The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Updates on the research and development of absorbable metals for biomedical applications
Open accessAbstract
Absorbable metals, metals that corrode in physiological environment, constitute a new class of biomaterials intended for temporary medical implant applications. The introduction of these metals has shifted the established paradigm of metal implants from preventing corrosion to its direct application. Interest toward absorbable metals has been growing in the past decade. This is proved by the rapid increase in scientific publication, progressive development of standards, and launching the first commercial products. Iron, magnesium, zinc, and their alloys are the current three absorbable metals families. Magnesium-based metals are the most progressing family with a large data set obtained from both basic and translational research. Iron-based metals are still facing a major challenge of low in vivo corrosion rate despite the significant efforts that have been put to overcome its weakness. Zinc-based metals are the new alternative absorbable metals with moderate corrosion rates that fall between those of iron and magnesium. This manuscript provides a brief review on the latest progress in the research and development of absorbable metals, the most important findings, the remaining challenges, and the perspective on the future direction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Agarwal, S., Curtin, J., Duffy, B., & Jaiswal, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.020 · Cited by 955
Zhao, D., Witte, F., Lu, F., Wang, J., Li, J., & Qin, L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.017 · Cited by 945
Zinc-based alloys for degradable vascular stent applications
Mostaed, E., Sikora-Jasinska, M., Drelich, J. W., & Vedani, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.005 · Cited by 565
Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review
Sanchez, A. H. M., Luthringer, B. J. C., Feyerabend, F., & Willumeit, R. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.048 · Cited by 503
A unified in vitro evaluation for apatite-forming ability of bioactive glasses and their variants
Maçon, A. L. B., Kim, T. B., Valliant, E. M., Goetschius, K., Brow, R. K., Day, D. E., Hoppe, A., Boccaccini, A. R., Kim, I. Y., Ohtsuki, C., et al. (2015) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-015-5403-9 · Cited by 489
Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy
Lee, J.-W., Han, H.-S., Han, K.-J., Park, J., Jeon, H., Ok, M.-R., Seok, H.-K., Ahn, J.-P., Lee, K. E., Lee, D.-H., et al. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1518238113 · Cited by 480
Mostaed, E., Sikora-Jasinska, M., Mostaed, A., Loffredo, S., Demir, A. G., Previtali, B., Mantovani, D., Beanland, R., & Vedani, M. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.03.018 · Cited by 475
Li, X., Liu, X., Wu, S., Yeung, K. W. K., Zheng, Y., & Chu, P. K. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.005 · Cited by 428
Cui, L.-Y., Gao, S.-D., Li, P.-P., Zeng, R.-C., Zhang, F., Li, S.-Q., & Han, E.-H. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.01.025 · Cited by 425
Haude, M., Erbel, R., Erne, P., Verheye, S., Degen, H., Böse, D., Vermeersch, P., Wijnbergen, I., Weissman, N., Prati, F., et al. (2013) · The Lancet · doi:10.1016/s0140-6736(12)61765-6 · Cited by 423
Yang, H., Wang, C., Liu, C., Chen, H., Wu, Y., Han, J., Jia, Z., Lin, W., Zhang, D., Li, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.08.022 · Cited by 399
Kubásek, J., Vojtěch, D., Jablonská, E., Pospíšilová, I., Lipov, J., & Ruml, T. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.08.015 · Cited by 360
In vivo study of magnesium plate and screw degradation and bone fracture healing
Chaya, A., Yoshizawa, S., Verdelis, K., Myers, N., Costello, B. J., Chou, D.-T., Pal, S., Maiti, S., Kumta, P. N., & Sfeir, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.010 · Cited by 359
Haude, M., Ince, H., Abizaid, A., Toelg, R., Lemos, P. A., von Birgelen, C., Christiansen, E. H., Wijns, W., Neumann, F.-J., Kaiser, C., et al. (2016) · The Lancet · doi:10.1016/s0140-6736(15)00447-x · Cited by 349
Porous magnesium-based scaffolds for tissue engineering
Yazdimamaghani, M., Razavi, M., Vashaee, D., Moharamzadeh, K., Boccaccini, A. R., & Tayebi, L. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.11.027 · Cited by 298
Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
Liu, X., Sun, J., Zhou, F., Yang, Y., Chang, R., Qiu, K., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.128 · Cited by 292
Gong, H., Wang, K., Strich, R., & Zhou, J. G. (2015) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33341 · Cited by 264
Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg–Ca–Zn alloys
Zander, D., & Zumdick, N. A. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.027 · Cited by 260
Han, P., Cheng, P., Zhang, S., Zhao, C., Ni, J., Zhang, Y., Zhong, W., Hou, P., Zhang, X., Zheng, Y., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.06.031 · Cited by 249
Cheng, M.-Q., Wahafu, T., Jiang, G.-F., Liu, W., Qiao, Y.-Q., Peng, X.-C., Cheng, T., Zhang, X.-L., He, G., & Liu, X.-Y. (2016) · Scientific Reports · doi:10.1038/srep24134 · Cited by 247
Cytotoxicity evaluation of biodegradable Zn–3Mg alloy toward normal human osteoblast cells
Murni, N. S., Dambatta, M. S., Yeap, S. K., Froemming, G. R. A., & Hermawan, H. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.01.056 · Cited by 218
Self-citationIn Vitro Cytotoxicity, Adhesion, and Proliferation of Human Vascular Cells Exposed to Zinc
Shearier, E. R., Bowen, P. K., He, W., Drelich, A., Drelich, J., Goldman, J., & Zhao, F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00035 · Cited by 209
Hiromoto, S., Inoue, M., Taguchi, T., Yamane, M., & Ohtsu, N. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.026 · Cited by 201
Haude, M., Ince, H., Abizaid, A., Toelg, R., Lemos, P. A., von Birgelen, C., Christiansen, E. H., Wijns, W., Neumann, F.-J., Kaiser, C., et al. (2016) · European Heart Journal · doi:10.1093/eurheartj/ehw196 · Cited by 189
Long-term surveillance of zinc implant in murine artery: Surprisingly steady biocorrosion rate
Drelich, A. J., Zhao, S., Guillory, R. J., Drelich, J. W., & Goldman, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.045 · Cited by 188
Lin, W., Qin, L., Qi, H., Zhang, D., Zhang, G., Gao, R., Qiu, H., Xia, Y., Cao, P., Wang, X., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.020 · Cited by 183
Liu, X., Sun, J., Yang, Y., Zhou, F., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials Letters · doi:10.1016/j.matlet.2015.07.151 · Cited by 172
A promising biodegradable magnesium alloy suitable for clinical vascular stent application
Mao, L., shen, L., Chen, J., Zhang, X., Kwak, M., Wu, Y., Fan, R., Zhang, L., Pei, J., Yuan, G., et al. (2017) · Scientific Reports · doi:10.1038/srep46343 · Cited by 171
Strategy of Metal–Polymer Composite Stent To Accelerate Biodegradation of Iron-Based Biomaterials
Qi, Y., Qi, H., He, Y., Lin, W., Li, P., Qin, L., Hu, Y., Chen, L., Liu, Q., Sun, H., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15206 · Cited by 148
Plaaß, C., von Falck, C., Ettinger, S., Sonnow, L., Calderone, F., Weizbauer, A., Reifenrath, J., Claaßen, L., Waizy, H., Daniilidis, K., et al. (2017) · Journal of Orthopaedic Science · doi:10.1016/j.jos.2017.11.005 · Cited by 147
Testa, L., Carlo, M. D., Petrolini, A., Rapetto, C., Varbella, F., Cortese, B., Gabrielli, G., Geraci, S., Loi, B., Boccuzzi, G., et al. (2017) · EuroIntervention · doi:10.4244/eij-d-17-00254 · Cited by 134
3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration
Yang, C., Huan, Z., Wang, X., Wu, C., & Chang, J. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00885 · Cited by 133
Early results using a biodegradable magnesium screw for modified chevron osteotomies
Plaaß, C., Ettinger, S., Sonnow, L., Könneker, S., Noll, Y., Weizbauer, A., Reifenrath, J., Claaßen, L., Daniilidis, K., Stukenborg-Colsman, C. M., et al. (2016) · Journal of Orthopaedic Research® · doi:10.1002/jor.23241 · Cited by 127
Yu, W., Zhao, H., Ding, Z., Zhang, Z., Sun, B., Shen, J., Chen, S., Zhang, B., Yang, K., Liu, M., et al. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.10.037 · Cited by 101
Yusop, A. H. M., Daud, N. M., Nur, H., Kadir, M. R. A., & Hermawan, H. (2015) · Scientific Reports · doi:10.1038/srep11194 · Cited by 97
Self-citationCurrent status of transcatheter valve therapy in Europe: results from an EAPCI survey
Petronio, A. S., Capranzano, P., Barbato, E., Piazza, N., Baumbach, A., Haude, M., & Windecker, S. (2016) · EuroIntervention · doi:10.4244/eijy16m06_01 · Cited by 96
Guillory, R. J., Bowen, P. K., Hopkins, S. P., Shearier, E. R., Earley, E. J., Gillette, A. A., Aghion, E., Bocks, M. L., Drelich, J. W., & Goldman, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00591 · Cited by 92
Biomolecular strategies to modulate the macrophage response to implanted materials
Kim, Y. K., Chen, E. Y., & Liu, W. F. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01605c · Cited by 91
Tissue Engineering of Artificial Organs
Atala, A. (2000) · Journal of Endourology · doi:10.1089/end.2000.14.49 · Cited by 90
Novel antibacterial biodegradable Fe-Mn-Ag alloys produced by mechanical alloying
Sotoudehbagha, P., Sheibani, S., Khakbiz, M., Ebrahimi‐Barough, S., & Hermawan, H. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.03.005 · Cited by 90
Self-citationRates ofin vivo(arterial) andin vitrobiocorrosion for pure magnesium
Bowen, P. K., Drelich, A. J., Drelich, J. W., & Goldman, J. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35179 · Cited by 88
Liu, Y., Zheng, Y., & Hayes, B. K. (2017) · Science China Materials · doi:10.1007/s40843-017-9023-9 · Cited by 82
Zhao, D., Wang, T., Nahan, K. S., Guo, X., Zhang, Z., Dong, Z., Chen, S., Chou, D., Hong, D., Kumta, P. N., et al. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.024 · Cited by 76
Dehestani, M., Adolfsson, E., & Stanciu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.092 · Cited by 74
Haude, M., Erbel, R. M., Erné, P., Verheye, S., Degen, H., Vermeersch, P. H. M. J., Weissman, N. J., Prati, F., Bruining, N., Waksman, R., et al. (2016) · EuroIntervention · doi:10.4244/eij-d-15-00371 · Cited by 74
In vivo monitoring the biodegradation of magnesium alloys with an electrochemical H2 sensor
Zhao, D., Wang, T., Kuhlmann, J., Dong, Z., Chen, S., Joshi, M., Salunke, P., Shanov, V. N., Hong, D., Kumta, P. N., et al. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.03.039 · Cited by 67
In vivo and in vitro degradation comparison of pure Mg, Mg-10Gd and Mg-2Ag: a short term study
Marco, I., Myrissa, A., Martinelli, E., Feyerabend, F., Willumeit‐Römer, R., Weinberg, A.-M., & der Biest, O. V. (2017) · European Cells and Materials · doi:10.22203/ecm.v033a07 · Cited by 67
Dynamic degradation of porous magnesium under a simulated environment of human cancellous bone
Saad, A. P. M., Jasmawati, N., Harun, M. N., Kadir, M. R. A., Nur, H., Hermawan, H., & Syahrom, A. (2016) · Corrosion Science · doi:10.1016/j.corsci.2016.08.017 · Cited by 64
Self-citationJohnston, S., Dargusch, M. S., & Atrens, A. (2017) · Science China Materials · doi:10.1007/s40843-017-9173-7 · Cited by 64
Čapek, J., Stehlíková, K., Michalcová, A., Msallamová, Š., & Vojtěch, D. (2016) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2016.06.087 · Cited by 59
Evidences of in vivo bioactivity of Fe‐bioceramic composites for temporary bone implants
Ulum, M. F., Nasution, A. K., Yusop, A. H. M., Arafat, A., Kadir, M. R. A., Juniantito, V., Noviana, D., & Hermawan, H. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33315 · Cited by 57
Self-citationShi, Y., Jia, P., Zhang, J., Niu, J., Zhang, H., Guo, S., Li, Z., & Yuan, G. (2017) · Scientific Reports · doi:10.1038/srep41796 · Cited by 57
Wang, S., Xu, Y., Zhou, J., Li, H., Chang, J., & Huan, Z. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.12.001 · Cited by 53
Witecka, A., Yamamoto, A., Idaszek, J., Chlanda, A., & Święszkowski, W. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.04.021 · Cited by 52
Alavi, R., Trenggono, A., Champagne, S., & Hermawan, H. (2017) · Metals · doi:10.3390/met7060202 · Cited by 46
Self-citationLiu, J., Wang, P. J., Chu, C., & Xi, T. (2017) · Journal of Materials Chemistry B · doi:10.1039/c6tb03147a · Cited by 41
Griebel, A. J., Schaffer, J. E., Hopkins, T., Alghalayini, A., Mkorombindo, T., Ojo, K. O., Xu, Z., Little, K. J., & Pixley, S. K. (2017) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34008 · Cited by 27
Monitoring degradation products and metal ions in vivo
Paramitha, D., Ulum, M. F., Purnama, A., Wicaksono, D. H. B., Noviana, D., & Hermawan, H. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100603-0.00002-x · Cited by 25
Self-citationAnticorrosive Self-Assembled Hybrid Alkylsilane Coatings for Resorbable Magnesium Metal Devices
Patil, A. J., Jackson, O., Fulton, L. B., Hong, D., Desai, P. A., Kelleher, S. A., Chou, D., Tan, S., Kumta, P. N., & Beniash, E. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00585 · Cited by 17
Zhu, Y.-Q., Yang, K., Edmonds, L., Wei, L., Zheng, R., Cheng, R., Cui, W., & Cheng, Y.-S. (2016) · Therapeutic Advances in Gastroenterology · doi:10.1177/1756283x16671670 · Cited by 11
Monitoring magnesium degradation using microdialysis and fabric-based biosensors
Natasha, M. S., Malon, R. S. P., Wicaksono, D. H. B., Córcoles, E. P., & Hermawan, H. (2017) · Science China Materials · doi:10.1007/s40843-017-9069-3 · Cited by 9
Self-citation
Cited by
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Biodegradable Mg alloys for orthopedic implants – A review
Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.06.024 · Cited by 612
Venezuela, J., & Dargusch, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.035 · Cited by 588
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Biodegradable materials for bone defect repair
Wei, S., Ma, J.-X., Xu, L., Gu, X.-S., & Ma, X.-L. (2020) · Military Medical Research · doi:10.1186/s40779-020-00280-6 · Cited by 406
Metadata
- Authors
- Hermawan, H.
- Venue
- Progress in Biomaterials
- Published
- 2018-05-22
- Volume
- 7
- Issue
- 2
- Pages
- 93-110
- ISSN
- 2194-0509 (ISSN-L)
- 2194-0517
- OpenAlex
- W2803136671
- Cited by
- 260
- References
- 63
- FWCI
- 7.40
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.