039/c5ra21178f · Cited by 176
Botlhoko, O. J., Ramontja, J., & Ray, S. S. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.05.025 · Cited by 81
Xiao, X., Chevali, V. S., Song, P., Yu, B., Yang, Y., & Wang, H. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100385 · Cited by 60
PCL-Based Shape Memory Polymer Semi-IPNs: The Role of Miscibility in Tuning the Degradation Rate
Pfau, M. R., McKinzey, K. G., Roth, A. A., & Grunlan, M. A. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00454 · Cited by 58
Jikei, M., Takeyama, Y., Yamadoi, Y., Shinbo, N., Matsumoto, K., Motokawa, M., Ishibashi, K., & Yamamoto, F. (2015) · Polymer Journal · doi:10.1038/pj.2015.49 · Cited by 33
Ugartemendia, J. M., Larrañaga, A., Amestoy, H., Etxeberria, A., & Sarasua, J. R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.11.040 · Cited by 32
Self-citationFernández‐Tena, A., Otaegi, I., Irusta, L., Sebastián, V., Guerrica‐Echevarria, G., Müller, A. J., & Aranburu, N. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300213 · Cited by 34
Oosterbeek, R. N., Kwon, K.-A., Duffy, P., McMahon, S., Zhang, X. C., Best, S. M., & Cameron, R. E. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.109015 · Cited by 30
Larrañaga, A., Diamanti, E., Rubio, E., Palomares, T., Alonso-Varona, A., Aldazabal, P., Martin, F. J., & Sarasua, J. R. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.05.061 · Cited by 21
Self-citationLee, D., Lee, S. H., Cho, M. S., Nam, J. D., & Lee, Y. (2015) · Polymer International · doi:10.1002/pi.4848 · Cited by 18
Four-armed PCL-b-PDLA diblock copolymer: 1. Synthesis, crystallization and degradation
Ning, Z., Jiang, N., & Gan, Z. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.05.016 · Cited by 16
Karpova, S. G., Olkhov, A. A., Varyan, I. A., Khan, O. I., Botin, A. A., Naletova, A. V., Popov, A. A., & Iordanskii, A. L. (2024) · doi:10.20944/preprints202404.0063.v1 · Cited by 4
Metadata
- Authors
- López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2006-07-28
- Volume
- 46
- Issue
- 9
- Pages
- 1299-1308
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2023610485
- Cited by
- 289
- References
- 36
- FWCI
- 5.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.