3D Printed Biocatalytic Living Materials with Dual‐Network Reinforced Bioinks
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The field of living materials seeks to harness living cells as microfactories that can construct a material itself or enhance the performance of material in some manner. While recent advances in 3D printing allow microbe manipulation to create bespoke living materials, the effective coupling of these living components in reinforced bioink designs remains a major challenge due to the difficulty in building a robust and cell‐friendly microenvironment. Here, a type of dual‐network bioink is reported for the 3D printing of living materials with enhanced biocatalysis capabilities, where bioinks are readily printable and provide a biocompatible environment along with desirable mechanical performance. It is demonstrated that integrating microbes into these bioinks enables the direct printing of catalytically living materials with high cell viability and maintains metabolic activity, which those living materials can be preserved and reused. Further, a bacteria‐algae coculture system is fabricated for the bioremediation of chemicals, giving rise to its potential field applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
A practical guide to hydrogels for cell culture
Caliari, S. R., & Burdick, J. A. (2016) · Nature Methods · doi:10.1038/nmeth.3839 · Cited by 2,075
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Cited by
Pugliese, R., & Regondi, S. (2022) · Polymers · doi:10.3390/polym14142794 · Cited by 152
Microalgae-based 3D bioprinting: recent advances, applications and perspectives
Tang, J., Sun, J., Cui, J., Yuan, X., Luan, G., & Lu, X. (2025) · Marine Drugs · doi:10.3390/md23090342 · Cited by 8
“UV post-processing of this system induced ten-fold G ’ enhancement (8000 Pa), while the resultant Bacillus – Chlorella co-culture system demonstrated efficient bioremediation of acrylamide and methyl orange [52].”
Rasheed, A. S., Thajuddin, F., Elumalai, A., Thajuddin, S. F., Nooruddin, T., & Dharumadurai, D. (2026) · Biotechnology and Bioprocess Engineering · doi:10.1007/s12257-026-00285-3
Metadata
- Authors
- He, F., Ou, Y., Liu, J., Huang, Q., Tang, B., Xin, F., Zhang, J., Jiang, M., Chen, S., & Yu, Z.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2021-12-02
- Volume
- 18
- Issue
- 6
- Pages
- e2104820-e2104820
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W3215239486
- Cited by
- 61
- References
- 5
- FWCI
- 2.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.