Crystallization kinetics and melting of caprolactone random copolymers
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Spherulitic growth rates and overall rates of crystallization of poly(ε‐caprolactone‐co‐ε‐methyl‐ε‐caprolactone), poly(CL‐co‐MCL), were analyzed over a composition range from pure poly (ε‐caprolactone) (PCL) to a copolymer containing 40% MCL with an equation which contains the classical nucleation and transport terms, but adds an entropic factor to the nucleation term. Using this new equation, linear plots were obtained with slopes corresponding to the value of the nucleation parameter (KG 2) The experimental KG 2 value, (9.6 ± 0.5) × 10 4 K2, is independent of the comonomer content; also, the same KG 2 value is obtained from measurements of the overall rate of crystallization and from growth rate analysis. The interfacial free energy (σe) is 112 ± 5 erg/cm 2. The melting behavior of PCL and poly(CL‐co‐MCL) is also reported. Equilibrium melting temperatures were determined by the Hoffman‐Weeks extrapolation method. It was found, using the melting point depression method, that 71% of the MCL units are incorporated into the PCL crystals at equilibrium. According to the Z criterion proposed by Lauritzen, Regime II applies to the crystallization kinetics of all polymers investigated. Finally, the value of the Avrami parameter n is reported.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Structural Studies of Polyesters. III. Crystal Structure of Poly-ε-caprolactone
Chatani, Y., Okita, Y., Tadokoro, H., & Yamashita, Y. (1970) · Polymer Journal · doi:10.1295/polymj.1.555 · Cited by 305
Thermodynamics and Crystallization of Random Copolymers
Sanchez, I. C., & Eby, R. K. (1975) · Macromolecules · doi:10.1021/ma60047a012 · Cited by 288
Cited by
Confined crystallization of polymeric materials
Michell, R. M., & Müller, A. J. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.10.007 · Cited by 351
Polylactide–Poly(6-methyl-ε-caprolactone)–Polylactide Thermoplastic Elastomers
Martello, M. T., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma201063t · Cited by 137
Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers
Schneiderman, D. K., Hill, E. M., Martello, M. T., & Hillmyer, M. A. (2015) · Polymer Chemistry · doi:10.1039/c5py00202h · Cited by 101
Dolynchuk, O., Kolesov, I., Jehnichen, D., Reuter, U., Radusch, H.-J., & Sommer, J.-U. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00481 · Cited by 61
Wei, M., Shuai, X., & Tonelli, A. E. (2003) · Biomacromolecules · doi:10.1021/bm034078u · Cited by 56
Metadata
- Authors
- Goulet, L., & Prud'homme, R. E.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 1990-11
- Volume
- 28
- Issue
- 12
- Pages
- 2329-2352
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2094068820
- Cited by
- 62
- References
- 3
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Crystallization kinetics and melting of caprolactone random copolymers. https://app.cochat.ai/papers/10.1002/polb.1990.090281212
- The paper
- Goulet, L., & Prud'homme, R. E. (1990). Crystallization kinetics and melting of caprolactone random copolymers. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.1990.090281212
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.