Preparation and characterization of poly (ether ether ketone)/poly (ether imide)[PEEK/PEI] blends for fused filament fabrication

The morphology of poly(aryl-ether-ether-ketone)

Blundell, D. J., & Osborn, B. N. (1983) · Polymer · doi:10.1016/0032-3861(83)90144-1 · Cited by 1,044 · see citing works

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662 · see citing works

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 608 · see citing works

Experimental investigation and empirical modelling of FDM process for compressive strength improvement

Sood, A. K., Ohdar, R., & Mahapatra, S. S. (2011) · Journal of Advanced Research · doi:10.1016/j.jare.2011.05.001 · Cited by 581 · see citing works

Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds

Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 551 · see citing works

Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory

Casavola, C., Cazzato, A., Moramarco, V., et al. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.009 · Cited by 474 · see citing works

High performance polymer nanocomposites for additive manufacturing applications

Leon, A. C. D., Chen, Q., Palaganas, N. B., Palaganas, J. O., Manapat, J. Z., & Advíncula, R. C. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.04.010 · Cited by 469 · see citing works

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462 · see citing works

Extrusion-based additive manufacturing of PEEK for biomedical applications

Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 411 · see citing works

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351 · see citing works

An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application

Vanaei, S., Parizi, M. S., Vanaei, S., Salemizadehparizi, F., & Vanaei, H. R. (2020) · Engineered Regeneration · doi:10.1016/j.engreg.2020.12.001 · Cited by 322 · see citing works

Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament

Geng, P., Zhao, J., Wu, W., Ye, W., Wang, Y., Wang, S., & Zhang, S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.11.023 · Cited by 321 · see citing works

Additive layer manufacturing of poly (ether ether ketone) via FDM

Rinaldi, M., Ghidini, T., Cecchini, F., Brandao, A., & Nanni, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.03.029 · Cited by 301 · see citing works

Performance of biocompatible PEEK processed by fused deposition additive manufacturing

Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296 · see citing works

Influence of Structural and Topological Constraints on the Crystallization and Melting Behavior of Polymers. 1. Ethylene/1-Octene Copolymers

Alizadeh, A., Richardson, L., Xu, J., McCartney, S. A., Marand, H., Cheung, Y. W., & Chum, S. P. (1999) · Macromolecules · doi:10.1021/ma990669u · Cited by 280 · see citing works

Double-melting behavior of poly(ether ether ketone)

Lee, Y., & Porter, R. S. (1987) · Macromolecules · doi:10.1021/ma00172a028 · Cited by 279 · see citing works

Enhancement of Mechanical Properties of FDM‐PLA Parts via Thermal Annealing

Wach, R. A., Wolszczak, P., & Adamus-Włodarczyk, A. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800169 · Cited by 257 · see citing works

Fatigue performance of fused filament fabrication PLA specimens

Gómez-Gras, G., Jerez‐Mesa, R., Travieso-Rodriguez, J. A., et al. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.072 · Cited by 248 · see citing works

One-Step Preparation of Large Area Films of Oriented MoS2 Nanoparticles on Multilayer Graphene and Its Electrocatalytic Activity for Hydrogen Evolution

He, J., Fernández, C., Primo, A., & Garcı́a, H. (2018) · Materials · doi:10.3390/ma11010168 · Cited by 214 · see citing works

Nano-TiO2 Reinforced PEEK/PEI Blends as Biomaterials for Load-Bearing Implant Applications

Diez-Pascual, A. M., & Díez-Vicente, A. L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00210 · Cited by 199 · see citing works

Binary blends of poly(ether ether ketone) and poly(ether imide): miscibility, crystallization behavior and semicrystalline morphology

Crevecoeur, G., & Groeninckx, G. (1991) · Macromolecules · doi:10.1021/ma00005a034 · Cited by 197 · see citing works

Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment

Gebisa, A. W., & Lemu, H. G. (2018) · Materials · doi:10.3390/ma11040500 · Cited by 188 · see citing works

Miscible blends of poly(aryl ether ketone)s and polyetherimides

Harris, J. E., & Robeson, L. M. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350713 · Cited by 173 · see citing works

The Use of Composite Materials in 3D Printing

Blanco, I. (2020) · Journal of Composites Science · doi:10.3390/jcs4020042 · Cited by 172 · see citing works

Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling

Magri, A. E., Mabrouk, K. E., Vaudreuil, S., & Touhami, M. E. (2019) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719847244 · Cited by 170 · see citing works

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

Magri, A. E., Mabrouk, K. E., Vaudreuil, S., Chibane, H., & Touhami, M. E. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49087 · Cited by 170 · see citing works

Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality

Cicala, G., Giordano, D., Tosto, C., Filippone, G., Recca, A., & Blanco, I. (2018) · Materials · doi:10.3390/ma11071191 · Cited by 167 · see citing works

Parametric appraisal of fused deposition modelling process using the grey Taguchi method

Sood, A. K., Ohdar, R., & Mahapatra, S. S. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1565 · Cited by 165 · see citing works

Characterizing short-fiber-reinforced composites produced using additive manufacturing

Ivey, M. A., Melenka, G. W., Carey, J. P., et al. (2017) · Advanced Manufacturing Polymer & Composites Science · doi:10.1080/20550340.2017.1341125 · Cited by 162 · see citing works

Semicrystalline morphology of poly(aryl ether ether ketone)/poly(ether imide) blends

Hudson, S. D., Davis, D. D., & Lovinger, A. J. (1992) · Macromolecules · doi:10.1021/ma00032a021 · Cited by 153 · see citing works

Fused Deposition Modelling of Fibre Reinforced Polymer Composites: A Parametric Review

Krajangsawasdi, N., Blok, L. G., Hamerton, I., Longana, M. L., Woods, B. K. S., & Ivanov, D. S. (2021) · Journal of Composites Science · doi:10.3390/jcs5010029 · Cited by 152 · see citing works

Glass transition, crystallization, and morphology relationships in miscible poly(aryl ether ketones) and poly(ether imide) blends

Hsiao, B. S., & Sauer, B. B. (1993) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1993.090310801 · Cited by 130 · see citing works

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

Hu, B., Duan, X., Xing, Z., Xu, Z., Du, C., Zhou, H., Chen, R., & Shan, B. (2019) · Mechanics of Materials · doi:10.1016/j.mechmat.2019.103139 · Cited by 128 · see citing works

Molecular analysis of the melting behaviour of poly(aryl-ether-ether-ketone)

Nguyen, H. X., & Ishida, H. (1986) · Polymer · doi:10.1016/0032-3861(86)90041-8 · Cited by 125 · see citing works

Preparation of Polyetherimide Nanocomposites with Improved Thermal, Mechanical and Dielectric Properties

Chen, B., Su, C., Tseng, M.-C., et al. (2006) · Polymer Bulletin · doi:10.1007/s00289-006-0630-3 · Cited by 115 · see citing works

Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer

Zalaznik, M., Kalin, M., & Novak, S. (2015) · Tribology International · doi:10.1016/j.triboint.2015.08.016 · Cited by 113 · see citing works

Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts

Vanaei, H. R., Raissi, K., Deligant, M., et al. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05057-9 · Cited by 113 · see citing works

Comprehensive NMR Studies of the Structures and Properties of PEI Polymers

Holycross, D. R., & Chai, M. (2013) · Macromolecules · doi:10.1021/ma4011796 · Cited by 107 · see citing works

An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts

Magri, A. E., Vanaei, S., & Vaudreuil, S. (2021) · High Performance Polymers · doi:10.1177/09540083211009961 · Cited by 106 · see citing works

Influence of molecular weight on rheological, thermal, and mechanical properties of PEEK

Yuan, M., Galloway, J. A., Hoffman, R. J., & Bhatt, S. (2010) · Polymer Engineering and Science · doi:10.1002/pen.21785 · Cited by 100 · see citing works

Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends

Cicala, G., Ognibene, G., Portuesi, S., Blanco, I., Rapisarda, M., Pergolizzi, E., & Recca, G. (2018) · Materials · doi:10.3390/ma11020285 · Cited by 98 · see citing works

Influence of process parameters on thermal and mechanical properties of polylactic acid fabricated by fused filament fabrication

Vanaei, H. R., Shirinbayan, M., Deligant, M., et al. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25419 · Cited by 92 · see citing works

High Performance Polymers and Engineering Plastics

(2011) · Wiley eBooks · doi:10.1002/9781118171950 · Cited by 91 · see citing works

Synthesis and Characterization of Poly(ether ether ketone) Derivatives Obtained by Carbonyl Reduction

Diez-Pascual, A. M., Martínez, G., & Gómez‐Fatou, M. A. (2009) · Macromolecules · doi:10.1021/ma901208e · Cited by 87 · see citing works

Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling

Jiang, S., Liao, G., Xu, D., Liu, F., Li, W., Cheng, Y., Li, Z., & Xu, G. J. (2018) · High Performance Polymers · doi:10.1177/0954008317752822 · Cited by 84 · see citing works

Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology

Magri, A. E., Mabrouk, K. E., Vaudreuil, S., & Touhami, M. E. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49625 · Cited by 74 · see citing works

Interlayer bonding improvement of material extrusion parts with polyphenylene sulfide using the Taguchi method

Fitzharris, E. R., Watt, I., Rosen, D. W., & Shofner, M. L. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.003 · Cited by 66 · see citing works

Experimental study of PLA thermal behavior during fused filament fabrication

Vanaei, H. R., Shirinbayan, M., Costa, S. F., et al. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49747 · Cited by 65 · see citing works

Multi-scale damage analysis and fatigue behavior of PLA manufactured by fused deposition modeling (FDM)

Vanaei, H. R., Shirinbayan, M., Vanaei, S., et al. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2019-0300 · Cited by 65 · see citing works

Processing poly(ether etherketone) an a 3D printer for thermoplastic modelling

Valentan, B., Kadivnik, Ž., Brajlih, T., Anderson, A., & Drstvenšek, I. (2013) · University of Maribor digital library (University of Maribor) · Cited by 60 · see citing works

Polymer crystallization rate challenges: The art of chemistry and processing

Andjelić, S., & Scogna, R. C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42066 · Cited by 56 · see citing works

Melting behavior of poly(ether ether ketone) in its blends with poly(ether imide)

Chen, H., & Porter, R. S. (1993) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1993.090311217 · Cited by 55 · see citing works

Evaluation of stiffness and strength in fused deposition sandwich specimens

Magalhães, L. C., Volpato, N., & Luersen, M. A. (2013) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-013-0111-1 · Cited by 52 · see citing works

Temperature-, pH- and CO2-Sensitive Poly(N-isopropylacryl amide-co-acrylic acid) Copolymers with High Glass Transition Temperatures

Shieh, Y., Lin, P.-Y., Chen, T., et al. (2016) · Polymers · doi:10.3390/polym8120434 · Cited by 50 · see citing works

The thermal stability of polyetherimide

Huang, F., Wang, X., & Li, S. (1987) · Polymer Degradation and Stability · doi:10.1016/0141-3910(87)90005-x · Cited by 48 · see citing works

Composition optimization of PEEK/PEI blend using model-free kinetics analysis

Ramani, R., & Alam, S. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.08.012 · Cited by 47 · see citing works

Crystallisation in miscible blends of PEEK and PEI

Jenkins, M. J. (2001) · Polymer · doi:10.1016/s0032-3861(00)00438-9 · Cited by 45 · see citing works

A comparative in‐process monitoring of temperature profile in fused filament fabrication

Vanaei, H. R., Deligant, M., Shirinbayan, M., et al. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25555 · Cited by 38 · see citing works

Kinetics of the isothermal degradation of model polymers containing ether, ketone and sulfone groups

Abate, L., Blanco, I., Orestano, A., et al. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.06.011 · Cited by 36 · see citing works

Printing temperature effects on the structural and mechanical performances of 3D printed Poly-(phenylene sulfide) material

Magri, A. E., Vaudreuil, S., Mabrouk, K. E., & Touhami, M. E. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/783/1/012001 · Cited by 31 · see citing works

Enhanced mechanical properties of plasticized polylactic acid filament for fused deposition modelling: Effect of in situ heat treatment

Rafie, M., Ishak, K. M. K., Hamid, Z. A. A., et al. (2019) · Progress in Rubber Plastics and Recycling Technology · doi:10.1177/1477760619895018 · Cited by 28 · see citing works

Toward a Better Understanding of the Fused Deposition Modeling Process: Comparison with Injection Molding

Askanian, H., de Lima, D. M., Commereuc, S., & Verney, V. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0060 · Cited by 27 · see citing works

Experimental and theoretical investigations of the high performance blends of PEEK/PEI

Kumar, S., Mishra, R. K., & Nandi, T. (2017) · Journal of Polymer Engineering · doi:10.1515/polyeng-2017-0002 · Cited by 26 · see citing works

Physico-chemical analysis of semi-crystalline PEEK in aliphatic and aromatic solvents

Yasin, S., Shakeel, A., Ahmad, M., et al. (2019) · Soft Materials · doi:10.1080/1539445x.2019.1572622 · Cited by 24 · see citing works

Structures and Mechanical Properties of PEEK/PEI/PES Plastics Alloys Blent by Extrusion Molding Used for Cable Insulating Jacketing

Chen, J., Guo, Q., Zhao, Z., et al. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.03.016 · Cited by 23 · see citing works

Temperature-responsive properties of poly(acrylic acid-co-acrylamide)-graft-oligo(ethylene glycol) hydrogels

Kubota, N., Tatsumoto, N., Sano, T., & Matsukawa, Y. (2001) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010502)80:5 · Cited by 19 · see citing works

Study of the thermal properties of miscible blends between poly(ether ketone ketone) (PEKK) and polyimide

Dominguez, S., Dérail, C., Leonardi, F., et al. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.10.024 · Cited by 18 · see citing works

Annealing

LeGrand, D. G. (2011) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst534 · Cited by 4 · see citing works

An Experimental Study into Active Damping Mechanisms in CNT Nanocomposite

Gardea, F., Lagoudas, D. C., & Naraghi, M. (2016) · AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2016-1418 · Cited by 3 · see citing works

Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications

Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109839 · Cited by 80 · see citing works

A comprehensive review of lunar-based manufacturing and construction

Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57 · see citing works

Strain-induced Crystallization Behavior of Amorphous PEEK Prepared by Rapid Compression

Ran, Z. (2013)

Effect of nitrogen plasma treatment on the crystallinity and self‐bonding of polyetheretherketone (PEEK) for biomedical applications

Fedel, M., Micheli, V., Thaler, M. R., et al. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4764 · Cited by 42 · see citing works

PEKK Poly Ether Ketone Ketone for High Temperature High Pressure Oil & Gas Conditions

Geslin, A., Paul, C., Bussi, P., et al. (2021) · Offshore Technology Conference · doi:10.4043/30987-ms · Cited by 2 · see citing works

b Axis type orientations in melt drawn fibres of poly(ether-ether-ketone) (PEEK)

Waddon, A. J., Keller, A., & Blundell, D. J. (1988) · Polymer Bulletin · doi:10.1007/bf00255387 · Cited by 2 · see citing works

TEM Studies on Solution-Grown Crystals of Poly (aryl-ether-ether-ketone) (PEEK)

Tsuji, M., Kawamura, H., Kawaguchi, A., et al. (1989) · Institutional Repositories DataBase (IRDB) · Cited by 1 · see citing works