Types of gas fluidization

The effect of particle size and size distribution on the behaviour of gas-fluidised beds

Geldart, D. (1972) · Powder Technology · doi:10.1016/0032-5910(72)83014-6 · Cited by 285

The mechanics of fluidized beds. I. The stability of the state of uniform fluidization

Jackson, R. (1963) · Medical Entomology and Zoology · Cited by 180

Cloud formation around bubbles in gas fluidized beds

Rowe, P. N., Partridge, B. A., & Lyall, E. A. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85104-6 · Cited by 109

Shock waves as a criterion for the transition from homogeneous to heterogeneous fluidization

Verloop, J., & Heertjes, P. M. (1970) · Chemical Engineering Science · doi:10.1016/0009-2509(70)85117-x · Cited by 107

Hydrodynamic Stability of a Fluidized Bed

Pigford, R. L., & Baron, T. (1965) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160013a014 · Cited by 102

The gas fluidisation of large particles

Geldart, D., & Cranfield, R. R. (1972) · The Chemical Engineering Journal · doi:10.1016/0300-9467(72)85024-x · Cited by 49

Bubble velocities and bed expansions in freely bubbling fluidised beds

Godard, K., & Richardson, J. F. (1969) · Chemical Engineering Science · doi:10.1016/0009-2509(69)80059-x · Cited by 33

Viscosity of Suspensions of Gas-Fluidized Spheres

Hagyard, T., & Sacerdote, A. M. (1966) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160020a012 · Cited by 31

Laboratory Prediction of Flow Properties of Fluidized Solids

Diekman, R., & Forsythe, W. L. (1953) · Industrial & Engineering Chemistry · doi:10.1021/ie50522a020 · Cited by 28

The fluidization of light solids by gases under pressure and heavy solids by water

Simpson, H. C., & Rodger, B. W. (1961) · Chemical Engineering Science · doi:10.1016/0009-2509(61)80028-6 · Cited by 22

EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF SOLIDS MIXING IN A GAS FLUIDIZED BED

Moslemian, D., Chen, M. M., & Chao, B. T. (1989) · Particulate Science And Technology · doi:10.1080/02726358908906547 · Cited by 29

Influence of pressure and fluidization velocity on the hydrodynamics of a fluidized bed containing horizontal tubes

Olowson, P. A. (1994) · Chemical Engineering Science · doi:10.1016/0009-2509(94)e0037-q · Cited by 29

Minimum and Terminal Velocities in Fluidization of Particulate Ceramsite at Ambient and Elevated Temperature

Hartman, M., Trnka, O., & Pohořelý, M. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0615685 · Cited by 29

Fluidization of solids with CO2 at pressures and temperatures ranging from ambient to nearly critical conditions

Poletto, M., Salatino, P., & Massimilla, L. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)80315-h · Cited by 29

Predicting the Transition from Bubbling to Slugging Fluidization Using Computational Fluid Dynamics

Lettieri, P., Saccone, G., & Cammarata, L. (2004) · Process Safety and Environmental Protection · doi:10.1205/0263876041580776 · Cited by 29

A comprehensive scaling up technique for pneumatic transport systems

Ratnayake, C. (2005) · BIBSYS Brage (BIBSYS (Norway)) · Cited by 29

Impact of the drag law formulation on the predicted binary-particle segregation patterns in a gas–solid fluidized bed

Gan, J., Zhao, H. J., Berrouk, A. S., et al. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.11.041 · Cited by 28

Minimum spouting velocity for conical spouted beds of vegetable waste biomasses

Saldarriaga, J. F., Aguado, R., Altzibar, H., et al. (2016) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.11.020 · Cited by 28

Investigation of wetting and drying process in a gas-solid fluidized bed by electrical capacitance tomography and pressure measurement

Zhang, J., Mao, M. X., Ye, J., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.07.069 · Cited by 28

Scale‐dependent nonequilibrium features in a bubbling fluidized bed

Wang, H., Chen, Y., & Wang, W. (2018) · AIChE Journal · doi:10.1002/aic.16163 · Cited by 28

Fine particle entrainment in fountain confined conical spouted beds

Estiati, I., Tellabide, M., Saldarriaga, J. F., et al. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.12.035 · Cited by 28

Mixing and segregation behaviors of a binary mixture in a pulsating fluidized bed

Lim, L. J. J., & Lim, E. W. C. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.01.026 · Cited by 28

Geldart classification for wet particles

Yehuda, T., & Kalman, H. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.11.073 · Cited by 28

Meso-scale drag model designed for coarse-grid Eulerian-Lagrangian simulation of gas-solid flows

Yu, Y., Li, Y., Jiang, M., et al. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115747 · Cited by 28

New Solar Water-Splitting Reactor With Ferrite Particles in an Internally Circulating Fluidized Bed

Gokon, N., Takahashi, S., Yamamoto, H., et al. (2009) · Journal of Solar Energy Engineering · doi:10.1115/1.3027511 · Cited by 28

Waste tyres valorisation through gasification in a bubbling fluidised bed: An exhaustive gas composition analysis

Serrano, D., Horvat, A., Batuecas, E., et al. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.10.025 · Cited by 28

Investigation on minimum fluidization velocity in a modified Geldart’s diagram

Zhou, Y., Wang, T., & Zhu, J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139984 · Cited by 28

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

El‐Emam, M. A., & Agarwal, R. K. (2023) · Physics of Fluids · doi:10.1063/5.0146264 · Cited by 28

Numerical investigation of bed-to-tube heat transfer in a shallow fluidized bed containing mixed-size particles

Zheng, N., Liu, H., Fang, J., et al. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124252 · Cited by 28

Hydrodynamic characteristics of a rotating jet annular spouted bed

Devahastin, S., MUJUMDAR, A. S., & Raghavan, G. S. V. (1999) · Powder Technology · doi:10.1016/s0032-5910(98)00231-9 · Cited by 28

An investigation on the mechanics of homogeneous expansion in gas-fluidized beds

Oke, O., Lettieri, P., & Mazzei, L. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.01.020 · Cited by 28

Effects of design features on combustion efficiency and emission performance of a biomass-fuelled fluidized-bed combustor

Sirisomboon, K., Kuprianov, V. I., & Arromdee, P. (2010) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2010.02.003 · Cited by 28

Combustion of an oil palm residue with elevated potassium content in a fluidized-bed combustor using alternative bed materials for preventing bed agglomeration

Ninduangdee, P., & Kuprianov, V. I. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.01.128 · Cited by 28

Experimental and numerical study of fluid dynamic parameters in a jetting fluidized bed of a binary mixture

Zhang, K., Zhang, J., & Zhang, B. (2003) · Powder Technology · doi:10.1016/s0032-5910(03)00041-x · Cited by 28

Heat-transfer from single horizontal tubes in fluidized beds: Influence of tube diameter, moisture and diameter-definition by Geldart C fines content

Merzsch, M., Lechner, S., & Krautz, H. J. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.12.002 · Cited by 28

Modeling of circulating fluidized beds systems for post‐combustion CO 2 capture via temperature swing adsorption

Zanco, S. E., Mazzotti, M., Gazzani, M., Romano, M. C., & Martínez, I. C. (2017) · AIChE Journal · doi:10.1002/aic.16029 · Cited by 28

Heat Transfer Characteristics of Lithium Titanate Particles in Gas-Solid Packed Fluidized Beds

Mandal, D., Sathiyamoorthy, D., & Vinjamur, M. (2012) · Fusion Science & Technology · doi:10.13182/fst12-a14128 · Cited by 28

Treatment of a Polyethylene Powder Using a Remote Nitrogen Plasma Reactor Coupled with a Fluidized Bed: Influence on Wettability and Flowability

Leroy, J. B., Fatah, N., Mutel, B., et al. (2003) · Plasmas and Polymers · doi:10.1023/a:1022861724297 · Cited by 28

Comparison of three vibrational modes (twist, vertical and horizontal) for fluidization of fine particles

Mawatari, Y., Koide, T., Tatemoto, Y., et al. (2001) · Advanced Powder Technology · doi:10.1163/15685520052384998 · Cited by 28

3D simulation of the effects of sphericity on char entrainment in fluidised beds

Papadikis, K., Gu, S., & Bridgwater, A. V. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.02.008 · Cited by 28

Control of the quality of fluidization in a tall bed using the variance of pressure fluctuations

Chong, Y. O., O’dea, D. P., White, E. T., et al. (1987) · Powder Technology · doi:10.1016/0032-5910(87)80097-9 · Cited by 28

Revisiting the standard drag law for bubbling, gas-fluidized beds

Leboreiro, J., Joseph, G. G., & Hrenya, C. M. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.01.008 · Cited by 28

Erosion of horizontal tubes in a pressurized fluidized bed — Influence of pressure, fluidization velocity and tube-bank geometry

Wiman, J., Mahpour, B., & Almstedt, A.-E. (1995) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00195-b · Cited by 28

Study of the transport disengaging height

Baron, T., Briens, C. L., & Bergougnou, M. A. (1988) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450660508 · Cited by 28

Characterization of solid particle candidates for application in thermal energy storage and concentrating solar power systems

Davenport, P., Ma, Z., Schirck, J., et al. (2023) · Solar Energy · doi:10.1016/j.solener.2023.111908 · Cited by 27

Continuum modeling of gas–particle flows: an overview

Schneiderbauer, S. (2024) · Acta Mechanica · doi:10.1007/s00707-024-04104-9 · Cited by 27

A systematic evaluation of sorption-based thermochemical energy storage for building applications: Material development, reactor design, and system integration

Liu, X., Yang, F., Liu, X., et al. (2025) · Renewable Energy · doi:10.1016/j.renene.2025.122831 · Cited by 27

DEM Study of Wet Cohesive Particles in the Presence of Liquid Bridges in a Gas Fluidized Bed

He, Y., Peng, W., Wang, T., et al. (2014) · Mathematical Problems in Engineering · doi:10.1155/2014/316568 · Cited by 27

Fluidized‐Bed Reactors – Status and Some Development Perspectives

Werther, J., Hartge, E., & Heinrich, S. (2014) · Chemie Ingenieur Technik · doi:10.1002/cite.201400117 · Cited by 27

Fluidization characteristics and fine coal dry beneficiation using a pronation-grille baffle dense phase medium fluidized bed

Zhou, E., Zhao, Y., Duan, C., et al. (2016) · Fuel · doi:10.1016/j.fuel.2016.08.029 · Cited by 27

Synthesis and characterization of geopolymer oxygen carriers for chemical looping combustion

Miccio, F., Murri, A. N., & Landi, E. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.03.005 · Cited by 27

Improvement of voidage prediction in liquid-solid fluidized beds by inclusion of the Froude number in effective drag relations

Kramer, O. J. I., Padding, J. T., van Vugt, W. H., et al. (2020) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2020.103261 · Cited by 27

Reduction in minimum fluidization velocity and minimum bubbling velocity in gas-solid fluidized beds due to vibration

McLaren, C. P., Metzger, J. P., Boyce, C. M., et al. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.01.023 · Cited by 27

New hydraulic insights into rapid sand filter bed backwashing using the Carman–Kozeny model

Kramer, O. J. I., de Moel, P. J., Padding, J. T., et al. (2021) · Water Research · doi:10.1016/j.watres.2021.117085 · Cited by 27

On the drag force closures for multiphase flow modeling

Norouzi, H. R., Golshan, S., & Zarghami, R. (2021) · Chemical Product and Process Modeling · doi:10.1515/cppm-2020-0103 · Cited by 27

Fluidized-Bed Granulation of Probiotics-Encapsulated Spray-Dried Skim Milk Powder: Effects of a Fluidizing Aid, Moisture-Activation and Dehydration

Lim, D.-H., Letona, C. A. M., Lee, M., et al. (2021) · Foods · doi:10.3390/foods10071600 · Cited by 27

Elements of the Manufacture and Properties of Technical Catalysts

García-Sánchez, J. T., & Baldovino‐Medrano, V. G. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c00369 · Cited by 27

On the entrainment of solid particles from a fluidized bed

Ściążko, M., Bandrowski, J., & Raczek, J. (1991) · Powder Technology · doi:10.1016/0032-5910(91)80078-w · Cited by 27

sandTES – An Active Thermal Energy Storage System based on the Fluidization of Powders

Schwaiger, K., Haider, M., Hämmerle, M., et al. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.03.106 · Cited by 27

Plasma spheroidization of nickel powders in a plasma reactor

Shanmugavelayutham, G., & Selvarajan, V. (2004) · Bulletin of Materials Science · doi:10.1007/bf02708563 · Cited by 27

Spouted bed drying of cork stoppers

Magalhães, A., & Pinho, C. (2007) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2007.11.009 · Cited by 27

A two-stage reduction process for the production of high-purity ultrafine Ni particles in a micro-fluidized bed reactor

Li, J., Liu, X., Zhou, L., et al. (2014) · Particuology · doi:10.1016/j.partic.2014.04.008 · Cited by 27

Hydrodynamics of particles in liquid–solid packed fluidized bed

Mandal, D. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.02.018 · Cited by 27

Wall-to-bed heat transfer in gas—solid fluidized beds: Prediction of heat transfer regimes

Flamant, G., Fatah, N., & Flitris, Y. (1992) · Powder Technology · doi:10.1016/0032-5910(92)80013-m · Cited by 27

The gravitational and aerodynamic sorting of meteoritic chondrules and metal: Experimental results with implications for chondritic meteorites

AKRIDGE, D. G., & Sears, D. W. G. (1999) · Journal of Geophysical Research Atmospheres · doi:10.1029/1999je900021 · Cited by 27

Catalytic Conversion of Thiophene under Mild Conditions over a ZSM-5 Catalyst. A Kinetic Model

Jaimes, L., & de Lasa, H. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8020126 · Cited by 27

The effect of temperature on the distributor design in bubbling fluidized beds

Sánchez-Prieto, J., Soria-Verdugo, A., Briongos, J. V., et al. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.035 · Cited by 27

Investigation of a swirling flow nozzle for a fluidised bed gas distributor

Aworinde, S. M., Holland, D. J., & Davidson, J. F. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.04.001 · Cited by 27

Electromechanics of fluidized beds of nanoparticles

Espin, M. J., Valverde, J. M., Quintanilla, M. A. S., et al. (2009) · Physical Review E · doi:10.1103/physreve.79.011304 · Cited by 27

Torque Measurements in Aerated Powders Using a Mechanically Stirred Fluidized Bed Rheometer (msFBR)

Bruni, G., Colafigli, A., Lettieri, P., et al. (2005) · Process Safety and Environmental Protection · doi:10.1205/cherd.05092 · Cited by 27

A numerical investigation of gas-particle suspensions as heat transfer media for high-temperature concentrated solar power

Marti, J., Haselbacher, A., & Steinfeld, A. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.033 · Cited by 27

Cohesive grains: Bridging microlevel measurements to macrolevel flow behavior via surface roughness

Liu, P., LaMarche, C. Q., Kellogg, K. M., et al. (2016) · AIChE Journal · doi:10.1002/aic.15383 · Cited by 27

Effect of particle mixing on the hydrodynamics of fluidized bed of nanoparticles

Ali, S. S., & Asif, M. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.01.041 · Cited by 27

Functionally graded 3D structures produced by laser cladding

del Val, J., Arias-González, F., Barro, Ó., Riveiro, A., Comesaña, R., Penide, J., Lusquiños, F., Bountinguiza, M., Quintero, F., & Pou, J. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.029 · Cited by 29

Models for Predicting Average Bubble Diameter and Volumetric Bubble Flux in Deep Fluidized Beds

Agu, C. E., Pfeifer, C., Eikeland, M. S., et al. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04370 · Cited by 27

Determination of the density of porous particles using very fine dense powders

Buczek, B., & Geldart, D. (1986) · Powder Technology · doi:10.1016/0032-5910(66)80010-4 · Cited by 27

A single radiotracer particle method for the determination of solids circulation rate in interconnected fluidized beds

Abellón, R. D., Kolar, Z. I., den Hollander, W., et al. (1997) · Powder Technology · doi:10.1016/s0032-5910(97)03217-8 · Cited by 27

CHARACTERIZING FLUIDIZATION BY THE BED COLLAPSING METHOD

YANG, Z., Tung, Y., & Kwauk, M. (1985) · Chemical Engineering Communications · doi:10.1080/00986448508911672 · Cited by 27

Binderless granulation of pharmaceutical lactose powders

Takano, K., Nishii, K., Mukoyama, A., et al. (2002) · Powder Technology · doi:10.1016/s0032-5910(01)00418-1 · Cited by 27

Towards a generalized model for vertical walls to gas—solid fluidized beds heat transfer—II. Radiative transfer and temperature effects

Flamant, G., Lu, J., & Variot, B. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)81070-c · Cited by 27

A new choking velocity correlation for vertical pneumatic conveying

Day, J., Littman, H., & Morgan, M. H. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)87105-2 · Cited by 27

Experimental studies and CFD simulations of conical spouted bed hydrodynamics

Wang, Z. (2010) · cIRcle (University of British Columbia) · doi:10.14288/1.0059036 · Cited by 27

Optimization of Carrier-Based Dry Powder Inhaler Performance: A Review

Mehta, T., Najafian, S., Patel, K., et al. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17010096 · Cited by 26

Critical review of CaO/Ca(OH)2 thermochemical energy storage material

Jia, Y. S., Wang, Y., Zhou, X., et al. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115678 · Cited by 26

Fluid bed drying and agglomeration of phytopharmaceutical compositions

Benelli, L., Cortés-Rojas, D. F., Souza, C. R. F., et al. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.12.022 · Cited by 26

Model for Calculation of Agglomerate Sizes of Nanoparticles in a Vibro‐fluidized Bed

Wang, H., Zhou, T., Yang, J., et al. (2010) · Chemical Engineering & Technology · doi:10.1002/ceat.200900453 · Cited by 26

Multi-fluid Modeling Biomass Fast Pyrolysis in the Fluidized-Bed Reactor Including Particle Shrinkage Effects

Zhong, H., Zhang, J., Zhu, Y., et al. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00914 · Cited by 26

LDV measurements of particle velocity distribution and annular film thickness in a turbulent fluidized bed

Li, Y., Li, T., Zhang, H., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.10.028 · Cited by 26

Using dilute spouting for fabrication of highly filled metal-polymer composite materials

Eichner, E., Salikov, V., Bassen, P., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.12.028 · Cited by 26

Recent advances in fluidized bed drying

Haron, N. S., Zakaria, J. H., & Batcha, M. F. M. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/243/1/012038 · Cited by 26

Investigating the flow structures in semi-cylindrical bubbling fluidized bed using pressure fluctuation signals

Okhovat-Alavian, S. M., Behin, J., & Mostoufi, N. (2019) · Advanced Powder Technology · doi:10.1016/j.apt.2019.04.004 · Cited by 26

Experimental investigation of fluidized bed dynamics under resonant frequency of sound waves

Al‐Ghurabi, E. H., Ali, S. S., Alfadul, S. M., et al. (2019) · Advanced Powder Technology · doi:10.1016/j.apt.2019.08.028 · Cited by 26

Predicting cold gas-solid flow in a pilot-scale dual-circulating fluidized bed: Validation of computational particle fluid dynamics model

Zafiryadis, F., Jensen, A. D., Laxminarayan, Y., et al. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.11.070 · Cited by 26

Antioxidant activities of spray-dried carotenoids using maltodextrin-Arabic gum as wall materials

González-Peña, M. A., Lozada‐Ramírez, J. D., & Ortega-Regules, A. E. (2021) · Bulletin of the National Research Centre/Bulletin of the National Research Center · doi:10.1186/s42269-021-00515-z · Cited by 26

Data-Driven Prediction of Minimum Fluidization Velocity in Gas-Fluidized Beds Using Data Extracted by Text Mining

Zhou, J., Liu, D., Ye, M., & Liu, Z. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02307 · Cited by 26

On the fluidization of cohesive powders: Differences and similarities between micro‐ and nano‐sized particle gas–solid fluidization

Kamphorst, R., Wu, K., Salameh, S., Meesters, G. M. H., & van Ommen, J. R. (2022) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.24615 · Cited by 26

CFD simulation and experimental validation of multiphase flow in industrial cyclone preheaters

Mirzaei, M., Clausen, S., Wu, H., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.142757 · Cited by 26

Effect of particle size polydispersity on the yield stress of magnetofluidized beds as depending on the magnetic field orientation

Espin, M. J., Quintanilla, M. A. S., & Valverde, J. M. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.124 · Cited by 26

Defining the Critical Material Attributes of Lactose Monohydrate in Carrier Based Dry Powder Inhaler Formulations Using Artificial Neural Networks

Kinnunen, H. M., Hebbink, G. A., Peters, H., et al. (2014) · AAPS PharmSciTech · doi:10.1208/s12249-014-0108-9 · Cited by 26

Noninvasive Measurements of Gas Exchange in a Three-Dimensional Fluidized Bed by Hyperpolarized 129Xe NMR

Pavlin, T., Wang, R., McGorty, R. J., et al. (2007) · Applied Magnetic Resonance · doi:10.1007/s00723-007-0002-7 · Cited by 26

Fluorine and Carbon Codoped Macroporous Titania Microspheres: Highly Effective Photocatalyst for the Destruction of Airborne Styrene under Visible Light

Lim, M., Zhou, Y., Wood, B., Guo, Y., Wang, L., Rudolph, V., & Lu, G. Q. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp807983a · Cited by 25

Lokaler Blasengas‐Holdup und Expansionsverhalten von Gas/Feststoff‐Wirbelschichten

Hilligardt, K., & Werther, J. (1985) · Chemie Ingenieur Technik · doi:10.1002/cite.330570713 · Cited by 26

Experimental and modeling study of fluidized bed granulation: Effect of binder flow rate and fluidizing air velocity

Vengateson, U., & Mohan, R. (2016) · Resource-Efficient Technologies · doi:10.1016/j.reffit.2016.10.003 · Cited by 26

Prediction of the minimum fluidization velocity of particles of sugarcane bagasse

Pérez, N. P., Pedroso, D. T., Machín, E. B., et al. (2018) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2017.12.004 · Cited by 26

Energy storage based on SrCO3 and Sorbents—A probabilistic analysis towards realizing solar thermochemical power plants

Meroueh, L., Yenduru, K., Dasgupta, A., Jiang, D., & AuYeung, N. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.10.071 · Cited by 26

Gas distributor and bed material effects in a cold flow model of a novel multi-stage biomass gasifier

Dhrioua, M., Hassen, W., Kolsi, L., et al. (2019) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2019.05.001 · Cited by 26

Numerical study on granule aggregation and breakage in fluidized bed granulation by a novel PBM with DEM-CFD coupling approach

Hayashi, K., Nakamura, H., & Watano, S. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.11.027 · Cited by 26

Prediction and optimisation of syngas production from air gasification of Napier grass via stoichiometric equilibrium model

Said, M. S. M., Ghani, W. A. W. A. K., Tan, H. B., & Ng, D. K. S. (2020) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2020.100057 · Cited by 26

Co-combustion of oil palm trunk biocoal/sub-bituminous coal fuel blends

Nudri, N. A., Ghani, W. A. W. A. K., Bachmann, R. T., Baharudin, B. T. H. T., Ng, D. K. S., & Said, M. S. M. (2020) · Energy Conversion and Management X · doi:10.1016/j.ecmx.2020.100072 · Cited by 28

Granular temperature distribution in a gas fluidized bed of hollow microparticles prior to onset of bubbling

Xie, L., Biggs, M. J., Glass, D. H., et al. (2006) · Europhysics Letters (EPL) · doi:10.1209/epl/i2005-10526-y · Cited by 26

HYDRODYNAMICS OF FLUIDIZATION: EXPERIMENTAL AND THEORETICAL BUBBLE SIZES IN A TWO-DIMENSIONAL BED WITH A JET

Gidaspow, D., Seo, Y., & ETTEHADIEH, B. (1983) · Chemical Engineering Communications · doi:10.1080/00986448308940060 · Cited by 50

Hydrodynamics of fluidization: Fast-bubble simulation in a two-dimensional fluidized bed

Bouillard, J. X., Gidaspow, D., & Lyczkowski, R. W. (1991) · Powder Technology · doi:10.1016/0032-5910(91)80092-w · Cited by 27

Analysis of solid particle mixing in inclined fluidized beds using DEM simulation

Chaikittisilp, W., Taenumtrakul, T., Boonsuwan, P., et al. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.05.006 · Cited by 54

Drift flux in gas—liquid—solid fluidized systems from the dynamics of bed collapse

Chen, Y., & Fan, L. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)85016-7 · Cited by 18

Extension of a model for the distribution of voidage around bubbles in a fluidized bed

Rautenbach, C., Jayarathna, C. K., Melaaen, M. C., et al. (2011) · WIT transactions on engineering sciences · doi:10.2495/mpf110161