Digital twin-based sustainable intelligent manufacturing: a review
Open accessThe DOI matches its Crossref record; 154 of the 154 references it cites were found in a registry or an index.
Abstract
As the next-generation manufacturing system, intelligent manufacturing enables better quality, higher productivity, lower cost, and increased manufacturing flexibility. The concept of sustainability is receiving increasing attention, and sustainable manufacturing is evolving. The digital twin is an emerging technology used in intelligent manufacturing that can grasp the state of intelligent manufacturing systems in real-time and predict system failures. Sustainable intelligent manufacturing based on a digital twin has advantages in practical applications. To fully understand the intelligent manufacturing that provides the digital twin, this study reviews both technologies and discusses the sustainability of intelligent manufacturing. Firstly, the relevant content of intelligent manufacturing, including intelligent manufacturing equipment, systems, and services, is analyzed. In addition, the sustainability of intelligent manufacturing is discussed. Subsequently, a digital twin and its application are introduced along with the development of intelligent manufacturing based on the digital twin technology. Finally, combined with the current status, the future development direction of intelligent manufacturing is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
Digital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920 · cited 1×
“Product design, manufacturing, and service approach were proposed, driven by a digital twin to make the product design, manufacturing, and service more efficient [39].”
BackgroundIntelligent Manufacturing in the Context of Industry 4.0: A Review
Zhong, R. Y., Xu, X., Klotz, E., & Newman, S. T. (2017) · Engineering · doi:10.1016/j.eng.2017.05.015 · Cited by 2,913
Opportunities of Sustainable Manufacturing in Industry 4.0
Stock, T., & Seliger, G. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.129 · Cited by 1,893
Data-driven smart manufacturing
Tao, F., Qi, Q., Liu, A., & Kusiak, A. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.006 · Cited by 1,806
A Review of the Roles of Digital Twin in CPS-based Production Systems
Negri, E., Fumagalli, L., & Macchi, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.198 · Cited by 1,669
Wang, S., Wan, J., Zhang, D., Li, D., & Zhang, C. (2016) · Computer Networks · doi:10.1016/j.comnet.2015.12.017 · Cited by 1,404
Digital twin shop-floor: a new shop-floor paradigm towards smart manufacturing
Tao, F., & Zhang, M. (2017) · IEEE Access · doi:10.1109/access.2017.2756069 · Cited by 1,397
Smart manufacturing: Past research, present findings, and future directions
Kang, H. S., Lee, J. Y., Choi, S., Kim, H., Park, J. H., Son, J. Y., Kim, B. H., & Noh, S. D. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0015-5 · Cited by 1,362
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
Digital twin-driven product design framework
Tao, F., Sui, F., Liu, A., Qi, Q., Zhang, M., Song, B., Guo, Z., Lu, S. C.-Y., & Nee, A. Y. C. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1443229 · Cited by 1,187
Zheng, P., wang, H., Sang, Z., Zhong, R. Y., Liu, Y., Liu, C., Mubarok, K., Yu, S., & Xu, X. (2018) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0499-5 · Cited by 1,031
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
The Digital Twin: Realizing the Cyber-Physical Production System for Industry 4.0
Uhlemann, T. H.-J., Lehmann, C., & Steinhilper, R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.152 · Cited by 994
Sustainable manufacturing: trends and research challenges
Garetti, M., & Taisch, M. (2012) · Production Planning & Control · doi:10.1080/09537287.2011.591619 · Cited by 941
Customer experience challenges: Bringing together digital, physical and social realms
Bolton, R. N., McColl-Kennedy, J. R., Cheung, L., Gallan, A., Orsingher, C., Witell, L., & Zaki, M. (2018) · Journal of Service Management · doi:10.1108/josm-04-2018-0113 · Cited by 849
Applications of artificial intelligence in intelligent manufacturing: a review
Li, B.-H., Hou, B.-C., Yu, W.-T., Lu, X.-B., & Yang, C.-W. (2017) · Frontiers of Information Technology & Electronic Engineering · doi:10.1631/fitee.1601885 · Cited by 826
Digital Twins: The Convergence of Multimedia Technologies
El Saddik, A. (2018) · IEEE MultiMedia · doi:10.1109/mmul.2018.023121167 · Cited by 817
A review of mobile robots: Concepts, methods, theoretical framework, and applications
Rubio, F., Valero, F., & Llopis-Albert, C. (2019) · International Journal of Advanced Robotic Systems · doi:10.1177/1729881419839596 · Cited by 763
A Novel Cloud-Based Framework for the Elderly Healthcare Services Using Digital Twin
Liu, Y., Zhang, L., Yang, Y., Zhou, L., Ren, L., Wang, F., Liu, R., Pang, Z., & Deen, M. J. (2019) · IEEE Access · doi:10.1109/access.2019.2909828 · Cited by 763
CCIoT-CMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System
Tao, F., Cheng, Y., Xu, L. D., Zhang, L., & Li, B. H. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306383 · Cited by 722
Zhuang, C., Liu, J., & Xiong, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1617-6 · Cited by 693
Toward a Digital Twin for real-time geometry assurance in individualized production
Söderberg, R., Wärmefjord, K., Carlson, J. S., & Lindkvist, L. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.038 · Cited by 637
An application framework of digital twin and its case study
Zheng, Y., Yang, S., & Cheng, H. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0911-3 · Cited by 593
IoT-Based Intelligent Perception and Access of Manufacturing Resource Toward Cloud Manufacturing
Tao, F., Zuo, Y., Xu, L. D., & Zhang, L. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306397 · Cited by 587
Haag, S., & Anderl, R. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.02.006 · Cited by 559
Experimentable Digital Twins—Streamlining Simulation-Based Systems Engineering for Industry 4.0
Schluse, M., Priggemeyer, M., Atorf, L., & Rossmann, J. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2804917 · Cited by 524
The Digital Twin: Demonstrating the Potential of Real Time Data Acquisition in Production Systems
Uhlemann, T. H.-J., Schock, C., Lehmann, C., Freiberger, S., & Steinhilper, R. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.04.043 · Cited by 489
Digital Twin Service towards Smart Manufacturing
Qi, Q., Tao, F., Zuo, Y., & Zhao, D. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.103 · Cited by 485
Digital twin-driven manufacturing cyber-physical system for parallel controlling of smart workshop
Leng, J., Zhang, H., Yan, D., Liu, Q., Chen, X., & Zhang, D. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0881-5 · Cited by 475
Zhang, H., Liu, Q., Chen, X., Zhang, D., & Leng, J. (2017) · IEEE Access · doi:10.1109/access.2017.2766453 · Cited by 471
Auto ID systems and intelligent manufacturing control
McFarlane, D., Sarma, S., Chirn, J. L., Wong, C. Y., & Ashton, K. (2003) · Engineering Applications of Artificial Intelligence · doi:10.1016/s0952-1976(03)00077-0 · Cited by 462
RFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462
A Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C., Sanders, S. R., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 462
Rusinko, C. (2007) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2007.900806 · Cited by 445
Knowledge-driven digital twin manufacturing cell towards intelligent manufacturing
Zhou, G., Zhang, C., Li, Z., Ding, K., & Wang, C. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1607978 · Cited by 423
Digital twin driven human–robot collaborative assembly
Bilberg, A., & Malik, A. A. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.04.011 · Cited by 395
Dynamic Bayesian Network for Aircraft Wing Health Monitoring Digital Twin
Li, C., Mahadevan, S., Ling, Y., Choze, S., & Wang, L. (2017) · AIAA Journal · doi:10.2514/1.j055201 · Cited by 381
Manufacturing in the fourth industrial revolution: A positive prospect in Sustainable Manufacturing
Carvalho, N., Chaim, O., Cazarini, E., & Gerolamo, M. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.02.170 · Cited by 376
Digital twin-driven rapid individualised designing of automated flow-shop manufacturing system
Liu, Q., Zhang, H., Leng, J., & Chen, X. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1471243 · Cited by 370
Digital twin for CNC machine tool: modeling and using strategy
Luo, W., Hu, T., Zhang, C., & Wei, Y. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0946-5 · Cited by 350
An event-driven manufacturing information system architecture for Industry 4.0
Theorin, A., Bengtsson, K., Provost, J., Lieder, M., Johnsson, C., Lundholm, T., & Lennartson, B. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1201604 · Cited by 348
The modelling and operations for the digital twin in the context of manufacturing
Bao, J., Guo, D., Li, J., & Zhang, J. (2019) · Enterprise Information Systems · doi:10.1080/17517575.2018.1526324 · Cited by 347 · cited 1×
“A method was proposed for modeling and operating a digital twin in a manufacturing environment [43].”
MethodThe digital twin of an industrial production line within the industry 4.0 concept
Vachalek, J., Bartalsky, L., Rovny, O., Sismisova, D., Morhac, M., & Loksik, M. (2017) · 2017 21st International Conference on Process Control (PC) · doi:10.1109/pc.2017.7976223 · Cited by 339
Chiaverini, S., Siciliano, B., & Egeland, O. (1994) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.294335 · Cited by 308
Li, Z., Wang, Y., & Wang, K.-S. (2017) · Advances in Manufacturing · doi:10.1007/s40436-017-0203-8 · Cited by 307
Product Environmental Footprint (PEF) Guide
Manfredi, S., Allacker, K., Pelletier, N. L., Chomkhamsri, K., & de Souza, D. M. (2012) · Lirias · Cited by 286
Reliability analysis of CNC machine tools
Keller, A. Z., Kamath, A. R. R., & Perera, U. D. (1982) · Reliability Engineering · doi:10.1016/0143-8174(82)90036-1 · Cited by 274
Urbina Coronado, P. D., Lynn, R., Louhichi, W., Parto, M., Wescoat, E., & Kurfess, T. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.02.002 · Cited by 267
An adaptive iterative learning control algorithm with experiments on an industrial robot
Norrlof, M. (2002) · IEEE Transactions on Robotics and Automation · doi:10.1109/tra.2002.999653 · Cited by 264
Agent and Cyber-Physical System Based Self-Organizing and Self-Adaptive Intelligent Shopfloor
Zhang, Y., Qian, C., Lv, J., & Liu, Y. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2618892 · Cited by 249
Kunath, M., & Winkler, H. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.192 · Cited by 234
Sustainable product development and manufacturing by considering environmental requirements
Kaebernick, H., Kara, S., & Sun, M. (2003) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/s0736-5845(03)00056-5 · Cited by 231
Human-robot collaboration in disassembly for sustainable manufacturing
Liu, Q., Liu, Z., Xu, W., Tang, Q., Zhou, Z., & Pham, D. T. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1578906 · Cited by 224
Modeling of Cloud-Based Digital Twins for Smart Manufacturing with MT Connect
Hu, L., Nguyen, N.-T., Tao, W., Leu, M. C., Liu, X. F., Shahriar, M. R., & Al Sunny, S. M. N. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.155 · Cited by 219 · cited 1×
“A new cloud-based digital twin approach was developed for network physics cloud manufacturing platforms to reduce computing resources and enable an efficient interaction between users and physical machines [38].”
MethodNikolakis, N., Alexopoulos, K., Xanthakis, E., & Chryssolouris, G. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1529430 · Cited by 218
Exploring the role of digital twin for asset lifecycle management
Macchi, M., Roda, I., Negri, E., & Fumagalli, L. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.415 · Cited by 216
MetaMorph: An adaptive agent-based architecture for intelligent manufacturing
Maturana, F., Shen, W., & Norrie, D. H. (1999) · International Journal of Production Research · doi:10.1080/002075499190699 · Cited by 214
Machine Tool 4.0 for the new era of manufacturing
Xu, X. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0300-7 · Cited by 210
Underactuated robotics: A review
He, B., Wang, S., & Liu, Y. (2019) · International Journal of Advanced Robotic Systems · doi:10.1177/1729881419862164 · Cited by 210
Self-citationModular based flexible digital twin for factory design
Guo, J., Zhao, N., Sun, L., & Zhang, S. (2019) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-018-0953-6 · Cited by 206
Towards true product sustainability
Dyllick, T., & Rost, Z. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.189 · Cited by 203
Artificial intelligence in cyber physical systems
Radanliev, P., De Roure, D., Van Kleek, M., Santos, O., & Ani, U. (2021) · AI & SOCIETY · doi:10.1007/s00146-020-01049-0 · Cited by 199
Guo, Z. X., Ngai, E. W. T., Yang, C., & Liang, X. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2014.09.004 · Cited by 194
Industrial robot control and operator training using virtual reality interfaces
Pérez, L., Diez, E., Usamentiaga, R., & García, D. F. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.05.001 · Cited by 190
Moldavska, A., & Welo, T. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.11.004 · Cited by 185
Integration and Exploitation of Sensor Data in Smart Cities through Event-Driven Applications
Garcia Alvarez, M., Morales, J., & Kraak, M.-J. (2019) · Sensors · doi:10.3390/s19061372 · Cited by 184
Digital Twin of a Cutting Tool
Botkina, D., Hedlind, M., Olsson, B., Henser, J., & Lundholm, T. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.178 · Cited by 183 · cited 1×
“[56] introduced digital twin data formats and structures for cutting tools, information flow, and data management and applied that digital twin to improve machining solutions optimized for process planning.”
MethodThe fit of Industry 4.0 applications in manufacturing logistics: a multiple case study
Strandhagen, J. W., Alfnes, E., Strandhagen, J. O., & Vallandingham, L. R. (2017) · Advances in Manufacturing · doi:10.1007/s40436-017-0200-y · Cited by 182
Toward a cloud-based manufacturing execution system for distributed manufacturing
Helo, P., Suorsa, M., Hao, Y., & Anussornnitisarn, P. (2014) · Computers in Industry · doi:10.1016/j.compind.2014.01.015 · Cited by 181
Gbededo, M. A., Liyanage, K., & Garza-Reyes, J. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.310 · Cited by 179
Scheduling for sustainable manufacturing: A review
Akbar, M., & Irohara, T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.100 · Cited by 175
Mobile Services for Customization Manufacturing Systems: An Example of Industry 4.0
Wan, J., Yi, M., Li, D., Zhang, C., Wang, S., & Zhou, K. (2016) · IEEE Access · doi:10.1109/access.2016.2631152 · Cited by 162
Multi-criteria decision analysis framework for sustainable manufacturing in automotive industry
Stoycheva, S., Marchese, D., Paul, C., Padoan, S., Juhmani, A.-S. F. A., & Linkov, I. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.133 · Cited by 162
Cheng, Y., Zhang, Y., Ji, P., Xu, W., Zhou, Z., & Tao, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2001-2 · Cited by 161
Task Scheduling Based on a Hybrid Heuristic Algorithm for Smart Production Line with Fog Computing
Wang, J., & Li, D. (2019) · Sensors · doi:10.3390/s19051023 · Cited by 161
Fault diagnosis strategy of CNC machine tools based on cascading failure
Zhang, Y., Mu, L., Shen, G., Yang, Y., & Han, C. (2017) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-017-1382-7 · Cited by 152
Intelligent assembly system for mechanical products and key technology based on internet of things
Liu, M., Ma, J., Ling, L., Ge, M., Wang, Q., & Liu, C. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0976-6 · Cited by 148
Huang, B., Li, C., & Tao, F. (2013) · Enterprise Information Systems · doi:10.1080/17517575.2013.792396 · Cited by 140
A case study of lean, sustainable manufacturing
Miller, G., Pawloski, J., & Standridge, C. R. (2010) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.3926/jiem..v3n1.p11-32 · Cited by 138
Cloud manufacturing: a service-oriented manufacturing paradigm. A review paper
Siderska, J., & Jadaan, K. S. (2018) · Engineering Management in Production and Services · doi:10.1515/emj-2018-0002 · Cited by 136
Towards zero-defect manufacturing (ZDM)—a data mining approach
Wang, K. (2013) · Advances in Manufacturing · doi:10.1007/s40436-013-0010-9 · Cited by 134
Chen, R. (2016) · Food Control · doi:10.1016/j.foodcont.2016.06.042 · Cited by 134
Zheng, P., Lin, Y., Chen, C.-H., & Xu, X. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1530475 · Cited by 133
Work design in future industrial production: Transforming towards cyber-physical systems
Waschull, S., Bokhorst, J. A. C., Molleman, E., & Wortmann, J. C. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.01.053 · Cited by 124
Zhang, C., Zhou, G., Lu, Q., & Chang, F. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1351643 · Cited by 122
Manufacturing System Design for Resilience
Gu, X., Jin, X., Ni, J., & Koren, Y. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.02.075 · Cited by 118
Zhou, J., & Yao, X. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1292064 · Cited by 117
‘Made in China 2025’: the development of a new energy vehicle industry in China
Yeung, G. K.-Y. (2018) · Area Development and Policy · doi:10.1080/23792949.2018.1505433 · Cited by 115
An engineering framework for Service-Oriented Intelligent Manufacturing Systems
Giret, A., García, E., & Botti, V. J. (2016) · Computers in Industry · doi:10.1016/j.compind.2016.02.002 · Cited by 113
Cheng, Y., Tao, F., Xu, L., & Zhao, D. (2016) · Enterprise Information Systems · doi:10.1080/17517575.2016.1183263 · Cited by 110
Development of an industrial Internet of things suite for smart factory towards re-industrialization
Lee, C. K. M., Zhang, S., & Ng, K. K. H. (2017) · Advances in Manufacturing · doi:10.1007/s40436-017-0197-2 · Cited by 106
An approach to cyber-physical vulnerability assessment for intelligent manufacturing systems
DeSmit, Z., Elhabashy, A. E., Wells, L. J., & Camelio, J. A. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.03.004 · Cited by 101
Product carbon footprint across sustainable supply chain
He, B., Liu, Y., Zeng, L., Wang, S., Zhang, D., & Yu, Q. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118320 · Cited by 101
Self-citationService optimal selection and composition in cloud manufacturing: a comprehensive survey
Bouzary, H., & Chen, F. F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1910-4 · Cited by 99
Development of Advanced Manufacturing Cloud of Things (AMCoT)—A Smart Manufacturing Platform
Lin, Y.-C., Hung, M.-H., Huang, H.-C., Chen, C.-C., Yang, H.-C., Hsieh, Y.-S., & Cheng, F.-T. (2017) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2017.2706859 · Cited by 97
Product Sustainable Design: A Review From the Environmental, Economic, and Social Aspects
He, B., Li, F., Cao, X., & Li, T. (2020) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4045408 · Cited by 97
Self-citationBig Data enabled Intelligent Immune System for energy efficient manufacturing management
Wang, S., Liang, Y., Li, W., & Cai, X. T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.203 · Cited by 91
A knowledge management framework to support product-service systems design
Baxter, D., Roy, R., Doultsinou, A., Gao, J., & Kalta, M. (2009) · International Journal of Computer Integrated Manufacturing · doi:10.1080/09511920903207464 · Cited by 89
Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin
Lohtander, M., Ahonen, N., Lanz, M., Ratava, J., & Kaakkunen, J. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.06.057 · Cited by 89
Plug-and-Simulate within Modular Assembly Line enabled by Digital Twins and the use of AutomationML
Um, J., Weyer, S., & Quint, F. (2017) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2017.08.2360 · Cited by 88
SCADA data based condition monitoring of wind turbines
Wang, K., Sharma, V. S., & Zhang, Z. (2014) · Advances in Manufacturing · doi:10.1007/s40436-014-0067-0 · Cited by 82
Umeda, S., Nakano, M., Mizuyama, H., HIBINO, H., Kiritsis, D., & von Cieminski, G. (2015) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-22756-6 · Cited by 82
Rødseth, H., Schjølberg, P., & Marhaug, A. (2017) · Advances in Manufacturing · doi:10.1007/s40436-017-0202-9 · Cited by 78
Creation of helicopter dynamic systems digital twin using multibody simulations
Guivarch, D., Mermoz, E., Mariño, Y. A., & Sartor, M. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.04.041 · Cited by 75
Manufacturing service composition model based on synergy effect: A social network analysis approach
Ren, M., Ren, L., & Jain, H. K. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.05.039 · Cited by 73
Low-carbon product design for product life cycle
He, B., Wang, J., Huang, S., & Wang, Y. (2015) · Journal of Engineering Design · doi:10.1080/09544828.2015.1053437 · Cited by 66
Self-citationA modeling framework for manufacturing services in Service-oriented Holonic Manufacturing Systems
Quintanilla, F. G., Cardin, O., L’Anton, A., & Castagna, P. (2016) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2016.06.004 · Cited by 66
Leng, J.-W., & Jiang, P. (2017) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-017-1301-y · Cited by 64
Product environmental footprints assessment for product life cycle
He, B., Shao, Y., Wang, S., Gu, Z., & Bai, K.-J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.078 · Cited by 64
Self-citationLiu, Z., & Ming, X. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1577566 · Cited by 63
Real-time Modeling and Simulation Method of Digital Twin Production Line
Gao, Y., Lv, H., Hou, Y., Liu, J., & Xu, W. (2019) · 2019 IEEE 8th Joint International Information Technology and Artificial Intelligence Conference (ITAIC) · doi:10.1109/itaic.2019.8785703 · Cited by 63
Intelligent and integrated RFID (II-RFID) system for improving traceability in manufacturing
Wang, K. (2014) · Advances in Manufacturing · doi:10.1007/s40436-014-0053-6 · Cited by 59
Digital Twin concept for smart injection molding
Liau, Y. Y., Lee, H., & Ryu, K. R. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/324/1/012077 · Cited by 58
Guan, D., Feng, S., Zhang, L., Shi, Q., Zhao, S., & Xu, C. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b04082 · Cited by 53
Agent-based manufacturing service discovery method for cloud manufacturing
Guo, L., Wang, S., Kang, L., & Cao, Y. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7221-0 · Cited by 52
A Digital Twin for Human-Robot Interaction
Pairet, È., Ardón, P., Liu, X.-K., Lopes, J., Hastie, H., & Lohan, K. (2019) · IEEE/ACM International Conference on Human-Robot Interaction · doi:10.1109/hri.2019.8673015 · Cited by 52
Evolvable Assembly Systems: A Distributed Architecture for Intelligent Manufacturing
Chaplin, J. C., Bakker, O. J., de Silva, L., SANDERSON, D. R., Kelly, E., Logan, B. S., & Ratchev, S. M. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.393 · Cited by 51
Production as a Service: A Digital Manufacturing Framework for Optimizing Utilization
Balta, E. C., Lin, Y., Barton, K. L., Tilbury, D. M., & Mao, Z. M. (2018) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2018.2842690 · Cited by 50
Design an intelligent real-time operation planning system in distributed manufacturing network
Lv, Y., & Lin, D. (2017) · Industrial Management & Data Systems · doi:10.1108/imds-06-2016-0220 · Cited by 49
Inequalities in the social use of the Internet of things: A capital and skills perspective
van der Zeeuw, A., van Deursen, A. J. A. M., & Jansen, G. (2019) · New Media & Society · doi:10.1177/1461444818821067 · Cited by 49
Human-Robot-Interaction for mobile industrial robot teams
Berg, J., Lottermoser, A., Richter, C., & Reinhart, G. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.080 · Cited by 49
Common engines of cloud manufacturing service platform for SMEs
Song, T., Liu, H., Wei, C., & Zhang, C. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5863-y · Cited by 48
Health systems and policy research in Europe: Horizon 2020
Walshe, K., McKee, M., McCarthy, M., Groenewegen, P., Hansen, J., Figueras, J., & Ricciardi, W. (2013) · The Lancet · doi:10.1016/s0140-6736(12)62195-3 · Cited by 48
Biesinger, F., Meike, D., Krass, B., & Weyrich, M. (2018) · 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2018.8502467 · Cited by 48
An embedded self-adapting network service framework for networked manufacturing system
Tan, D., Zhang, L., & Ai, Q. (2016) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-016-1265-3 · Cited by 46
Towards low-carbon product architecture using structural optimization for lightweight
He, B., Tang, W. C., Huang, S., Hou, S., & Cai, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7676-z · Cited by 45
Self-citationAn intelligent simulation environment for manufacturing systems
Ruiz, N., Giret, A., Botti, V. J., & Feria, V. (2014) · Computers & Industrial Engineering · doi:10.1016/j.cie.2014.06.013 · Cited by 44
Ji, X., Ge, H., Xu, J.-J., & Guo, Y. (2016) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2016.04.010 · Cited by 43
A view-based 3D CAD model reuse framework enabling product lifecycle reuse
Zhang, C., & Zhou, G. (2018) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2018.09.001 · Cited by 42
Zhang, X., Ming, X., Liu, Z., Qu, Y., & Yin, D. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03593-6 · Cited by 40
Viability analysis of underground mining machinery using green hydrogen as a fuel
Guerra, C. F., Reyes-Bozo, L., Vyhmeister, E., Caparrós, M. J., Salazar, J. L., Godoy‐Faúndez, Á., Clemente-Jul, C., & Rayo, D. V. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.07.250 · Cited by 40
Zhao, Q.-J., Cao, P., & Tu, D.-W. (2014) · Advances in Manufacturing · doi:10.1007/s40436-014-0057-2 · Cited by 35 · cited 1×
“tracking of marker characters based on machine vision was proposed to realize information management and intelligent manufacturing for steel manufacturing [179].”
BackgroundAn Integrated Collaborative Platform for managing Product-service Across their Life Cycle
Matsas, M., Pintzos, G., Kapnia, A., & Mourtzis, D. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.09.009 · Cited by 35
Sustainable design synthesis for product environmental footprints
He, B., & Gu, Z. (2016) · Design Studies · doi:10.1016/j.destud.2016.04.001 · Cited by 34
Self-citationGuo, Z., Wong, W. K., & Guo, C. (2013) · International Journal of Production Research · doi:10.1080/00207543.2013.838650 · Cited by 33
Reliable Digital Twin for Connected Footballer
Balachandar, S., & Chinnaiyan, R. (2019) · Lecture Notes on Data Engineering and Communications Technologies · doi:10.1007/978-981-10-8681-6_18 · Cited by 30 · cited 1×
“In the field of sports, Balachandar and Chinnaiyan [71] used a digital twin in the field of sports to make virtual connections and monitor athletes in the lab.”
BackgroundA CAD/CAM system for fabrication of facial prostheses
Sun, J. H., Xi, J., Chen, X., & Xiong, Y. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111138379 · Cited by 29
Digital twins technolgy and its data fusion in iron and steel product life cycle
Xiang, F., Zhi, Z.-Y., & Jiang, G.-Z. (2018) · 2018 IEEE 15th International Conference on Networking, Sensing and Control (ICNSC) · doi:10.1109/icnsc.2018.8361293 · Cited by 27
Kinematics of underactuated robotics for product carbon footprint
He, B., Cao, X., & Gu, Z. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120491 · Cited by 27
Self-citationLewis, P. A. J., & Bell, K. (2019) · Employee Relations · doi:10.1108/er-10-2018-0273 · Cited by 25
A Partition-Driven Integrated Security Architecture for Cyberphysical Systems
Javed, Y., Felemban, M., Shawly, T., Kobes, J., & Ghafoor, A. (2020) · Computer · doi:10.1109/mc.2019.2914906 · Cited by 19
Condition-based Monitoring Architecture for CNC Machine Tools based on Global Knowledge
Villalonga, A., Beruvides, G., Castaño, F., Haber, R. E., & Novo, M. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.259 · Cited by 18
Digital Twin-Driven Control Method for Robotic Automatic Assembly System
Meng, S., Tang, S., Zhu, Y., & Chen, C. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/493/1/012128 · Cited by 18
Boundary Encryption-Based Monte Carlo Learning Method for Workspace Modeling
He, B., Zhu, X., & Zhang, D. (2020) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4046816 · Cited by 18
Self-citationZhang, C., Sheng, B., Yin, X., Zhao, F., & Shu, Y. (2017) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-017-0615-0 · Cited by 17
Service Business Model Innovation: the digital twin technology
Hernandez, V. M., Neely, A. D., Ouyang, A., Burstall, C., & Bisessar, D. (2019) · Cambridge University Engineering Department Publications Database · doi:10.17863/cam.35482 · Cited by 17
Digital Twin: Intersection of Mind and MachinePreprint
Soni, R. K., Tanmay, D., Twinkle, T., & Bhatia, M. (2019) · SSRN Electronic Journal · Cited by 17
He, B., Xue, H., Liu, L., Pan, Q., Tang, W. C., & Ostrosi, E. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2641-2 · Cited by 14
Self-citationVoinov, N., Chernorutsky, I., DROBINTSEV, P. D., & Kotlyarov, V. P. (2017) · Advances in Manufacturing · doi:10.1007/s40436-017-0195-4 · Cited by 12
Dynamics analysis and numerical simulation of a novel underactuated robot wrist
He, B., Zhang, P., Liu, W., et al. (2016) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405415624362 · Cited by 12
Self-citationTool-path generation for industrial robotic surface-based application
Lyu, H., Liu, Y., Guo, J.-Y., He-Ming, Z., & Li, Z. (2019) · Advances in Manufacturing · doi:10.1007/s40436-018-00246-x · Cited by 10
Kinematics analysis and numerical simulation of a novel underactuated robot wrist
He, B., Liu, W., & Huang, S. (2014) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/0954405414535592 · Cited by 9
Self-citationAn approach to computational co-evolutionary product design
He, B., Zhou, G., Hou, S., & Zeng, L. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9295-8 · Cited by 8
Self-citation
Cited by
Digital twin: origin to future
Singh, M., Fuenmayor, E., Hinchy, E., Qiao, Y., Murray, N., & Devine, D. (2021) · Applied System Innovation · doi:10.3390/asi4020036 · Cited by 1,038
Digital twins-based smart manufacturing system design in Industry 4.0: A review
Leng, J., Wang, D., Shen, W., Li, X., Liu, Q., & Chen, X. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.05.011 · Cited by 766
Ayvaz, S., & Alpay, K. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114598 · Cited by 550
Predictive maintenance using digital twins: A systematic literature review
van Dinter, R., Tekinerdogan, B., & Catal, C. (2022) · Information and Software Technology · doi:10.1016/j.infsof.2022.107008 · Cited by 540
A comprehensive review of digital twin — part 1: modeling and twinning enabling technologies
Thelen, A., Zhang, X., Fink, O., Lu, Y., Ghosh, S., Youn, B. D., Todd, M. D., Mahadevan, S., Hu, C., & Hu, Z. (2022) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-022-03425-4 · Cited by 441
Metadata
- Authors
- He, B., & Bai, K.-J.
- Venue
- Advances in Manufacturing
- Published
- 2020-05-04
- Volume
- 9
- Issue
- 1
- Pages
- 1-21
- ISSN
- 2095-3127 (ISSN-L)
- 2195-3597
- OpenAlex
- W3022972893
- Cited by
- 621
- References
- 154
- FWCI
- 50.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.