The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
Electrolytes, SEI Formation, and Binders: A Review of Nonelectrode Factors for Sodium‐Ion Battery Anodes
Abstract
Through intense effort in recent years, knowledge of Na‐ion batteries has been advanced significantly, pertaining to electrodes. Often, such progress has been accompanied by using a convenient choice of electrolyte or binder. Nevertheless, it has been witnessed that “external” factors to electrodes, such as electrolytes, solid electrolyte interphase, and binders, affect the functions of electrodes profoundly. And generally, certain types of electrodes favor some electrolytes or binders. With a rapidly increasing number of publications in the area, trends in terms of electrolytes and binders are possibly exploitable. Unfortunately, the field has yet to see a review article that devotes itself to these nonelectrode aspects of Na‐ion batteries. Here, the gap is filled by conducting a comprehensive review of these nonelectrode external factors, especially by looking into their correlation with electrochemical properties, such as cycle life, and first cycle coulombic efficiency. Not only are the representative reports reviewed, but also quantitative analyses on the database that are constructed are provided. With such analyses, some new data‐driven perspectives are postulated, which are of great value to the community.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Galiński, M., Lewandowski, A., & Stępniak, I. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.03.016 · Cited by 2,682
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Choi, S., Kwon, T.-W., Coskun, A., & Choi, J. W. (2017) · Science · doi:10.1126/science.aal4373 · Cited by 1,338
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
An Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
Jache, B., & Adelhelm, P. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403734 · Cited by 963
Eftekhari, A., Jian, Z., & Ji, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07989 · Cited by 860
Self-citationSodium Storage Behavior in Natural Graphite using Ether‐based Electrolyte Systems
Kim, H., Hong, J., Park, Y., Kim, J., Hwang, I., & Kang, K. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402984 · Cited by 767
EIS study on the formation of solid electrolyte interface in Li-ion battery
Zhang, S. S., Xu, K., & Jow, T. R. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.02.137 · Cited by 696
“Water‐in‐Salt” Electrolyte Makes Aqueous Sodium‐Ion Battery Safe, Green, and Long‐Lasting
Suo, L., Borodin, O., Wang, Y., Rong, X., Sun, W., Fan, X., Xu, S., Schroeder, M. A., Cresce, A. V., Wang, F., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701189 · Cited by 689
Ionic liquids and their solid-state analogues as materials for energy generation and storage
MacFarlane, D. R., Forsyth, M., Howlett, P. C., Kar, M., Passerini, S., Pringle, J. M., Ohno, H., Watanabe, M., Yan, F., Zheng, W., et al. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.5 · Cited by 666
Emerging Non-Aqueous Potassium-Ion Batteries: Challenges and Opportunities
Wu, X., Leonard, D. P., & Ji, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01764 · Cited by 649
Self-citationRyou, M., Kim, J., Lee, I., Kim, S., Jeong, Y. K., Hong, S., Ryu, J. H., Kim, T., Park, J., Lee, H., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203981 · Cited by 622
Zhu, H., Jia, Z., Chen, Y., Weadock, N., Wan, J., Vaaland, O., Han, X., Li, T., & Hu, L. (2013) · Nano Letters · doi:10.1021/nl400998t · Cited by 612
Interpenetrated Gel Polymer Binder for High‐Performance Silicon Anodes in Lithium‐ion Batteries
Song, J., Zhou, M., Yi, R., Xu, T., Gordin, M. L., Tang, D., Yu, Z., Regula, M., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401269 · Cited by 589
Towards high energy density sodium ion batteries through electrolyte optimization
Ponrouch, A., Dedryvère, R., Monti, D., Demet, A. E., Ateba Mba, J. M., Croguennec, L., Masquelier, C., Johansson, P., & Palacín, M. R. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41379a · Cited by 520
Small things make a big difference: binder effects on the performance of Li and Na batteries
Chou, S.-L., Pan, Y., Wang, J.-Z., Liu, H.-K., & Dou, S.-X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02475c · Cited by 428
Defective Graphene as a High-Capacity Anode Material for Na- and Ca-Ion Batteries
Datta, D., Li, J., & Shenoy, V. B. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am404788e · Cited by 421
Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell
Komaba, S., Matsuura, Y., Ishikawa, T., Yabuuchi, N., Murata, W., & Kuze, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.05.017 · Cited by 418
Understanding Solid Electrolyte Interface Film Formation on Graphite Electrodes
Zhang, S., Ding, M. S., Xu, K., Allen, J., & Jow, T. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1414946 · Cited by 373
Predicting capacity of hard carbon anodes in sodium-ion batteries using porosity measurements
Bommier, C., Luo, W., Gao, W.-Y., Greaney, A., Ma, S., & Ji, X. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.064 · Cited by 372
Self-citationWinter, M., Novák, P., & Monnier, A. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838281 · Cited by 328
Iermakova, D. I., Dugas, R., Palacín, M. R., & Ponrouch, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091513jes · Cited by 325
Ionic liquid based electrolytes for sodium-ion batteries: Na+ solvation and ionic conductivity
Monti, D., Jónsson, E., Palacín, M. R., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.153 · Cited by 321
Yildirim, H., Kinaci, A., Chan, M. K. Y., & Greeley, J. P. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02904 · Cited by 306
Yoon, G., Kim, H., Park, I., & Kang, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601519 · Cited by 299
Low-Surface-Area Hard Carbon Anode for Na-Ion Batteries via Graphene Oxide as a Dehydration Agent
Luo, W., Bommier, C., Jian, Z., Li, X., Carter, R., Vail, S., Lu, Y., Lee, J.-J., & Ji, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507679x · Cited by 293
Self-citationDual-functional gum arabic binder for silicon anodes in lithium ion batteries
Ling, M., Xu, Y., Zhao, H., Gu, X., Qiu, J., Li, S., Wu, M., Song, X., Yan, C., Liu, G., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.011 · Cited by 291
Comprehensive Insights into the Reactivity of Electrolytes Based on Sodium Ions
Eshetu, G. G., Grugeon, S., Kim, H., Jeong, S., Wu, L., Gachot, G., Laruelle, S., Armand, M. B., & Passerini, S. (2016) · ChemSusChem · doi:10.1002/cssc.201501605 · Cited by 285
Highly stable and ultrafast electrode reaction of graphite for sodium ion batteries
Zhu, Z., Cheng, F., Hu, Z., Niu, Z., & Chen, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.116 · Cited by 282
Ab initio study of sodium intercalation into disordered carbon
Tsai, P.-C., Chung, S.-C., Lin, S.-K., & Yamada, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01443c · Cited by 263
Fox, D. M., Awad, W. H., Gilman, J. W., Maupin, P. H., De Long, H. C., & Trulove, P. C. (2003) · Green Chemistry · doi:10.1039/b308444b · Cited by 246
Tuning the Solid Electrolyte Interphase for Selective Li‐ and Na‐Ion Storage in Hard Carbon
Soto, F. A., Yan, P., Engelhard, M. H., Marzouk, A., Wang, C., Xu, G., Chen, Z., Amine, K., Liu, J., Sprenkle, V. L., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606860 · Cited by 234
Dahbi, M., Nakano, T., Yabuuchi, N., Ishikawa, T., Kubota, K., Fukunishi, M., Shibahara, S., Son, J.-Y., Cui, Y.-T., Oji, H., et al. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.04.014 · Cited by 228
Origin of non-SEI related coulombic efficiency loss in carbons tested against Na and Li
Memarzadeh Lotfabad, E., Kalisvaart, P., Kohandehghan, A., Karpuzov, D., & Mitlin, D. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04995k · Cited by 226
Jache, B., Binder, J. O., Abe, T., & Adelhelm, P. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00651e · Cited by 224
Solvation behavior of carbonate-based electrolytes in sodium ion batteries
Cresce, A. V., Russell, S. M., Borodin, O., Allen, J. A., Schroeder, M. A., Dai, M., Peng, J., Gobet, M. P., Greenbaum, S. G., Rogers, R. E., et al. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp07215a · Cited by 221
Dahbi, M., Nakano, T., Yabuuchi, N., Fujimura, S., Chihara, K., Kubota, K., Son, J., Cui, Y., Oji, H., & Komaba, S. (2016) · ChemElectroChem · doi:10.1002/celc.201600365 · Cited by 218
Ionic liquid-based electrolytes for “beyond lithium” battery technologies
Giffin, G. A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05260f · Cited by 214
Boosting the rate capability of hard carbon with an ether-based electrolyte for sodium ion batteries
Zhu, Y.-E., Yang, L., Zhou, X., Li, F., Wei, J., & Zhou, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02515g · Cited by 185
Exploiting Lithium–Ether Co‐Intercalation in Graphite for High‐Power Lithium‐Ion Batteries
Kim, H., Lim, K., Yoon, G., Park, J., Ku, K., Lim, H., Sung, Y., & Kang, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700418 · Cited by 179
A sodium-ion battery exploiting layered oxide cathode, graphite anode and glyme-based electrolyte
Hasa, I., Dou, X., Buchholz, D., Shao‐Horn, Y., Hassoun, J., Passerini, S., & Scrosati, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.082 · Cited by 169
Kumar, H., Detsi, E., Abraham, D. P., & Shenoy, V. B. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03403 · Cited by 157
NaFSA–C1C3pyrFSA ionic liquids for sodium secondary battery operating over a wide temperature range
Ding, C., Nohira, T., Kuroda, K., Hagiwara, R., Fukunaga, A., Sakai, S., Nitta, K., & Inazawa, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.089 · Cited by 149
Intercalation of solvated Na-ions into graphite
Seidl, L., Bucher, N., Chu, E., Hartung, S., Martens, S., Schneider, O., & Stimming, U. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00546f · Cited by 149
Shakourian‐Fard, M., Kamath, G., Smith, K. A., Xiong, H., & Sankaranarayanan, S. K. R. S. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b04706 · Cited by 143
Unexpected performance of layered sodium-ion cathode material in ionic liquid-based electrolyte
Chagas, L. G., Buchholz, D., Wu, L., Vortmann, B., & Passerini, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.118 · Cited by 141
Rudola, A., Du, K., & Balaya, P. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0701706jes · Cited by 134
Ding, C., Nohira, T., Hagiwara, R., Matsumoto, K., Okamoto, Y., Fukunaga, A., Sakai, S., Nitta, K., & Inazawa, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.033 · Cited by 131
Light-cured polymer electrolytes for safe, low-cost and sustainable sodium-ion batteries
Colò, F., Bella, F., Nair, J. R., & Gerbaldi, C. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.079 · Cited by 125
Philippe, B., Valvo, M., Lindgren, F., Rensmo, H., & Edström, K. (2014) · Chemistry of Materials · doi:10.1021/cm5021367 · Cited by 113
Bommier, C., Leonard, D. P., Jian, Z., Stickle, W. F., Greaney, P. A., & Ji, X. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600449 · Cited by 102
Self-citationWongittharom, N., Wang, C.-H., Wang, Y., Yang, C.-H., & Chang, J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5033605 · Cited by 97
Takenaka, N., Sakai, H., Suzuki, Y., Purushotham, U., & Nagaoka, M. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b04206 · Cited by 97
Towards safer sodium-ion batteries via organic solvent/ionic liquid based hybrid electrolytes
Monti, D., Ponrouch, A., Palacín, M. R., & Johansson, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.003 · Cited by 90
Development of novel inorganic electrolytes for room temperature rechargeable sodium metal batteries
Ruiz-Martínez, D., Kovacs, A., & Gómez, R. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01735a · Cited by 84
Flores, E., Åvall, G., Jeschke, S., & Johansson, P. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.03.031 · Cited by 82
Chen, C.-Y., Kiko, T., Hosokawa, T., Matsumoto, K., Nohira, T., & Hagiwara, R. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.099 · Cited by 81
High performance red phosphorus electrode in ionic liquid-based electrolyte for Na-ion batteries
Dahbi, M., Fukunishi, M., Horiba, T., Yabuuchi, N., Yasuno, S., & Komaba, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.089 · Cited by 61
The use of protic ionic liquids with cathodes for sodium-ion batteries
Vogl, T., Vaalma, C., Buchholz, D., Secchiaroli, M., Marassi, R., Passerini, S., & Balducci, A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02277d · Cited by 59
Performance validation of sodium-ion batteries using an ionic liquid electrolyte
Fukunaga, A., Nohira, T., Hagiwara, R., Numata, K., Itani, E., Sakai, S., & Nitta, K. (2016) · Journal of Applied Electrochemistry · doi:10.1007/s10800-016-0940-6 · Cited by 50
Evolution of solid/aqueous interface in aqueous sodium-ion batteries
Zhan, X., & Shirpour, M. (2016) · Chemical Communications · doi:10.1039/c6cc08901a · Cited by 49
Micelle Formation in Aqueous Solutions of Room Temperature Ionic Liquids: A Molecular Dynamics Study
Vicent‐Luna, J. M., Enríque, J., Calero, S., & Anta, J. A. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b05552 · Cited by 49
Kazuma Gotoh, B., Maruyama, H., Miyatou, T., Mizuno, M., Urita, K., & Ishida, H. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b10962 · Cited by 47
Terada, S., Susa, H., Tsuzuki, S., Mandai, T., Ueno, K., Umebayashi, Y., Dokko, K., & Watanabe, M. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b06804 · Cited by 38
Neale, A. R., Goodrich, P. A., Hughes, T.-L., Hardacre, C., Ball, S. C., & Jacquemin, J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0141708jes · Cited by 11
Cited by
Electrolyte Solvation Structure Design for Sodium Ion Batteries
Tian, Z., Zou, Y., Liu, G., Wang, Y., Yin, J., Ming, J., & Alshareef, H. N. (2022) · Advanced Science · doi:10.1002/advs.202201207 · Cited by 671
Li, Y., Lu, Y., Meng, Q., Jensen, A. C. S., Zhang, Q., Zhang, Q., Tong, Y., Qi, Y., Gu, L., Titirici, M., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902852 · Cited by 643
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Materials Design for High‐Safety Sodium‐Ion Battery
Yang, C., Xin, S., Mai, L., & You, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000974 · Cited by 630
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Metadata
- Authors
- Bommier, C., & Ji, X.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2018-01-22
- Volume
- 14
- Issue
- 16
- Pages
- e1703576-e1703576
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2793021554
- Cited by
- 358
- References
- 75
- FWCI
- 15.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.