Cited by 330Bone health and osteoporosis researchBone fractures and treatmentsCellular and Composite Structures

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus

Keaveny, Tony M., Wachtel, Edward F., Ford, Catherine M., Hayes, Wilson C.·1994·Journal of Biomechanics

Open this paper in CoChat — free account

Abstract

The conflicting conclusions regarding the relationship between the tensile and compressive strengths of trabecular bone remain unexplained. To help resolve this issue, we compared measurements of the tensile (n = 22) and compressive (n = 22) yield strengths, and yield strains, of trabecular bone specimens taken from 38 bovine proximal tibiae. We also studied how these failure properties depended on modulus and apparent density. To enhance accuracy, trabecular orientation was controlled, and each specimen had a reduced section where strains were measured with a miniature extensometer. We found that the mean yield strength was 30% lower for tensile loading. However, the difference between individual values of the tensile and compressive strengths increased linearly with increasing modulus and density, being negligible for low moduli, but substantial for high moduli. By contrast, both the tensile and compressive yield strains were independent of modulus and density, with the yield strain being 30% lower for tensile loading. Thus, the difference between the tensile and compressive strengths of bovine tibial trabecular bone depends on the modulus, but the difference between yield strains does not. This phenomenon may explain in part that conflicting conclusions reached previously on the tensile and compressive strengths of trabecular bone since the mean modulus has varied among different studies. Realizing that our data pertain only directly to bovine tibial trabecular bone for longitudinal loading, our results nevertheless suggest that failure parameters based on strains may provide more powerful and general comparisons of the failure properties for trabecular bone than measures based on stress.

Integrity signals

Registry

Crossref · 10.1016/0021-9290(94)90054-x

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

A General Theory of Strength for Anisotropic Materials
Tsai, S. W., & Wu, E. M. (1971) · Journal of Composite Materials · doi:10.1177/002199837100500106 · Cited by 3,401
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
Self-citation
The elastic and ultimate properties of compact bone tissue
Reilly, D. T., & Burstein, A. H. (1975) · Journal of Biomechanics · doi:10.1016/0021-9290(75)90075-5 · Cited by 1,533
The mechanical behaviour of cancellous bone
Gibson, L. J. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90287-8 · Cited by 932
Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals
Mosekilde, L., Mosekilde, L., & Danielsen, C. C. (1987) · Bone · doi:10.1016/8756-3282(87)90074-3 · Cited by 492
Evaluation of orthogonal mechanical properties and density of human trabecular bone from the major metaphyseal regions with materials testing and computed tomography
Ciarelli, M. J., Goldstein, S. A., Kuhn, J. L., Cody, D. D., & Brown, M. B. (1991) · Journal of Orthopaedic Research · doi:10.1002/jor.1100090507 · Cited by 401
Contribution of collagen and mineral to the elastic-plastic properties of bone
Burstein, A. H., Zika, J. M., Heiple, K. G., & Klein, L. (1975) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-197557070-00013 · Cited by 391
Fracture Prediction for the Proximal Femur Using Finite Element Models: Part I—Linear Analysis
Lotz, J. C., Cheal, E. J., & Hayes, W. C. (1991) · Journal of Biomechanical Engineering · doi:10.1115/1.2895412 · Cited by 313
Self-citation
The Various Stress Patterns of Press-Fit, Ingrown, and Cemented Femoral Stems
Huiskes, R. (1990) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199012000-00006 · Cited by 313
Physical properties of trabecular bone
Galante, J. O., Rostoker, W., & Ray, R. D. (1970) · Calcified Tissue International · doi:10.1007/bf02017552 · Cited by 302

Show all 36 references

Sorted by citations

Items 101–200 of 329

Biomechanical analysis of 4 types of short dental implants in a resorbed mandible
Lee, H., Park, S., & Noh, G. (2018) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2018.07.013 · Cited by 52
A fabric-dependent fracture criterion for bone
Pietruszczak, S., Inglis, D., & Pande, G. N. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(99)00096-2 · Cited by 51
Effects of implant diameter, implant-abutment connection type, and bone density on the biomechanical stability of implant components and bone: A finite element analysis study
Lee, H., Jo, M., Sailer, I., & Noh, G. (2021) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2020.08.042 · Cited by 51
Biomecánica y hueso (y II): ensayos en los distintos niveles jerárquicos del hueso y técnicas alternativas para la determinación de la resistencia ósea
Caeiro, J. R., González, P., & Guede, D. (2013) · Revista de Osteoporosis y Metabolismo Mineral · doi:10.4321/s1889-836x2013000200007 · Cited by 50
Mechanical properties of the normal human tibial cartilage-bone complex in relation to age
Ding, M. L., Dalstra, M., Linde, F., & Hvid, I. (1998) · Clinical Biomechanics · doi:10.1016/s0268-0033(98)00067-9 · Cited by 50
Compressive behaviour of bovine cancellous bone and bone analogous materials, microCT characterisation and FE analysis
Guillén-Girón, T., Zhang, Q.-H., Tozzi, G., Ohrndorf, A., Christ, H., & Tong, J. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.05.015 · Cited by 49
Finite element prediction with experimental validation of damage distribution in single trabeculae during three-point bending tests
Hambli, R., & Thurner, P. J. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.07.005 · Cited by 48
Within subject heterogeneity in tissue-level post-yield mechanical and material properties in human trabecular bone
Carretta, R., Stüssi, E., Müller, R., & Lorenzetti, S. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.04.014 · Cited by 47
Evaluating the macroscopic yield behaviour of trabecular bone using a nonlinear homogenisation approach
Levrero-Florencio, F., Margetts, L., Sales, E., Xie, S., Manda, K., & Pankaj, P. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.04.008 · Cited by 46
Higher doses of bisphosphonates further improve bone mass, architecture, and strength but not the tissue material properties in aged rats
Shahnazari, M., Yao, W., Dai, W., Wang, B., Ionova-Martin, S. S., Ritchie, R. O., Heeren, D., Burghardt, A. J., Nicolella, D. P., Kimiecik, M. G., et al. (2010) · Bone · doi:10.1016/j.bone.2009.11.019 · Cited by 46
Implementation of asymmetric yielding in case-specific finite element models improves the prediction of femoral fractures
Derikx, L. C., Vis, R., Meinders, T., Verdonschot, N. J. J., & Tanck, E. (2011) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2010.542463 · Cited by 46
Mechanical strength of a femoral reconstruction in paediatric oncology: A finite element study
Taddei, F., Viceconti, M., Manfrini, M., & Toni, A. (2003) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/09544110360579321 · Cited by 46
Design and implementation of a novel mechanical testing system for cellular solids
Nazarian, A., Stauber, M., & Müller, R. (2005) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30232 · Cited by 45
Mapping anisotropy of the proximal femur for enhanced image based finite element analysis
Enns-Bray, W. S., Owoc, J. S., Nishiyama, K. K., & Boyd, S. K. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.08.020 · Cited by 44
Contribution of extrafibrillar matrix to the mechanical behavior of bone using a novel cohesive finite element model
Lin, L., Samuel, J., Zeng, X., & Wang, X. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.08.027 · Cited by 44
Regional Variations in Microstructural Properties of Vertebral Trabeculae With Structural Groups
Gong, H., Zhang, M., Qin, L., Lee, K. K., Guo, X., & Shi, S. (2005) · Spine · doi:10.1097/01.brs.0000193939.99618.ee · Cited by 44
Shear Stress Distribution in the Trabeculae of Human Vertebral Bone
Fyhrie, D. P., Hoshaw, S. J., Hamid, M. S., & Hou, F. J. (2000) · Annals of Biomedical Engineering · doi:10.1114/1.1318928 · Cited by 42
The Effect of Trabecular Structure on DXA-based Predictions of Bovine Bone Failure
Oden, Z. M., Selvitelli, D. M., Hayes, W. C., & Myers, E. R. (1998) · Calcified Tissue International · doi:10.1007/s002239900491 · Cited by 42
Self-citation
Creep dominates tensile fatigue damage of the cement–bone interface
Kim, D., Miller, M. A., & Mann, K. A. (2003) · Journal of Orthopaedic Research® · doi:10.1016/j.orthres.2003.09.007 · Cited by 41
Effect of Bone Material Properties on the Initial Stability of a Cementless Hip Stem: A Finite Element Study
Wong, A. S., New, A., Isaac, G. H., & Taylor, M. (2005) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/095441105x34293 · Cited by 41
Compressive and shear properties of alginate gel: Effects of sodium ions and alginate concentration
LeRoux, M. A., Guilak, F., & Setton, L. A. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199910)47:1 · Cited by 449
Self-citation
An Alternative Fabric-based Yield and Failure Criterion for Trabecular Bone
Zysset, P., & Rincón, L. (2006) · Mechanics of Biological Tissue · doi:10.1007/3-540-31184-x_33 · Cited by 39
Age-related changes in human trabecular bone: Relationship between microstructural stress and strain and damage morphology
Green, J. O., Nagaraja, S., Diab, T., Vidaković, B., & Guldberg, R. E. (2011) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2011.05.034 · Cited by 38
Relationships among ultrasonic and mechanical properties of cancellous bone in human calcaneus in vitro
Wear, K. A., Nagaraja, S., Dreher, M. L., Sadoughi, S., Zhu, S. A., & Keaveny, T. M. (2017) · Bone · doi:10.1016/j.bone.2017.06.021 · Cited by 38
Self-citation
Dual-scale porous biphasic calcium phosphate gyroid scaffolds using ceramic suspensions containing polymer microsphere porogen for digital light processing
Lee, Y.-H., Lee, J.-W., Yang, S. Y., Lee, H., Koh, Y., & Kim, H. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.12.254 · Cited by 37
Fatigue characterization of a polymer foam to use as a cancellous bone analog material in the assessment of orthopaedic devices
Palissery, V., Taylor, M., & Browne, M. (2003) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000010098.65572.3b · Cited by 36
Sensitivity of damage predictions to tissue level yield properties and apparent loading conditions
Niebur, G. L., Yuen, J. C., Burghardt, A. J., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00003-3 · Cited by 37
Self-citation
Postfailure compressive behavior of tibial trabecular bone in three anatomic directions
Keyak, J. H., Lee, I. Y., Nath, D. S., & Skinner, H. B. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199607)31:3 · Cited by 37
Biomechanical properties and clinical significance of cancellous bone in proximal femur: A review
Wang, H., Zhang, Y., Ren, C., Ding, K., Zhang, Q., Zhu, Y., & Chen, W. (2023) · Injury · doi:10.1016/j.injury.2023.03.010 · Cited by 36
Fast Trabecular Bone Strength Predictions of HR-pQCT and Individual Trabeculae Segmentation–Based Plate and Rod Finite Element Model Discriminate Postmenopausal Vertebral Fractures
Liu, X. S., Wang, J., Zhou, B., Stein, E. M., Shi, X., Adams, M., Shane, E. J., & Guo, X.-D. E. (2013) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.1919 · Cited by 36
The effect of impact direction on the fracture load of osteoporotic proximal femurs
Wakao, N., Harada, A., Matsui, Y., Takemura, M., Shimokata, H., Mizuno, M., Ito, M., Matsuyama, Y., & Ishiguro, N. (2009) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2009.07.010 · Cited by 36
Voxel-based micro-finite element analysis of dental implants in a human cadaveric mandible: Tissue modulus assignment and sensitivity analyses
Mao, Q., Su, K., Zhou, Y., Hossaini-Zadeh, M., Lewis, G. S., & Du, J. H. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.03.008 · Cited by 35
Integrated remodeling-to-fracture finite element model of human proximal femur behavior
Hambli, R., Lespessailles, É., & Benhamou, C.-L. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.08.011 · Cited by 35
Regional Variations in the Apparent and Tissue-Level Mechanical Parameters of Vertebral Trabecular Bone with Aging Using Micro-Finite Element Analysis
Gong, H., Zhang, M., Qin, L., & Hou, Y. (2007) · Annals of Biomedical Engineering · doi:10.1007/s10439-007-9332-8 · Cited by 35
Introduction: Basic concept and definitions in mechanics
Cordey, J. (2000) · Injury · doi:10.1016/s0020-1383(00)80039-x · Cited by 34
Endocortical bone loss in osteoporosis: the role of bone surface availability
Buenzli, P. R., Thomas, C. D. L., Clement, J. G., & Pivonka, P. (2013) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2567 · Cited by 39
One year of alendronate treatment lowers microstructural stresses associated with trabecular microdamage initiation
O'Neal, J. M., Diab, T., Allen, M. R., Vidaković, B., Burr, D. B., & Guldberg, R. E. (2010) · Bone · doi:10.1016/j.bone.2010.05.016 · Cited by 33
In vitro validation of a novel mechanical model for testing the anchorage capacity of pedicle screws using physiological load application
Liebsch, C., Zimmermann, J., Graf, N., Schilling, C., Wilke, H., & Kienle, A. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.10.030 · Cited by 31
A method for patient-specific evaluation of vertebral cancellous bone strength: In vitro validation
Diamant, I., Shahar, R., Masharawi, Y., & Gefen, A. (2006) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2006.10.005 · Cited by 31
Predicting Failure Load of the Femur with Simulated Osteolytic Defects using Noninvasive Imaging Technique in a Simplified Load Case
Lee, T. (2007) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9237-y · Cited by 30
Hierarchical Biomechanics: Concepts, Bone as Prominent Example, and Perspectives Beyond
Hellmich, C., Ukaj, N., Smeets, B., Oosterwyck, H. V., Filipović, N., Zelaya-Lainez, L., Kalliauer, J., & Scheiner, S. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4055032 · Cited by 30
Foam-Reinforced Elderly Human Tibia Approximates Young Human Tibia Better than Porcine Tibia
Bailey, S. B., Grover, D. M., Howell, S. M., & Hull, M. L. (2004) · The American Journal of Sports Medicine · doi:10.1177/0363546503261716 · Cited by 30
Insights into the effects of tensile and compressive loadings on microstructure dependent fracture of trabecular bone
Tomar, V. (2008) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2008.12.013 · Cited by 29
Full-field strain measurement and fracture analysis of rat femora in compression test
Yavari, S. A., van der Stok, J., Weinans, H., & ZADPOOR, A. A. (2013) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2013.02.007 · Cited by 29
Towards patient‐specific material modeling of trabecular bone post‐yield behavior
Carretta, R., Lorenzetti, S., & Müller, R. (2012) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2516 · Cited by 29
The influence of miniscrew insertion torque
Nguyen, M. V., Codrington, J. D., Fletcher, L., Dreyer, C. W., & Sampson, W. J. (2017) · European Journal of Orthodontics · doi:10.1093/ejo/cjx026 · Cited by 29
Assessing the Susceptibility to Local Buckling at the Femoral Neck Cortex to Age-Related Bone Loss
Lee, T., Choi, J. B., Schafer, B. W., Segars, W. P., Eckstein, F., Kühn, V., & Beck, T. (2009) · Annals of Biomedical Engineering · doi:10.1007/s10439-009-9751-9 · Cited by 29
Bone as a Material
McNamara, L. M. (2011) · Elsevier eBooks · doi:10.1016/b978-0-08-055294-1.00068-4 · Cited by 31
Characterization of bone quality using computer‐extracted radiographic features
Jiang, C., Giger, M. L., Chinander, M. R., Martell, J. M., Kwak, S. M., & Favus, M. J. (1999) · Medical Physics · doi:10.1118/1.598604 · Cited by 29
Design and Analysis of 3D Customized Models of a Human Mandible
Martorelli, M., Maietta, S., Gloria, A., Santis, R. D., Pei, E., & Lanzotti, A. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.11.016 · Cited by 28
Effect of torsional loading on compressive fatigue behaviour of trabecular bone
Januddi, F., Rabiatul, A. A. R., Harun, M. N., Kadir, M. R. A., Kamarul, T., & Syahrom, A. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.09.006 · Cited by 28
Axial-shear interaction effects on microdamage in bovine tibial trabecular bone
Wang, X., Guyette, J. P., Liu, X., Roeder, R. K., & Niebur, G. L. (2005) · European Journal of Morphology · doi:10.1080/09243860500095570 · Cited by 28
Endocortical bone loss in osteoporosis: The role of bone surface availability
Buenzli, P. R., David, C., Thomasb, L., Clementb, J. G., & Pivonka, P. (2013) · QUT ePrints (Queensland University of Technology) · Cited by 28
Anatomic and Directional Variation in the Mechanical Properties of the Mandibular Condyle in Pigs
Teng, S., & Herring, S. W. (1996) · Journal of Dental Research · doi:10.1177/00220345960750110501 · Cited by 28
Effect of the metastatic defect on the structural response and failure process of human vertebrae: An experimental study
Alkalay, R. N. (2014) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2014.10.001 · Cited by 26
Sensitivity of QUS parameters to controlled variations of bone strength assessed with a cellular model
Haïat, G., Padilla, F. R., & Laugier, P. (2008) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2008.824 · Cited by 26
Noninvasive Analysis of Bone Mass, Structure and Strength
Ferretti, J. L., Cointry, G. R., & Capozza, R. F. (2002) · CRC Press eBooks · doi:10.1201/b14228-10 · Cited by 26
The effect of heterobifunctional crosslinkers on HEMA hydrogel modulus and toughness
Boazak, E. M., Greene, V. K., & Auguste, D. T. (2019) · PLoS ONE · doi:10.1371/journal.pone.0215895 · Cited by 25
The artiodactyl calcaneus as a potential ‘control bone’ cautions against simple interpretations of trabecular bone adaptation in the anthropoid femoral neck
Sinclair, K. D., Farnsworth, R. W., Pham, T. X., Knight, A. N., Bloebaum, R. D., & Skedros, J. G. (2013) · Journal of Human Evolution · doi:10.1016/j.jhevol.2013.01.003 · Cited by 25
The processing and characterization of animal-derived bone to yield materials with biomedical applications. Part III: material and mechanical properties of fresh and processed bovine cancellous bone
Anderson, I. A., Mucalo, M. R., Johnson, G. S., & Lorier, M. A. (2000) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008932013702 · Cited by 25
Algorithms for a strain‐based plasticity criterion for bone
Pankaj, P., & Donaldson, F. E. (2012) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2491 · Cited by 24
Rate-dependent fracture modes in human femoral cortical bone
Shannahan, L., Weerasooriya, T., Gunnarsson, A., Sanborn, B. D., & Lamberson, L. E. (2015) · International Journal of Fracture · doi:10.1007/s10704-015-0035-0 · Cited by 25
On the mechanical stability of porous coated press fit titanium implants: A finite element study of a pushout test
Helgason, B., Viceconti, M., Rúnarsson, T. P., & Brynjólfsson, S. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2008.03.007 · Cited by 24
On the modelling bone tissue fracture and healing of the bone tissue.
Doblaré, M., & García, J. M. (2003) · PubMed · Cited by 24
An expression relating breaking stress and density of trabecular bone
Rajapakse, C. S., Thomsen, J. S., Ortiz, J. S. E., Wimalawansa, S. J., Ebbesen, E. N., Mosekilde, L., & Gunaratne, G. H. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.12.001 · Cited by 23
Cortical Bone Fracture
Ritchie, R. O., Kinney, J. H., Kruzic, J. J., & Nalla, R. K. (2006) · Wiley Encyclopedia of Biomedical Engineering · doi:10.1002/9780471740360.ebs0505 · Cited by 23
The use of an electrostatic lens to enhance the efficiency of the electrospinning process
Vaquette, C., & Cooper-White, J. J. (2012) · Cell and Tissue Research · doi:10.1007/s00441-011-1318-z · Cited by 22
Nonlinear micro‐CT based FE modeling of trabecular bone—Sensitivity of apparent response to tissue constitutive law and bone volume fraction
Sabet, F. A., Jin, O., Korić, S., & Jasiuk, I. (2017) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2941 · Cited by 22
Potential of in vivo MRI‐based nonlinear finite‐element analysis for the assessment of trabecular bone post‐yield properties
Zhang, N., Magland, J. F., Rajapakse, C. S., Bhagat, Y. A., & Wehrli, F. W. (2013) · Medical Physics · doi:10.1118/1.4802085 · Cited by 22
Do regional modifications in tissue mineral content and microscopic mineralization heterogeneity adapt trabecular bone tracts for habitual bending? Analysis in the context of trabecular architecture of deer calcanei
Skedros, J. G., Knight, A. N., Farnsworth, R. W., & Bloebaum, R. D. (2012) · Journal of Anatomy · doi:10.1111/j.1469-7580.2011.01470.x · Cited by 21
Variability of the pullout strength of cancellous bone screws with cement augmentation
Procter, P., Bennani, P., Brown, C., Arnoldi, J., Pioletti, D. P., & Larsson, S. (2015) · Clinical Biomechanics · doi:10.1016/j.clinbiomech.2015.03.003 · Cited by 21
Towards a patient-specific estimation of intra-operative femoral fracture risk
Esposito, L., Bifulco, P., Gargiulo, P., Gíslason, M. K., Cesarelli, M., Iuppariello, L., Jónsson, H., Cutolo, A., & Fraldi, M. (2018) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2018.1508570 · Cited by 21
Improved prediction of femoral fracture toughness in mice by combining standard medical imaging with Raman spectroscopy
Massie, C. M., Knapp, E. K., Chen, K., Berger, A. J., & Awad, H. A. (2021) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2021.110243 · Cited by 21
Determination of rat vertebral bone compressive fatigue properties in untreated intact rats and zoledronic-acid-treated, ovariectomized rats
Brouwers, J. E. M., Ruchelsman, M., van Rietbergen, B., & Bouxsein, M. (2008) · Osteoporosis International · doi:10.1007/s00198-008-0803-z · Cited by 21
A two-layer elasto-visco-plastic rheological model for the material parameter identification of bone tissue
Reisinger, A., Frank, M., Thurner, P. J., & Pahr, D. H. (2020) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-020-01329-0 · Cited by 20
Influence of cortical bone thickness on miniscrew microcrack formation
Nguyen, M. V., Codrington, J. D., Fletcher, L., Dreyer, C. W., & Sampson, W. J. (2017) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2016.12.028 · Cited by 20
Increased Microstructural Variability is Associated With Decreased Structural Strength But With Increased Measures of Structural Ductility in Human Vertebrae
Yerramshetty, J., Kim, D., & Yeni, Y. N. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3148473 · Cited by 20
Microelasticity of Bone
Hellmich, C. (2007) · Springer eBooks · doi:10.1007/3-211-38046-9_8 · Cited by 20
Finite element analysis of total knee replacement considering gait cycle load and malalignment
Shi, J. (2007) · Wolverhampton Intellectual Repository and E-Theses (University of Wolverhampton) · Cited by 20
Bone Quality is Dependent on the Quantity and Quality of Organic–Inorganic Phases
Luo, Y., & Wu, X. (2020) · Journal of Medical and Biological Engineering · doi:10.1007/s40846-020-00506-x · Cited by 19
Curved Beam Computed Tomography based Structural Rigidity Analysis of Bones with Simulated Lytic Defect: A Comparative Study with Finite Element Analysis
Oftadeh, R., Karimi, Z., Villa‐Camacho, J. C., Tanck, E., Verdonschot, N. J. J., Goebel, R. T., Snyder, B. D., Nayeb‐Hashemi, H., Vaziri, A., & Nazarian, A. (2016) · Scientific Reports · doi:10.1038/srep32397 · Cited by 19
2D and 3D numerical models to evaluate trabecular bone damage
Buccino, F., Colombo, C., Duarte, D. H. L., Rinaudo, L., Ulivieri, F. M., & Vergani, L. M. (2021) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-021-02422-x · Cited by 19
Investigation of the mechanical interaction of the trabecular core with an external shell using rapid prototype and finite element models
Donnell, P. M., Harrison, N. M., Lohfeld, S., Kennedy, O. D., Zhang, Y., & McHugh, P. E. (2009) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2009.03.002 · Cited by 18
Quantification of trabecular bone microdamage using the virtual internal bond model and the individual trabeculae segmentation technique
Fang, G., Ji, B., Liu, X. S., & Guo, X.-D. E. (2010) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255840903405660 · Cited by 18
Biologic Foundations for Skeletal Tissue Engineering
Bueno, E. M., & Glowacki, J. (2011) · Synthesis lectures on tissue engineering · doi:10.1007/978-3-031-02583-9 · Cited by 21
An in vitro and finite element study of load redistribution in the midfoot
Niu, W., Tang, T., Zhang, M., Jiang, C., & Fan, Y. (2014) · Science China Life Sciences · doi:10.1007/s11427-014-4731-1 · Cited by 18
A Study of Age-Related Architectural Changes that Are Most Damaging to Bones
Song, Y., Liebschner, M. A. K., & Gunaratne, G. H. (2004) · Biophysical Journal · doi:10.1529/biophysj.104.044511 · Cited by 18
Is the 0.2%-Strain-Offset Approach Appropriate for Calculating the Yield Stress of Cortical Bone?
Zhang, G., Luo, J., Zheng, G., Bai, Z., Cao, L., & Mao, H. (2021) · Annals of Biomedical Engineering · doi:10.1007/s10439-020-02719-2 · Cited by 17
The sensitivity of nonlinear computational models of trabecular bone to tissue level constitutive model
Baumann, A. P., Shi, X., Roeder, R. K., & Niebur, G. L. (2015) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2015.1041022 · Cited by 17
Cancellous bone
(1997) · Cellular Solids · doi:10.1017/cbo9781139878326.013 · Cited by 16
TPMS-based scaffolds: Adaptation of morphological properties and mechanical response to reference tissue
Витальевна, Е. Н., Анатольевич, Т. М., & Silberschmidt, V. V. (2025) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2025.113366 · Cited by 16
Comparison of femur stiffness measured from DXA and QCT for assessment of hip fracture risk
Luo, Y., & Yang, H. (2018) · Journal of Bone and Mineral Metabolism · doi:10.1007/s00774-018-0926-z · Cited by 16
Quantifying the relation between aging-related trabecular bone microstructure and mechanical properties with digital volume correlation approach
Tanoto, H., Fan, H., Ha, D., Ambrose, C. G., Klineberg, E. O., & Zhou, Y. (2024) · Extreme Mechanics Letters · doi:10.1016/j.eml.2024.102265 · Cited by 15
Increased risk of bone fracture among patients with urinary calculi: a nationwide longitudinal population-based study
Ou, S., Chen, Y.-T., Shih, C.-J., & Tarng, D. (2014) · Osteoporosis International · doi:10.1007/s00198-014-2998-5 · Cited by 15
Development and validation of a subject-specific finite element model of the functional spinal unit to predict vertebral strength
Lee, C.-H., Landham, P. R., Eastell, R., Adams, M. A., Dolan, P., & Yang, L. (2017) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411917708806 · Cited by 15
Using visual image measurements to validate a novel finite element model of crack propagation and fracture patterns of proximal femur
Bettamer, A., Hambli, R., Allaoui, S., & Almhdie-Imjabbar, A. (2015) · Computer Methods in Biomechanics and Biomedical Engineering Imaging & Visualization · doi:10.1080/21681163.2015.1079505 · Cited by 15
2.10 Bone as a Material ☆
McNamara, L. M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10127-4 · Cited by 18
Biomechanics of Vertebral Bone
Keaveny, T. M., & Buckley, J. M. (2006) · Elsevier eBooks · doi:10.1016/b978-012369390-7/50005-8 · Cited by 15
Self-citation
Review of “Universal” Rules Governing Bone Composition, Organization, and Elasticity Across Organizational Hierarchies
Vass, V., Morin, C., Scheiner, S., & Hellmich, C. (2017) · Courses and lectures · doi:10.1007/978-3-319-58845-2_4 · Cited by 15
A multiscale predictor/corrector scheme for efficient elastoplastic voxel finite element analysis, with application to CT-based bone strength prediction
Nguyen, L. H., & Schillinger, D. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.11.014 · Cited by 14

Authors: Keaveny, T. M., Wachtel, E. F., Ford, C. M., & Hayes, W. C.
Affiliations: Beth Israel Deaconess Medical Center (US)
Harvard University (US)
Corresponding author: Keaveny, Tony M.
ORCID: Keaveny, Tony M.
Venue: Journal of Biomechanics
Publisher: Elsevier BV
Published: 1994-09
Volume: 27
Issue: 9
Pages: 1137-1146
ISSN: 0021-9290 (ISSN-L)
DOI: 10.1016/0021-9290(94)90054-x
OpenAlex: W2016308888
Cited by: 330
References: 36
Citations by year: 2026: 8 · 2025: 8 · 2024: 5 · 2023: 7 · 2022: 8 · 2021: 12 · 2020: 17 · 2019: 4 · 2018: 9 · 2017: 18 · 2016: 9 · 2015: 10 · 2014: 15 · 2013: 21 · 2012: 13
FWCI: 4.81
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Biomechanics (publishedVersion)
PubMed (publishedVersion)
Funders: National Institutes of Health (5r29ar041481-05)
National Institute of Arthritis and Musculoskeletal and Skin Diseases (R29 AR41481)
Topics: Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone fractures and treatments
Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
Keywords: trabecular bone, tensile strength, compressive strength, yield strength, yield strain, elastic modulus, bone mineral density, bovine tibia, trabecular orientation, bone mechanical properties
MeSH terms: Animals, Cattle, Elasticity, Regression Analysis, Stress, Mechanical, Tensile Strength, Tibia, Bone Density, Weight-Bearing

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks