The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Ultrafine fibrous cellulose membranes from electrospinning of cellulose acetate
Abstract
Three solvents, that is, acetone, acetic acid, and dimethylacetamide (DMAc), with a range of solubility parameter δ, surface tension γ, viscosity η and boiling temperature were used to generate mixtures for electrospinning cellulose acetate (CA) (degree of substitution, DS = 2.45). Although none of these solvents alone enables continuous formation of fibers, mixing DMAc with either acetone or acetic acid produced suitable solvent systems. The 2:1 acetone:DMAc mixture is the most versatile mixture because it allows CA in the 12.5–20% concentration range to be continuously electrospun into fibrous membranes. These CA solutions have η between 1.2 and 10.2 poise and γ around 26 dyne/cm and produce smooth fibers with diameters from 100 nm to ∼1 μm. Fiber sizes generally decrease with decreasing CA concentrations. The nature of the collectors affects the morphology as well as packing of fibers. Fibers collected on paper have more uniform sizes, smooth surfaces, and fewer defects, whereas fibers collected on water are more varied in size. Electrically conductive solid collectors, such as Al foil and water, favor more tightly packed and less porous membranes. Porous collectors, like paper and copper mesh, produce highly porous membranes. The pores in membranes collected on the Al foil and paper are much better interconnected in the planar directions than those in membranes collected on water. There is evidence that electrospinning induces order in the fibers. Deacetylation of CA membranes is more efficient and complete in NaOH/ethanol than in aqueous NaOH, producing DS values between 0.15 and 2.33 without altering fiber surfaces, packing, or organization. The fully regenerated cellulose membranes are similarly hydrophilic as commodity cellulose fibrous matrices but absorb nearly 10 times as much water. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2119–2129, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
The effect of processing variables on the morphology of electrospun nanofibers and textiles
Deitzel, J. M., Kleinmeyer, J., Harris, D., & Beck Tan, N. C. (2001) · Polymer · doi:10.1016/s0032-3861(00)00250-0 · Cited by 2,915
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
Processing and microstructural characterization of porous biocompatible protein polymer thin films
Buchko, C. J., Chen, L. C., Shen, Y., & Martin, D. C. (1999) · Polymer · doi:10.1016/s0032-3861(98)00866-0 · Cited by 714
Transparent Nanocomposites with Ultrathin, Electrospun Nylon-4,6 Fiber Reinforcement
Bergshoef, M. M., & Vancso, G. J. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199911)11:16<1362::aid-adma1362>3.0.co;2-x · Cited by 514
Larrondo, L., & St. John Manley, R. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180190601 · Cited by 490
Structure Formation in Polymeric Fibers
(2001) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9783446456808 · Cited by 262
Larrondo, L., & St. John Manley, R. (1981) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1981.180190602 · Cited by 207
Cited by
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Electrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Functional electrospun nanofibrous scaffolds for biomedical applications
Liang, D., Hsiao, B. S., & Chu, B. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.021 · Cited by 972
Baji, A., Mai, Y.-W., Wong, S.-C., Abtahi, M., & Chen, P. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.01.010 · Cited by 877
Gupta, P., Elkins, C., Long, T. E., & Wilkes, G. L. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.021 · Cited by 834
Study on morphology of electrospun poly(vinyl alcohol) mats
Zhang, C., Yuan, X., Wu, L., Han, Y., & Sheng, J. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.10.027 · Cited by 829
A Review: Electrospinning of Biopolymer Nanofibers and their Applications
Schiffman, J. D., & Schauer, C. L. (2008) · Polymer Reviews · doi:10.1080/15583720802022182 · Cited by 820
Characterization of gelatin nanofiber prepared from gelatin–formic acid solution
Ki, C. S., Baek, D. H., Gang, K. D., Lee, K. H., Um, I. C., & Park, Y. H. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.040 · Cited by 637
NANOFIBROUS MATERIALS AND THEIR APPLICATIONS
Burger, C., Hsiao, B. S., & Chu, B. (2006) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.36.011205.123537 · Cited by 622
Chemically and mechanically isolated nanocellulose and their self-assembled structures
Jiang, F., & Hsieh, Y.-L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.022 · Cited by 586
Self-citationMit‐uppatham, C., Nithitanakul, M., & Supaphol, P. (2004) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200400225 · Cited by 579
Electrospun cellulose nanofiber as affinity membrane
MA, Z., KOTAKI, M., & RAMAKRISHNA, S. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2005.04.044 · Cited by 563
Designing electrospun nanofiber mats to promote wound healing – a review
Rieger, K. A., Birch, N. P., & Schiffman, J. D. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20795a · Cited by 479
Design Strategies of Tissue Engineering Scaffolds with Controlled Fiber Orientation
Murugan, R., & Ramakrishna, S. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0078 · Cited by 415
Biodegradable polymers for electrospinning: Towards biomedical applications
Kai, D., Liow, S. S., & Loh, X. J. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.04.051 · Cited by 396
Review for application of electrospinning and electrospun nanofibers technology in textile industry
Mirjalili, M., & Zohoori, S. (2016) · Journal of Nanostructure in Chemistry · doi:10.1007/s40097-016-0189-y · Cited by 388
Cellulose acetate in fabrication of polymeric membranes: A review
Vatanpour, V., Pasaoglu, M. E., Barzegar, H., Teber, O. O., Kaya, R., Bastug, M., Khataee, A., & Koyuncu, I. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.133914 · Cited by 386
Casasola, R., Thomas, N. L., Trybala, A., & Georgiadou, S. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.032 · Cited by 382
Fabrication of blend biodegradable nanofibrous nonwoven mats via multi-jet electrospinning
Ding, B., Kimura, E., Sato, T., Fujita, S., & Shiratori, S. (2004) · Polymer · doi:10.1016/j.polymer.2004.01.026 · Cited by 372
Zhang, J., Liu, Z., Kong, Q., Zhang, C., Pang, S., Yue, L., Wang, X., Yao, J., & Cui, G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302290n · Cited by 368
Taepaiboon, P., Rungsardthong, U., & Supaphol, P. (2007) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.03.018 · Cited by 350
Fabrication, Functionalization, and Application of Electrospun Biopolymer Nanofibers
Kriegel, C., Arrechi, A., Kit, K., McClements, D. J., & Weiss, J. (2008) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408390802241325 · Cited by 336
Structural studies of electrospun cellulose nanofibers
Kim, C.-W., Kim, D.-S., Kang, S.-Y., Marquez, M., & Joo, Y. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.05.033 · Cited by 332
Pectins functionalized biomaterials; a new viable approach for biomedical applications: A review
Noreen, A., Nazli, Z.-I.-H., Akram, J., Rasul, I., Mansha, A., Yaqoob, N., Iqbal, R., Tabasum, S., Zuber, M., & Zia, K. M. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.029 · Cited by 330
Cellulose acetate electrospun nanofibers for drug delivery systems: Applications and recent advances
Khoshnevisan, K., Maleki, H., Samadian, H., Shahsavari, S., Sarrafzadeh, M. H., Larijani, B., Dorkoosh, F. A., Haghpanah, V., & Khorramizadeh, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.072 · Cited by 329
Functional cardiac cell constructs on cellulose-based scaffolding
Entcheva, E., Bien, H., Yin, L., Chung, C.-Y., Farrell, M., & Kostov, Y. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.024 · Cited by 327
Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine
Qasim, S., Zafar, M., Najeeb, S., Khurshid, Z., Shah, A., Husain, S., & Rehman, I. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19020407 · Cited by 327
Preparation and Characterisation of Super‐Hydrophobic Surfaces
Crick, C. R., & Parkin, I. P. (2010) · Chemistry – A European Journal · doi:10.1002/chem.200903335 · Cited by 326
Bölgen, N., Menceloğlu, Y. Z., Acatay, K., Vargel, İ., & Pişkin, E. (2005) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856205774576655 · Cited by 311
Suwantong, O., Opanasopit, P., Ruktanonchai, U., & Supaphol, P. (2007) · Polymer · doi:10.1016/j.polymer.2007.11.019 · Cited by 304
Electrospinning Cellulose and Cellulose Derivatives
Frey, M. W. (2008) · Polymer Reviews · doi:10.1080/15583720802022281 · Cited by 296
Choi, H. Y., Bae, J. H., Hasegawa, Y., An, S., Kim, I. S., Lee, H., & Kim, M. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115881 · Cited by 293
Nanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter
Tungprapa, S., Puangparn, T., Weerasombut, M., Jangchud, I., Fakum, P., Semongkhol, S., Meechaisue, C., & Supaphol, P. (2007) · Cellulose · doi:10.1007/s10570-007-9113-4 · Cited by 265
Son, W. K., Youk, J. H., Lee, T. S., & Park, W. H. (2004) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10668 · Cited by 263
Tarus, B., Fadel, N., Al-Oufy, A., & El-Messiry, M. (2016) · Alexandria Engineering Journal · doi:10.1016/j.aej.2016.04.025 · Cited by 253
Electrospun polyacrylonitrile nanofibers modified by quaternary ammonium salts
Gliścińska, E., Gutarowska, B., Brycki, B., & Krucińska, I. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38210 · Cited by 42
Yang, M., Yu, S., Zhao, P., Shi, G., Guo, Y., Xie, L., Lyu, G., & Yu, J. (2023) · International Wound Journal · doi:10.1111/iwj.13910 · Cited by 13
Metadata
- Authors
- Liu, H., & Hsieh, Y.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2002-08-07
- Volume
- 40
- Issue
- 18
- Pages
- 2119-2129
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2093269401
- Cited by
- 669
- References
- 16
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.