Types of gas fluidization

The effect of particle size and size distribution on the behaviour of gas-fluidised beds

Geldart, D. (1972) · Powder Technology · doi:10.1016/0032-5910(72)83014-6 · Cited by 285

The mechanics of fluidized beds. I. The stability of the state of uniform fluidization

Jackson, R. (1963) · Medical Entomology and Zoology · Cited by 180

Cloud formation around bubbles in gas fluidized beds

Rowe, P. N., Partridge, B. A., & Lyall, E. A. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85104-6 · Cited by 109

Shock waves as a criterion for the transition from homogeneous to heterogeneous fluidization

Verloop, J., & Heertjes, P. M. (1970) · Chemical Engineering Science · doi:10.1016/0009-2509(70)85117-x · Cited by 107

Hydrodynamic Stability of a Fluidized Bed

Pigford, R. L., & Baron, T. (1965) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160013a014 · Cited by 102

The gas fluidisation of large particles

Geldart, D., & Cranfield, R. R. (1972) · The Chemical Engineering Journal · doi:10.1016/0300-9467(72)85024-x · Cited by 49

Bubble velocities and bed expansions in freely bubbling fluidised beds

Godard, K., & Richardson, J. F. (1969) · Chemical Engineering Science · doi:10.1016/0009-2509(69)80059-x · Cited by 33

Viscosity of Suspensions of Gas-Fluidized Spheres

Hagyard, T., & Sacerdote, A. M. (1966) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160020a012 · Cited by 31

Laboratory Prediction of Flow Properties of Fluidized Solids

Diekman, R., & Forsythe, W. L. (1953) · Industrial & Engineering Chemistry · doi:10.1021/ie50522a020 · Cited by 28

The fluidization of light solids by gases under pressure and heavy solids by water

Simpson, H. C., & Rodger, B. W. (1961) · Chemical Engineering Science · doi:10.1016/0009-2509(61)80028-6 · Cited by 22

Gas Pressure Measurements Inside an Aerated Hopper

Donsı̀, G., Ferrari, G., Poletto, M., et al. (2004) · Process Safety and Environmental Protection · doi:10.1205/026387604772803089 · Cited by 37

Prediction of minimum fluidization velocity for fine tailings materials

Gupta, S. K., Agarwal, V. K., Singh, S. N., et al. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.08.003 · Cited by 37

Two-phase heat transfer model of a beam-down gas-solid fluidized bed solar particle receiver

Briongos, J. V., Gómez-Hernández, J., González-Gómez, P. Á., et al. (2018) · Solar Energy · doi:10.1016/j.solener.2018.07.016 · Cited by 37

Drying of Biomass Particles: Experimental Study and Comparison of the Performance of a Conventional Fluidized Bed and a Rotating Fluidized Bed in a Static Geometry

Eliaers, P., & Wilde, J. D. (2013) · Drying Technology · doi:10.1080/07373937.2012.726304 · Cited by 37

Dynamic similarity rules: Validity check for bubbling and slugging fluidized beds

Felice, R. D., Rapagnà, S., & Foscolo, P. U. (1992) · Powder Technology · doi:10.1016/0032-5910(92)88034-f · Cited by 37

Effects of gas type and temperature on fine particle fluidization

Xu, C. C., & Zhu, J. (2006) · 中国颗粒学报：英文版 · doi:10.1016/s1672-2515(07)60249-8 · Cited by 37

Hydrodynamics of beds of small particles in the voids of coarse particles

Mandal, D., Vinjamur, M., & Sathiyamoorthy, D. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.10.029 · Cited by 37

Heat-transfer from horizontal tube bundles into fluidized beds with Geldart A lignite particles

Lechner, S., Merzsch, M., & Krautz, H. J. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.10.041 · Cited by 37

Sound-assisted aeration of beds of cohesive solids

Chirone, R., & Massimilla, L. (1994) · Chemical Engineering Science · doi:10.1016/0009-2509(94)85089-5 · Cited by 37

Modelling fluidized bed elutriation of fine particles

Santana, D., Rodrı́guez, J. M., & Macı́as-Machı́n, A. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00057-1 · Cited by 37

Pressure and Temperature Effects in Fluid-Particle Systems

Knowlton, T. M. (1999) · Elsevier eBooks · doi:10.1016/b978-081551427-5.50004-1 · Cited by 37

Solar calcium looping cycle for CO2 capturing in a cement plant. Definition of process parameters and reactors selection

Duarte, J. P. R., Kriechbaumer, D., Lachmann, B., Tescari, S., Fend, T., Roeb, M., & Sattler, C. (2022) · Solar Energy · doi:10.1016/j.solener.2022.04.031 · Cited by 36

Agglomeration detection by pressure fluctuation analysis during Cynara cardunculus L. gasification in a fluidized bed

Gómez-Hernández, J., Serrano, D., Soria-Verdugo, A., et al. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.09.044 · Cited by 36

Feasibility study of a spouted bed gasification plant

Bernocco, D., Bosio, B., & Arato, E. (2012) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2012.09.012 · Cited by 36

Numerical simulation of flow behavior of agglomerates in gas–cohesive particles fluidized beds using agglomerates-based approach

Lu, H., Shuyan, W., Jianxiang, Z., et al. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.10.019 · Cited by 36

A CFD approach on the effect of particle size on char entrainment in bubbling fluidised bed reactors

Papadikis, K., Gu, S., & Bridgwater, A. V. (2009) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.09.007 · Cited by 36

Process analysis of fine coal preparation using a vibrated gas-fluidized bed

Yang, X., Fu, Z., Zhao, J., et al. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.03.047 · Cited by 36

Evaluation of a filtered model for the simulation of large scale bubbling and turbulent fluidized beds

Cloete, S. W. P., Johansen, S. T., & Amini, S. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.09.027 · Cited by 36

MODELING AND SIMULATION OF FLUID CATALYTIC CRACKING UNIT

Gupta, R., Kumar, V., & Srivastava, V. K. (2005) · Reviews in Chemical Engineering · doi:10.1515/revce.2005.21.2.95 · Cited by 36

Production of spherical mesoporous molecularly imprinted polymer particles containing tunable amine decorated nanocavities with CO2 molecule recognition properties

Nabavi, S. A., Vladisavljević, G. T., Eguagie, E. M., Li, B., Georgiadou, S., & Manovic, V. M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.07.054 · Cited by 37

Laser Additive Manufacturing Processes for Near Net Shape Components

Riveiro, A., del Val, J., Comesaña, R., Lusquiños, F., Quintero, F., Boutinguiza, M., & Pou, J. (2019) · Materials forming, machining and tribology · doi:10.1007/978-3-030-10579-2_5 · Cited by 36

Uniform and Size‐Controlled Synthesis of Pt Nanoparticle Catalyst by Fluidized Bed Reactor Atomic Layer Deposition for PEMFCs

Lee, W., Bera, S., Shin, H., Hong, W., Oh, S., Wan, Z., & Kwon, S. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201901210 · Cited by 36

Pollutant emissions released during sewage sludge combustion in a bubbling fluidized bed reactor

Soria-Verdugo, A., Kauppinen, J., Soini, T., et al. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.036 · Cited by 36

Experimental study of MgO/Mg(OH)2 thermochemical heat storage with direct heat transfer mode

Yan, J.-M., Pan, Z. H., & Zhao, C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115356 · Cited by 36

Effect of particle shape on biomass pyrolysis in a bubbling fluidized bed

Soria-Verdugo, A., Cano-Pleite, E., Passalacqua, A., et al. (2023) · Fuel · doi:10.1016/j.fuel.2022.127365 · Cited by 36

Waste oleaster seed-derived activated carbon mixed with coarse particles of fluid catalytic cracking as a highly-efficient CO2 adsorbent at low temperatures

Athari, M.-J., Tahmasebpoor, M., Azimi, B., Heidari, M. A., & Pevida, C. (2023) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2023.08.062 · Cited by 38

Preliminary Design and Performance Analysis of a Multi-megawatt Scale Dense Particle Suspension Receiver

Gallo, A., Spelling, J., Romero, M., et al. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.03.045 · Cited by 36

Catalysts for dual fluidised bed biomass gasification—an experimental study at the pilot plant scale

Pfeifer, C., Koppatz, S., & Hofbauer, H. (2011) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-011-0005-3 · Cited by 36

Mimicking Lotus Leaf: Development of Micro‐Nanostructured Biomimetic Superhydrophobic Polymeric Surfaces by Ultrafine Powder Coating Technology

Mozumder, M. S., Zhang, H., & Zhu, J. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100080 · Cited by 36

Rise velocities of bubbles and slugs in gas-fluidised beds: Ultra-fast magnetic resonance imaging

Müller, C. R., Davidson, J. F., Dennis, J. S., et al. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.019 · Cited by 36

The effect of mechanical vibration on gas fluidization of a fine aeratable powder

Barletta, D., Donsı̀, G., Ferrari, G., et al. (2008) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2007.10.002 · Cited by 36

Sound-Assisted Fluidization of SiO2 Nanoparticles with Different Surface Properties

Liu, H., Guo, Q., & Chen, S. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0608859 · Cited by 36

Characterization of pure cheese snacks and expanded granule powders textured by the instant controlled pressure drop (DIC) process

Mounir, S., Halle, D., & Allaf, K. S. (2011) · Dairy Science and Technology · doi:10.1007/s13594-011-0023-8 · Cited by 36

The Effect of Vibration on Dry Coal Beneficiation in the Reflux Classifier

Macpherson, S. A., & Galvin, K. P. (2010) · International Journal of Coal Preparation and Utilization · doi:10.1080/19392691003776814 · Cited by 36

Electrostatic effect on the flow behavior of a dilute gas/cohesive particle flow system

Zhang, Y., Yang, Y., & Arastoopour, H. (1996) · AIChE Journal · doi:10.1002/aic.690420610 · Cited by 36

Continuous drying of a fine particles-water slurry in a powder-particle fluidized bed.

Nakagawa, N., Ohsawa, K., Takarada, T., et al. (1992) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.25.495 · Cited by 36

CFD-DEM study of the effects of solid properties and aeration conditions on heat transfer in fluidized bed

Xue, J., Xie, L., Shao, Y., et al. (2020) · Advanced Powder Technology · doi:10.1016/j.apt.2020.08.002 · Cited by 35

Convective solids transport in large diameter gas fluidized beds

Werther, J. (1976) · Powder Technology · doi:10.1016/0032-5910(76)80044-7 · Cited by 35

Application of the Numerical Techniques for Modelling Fluidization Process Within Industrial Scale Boilers

Adamczyk, W. P. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-016-9186-z · Cited by 35

Comparing flow regime transition of magnetized fluidized bed with Geldart-B particles between magnetization-FIRST and -LAST operation modes

Zhu, Q., Zhu, Q., Li, H., et al. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.053 · Cited by 35

Recurrent neural network based detection of faults caused byparticle attrition in chemical looping systems

Pan, J., Pottimurthy, Y., Wang, D., Hwang, S., Patil, S., & Fan, L. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.03.038 · Cited by 36

Thiophene conversion under mild conditions over a ZSM-5 catalyst

Jaimes, L., Ferreira, M. L., & de Lasa, H. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.01.070 · Cited by 35

Impact of material property and operating conditions on mass flux profiles of monodisperse and polydisperse Group B particles in a CFB riser

Chew, J. W., Hays, R., Findlay, J. G., et al. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.07.040 · Cited by 35

Particle size-based segregation of pharmaceutical powders in a vertical chute with a closed bottom: An experimental evaluation

Jaklič, M., Kočevar, K., Srčič, S., & Dreu, R. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.03.021 · Cited by 35

Quality of fluidization in gas–solid unary and packed fluidized beds: An experimental study using gamma ray transmission technique

Mandal, D., Sharma, V., Pant, H. J., et al. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.04.022 · Cited by 35

Numerical analysis of particle mixing in a rotating fluidized bed

Nakamura, H., Tokuda, T., Iwasaki, T., et al. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.02.043 · Cited by 35

A new modeling approach for the prediction of yeast drying rates in fluidized beds

Debaste, F., Halloin, V., Bossart, L., et al. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2007.05.022 · Cited by 35

Investigation of proper modeling of very dense granular flows in the recirculation system of CFBs

Nikolopoulos, A., Nikolopoulos, N., Varveris, N., et al. (2012) · Particuology · doi:10.1016/j.partic.2012.09.001 · Cited by 35

A DEM-based approach for analyzing energy transitions in granular and particle-fluid flows

Hou, Q., Kuang, S., & Yu, A. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.12.017 · Cited by 35

Fluidized Bed Coating and Granulation

Turton, R. A., Tardos, G. I., & Ennis, B. J. (1999) · Elsevier eBooks · doi:10.1016/b978-081551427-5.50008-9 · Cited by 35

Computational investigation of slugging behaviour in gas-fluidised beds

Zhang, S. J., & Yu, A. (2002) · Powder Technology · doi:10.1016/s0032-5910(01)00445-4 · Cited by 35

Fluidization characteristics of dolomite and calcined dolomite particles

Hartman, M., Trnka, O., & Svoboda, K. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00409-7 · Cited by 35

Influence of pressure, fluidization velocity and particle size on the hydrodynamics of a freely bubbling fluidized bed

Wiman, J., & Almstedt, A.-E. (1998) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00056-6 · Cited by 35

The fluidization behaviour of ignimbrite at high temperature and with mechanical agitation

Druitt, T. H., Bruni, G., Lettieri, P., et al. (2004) · Geophysical Research Letters · doi:10.1029/2003gl018593 · Cited by 35

Fluidization of cryogels in a conical column

Venkatesh, R. D., Chaouki, J., & Klvana, D. (1996) · Powder Technology · doi:10.1016/s0032-5910(96)03181-6 · Cited by 35

Modelling and Simulation of Two-Phase Fluidized Bed Reactors

Grace, J. R. (1986) · Springer eBooks · doi:10.1007/978-94-009-4400-8_7 · Cited by 35

Challenge problem: 1. Model validation of circulating fluidized beds

Panday, R., Shadle, L. J., Shahnam, M., et al. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.02.010 · Cited by 34

Prediction of the combustion process in fluidized bed based on physical–chemical properties of biomass particles and their hydrodynamic behaviors

Pécora, A. A. B., Ávila, I., Lira, C. S., et al. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.03.003 · Cited by 34

A review of underlying fundamentals in a wet dispersion size analysis of powders

Tinke, A. P., Govoreanu, R., Weuts, I., et al. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.08.005 · Cited by 34

Behavior and fluidization of the cohesive powders: agglomerates sizes approach

Turki, D., & Fatah, N. (2008) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322008000400007 · Cited by 34

A study on combustion of oil palm empty fruit bunch in a fluidized bed using alternative bed materials: Performance, emissions, and time-domain changes in the bed condition

Ninduangdee, P., & Kuprianov, V. I. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.063 · Cited by 34

Defluidization in fluidized bed gasifiers using high-alkali content fuels

Narayan, V., Jensen, P. A., Henriksen, U. B., et al. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.05.009 · Cited by 34

On the role of forces governing particulate interactions in pharmaceutical systems: A review

Sarkar, S., Mukherjee, R., & Chaudhuri, B. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.003 · Cited by 35

Structure-dependent analysis of energy dissipation in gas-solid flows: Beyond nonequilibrium thermodynamics

Tian, Y., Geng, J., & Wang, W. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.05.037 · Cited by 34

Computational particle-fluid dynamics simulation of gas-solid flow in a circulating fluidized bed with air or O2/CO2 as fluidizing gas

Upadhyay, M., Park, H. C., Hwang, J. G., et al. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.06.021 · Cited by 34

Magnetic resonance imaging of gas–solid fluidization with liquid bridging

Boyce, C. M., Penn, A., Pruessmann, K. P., et al. (2017) · AIChE Journal · doi:10.1002/aic.16036 · Cited by 34

Characteristic gas velocity and fluidization quality evaluation of vibrated dense medium fluidized bed for fine coal separation

Zhou, E., Zhang, Y., Zhao, Y., et al. (2018) · Advanced Powder Technology · doi:10.1016/j.apt.2018.01.017 · Cited by 34

Single‐particle motion and heat transfer in fluidized beds

Wong, Y. S., & SEVILLE, J. P. K. (2006) · AIChE Journal · doi:10.1002/aic.11012 · Cited by 34

Two-fluid modeling of Geldart A particles in gas–solid micro-fluidized beds

Liu, X., Zhu, C., Geng, S., et al. (2014) · Particuology · doi:10.1016/j.partic.2014.05.012 · Cited by 34

Local instantaneous and time-averaged heat transfer in a pressurized fluidized bed with horizontal tubes: Influence of pressure, fluidization velocity and tube-bank geometry

Olsson, S., & Almstedt, A.-E. (1995) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00150-4 · Cited by 34

Energy storage with PCM in fluidized beds: Modeling and experiments

Izquierdo-Barrientos, M. A., Sobrino, C., & Almendros-Ibáñez, J. A. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.107 · Cited by 34

A new model for the prediction of the behaviour of fluidized beds

Brandani, S., & Zhang, K. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.01.011 · Cited by 34

MAGNETIC FIELD ASSISTED FLUIDIZATION – A UNIFIED APPROACH Part 2. Solids Batch Gas-Fluidized Beds: Versions and Rheology.

Hristov, J. Y. (2003) · Reviews in Chemical Engineering · doi:10.1515/revce.2003.19.1.1 · Cited by 34

Flow Phenomena in the Dripping Zone of Blast Furnace − A Review

Ghosh, S., Viswanathan, N. N., & Ballal, N. B. (2017) · steel research international · doi:10.1002/srin.201600440 · Cited by 34

Collaborative optimization of vibration and gas flow on fluidization quality and fine coal segregation in a vibrated dense medium fluidized bed

Zhou, E., Zhang, Y., Zhao, Y., et al. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.09.034 · Cited by 34

Improvement of the fluidisability of Ni/SiO2 aerogels by reducing interparticle forces

Lauga, C., Chaouki, J., Klvana, D., et al. (1991) · Powder Technology · doi:10.1016/0032-5910(91)80208-z · Cited by 34

Hydrodynamic dependence on riser diameter for different particles in circulating fluidized beds

Xu, G., Nomura, K., Nakagawa, N., et al. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00317-4 · Cited by 34

Surface-to-bed heat transfer in fluidised beds: Effect of surface shape

Natale, F. D., Lancia, A., & Nigro, R. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.01.010 · Cited by 34

The Ups and Downs of Gas-Solid Flow - A Review

Leung, L. S. (1980) · Springer eBooks · doi:10.1007/978-1-4684-1045-7_2 · Cited by 34

Transport phenomena in multi-particle systems—III. Active particle mass transfer in fluidized beds of inert particles

Agarwal, P. K., Mitchell, W. J., & Nauze, R. D. L. (1988) · Chemical Engineering Science · doi:10.1016/0009-2509(88)85185-6 · Cited by 34

Heat transfer to immersed surfaces in gas-fluidized beds of large particles and powder characterization

Saxena, S. C., & Ganzha, V. L. (1984) · Powder Technology · doi:10.1016/0032-5910(84)85037-8 · Cited by 34

THE HYDRODYNAMICS OF RE-CIRCULATING FLUIDIZED BEDS

Rhodes, M. J., & Geldart, D. (1986) · Elsevier eBooks · doi:10.1016/b978-0-08-031869-1.50023-5 · Cited by 34

Impact of particle properties on gas solid flow in the whole circulating fluidized bed system

Wang, P., Yao, X., Yang, H., et al. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.06.065 · Cited by 33

Characterization of Particle Fluidization Pattern in a Gas Solid Fluidized Bed Based on Acoustic Emission (AE) Measurement

Wang, J., Ren, C., Yang, Y., et al. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8018774 · Cited by 33

Mesh size effect on CFD simulation of gas-fluidized Geldart A particles

Sande, P. C., & Ray, S. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.05.019 · Cited by 33

The crucial role of frictional stress models for simulation of bubbling fluidized beds

Farzaneh, M., Almstedt, A.-E., Johnsson, F., et al. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.09.050 · Cited by 33

CO2 capture enhancement in a fluidized bed of a modified Geldart C powder

Valverde, J. M., Durán-Olivencia, F. J., Pontiga, F., et al. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.02.060 · Cited by 33

Measurement of Flow Characteristics in a Bubbling Fluidized Bed Using Electrostatic Sensor Arrays

Zhang, W., Yan, Y. G., Yang, Y., et al. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2514698 · Cited by 33

Fluidized-bed measurements of carefully-characterized, mildly-cohesive (Group A) particles

LaMarche, C. Q., Liu, P., Kellogg, K. M., et al. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.119 · Cited by 33

Experiments In The Classroom: Examples Of Inductive Learning With Classroom Friendly Laboratory Kits

Piergiovanni, P. R., & Moor, S. S. (2020) · doi:10.18260/1-2--11569 · Cited by 33

Fluid dynamic study of mixtures of sugarcane bagasse and sand particles: Minimum fluidization velocity

Pérez, N. P., Pedroso, D. T., Machín, E. B., et al. (2017) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2017.08.015 · Cited by 33

Photocatalytic water splitting in a fluidized bed system: Computational modeling and experimental studies

Reilly, K., Wilkinson, D. P., & Taghipour, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.020 · Cited by 33

Physical and thermal characterization of ground bark and ground wood particles

Rezaei, H., & Sokhansanj, S. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.06.038 · Cited by 34

Particle mixing in bubbling fluidized bed reactors with continuous particle exchange

Höfer, G., Märzinger, T., Eder, C., et al. (2018) · Chemical Engineering Science · doi:10.1016/j.ces.2018.10.001 · Cited by 33

Magnetic resonance imaging of single bubbles injected into incipiently fluidized beds

Boyce, C. M., Penn, A., Lehnert, M., et al. (2019) · Chemical Engineering Science · doi:10.1016/j.ces.2019.01.047 · Cited by 33

Gravitational instabilities in binary granular materials

McLaren, C. P., Kovar, T. M., Penn, A., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1820820116 · Cited by 33

Carbon nanotube: Controlled synthesis determines its future

Zhang, S., Qian, L., Zhao, Q., Wang, Z., Lin, D., Liu, W., Chen, Y., & Zhang, J. (2019) · Science China Materials · doi:10.1007/s40843-019-9581-4 · Cited by 34

Impact of Powder Properties on the Rheological Behavior of Excipients

Janssen, P. H. M., Depaifve, S., Neveu, A., et al. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13081198 · Cited by 33

Cratering of a particle bed by a subsonic turbulent jet: Effect of particle shape, size and density

LaMarche, C. Q., & Curtis, J. S. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.08.030 · Cited by 33

Hydrodynamic viability of chemical looping processes by means of cold flow model investigation

Bischi, A., Langørgen, Ø., Morin, J.-X., et al. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.12.051 · Cited by 33

HYDRODYNAMICS OF FLUIDIZATION: EXPERIMENTAL AND THEORETICAL BUBBLE SIZES IN A TWO-DIMENSIONAL BED WITH A JET

Gidaspow, D., Seo, Y., & ETTEHADIEH, B. (1983) · Chemical Engineering Communications · doi:10.1080/00986448308940060 · Cited by 50

Hydrodynamics of fluidization: Fast-bubble simulation in a two-dimensional fluidized bed

Bouillard, J. X., Gidaspow, D., & Lyczkowski, R. W. (1991) · Powder Technology · doi:10.1016/0032-5910(91)80092-w · Cited by 27

Analysis of solid particle mixing in inclined fluidized beds using DEM simulation

Chaikittisilp, W., Taenumtrakul, T., Boonsuwan, P., et al. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.05.006 · Cited by 54

Drift flux in gas—liquid—solid fluidized systems from the dynamics of bed collapse

Chen, Y., & Fan, L. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)85016-7 · Cited by 18

Extension of a model for the distribution of voidage around bubbles in a fluidized bed

Rautenbach, C., Jayarathna, C. K., Melaaen, M. C., et al. (2011) · WIT transactions on engineering sciences · doi:10.2495/mpf110161