Assessment of structural, biological and drug release properties of electro-sprayed poly lactic acid-dexamethasone coating for biomedical applications
Open accessThe DOI matches its Crossref record; 82 of the 82 references it cites were found in a registry or an index.
Abstract
The efficacy of an implant is highly depends on its coating characteristics mainly determined by polymer properties and coating technique. Electro-spraying is an inexpensive and versatile coating technique with various advantages for biomedical application. In this study, the efficacy of electro-sprayed (ES) poly lactic acid (PLA)-dexamethasone (DEX) coatings for medical implants was evaluated and compared with spin-coated samples as control. Structural properties of coatings were investigated using X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Confocal and scanning electron microscopy (SEM), contact angle measurement and nanoindentation tests were used to study surface properties. Coating degradation rate and drug release profile were studied for 40 days. Cell viability experiments were also performed on human endothelial (HUVEC) and smooth muscle cells (HUASMC) using MTT assay and SEM. XRD and DSC analysis showed electro-spraying significantly reduce PLA and DEX crystallinity. Surface studies showed ES coatings has significantly higher hydrophobicity and roughness with microbead-nanofiber morphology vs. micro-nanoporous structure of spin-coated samples. Initial burst release of DEX was 22% and 10% after 6 h and total release was 71% and 46% after 40 days for ES and spin-coated samples, respectively. HUVEC viability of ES samples was higher than spin-coated ones after 1 and 4 days. However, dexamethasone release profile reduced HUASMC proliferation in ES PLA-DEX samples in comparison to spin-coated after 1 and 3 days. In conclusion, in vitro results showed potential of ES PLA-DEX as a biocompatible and efficient anti-inflammatory coating with suitable drug release profile for future applications such as coronary drug eluting stents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382
Electrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289
Kamaly, N., Yameen, B., Wu, J., & Farokhzad, O. C. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00346 · Cited by 3,070
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617 · cited 2×
“Polymer degradation depends on factors such as MW, hydrophobicity and crystallinity [28].”
BackgroundEffects of substrate stiffness on cell morphology, cytoskeletal structure, and adhesion
Yeung, T., Georges, P. C., Flanagan, L. A., Marg, B., Ortiz, M., Funaki, M., Zahir, N., Ming, W., Weaver, V., & Janmey, P. A. (2005) · Cell Motility and the Cytoskeleton · doi:10.1002/cm.20041 · Cited by 2,325
Polymers for Drug Delivery Systems
Liechty, W. B., Kryscio, D. R., Slaughter, B. V., & Peppas, N. A. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100847 · Cited by 1,608
Substrate Elasticity Regulates Skeletal Muscle Stem Cell Self-Renewal in Culture
Gilbert, P. M., Havenstrite, K. L., Magnusson, K. E. G., Sacco, A., Leonardi, N. A., Kraft, P., Nguyen, N. K., Thrun, S., Lutolf, M. P., & Blau, H. M. (2010) · Science · doi:10.1126/science.1191035 · Cited by 1,587
Cell Biology of Extracellular Matrix
(1988) · Springer eBooks · doi:10.1007/978-1-4613-0881-2 · Cited by 1,470
Effects of synthetic micro- and nano-structured surfaces on cell behavior
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L., & Nealey, P. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00209-9 · Cited by 1,450
The mechanisms of drug release in poly(lactic-co-glycolic acid)-based drug delivery systems—A review
Fredenberg, S., Wahlgren, M., Reslow, M., & Axelsson, A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.05.049 · Cited by 1,286
Jiang, L., Zhao, Y., & Zhai, J. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200460333 · Cited by 1,044 · cited 1×
“By controlling various ES parameters such as solution concentration, solvent type, tip to nozzle distance, flow rate and applied voltage, different structures including micro/nanofibers [34], micro/nanoparticles [35] and composite of particlefiber structures [36] can be simply produced.”
BackgroundCell biology of extracellular matrix
(1992) · Cell · doi:10.1016/0092-8674(92)90608-f · Cited by 1,010
Mathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Mo, X. M., Xu, C. Y., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.08.042 · Cited by 803
In-Stent Restenosis in the Drug-Eluting Stent Era
Dangas, G. D., Claessen, B. E., Caixeta, A., Sanidas, E. A., Mintz, G. S., & Mehran, R. (2010) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2010.07.028 · Cited by 803
Drug-Eluting Coronary-Artery Stents
Stefanini, G. G., & Holmes, D. R. (2013) · New England Journal of Medicine · doi:10.1056/nejmra1210816 · Cited by 728
Present and future applications of biomaterials in controlled drug delivery systems
Langer, R. S., & Peppas, N. A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90059-4 · Cited by 658
Engineering microscale topographies to control the cell–substrate interface
Nikkhah, M., Edalat, F., Manoucheri, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.079 · Cited by 640
Interaction of cultured human endothelial cells with polymeric surfaces of different wettabilities
van Wachem, P. B., Beugeling, T., Feijen, J., Bantjes, A., Detmers, J. P., & van Aken, W. G. (1985) · Biomaterials · doi:10.1016/0142-9612(85)90101-2 · Cited by 591
Modern biomaterials: a review—bulk properties and implications of surface modifications
Roach, P., Eglin, D., Rohde, K., & Perry, C. C. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0064-3 · Cited by 562
Biodegradable Materials and Metallic Implants—A Review
Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., & Berzina-Cimdina, L. (2017) · Journal of Functional Biomaterials · doi:10.3390/jfb8040044 · Cited by 493
Interaction of Different Types of Cells on Polymer Surfaces with Wettability Gradient
Lee, J. H., Khang, G., Lee, J. W., & Lee, H. B. (1998) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1998.5688 · Cited by 482
Electrospraying of polymers with therapeutic molecules: State of the art
Bock, N., Dargaville, T. R., & Woodruff, M. A. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.03.002 · Cited by 440
Alizadeh-Osgouei, M., Li, Y., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.11.003 · Cited by 356
Jiang, L., Zhao, Y., & Zhai, J. (2004) · Angewandte Chemie · doi:10.1002/ange.200460333 · Cited by 338
Effects of Working Parameters on Electrospinning
Li, Z., & Wang, C. (2013) · SpringerBriefs in Materials · doi:10.1007/978-3-642-36427-3_2 · Cited by 301 · cited 1×
“Any change in morphology of ES products is related to change in ES parameters which include solution parameter such as concentration and viscosity, instrumental and environmental parameters [37].”
BackgroundShlofmitz, E., Iantorno, M., & Waksman, R. (2019) · Circulation: Cardiovascular Interventions · doi:10.1161/circinterventions.118.007023 · Cited by 289
Processing of polymer nanofibers through electrospinning as drug delivery systems
Kenawy, E.-R., Abdel-Hay, F. I., El-Newehy, M. H., & Wnek, G. E. (2009) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2008.07.081 · Cited by 277
The influence of biomaterials on endothelial cell thrombogenicity
McGuigan, A. P., & Sefton, M. V. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.039 · Cited by 229
Coaxial electrospray of microparticles and nanoparticles for biomedical applications
Zhang, L., Huang, J., Si, T., & Xu, R. X. (2012) · Expert Review of Medical Devices · doi:10.1586/erd.12.58 · Cited by 205
Electrospraying an enabling technology for pharmaceutical and biomedical applications: A review
Boda, S. K., Li, X., & Xie, J. (2018) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2018.04.002 · Cited by 196
Controlled release of sirolimus from a multilayered PLGA stent matrix
Wang, X., Venkatraman, S. S., Boey, F., Loo, S. C. J., & Tan, L. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.016 · Cited by 170
Mechanical Properties of Actin Stress Fibers in Living Cells
Lu, L., Oswald, S. J., Ngu, H., & Yin, F. C.-P. (2008) · Biophysical Journal · doi:10.1529/biophysj.108.133462 · Cited by 170
A Balance of Substrate Mechanics and Matrix Chemistry Regulates Endothelial Cell Network Assembly
Califano, J. P., & Reinhart-King, C. A. (2008) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-008-0022-x · Cited by 169
Wang, K., Wen, H.-F., Yu, D.-G., Yang, Y., & Zhang, D.-F. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.016 · Cited by 169
A Review of Recent Results on Superhydrophobic Materials Based on Micro- and Nanofibers
Ma, M., Hill, R. M., & Rutledge, G. C. (2008) · Journal of Adhesion Science and Technology · doi:10.1163/156856108x319980 · Cited by 159
Release profiles in drug-eluting stents: Issues and uncertainties
Venkatraman, S., & Boey, F. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.04.022 · Cited by 158
Controlled release of drugs in electrosprayed nanoparticles for bone tissue engineering
Jayaraman, P., Gandhimathi, C., Venugopal, J. R., Becker, D. L., Ramakrishna, S., & Srinivasan, D. K. (2015) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.09.007 · Cited by 148
PLGA–PEG–PLGA hydrogel for ocular drug delivery of dexamethasone acetate
Gao, Y., Sun, Y., Ren, F., & Gao, S. (2010) · Drug Development and Industrial Pharmacy · doi:10.3109/03639041003680826 · Cited by 130
Systematic Review of Current Dental Implant Coating Materials and Novel Coating Techniques
Xuereb, M., Camilleri, J., & Attard, N. (2015) · The International Journal of Prosthodontics · doi:10.11607/ijp.4124 · Cited by 128
Bikiaris, D., Karavelidis, Karavas, Giliopoulos, & Papadimitriou (2011) · International Journal of Nanomedicine · doi:10.2147/ijn.s26016 · Cited by 111 · cited 1×
“Usually higher degree of crystallinity leads to slower release rate due to lower mobility of polymer chains [56].”
BackgroundYang, Y., Kulangara, K., Lam, R. T. S., Dharmawan, R., & Leong, K. W. (2012) · ACS Nano · doi:10.1021/nn301713d · Cited by 107
Recent advances in micro/nanoscale biomedical implants
Arsiwala, A., Desai, P. P., & Patravale, V. B. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.06.021 · Cited by 99
Huang, Q., Lin, L., Yang, Y., Hu, R., Vogler, E. A., & Lin, C. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.08.017 · Cited by 88
Regulation of Endothelial Cell Adherence and Elastic Modulus by Substrate Stiffness
Jalali, S., Tafazzoli‐Shadpour, M., Haghighipour, N., Omidvar, R., & Safshekan, F. (2015) · Cell Communication & Adhesion · doi:10.1080/15419061.2016.1265949 · Cited by 86
Kurakula, M., & Naveen, N. R. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110326 · Cited by 85 · cited 1×
“Not surprising, this method has received a lot of attention in different area of medicine including pharmaceutical applications[17], tissue engineering [12, 18], medical implant coating and biomedical imaging [20, 21].”
MethodControlling Degradation Rate of Poly (lactic acid) for Its Biomedical Applications
Shasteen, C., & Choy, Y. B. (2011) · Biomedical Engineering Letters · doi:10.1007/s13534-011-0025-8 · Cited by 81
Endothelialization of drug eluting stents and its impact on dual anti-platelet therapy duration
Habib, A., & Finn, A. V. (2014) · Pharmacological Research · doi:10.1016/j.phrs.2014.12.003 · Cited by 81
Yutani, C., Ishibashi‐Ueda, H., Suzuki, T., & Kojima, A. (1999) · Cardiology · doi:10.1159/000006967 · Cited by 78
Polymers for Cardiovascular Stent Coatings
Strohbach, A., & Busch, R. (2015) · International Journal of Polymer Science · doi:10.1155/2015/782653 · Cited by 75
Optimization of Drug Delivery by Drug-Eluting Stents
Bozsak, F., Gonzalez‐Rodriguez, D., Sternberger, Z., Belitz, P., Bewley, T., Chomaz, J., & Barakat, A. I. (2015) · PLoS ONE · doi:10.1371/journal.pone.0130182 · Cited by 75
Bhattarai, R. S., Das, A., Alzhrani, R. M., Kang, D.-J., Bhaduri, S. B., & Boddu, S. H. S. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.305 · Cited by 74
Direct correlation between modulus and the crystalline structure in isotactic polypropylene
Menyhard, A., Suba, P., Laszlo, Z., Fekete, H. M., Mester, A. O., Horvath, Z., Voros, G., Varga, J., & Moczo, J. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.28 · Cited by 69
Zhang, J., & Han, Y. (2007) · Langmuir · doi:10.1021/la702567w · Cited by 68
Coating Techniques and Release Kinetics of Drug-Eluting Stents
Livingston, M. K., & Tan, A. (2015) · Journal of Medical Devices · doi:10.1115/1.4031718 · Cited by 64
Iranpour, P., Ajamian, M., Safavi, A., Iranpoor, N., Abbaspour, A., & Javanmardi, S. (2018) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6053-5 · Cited by 59
Guo, Q., Mather, J. P., Yang, P., Boden, M., & Mather, P. T. (2015) · PLoS ONE · doi:10.1371/journal.pone.0129960 · Cited by 56
Beake, B. D., Goodes, S. R., & Shi, B. (2009) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/42/6/065301 · Cited by 55
Nazeri, N., Karimi, R., & Ghanbari, H. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37013 · Cited by 52
Self-citationCui, X.-M., Li, X., Xu, Z., Guan, X., Ma, J., Ding, D., & Zhang, W. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.635485 · Cited by 50 · cited 1×
“Significant anti-inflammatory and anti-fungal effects observed in the core–shell nanoparticles due to release profile of drugs [19].”
BackgroundSurface engineering of titanium-based implants using electrospraying and dip coating methods
Javadi, A. A., Solouk, A., Nazarpak, M. H., & Bagheri, F. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.027 · Cited by 47
Zilberman, M. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.06.007 · Cited by 41
Electrospun fiber surface nanotopography influences astrocyte-mediated neurite outgrowth
Johnson, C. D., D’Amato, A. R., Puhl, D. L., Wich, D. M., Vesperman, A., & Gilbert, R. J. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aac4de · Cited by 39
Kim, S., English, A. E., & Kihm, K. D. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.07.033 · Cited by 36
Novel electro-conductive nanocomposites based on electrospun PLGA/CNT for biomedical applications
Nazeri, N., Derakhshan, M. A., Majidi, R. F., & Ghanbari, H. (2018) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-018-6176-8 · Cited by 34
Self-citationStructured drug-loaded bioresorbable films for support structures
Zilberman, M., Schwade, N. D., Meidell, R. S., & Eberhart, R. C. (2001) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856201753113079 · Cited by 33
Tanetsugu, Y., Tagami, T., Terukina, T., Ogawa, T., Ohta, M., & Ozeki, T. (2017) · Biological and Pharmaceutical Bulletin · doi:10.1248/bpb.b16-00437 · Cited by 32
Bahçecioğlu, G., Hasırcı, N., & Hasırcı, V. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa77f · Cited by 32
Development of a Bioactive Polymeric Drug Eluting Coronary Stent Coating Using Electrospraying
McKittrick, C. M., Cardona, M. J., Black, R. A., & McCormick, C. (2019) · Annals of Biomedical Engineering · doi:10.1007/s10439-019-02346-6 · Cited by 27
Nazeri, N., Avadi, M. R., Faramarzi, M. A., Safarian, S., Tavoosidana, G., Khoshayand, M. R., & Amani, A. (2013) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2013.09.041 · Cited by 26
Self-citationLakalayeh, G. A., Rahvar, M., Haririan, I., Karimi, R., & Ghanbari, H. (2017) · Artificial Cells Nanomedicine and Biotechnology · doi:10.1080/21691401.2017.1369424 · Cited by 23
Self-citationApplication of Electrospun Materials in Gene Delivery
Rao, G. K., Kurakula, M., & Yadav, K. S. (2020) · Wiley eBooks · doi:10.1002/9781119655039.ch10 · Cited by 21 · cited 1×
“Beside, various studies have shown that the structure of sensitive bioactive agents such as peptides, proteins and nucleic acid have been preserved during ES process [24, 25].”
BackgroundKim, J. H., Noh, H., Kang, J. H., Lee, B. S., Choi, J., Park, K., & Han, D. K. (2011) · Biomedical Engineering Letters · doi:10.1007/s13534-011-0004-0 · Cited by 17
Production of dasatinib encapsulated spray-dried poly (lactic-co-glycolic acid) particles
Chauhan, R., Balgemann, R., Greb, C., Nunn, B. M., Ueda, S., Noma, H., McDonald, K., Kaplan, H. J., Tamiya, S., & O’Toole, M. G. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.101204 · Cited by 17
Bakola, V., Tsiapla, A.-R., Karagkiozaki, V., Pappa, F., Pavlidou, E., Moutsios, I., Gravalidis, C., & Logothetidis, S. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.07.664 · Cited by 12
Zhao, L., Gao, Y., Guoxiang, G., Wu, J., Fan, Z., Dong, H. Y., & Hu, Y. (2014) · RSC Advances · doi:10.1039/c4ra01300j · Cited by 11
Rousset, F., Kokje, V. B. C., Coelho, M., Mugnier, T., Belissa, É., Gabriel, D., Gurny, R., Krause, K., & Senn, P. (2019) · Otology & Neurotology · doi:10.1097/mao.0000000000002305 · Cited by 11
Kim, D. M., Lee, B. S., Park, C. H., Park, K. D., Son, T. L., Jeong, M. H., & Han, D. K. (2010) · Polymer(Korea) · doi:10.7317/pk.2010.34.2.178 · Cited by 3
Innovative processes for the production of new nanocomposite materials by electrospinning technique
Valdéz, V. (2013) · Università degli Studi di Salerno · doi:10.14273/unisa-317 · Cited by 2 · cited 1×
“Thus, it is dispersed as amorphous molecular aggregates in polymeric matrix of electrospray-coated samples [31, 32].”
BackgroundPerego (1998) · doi:10.1002/(sici)1097-4628(19960103)59:1<37::aid-app6>3.0.co;2-n
Cited by
Dawud, H., & Ammar, A. A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020526 · Cited by 68
“The presence of numerous distinct peaks in the DEX diffractogram implies its crystalline nature, as reported in the literature [34,35].”
BackgroundLakalayeh, G. A., Rahvar, M., Nazeri, N., & Ghanbari, H. (2022) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2022.103878 · Cited by 25
Self-citationRahvar, M., Lakalayeh, G. A., Nazeri, N., Karimi, R., Borzouei, H., & Ghanbari, H. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.126445 · Cited by 17
Self-citationRahvar, M., Manoochehrabadi, T., Lakalayeh, G. A., Barzegar, Z., Karimi, R., & Ghanbari, H. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c17930 · Cited by 13
Self-citationBacterial nanocellulose as a simple and tailorable platform for controlled drug release
Costa, L., Carvalho, A. F., Fernandes, A. J. S., Campos, T., Dourado, N., Costa, F. M., & Gama, M. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124560 · Cited by 12
Metadata
- Authors
- Rahvar, M., Ahmadi Lakalayeh, G., Nazeri, N., Marouf, B. T., Shirzad, M., Najafi T. Shabankareh, A., & Ghanbari, H.
- Affiliations
- Iran University of Medical Sciences (IR)
- Qazvin University of Medical Sciences (IR)
- Urmia University (IR)
- University of Tehran (IR)
- Tehran Heart Center (IR)
- Corresponding author
- Ghanbari, Hossein
- Venue
- Biomedical Engineering Letters
- Published
- 2021-09-03
- Volume
- 11
- Issue
- 4
- Pages
- 393-406
- ISSN
- 2093-985X (ISSN-L)
- 2093-9868
- PMC
- PMC8486896
- OpenAlex
- W3198493024
- Semantic Scholar
- 5d5ad3b9f35e0c1794337c4f96d3d9666bc6b511
- Cited by
- 15
- References
- 82
- Citations by year
- 2026: 4 · 2025: 4 · 2024: 2 · 2023: 3 · 2022: 2
- FWCI
- 0.46
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Licence
- www.springernature.com/gp/researchers/text-and-data-mining (tdm)
- www.springernature.com/gp/researchers/text-and-data-mining (vor)
- Locations
- Biomedical Engineering Letters (publishedVersion)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Tehran University of Medical Sciences and Health Services (Grant number 93–03-87–27070))
- National Institute for Medical Research Development (Grant number 957310)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electrohydrodynamics and Fluid Dynamics
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- electrospraying, polylactic acid, dexamethasone, drug-eluting coatings, biomedical implants, coating crystallinity, hydrophobicity, surface roughness, nanofiber morphology, drug release profile, coating degradation, endothelial cell viability, smooth muscle cell proliferation, anti-inflammatory coatings, spin coating comparison
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.