The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
A review on degradation mechanisms of polylactic acid: Hydrolytic, photodegradative, microbial, and enzymatic degradation
Abstract
Recently, thoughtful disagreements between scientists concerning environmental issues including the use of renewable materials have enhanced universal awareness of the use of biodegradable materials. Polylactic acid (PLA) is one of the most promising biodegradable materials for commercially replacing nondegradable materials such as polyethylene terephthalate and polystyrene. The main advantages of PLA production over the conventional plastic materials is PLA can be produced from renewable resources such as corn or other carbohydrate sources. Besides, PLA provides adequate energy saving by consuming CO 2 during production. Thus, we aim to highlight recent research involving the investigation of properties of PLA, its applications and the four types of potential PLA degradation mechanisms. In the first part of the article, a brief discussion of the problems surrounding use of conventional plastic is provided and examples of biodegradable polymers currently used are provided. Next, properties of PLA, and (Poly[L‐lactide]), (Poly[D‐lactide]) (PDLA) and (Poly[DL‐lactide]) and application of PLA in various industries such as in packaging, transportation, agriculture and the biomedical, textile and electronic industry are described. Behaviors of PLA subjected to hydrolytic, photodegradative, microbial and enzymatic degradation mechanisms are discussed in detail in the latter portion of the article.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Accumulation and fragmentation of plastic debris in global environments
Barnes, D. K. A., Galgani, F., Thompson, R. C., & Barlaz, M. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0205 · Cited by 6,126
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review
Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500087z · Cited by 1,398
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Hydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Biodegradable and compostable alternatives to conventional plastics
Song, J. H., Murphy, R. J., Narayan, R., & Davies, G. B. H. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0289 · Cited by 971
Anjum, A., Zuber, M., Zia, K. M., Noreen, A., Anjum, M. N., & Tabasum, S. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.069 · Cited by 665
Biodegradation of PET: Current Status and Application Aspects
Taniguchi, I., Yoshida, S., Hiraga, K., Miyamoto, K., Kimura, Y., & Oda, K. (2019) · ACS Catalysis · doi:10.1021/acscatal.8b05171 · Cited by 646
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review
Karamanlioglu, M., Preziosi, R., & Robson, G. D. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.009 · Cited by 636
Application of bioplastics for food packaging
Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2013.06.003 · Cited by 615
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Poly(lactic acid) nanofibrous scaffolds for tissue engineering
Santoro, M., Shah, S. R., Walker, J. L., & Mikos, A. G. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.019 · Cited by 485
New advances in the biodegradation of Poly(lactic) acid
Qi, X., Ren, Y., & Wang, X. (2017) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.01.010 · Cited by 462
Poly (Lactic Acid) Production for Tissue Engineering Applications
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.534 · Cited by 457
Gene-Expressing Liposomes as Synthetic Cells for Molecular Communication Studies
Rampioni, G., D'Angelo, F., Leoni, L., & Stano, P. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00001 · Cited by 446
Enzymic Hydrolysis of Polylactic Acid
Williams, D. F. (1981) · Engineering in Medicine · doi:10.1243/emed_jour_1981_010_004_02 · Cited by 356
Bioplastics and petroleum-based plastics: Strengths and weaknesses
Gironi, F., & Piemonte, V. (2011) · Energy Sources, Part A: Recovery, Utilization, and Environmental Effects · doi:10.1080/15567030903436830 · Cited by 340
Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 335
A Review of Poly(Lactic Acid)‐Based Materials for Antimicrobial Packaging
Tawakkal, I. S. M. A., Cran, M. J., Miltz, J., & Bigger, S. W. (2014) · Journal of Food Science · doi:10.1111/1750-3841.12534 · Cited by 309
An overview of Polymeric Materials for Automotive Applications
Patil, A., Patel, A., & Purohit, R. (2017) · Materials Today: Proceedings · doi:10.1016/j.matpr.2017.02.278 · Cited by 292
Hajiali, F., Tajbakhsh, S., & Shojaei, A. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1332640 · Cited by 267
Mini-Review: Biosynthesis of Poly(hydroxyalkanoates)
Lu, J., Tappel, R. C., & Nomura, C. T. (2009) · Polymer Reviews · doi:10.1080/15583720903048243 · Cited by 254
Xiong, Z., Yang, Y., Feng, J., Zhang, X., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.09.007 · Cited by 222
Yang, C., Zhang, W., Liu, R., Li, Q., Li, B., Wang, S., Song, C., Qiao, C., & Mulchandani, A. (2011) · Environmental Science & Technology · doi:10.1021/es2010545 · Cited by 204
Wang, G., Zhang, D., Wan, G., Li, B., & Zhao, G. (2019) · Polymer · doi:10.1016/j.polymer.2019.121803 · Cited by 199
Gupta, A., Simmons, W., Schueneman, G. T., Hylton, D., & Mintz, E. A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02458 · Cited by 197
Properties of linear poly(lactic acid)/polyethylene glycol blends
Sungsanit, K., Kao, N., & Bhattacharya, S. N. (2012) · Polymer Engineering & Science · doi:10.1002/pen.22052 · Cited by 196
Yang, L., Li, S., Zhou, X., Liu, J., Li, Y., Yang, M., Yuan, Q., & Zhang, W. (2019) · Synthetic Metals · doi:10.1016/j.synthmet.2019.05.008 · Cited by 179
Wang, G., Zhang, D., Li, B., Wan, G., Zhao, G., & Zhang, A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.02.020 · Cited by 177
Avinc, O., & Khoddami, A. (2009) · Fibre Chemistry · doi:10.1007/s10692-010-9213-z · Cited by 175
Ndazi, B. S., & Karlsson, S. (2011) · Express Polymer Letters · doi:10.3144/expresspolymlett.2011.13 · Cited by 166
Laccase‐catalyzed synthesis of conducting polyaniline‐lignosulfonate composite
Zhang, Y., Dong, A., Fan, X., Wang, Q., Zhang, Y., Yu, Y., & Cavaco‐Paulo, A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.42941 · Cited by 165
Effect of TiO2 nanoparticles on the long-term hydrolytic degradation behavior of PLA
Luo, Y., Wang, X., & Wang, Y. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.02.011 · Cited by 163
Castro‐Aguirre, E., Auras, R. A., Selke, S. E. M., Rubino, M. I., & Marsh, T. L. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.017 · Cited by 161
Marine-degradable polylactic acid
Martin, R. T., Camargo, L. P., & Miller, S. A. (2014) · Green Chem. · doi:10.1039/c3gc42604a · Cited by 160
Overview of Poly(lactic acid) (PLA) fibre
Avinç, O., & Khoddamı, A. (2010) · Fibre Chemistry · doi:10.1007/s10692-010-9226-7 · Cited by 152
A study on the degradation of polylactic acid in the presence of phosphonium ionic liquids
Park, K. I., & Xanthos, M. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.01.030 · Cited by 149
Yagi, H., Ninomiya, F., Funabashi, M., & Kunioka, M. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.08.031 · Cited by 146
Bubpachat, T., Sombatsompop, N., & Prapagdee, B. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.03.023 · Cited by 143
Polylactic acid trays for fresh-food packaging: A Carbon Footprint assessment
Ingrao, C., Tricase, C., Cholewa-Wójcik, A., Kawecka, A. K., Rana, R. L., & Siracusa, V. (2015) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2015.08.023 · Cited by 140
Mascheroni, E., Guillard, V., Nalin, F., Mora, L., & Piergiovanni, L. (2010) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2009.12.028 · Cited by 138
Polylactic acid as a biodegradable material for all-solution-processed organic electronic devices
Mattana, G., Briand, D., Marette, A., Quintero, A. V., & de Rooij, N. F. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.11.010 · Cited by 137
Yoon, J. T., Jeong, Y. G., Lee, S. C., & Min, B. G. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1312 · Cited by 132
Electrospun PCL/GO-g-PEG structures: Processing-morphology-properties relationships
Scaffaro, R., Lopresti, F., Maio, A., et al. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.11.005 · Cited by 132
Kramschuster, A., & Turng, L. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31523 · Cited by 131
Biodegradation of poly(l-lactide) (PLA) exposed to UV irradiation by a mesophilic bacterium
Jeon, H. J., & Kim, M.-N. (2013) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2013.08.013 · Cited by 127
Castro‐Aguirre, E., Auras, R. A., Selke, S. E. M., Rubino, M. I., & Marsh, T. L. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.05.017 · Cited by 127
Biodegradation of polylactic acid (PLA) fibers using different enzymes
Lee, S., Kim, I. Y., & Song, W. S. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2107-9 · Cited by 125
Neocollagenesis in human tissue injected with a polycaprolactone-based dermal filler
Kim, J. A., & van Abel, D. (2014) · Journal of Cosmetic and Laser Therapy · doi:10.3109/14764172.2014.968586 · Cited by 123
Ngaowthong, C., Borůvka, M., Běhálek, L., Lenfeld, P., Švec, M., Dangtungee, R., Siengchin, S., Rangappa, S. M., & Parameswaranpillai, J. (2019) · Waste Management · doi:10.1016/j.wasman.2019.07.038 · Cited by 123
Pradhan, R. R., Misra, M., Erickson, L. R., & Mohanty, A. K. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.053 · Cited by 121
Xiong, Z., Li, C., Ma, S., Feng, J., Yang, Y., Zhang, R., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.054 · Cited by 121
Belbachir, S., Zaïri, F., Ayoub, G. Y., Maschke, U., Naït‐Abdelaziz, M., Gloaguen, J. M., Benguediab, M., & Lefebvre, J. M. (2009) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2009.10.003 · Cited by 120
Kawai, F., Nakadai, K., Nishioka, E., et al. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.03.022 · Cited by 118
Identification of important abiotic and biotic factors in the biodegradation of poly(l-lactic acid)
Husárová, L., Pekařová, S., Stloukal, P., Kucharzcyk, P., Verney, V., Commereuc, S., Ramoné, A., & Koutný, M. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.04.050 · Cited by 110
Fungal Degradation of Poly(l-lactide) in Soil and in Compost
Saadi, Z., Rasmont, A., César, G., Bewa, H., & Benguigui, L. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0399-9 · Cited by 107
PLA-TiO2 nanocomposites: Thermal, morphological, structural, and humidity sensing properties
Mallick, S., Ahmad, Z., Touati, F., Bhadra, J., Shakoor, A., & Al-Thani, N. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.06.068 · Cited by 107
Apinya, T., Sombatsompop, N., & Prapagdee, B. (2015) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2015.01.001 · Cited by 104
Biodegradation of poly(lactic acid) and some of its based systems with Trichoderma viride
Lipşa, R., Tudorachi, N., Darie-Niță, R. N., Oprica, L. A., Vasile, C., & Chiriac, A. P. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.017 · Cited by 103
Brandelero, R. P. H., Grossmann, M. V. E., & Yamashita, F. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.045 · Cited by 102
Natural weathering properties of acetylated bamboo plastic composites
Hung, K., Chen, Y.-L., & Wu, J. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.016 · Cited by 102
Pattanasuttichonlakul, W., Sombatsompop, N., & Prapagdee, B. (2018) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2018.05.014 · Cited by 102
Poly(lactic acid) based hydrogels: formation, characteristics and biomedical applications
Munim, S. A., & Raza, Z. A. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0687-z · Cited by 102
Ahn, H., Huda, M. S., Smith, M. C., Mulbry, W. W., Schmidt, W., & Reeves, J. B. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.01.042 · Cited by 101
Poly(Ethylene Glycol) as a Compatibilizer for Poly(Lactic Acid)/Thermoplastic Starch Blends
Ferrarezi, M. M. F., Taipina, M. D. O., da Silva, L. C. E., & Gonçalves, M. D. C. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0480-z · Cited by 100
Thermal degradation and physical aging of poly(lactic acid) and its blends with starch
Acioli‐Moura, R., & Sun, X. S. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21019 · Cited by 95
Jost, V. (2015) · Chemical and Biochemical Engineering Quarterly · doi:10.15255/cabeq.2014.2257 · Cited by 91
Xiong, Z., Zhang, L., Ma, S., Yang, Y., Zhang, C., Tang, Z., & Zhu, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.01.038 · Cited by 91
Satti, S. M., Shah, A. A., Auras, R. A., & Marsh, T. L. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.08.023 · Cited by 87
Ostrowska, J., Sadurski, W., Paluch, M., Tyński, P., & Bogusz, J. (2019) · Polymer International · doi:10.1002/pi.5814 · Cited by 85
Limsukon, W., Auras, R. A., & Selke, S. E. M. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106108 · Cited by 84
Ranjbar‐Mohammadi, M., Prabhakaran, M. P., Bahrami, S. H., & Ramakrishna, S. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.012 · Cited by 78
Utilization of peanut shell powder as a novel filler in natural rubber
Sareena, C., Ramesan, M. T., & Purushothaman, E. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36468 · Cited by 77
Bioplastics from agro-wastes for food packaging applications
de Moura, I. G., de Sá, A. V., Abreu, A. S. L. M., & Machado, A. V. A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804302-8.00007-8 · Cited by 77
Singla, R. K., Zafar, M. T., Maiti, S. N., & Ghosh, A. K. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.08.042 · Cited by 77
Wu, Y., Wang, H., Qiu, Y., & Loh, X. J. (2016) · RSC Advances · doi:10.1039/c6ra08022g · Cited by 74
Sukkhum, S., Tokuyama, S., Tamura, T., & Kitpreechavanich, V. (2009) · The Journal of General and Applied Microbiology · doi:10.2323/jgam.55.459 · Cited by 72
Hanphakphoom, S., Maneewong, N., Sukkhum, S., Tokuyama, S., & Kitpreechavanich, V. (2014) · The Journal of General and Applied Microbiology · doi:10.2323/jgam.60.13 · Cited by 69
Polylactic Acid (PLA)-Degrading Microorganisms and PLA Depolymerases
Kawai, F. (2010) · ACS symposium series · doi:10.1021/bk-2010-1043.ch027 · Cited by 68
The Role of Microbes in Plastic Degradation
Devi, R. S., Kannan, V. R., Natarajan, K. K., Duraisamy, N., Kannan, K., Chandru, S., & Antony, A. R. (2015) · CRC Press eBooks · doi:10.1201/b19243-16 · Cited by 68
Development of Polymeric Functionally Graded Scaffolds: A Brief Review
Scaffaro, R., Lopresti, F., Maio, A., Sutera, F., & Botta, L. (2016) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000332 · Cited by 66
Tsuji, H. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch21 · Cited by 65
Ellis, L. B. M., & Wackett, L. P. (2012) · Microbial Informatics and Experimentation · doi:10.1186/2042-5783-2-1 · Cited by 63
Iñiguez‐Franco, F., Auras, R. A., Rubino, M. I., Dolan, K. D., Soto‐Valdez, H., & Selke, S. E. M. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.11.004 · Cited by 61
Degradation Behaviors of Different Blends of Polylactic Acid Buried in Soil
Chuensangjun, C., Pechyen, C., & Sirisansaneeyakul, S. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.735 · Cited by 57
Zhu, L., Qiu, J., Liu, W., & Sakai, E. (2019) · Composites Communications · doi:10.1016/j.coco.2019.02.001 · Cited by 57
A Review on Peanut Shell Powder Reinforced Polymer Composites
Zaaba, N. F., & Ismail, H. (2018) · Polymer-Plastics Technology and Materials · doi:10.1080/03602559.2018.1471720 · Cited by 56
Self-citationPhoto-oxidative stabilization of carbon nanotubes on polylactic acid
Gorrasi, G., & Sorrentino, A. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.02.012 · Cited by 54
Effect of the orientation and rheological behaviour of biodegradable polymer nanocomposites
Mantia, F. P. L., Arrigo, R., & Morreale, M. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.02.007 · Cited by 54
Poly(Lactic Acid)-Based Nanobiocomposites with Modulated Degradation Rates
Iozzino, V., Askanian, H., Leroux, F., Verney, V., & Pantani, R. (2018) · Materials · doi:10.3390/ma11101943 · Cited by 54
Ozório, M. D. S., dos Reis, E. A. P., Teixeira, S. R., et al. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41466 · Cited by 53
Degradation of poly(L‐lactide) by a mesophilic bacterium
Kim, M. N., & Park, S. T. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31950 · Cited by 51
Neumann, I., Flores‐Sahagun, T. H. S., & Ribeiro, A. M. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.03.013 · Cited by 50
Extrusion blown films of poly(lactic acid) chain‐extended with food grade multifunctional epoxies
Karkhanis, S. S., & Matuana, L. M. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25224 · Cited by 46
Polylactic Acid Polymers from Corn. Applications in the Textiles Industry
Lunt, J., & SHAFER, R. L. (2000) · Journal of Industrial Textiles · doi:10.1106/lvy7-vbvf-v8lr-l5at · Cited by 45
Salač, J., Šerá, J., Jurča, M., Verney, V., Marek, A. A., & Koutný, M. (2019) · Materials · doi:10.3390/ma12030481 · Cited by 44
Water bamboo husk reinforced poly(lactic acid) green composites
Wang, K., Wu, T., Shih, Y., & Huang, C. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21151 · Cited by 43
Khalid, S., Yu, L. F., Meng, L., Liu, H., Ali, A., & Chen, L. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45504 · Cited by 42
Darie-Niță, R. N., Bodirlau, R., Teacă, C. A., Macyszyn, J., Kozłowski, M., & Spiridon, I. (2013) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2013.784936 · Cited by 38
Structure-properties relationships in melt reprocessed PLA/hydrotalcites nanocomposites
Scaffaro, R., Sutera, F., Mistretta, M. C., Botta, L., & Mantia, F. P. L. (2017) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2017.53 · Cited by 36
Lorenzo, M. L. D., Ovyn, R., Malinconico, M., Rubino, P., & Grohens, Y. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24058 · Cited by 35
Xiong, Z., Dai, X., Zhang, R., Tang, Z., Na, H., & Zhu, J. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500844m · Cited by 35
Ozdemir, E., Lekesiz, T. O., & Hacaloğlu, J. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.09.028 · Cited by 34
Mechanical Properties of Starch-Based Plastics
Chaléat, C. M., Halley, P. J., & Truss, R. W. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-53730-0.00023-3 · Cited by 33
Analysis of Natural fiber constituents: A Review
Manral, A., & Bajpai, P. K. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/455/1/012115 · Cited by 32
Lomthong, T., Hanphakphoom, S., Yoksan, R., & Kitpreechavanich, V. (2015) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2015.07.011 · Cited by 30
Yamoum, C., & Magaraphan, R. (2015) · Polymer Composites · doi:10.1002/pc.23627 · Cited by 30
Spiridon, I., Ursu, R. G., & Spiridon, I. A. (2015) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2015.1081131 · Cited by 29
A toughened PLA/Nanosilica composite obtained in the presence of epoxidized soybean oil
Xiong, Z., Dai, X., Na, H., Tang, Z., Zhang, R., & Zhu, J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41220 · Cited by 29
Admicellar Polymerization Coating of CNF Enhances Integration in Degradable Nanocomposites
Edlund, U., Lagerberg, T., & Ålander, E. M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01318 · Cited by 28
Shirahase, T., Komatsu, Y., Marubayashi, H., Tominaga, Y., Asai, S., & Sumita, M. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.04.003 · Cited by 25
Synthesis and purification of poly(l-lactic acid) using a one step benign process
Lee, S. Y., Valtchev, P., & Dehghani, F. (2012) · Green Chemistry · doi:10.1039/c2gc35074b · Cited by 25
Structural Characterization of Poly-L-lactic Acid (PLLA) and Poly(glycolic acid)(PGA) Oligomers
Casalini, T., Rossi, F., Santoro, M., & Perale, G. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12063857 · Cited by 22
Nanobiocomposites Based on Plasticized Starch
Avérous, L., & Pollet, É. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-53730-0.00028-2 · Cited by 22
Tu-morn, M., Pairoh, N., Sutapun, W., & Trongsatitkul, T. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.253 · Cited by 21
Panyachanakul, T., Kitpreechavanich, V., Tokuyama, S., & Krajangsang, S. (2017) · Electronic Journal of Biotechnology · doi:10.1016/j.ejbt.2017.09.001 · Cited by 20
Morphology Modification of Polyethylene/Clay Nanocomposite Samples under Convergent Flow
Mantia, F. P. L., Marino, R., & Dintcheva, N. T. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900066 · Cited by 18
Zaaba, N. F., Ismail, H., & Mariatti, M. (2017) · Polymer Composites · doi:10.1002/pc.24309 · Cited by 16
Self-citationNiaounakis, M. (2015) · Elsevier eBooks · doi:10.1016/b978-0-323-35399-1.00002-8 · Cited by 12
Cited by
Hierarchical-morphology metafabric for scalable passive daytime radiative cooling
Zeng, S., Pian, S., Su, M., Wang, Z., Wu, M., Liu, X., Chen, M., Xiang, Y., Wu, J., Zhang, M., et al. (2021) · Science · doi:10.1126/science.abi5484 · Cited by 1,135
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
Enzymes’ Power for Plastics Degradation
Tournier, V., Duquesne, S., Guillamot, F., Cramail, H., Taton, D., Marty, A., & André, I. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00644 · Cited by 590
Tyagi, P., Salem, K. S., Hubbe, M. A., & Pal, L. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.036 · Cited by 387
Polylactic acid synthesis, biodegradability, conversion to microplastics and toxicity: a review
Ali, W., Ali, H., Gillani, S., Zinck, P., & Souissi, S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01564-8 · Cited by 335
Metadata
- Authors
- Zaaba, N. F., & Jaafar, M.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2020-09
- Volume
- 60
- Issue
- 9
- Pages
- 2061-2075
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W3082996655
- Cited by
- 683
- References
- 123
- FWCI
- 16.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.