Types of gas fluidization

The effect of particle size and size distribution on the behaviour of gas-fluidised beds

Geldart, D. (1972) · Powder Technology · doi:10.1016/0032-5910(72)83014-6 · Cited by 285

The mechanics of fluidized beds. I. The stability of the state of uniform fluidization

Jackson, R. (1963) · Medical Entomology and Zoology · Cited by 180

Cloud formation around bubbles in gas fluidized beds

Rowe, P. N., Partridge, B. A., & Lyall, E. A. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85104-6 · Cited by 109

Shock waves as a criterion for the transition from homogeneous to heterogeneous fluidization

Verloop, J., & Heertjes, P. M. (1970) · Chemical Engineering Science · doi:10.1016/0009-2509(70)85117-x · Cited by 107

Hydrodynamic Stability of a Fluidized Bed

Pigford, R. L., & Baron, T. (1965) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160013a014 · Cited by 102

The gas fluidisation of large particles

Geldart, D., & Cranfield, R. R. (1972) · The Chemical Engineering Journal · doi:10.1016/0300-9467(72)85024-x · Cited by 49

Bubble velocities and bed expansions in freely bubbling fluidised beds

Godard, K., & Richardson, J. F. (1969) · Chemical Engineering Science · doi:10.1016/0009-2509(69)80059-x · Cited by 33

Viscosity of Suspensions of Gas-Fluidized Spheres

Hagyard, T., & Sacerdote, A. M. (1966) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160020a012 · Cited by 31

Laboratory Prediction of Flow Properties of Fluidized Solids

Diekman, R., & Forsythe, W. L. (1953) · Industrial & Engineering Chemistry · doi:10.1021/ie50522a020 · Cited by 28

The fluidization of light solids by gases under pressure and heavy solids by water

Simpson, H. C., & Rodger, B. W. (1961) · Chemical Engineering Science · doi:10.1016/0009-2509(61)80028-6 · Cited by 22

Operational issues in solids processing plants: Systems view

Wibowo, C., & Ng, K. M. (2001) · AIChE Journal · doi:10.1002/aic.690470112 · Cited by 33

Fractal formation description of agglomeration in low shear mixer

Rondet, É., Delalonde, M., Ruiz, T., et al. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.03.069 · Cited by 33

Sequential modeling of fluidized bed paddy dryer

Bizmark, N., Mostoufi, N., Sotudeh‐Gharebagh, R., et al. (2010) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2010.07.015 · Cited by 33

Solids velocity fields in a cold-flow Gas–Solid Vortex Reactor

Kovacevic, J. Z., Pantzali, M. N., Niyogi, K., Deen, N. G., Heynderickx, G. J., & Marin, G. B. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.10.020 · Cited by 33

Experimental Studies on Decomposing Properties of Desulfurization Gypsum in a Thermogravimetric Analyzer and Multiatmosphere Fluidized Beds

Zhu, M., Yang, H., Wu, Y., et al. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300092s · Cited by 33

Spray granulation for drug formulation

Loh, Z. H., Er, D. Z. L., Chan, L. W., et al. (2011) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2011.610304 · Cited by 33

Evaluation Of Fluidized Versus Spouted Bed Drying Of Baker'S Yeast

Grabowski, S., MUJUMDAR, A. S., Ramaswamy, H. S., et al. (1997) · Drying Technology · doi:10.1080/07373939708917250 · Cited by 33

Effets de differents parametres sur les vitesses de transition de la fluidisation en regime turbulent

Chehbouni, A., Chaouki, J., Guy, C., et al. (1995) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450730104 · Cited by 33

Diagnostic procedures for establishing the quality of fluidization of gas-solid systems

Saxena, S. C., Rao, N. S., & Tanjore, V. N. (1993) · Experimental Thermal and Fluid Science · doi:10.1016/0894-1777(93)90041-g · Cited by 33

Fluidization of fine powders with air in the particulate and the bubbling regions

Simone, S., & Harriott, P. (1980) · Powder Technology · doi:10.1016/0032-5910(80)85059-5 · Cited by 33

On the minimum bubbling voidage and the Geldart classification for gas-fluidised beds

Gibilaro, L. G., Felice, R. D., & Foscolo, P. U. (1988) · Powder Technology · doi:10.1016/0032-5910(88)80018-4 · Cited by 33

Typical Fluidization Characteristics for Geldart's Classification Groups

Shaul, S., Rabinovich, E., & Kalman, H. (2013) · Particulate Science And Technology · doi:10.1080/02726351.2013.842624 · Cited by 32

Fluidized bed with a rotating distributor operated under defluidization conditions

Gómez-Hernández, J., Soria-Verdugo, A., Briongos, J. V., et al. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.04.096 · Cited by 32

Annual performance of subcritical Rankine cycle coupled to an innovative particle receiver solar power plant

Reyes-Belmonte, M. A., Sebastián, A., Spelling, J., et al. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.06.109 · Cited by 32

Technical and environmental assessment of coated urea production with a natural polymeric suspension in spouted bed to reduce nitrogen losses

da Costa, T. P., Westphalen, G. D. F., Nora, F. B. D., ZORZI, B. D., & da Rosa, G. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.069 · Cited by 32

Influence of the fountain confiner in a conical spouted bed dryer

Estiati, I., Tellabide, M., Saldarriaga, J. F., et al. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.08.005 · Cited by 32

Scalable synthesis of zeolite-templated ordered microporous carbons without external carbon deposition for capacitive energy storage

Kwon, H. C., Choi, S., Wang, Y., Othman, R. M., & Choi, M. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110481 · Cited by 32

Three plugs model

Shaul, S., & Kalman, H. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.05.047 · Cited by 32

Segregation and agglomeration of Type C powders from homogeneously aerated Type A–C powder mixtures during fluidization

Kono, H. O., Huang, C.-C., Morimoto, E., et al. (1987) · Powder Technology · doi:10.1016/0032-5910(87)80090-6 · Cited by 32

Study on the fluidization and discharge characteristics of cohesive coals from an aerated hopper

Lu, H., Guo, X., Gong, X., et al. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.10.030 · Cited by 32

Characterization method of average gas–solid drag for regular and irregular particle groups

Nikku, M., Jalali, P., Ritvanen, J., et al. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.11.035 · Cited by 32

Determination of a particle size distribution criterion for predicting dense phase pneumatic conveying behaviour of granular and powder materials

Deng, T., & Bradley, M. S. A. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.05.001 · Cited by 32

Mesoscale Modeling

Wang, W., & Chen, Y. (2015) · Advances in chemical engineering · doi:10.1016/bs.ache.2015.10.009 · Cited by 40

Dual fibre optical probe measurements of solids volume fraction in a circulating fluidized bed

Magnusson, A., Rundqvist, R., Almstedt, A.-E., et al. (2005) · Powder Technology · doi:10.1016/j.powtec.2004.11.028 · Cited by 32

Silicon Chemical Vapor Deposition on macro and submicron powders in a fluidized bed

Cadoret, L., Reuge, N., Pannala, S., Syamlal, M., Rossignol, C., Dexpert‐Ghys, J., Coufort‐Saudejaud, C., & Caussat, B. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.04.083 · Cited by 34

Void formation in stationary and moving beds

MacDonald, J. F., & Bridgwater, J. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(96)00453-8 · Cited by 32

Axial dispersion of gas and solid phases in a gas—solid packed column at trickle flow

Roes, A. W. M., & Swaaij, W. P. M. V. (1979) · The Chemical Engineering Journal · doi:10.1016/0300-9467(79)80010-6 · Cited by 32

Aspen Plus Simulation of Biomass Gasification: a Comprehensive Model Incorporating Reaction Kinetics, Hydrodynamics and Tar Production

T, A. A. K., Suraj, P., Muraleedharan, C., et al. (2022) · Process Integration and Optimization for Sustainability · doi:10.1007/s41660-022-00291-x · Cited by 31

Pressure fluctuations in a gas-solid fluidized bed at temperatures up to 1650 °C

Fu, L., Zhang, Q., Xu, G., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143806 · Cited by 31

Exploration of improved, roller-based spreading strategies for cohesive powders in additive manufacturing via coupled DEM-FEM simulations

Weißbach, R., Praegla, P. M., Wall, W. A., et al. (2024) · Powder Technology · doi:10.1016/j.powtec.2024.119956 · Cited by 31

Research progress and prospect of fluidized bed metallic ore roasting technology: A review

Zhang, S., Zhou, T., Li, C., et al. (2024) · Fuel · doi:10.1016/j.fuel.2024.132717 · Cited by 31

Hydrodynamics of gas–solid flow in the circulating fluidized bed reactor for dry flue gas desulfurization

Zhou, Y., Peng, J., Zhu, X., et al. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.09.013 · Cited by 31

Surface geomorphology of Jupiter Family Comets: A geologic process perspective

CHENG, A. F., Lisse, C. M., & A’Hearn, M. F. (2012) · Icarus · doi:10.1016/j.icarus.2012.10.004 · Cited by 31

Characteristics of Minimum Fluidization Velocity for Magnetite Powder used in an Air Dense Medium Fluidized Bed for Coal Beneficiation

Mohanta, S., Daram, A. B., Chakraborty, S., et al. (2012) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201100020 · Cited by 31

A novel dry cleaning system for contaminated waste plastic purification in gas-solid media

Xia, D., & Zhang, F.-S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.028 · Cited by 32

Mathematical analysis of characteristic pressure fluctuations in a bubbling fluidized bed

Xiang, J., Li, Q., Ai-yue, W., et al. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.04.030 · Cited by 31

Profoundly Improved Plasticity and Tabletability of Griseofulvin by in Situ Solvation and Desolvation during Spherical Crystallization

Chen, H., Wang, C., & Sun, C. C. (2019) · Crystal Growth & Design · doi:10.1021/acs.cgd.9b00053 · Cited by 31

Experimental study on H2S adsorption on gasification char under different operative conditions

Marchelli, F., Cordioli, E., Patuzzi, F., Sisani, E., Barelli, L., Baratieri, M., Arato, E., & Bosio, B. (2019) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2019.05.003 · Cited by 31

Assessment of Drag Models for Geldart A Particles in Bubbling Fluidized Beds

Estejab, B., & Battaglia, F. (2015) · Journal of Fluids Engineering · doi:10.1115/1.4031490 · Cited by 31

Preparation and characterization of directly compactible layer-by-layer nanocoated cellulose

Strydom, S. J., Otto, D. P., Liebenberg, W., et al. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.10.056 · Cited by 31

Tomographic imaging of a conical fluidized bed of dry pharmaceutical granule

Wiens, J., & Pugsley, T. S. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.07.022 · Cited by 31

The memory of granular materials

Valverde, J. M., Castellanos, A., & Quintanilla, M. A. S. (2003) · Contemporary Physics · doi:10.1080/0010751031000155939 · Cited by 31

Particle Size, Moisture, and Fluidization Variations Described by Indirect In-line Physical Measurements of Fluid Bed Granulation

Lipsanen, T., Närvänen, T., Räikkönen, H., et al. (2008) · AAPS PharmSciTech · doi:10.1208/s12249-008-9147-4 · Cited by 31

The characteristics of particle charging and deposition during powder coating processes with ultrafine powder

Meng, X., Zhu, J., & Zhang, H. (2009) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/42/6/065201 · Cited by 31

Fluidization Characteristics of a Pulsing Dense-Phase Gas–Solid Fluidized Bed for High-Density Separation of Fine Anthracite

Dong, L., Zhou, E., Cai, L., et al. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b01468 · Cited by 31

The influence of temperature on the properties of the particulate phase at incipient fluidization

Raso, G., D’Amore, M., Formisani, B., et al. (1992) · Powder Technology · doi:10.1016/s0032-5910(92)85023-o · Cited by 31

Influence of particle size on the pressure fluctuations and slugging in a fluidized bed

Svoboda, K., Čermák, J., Hartman, M., et al. (1984) · AIChE Journal · doi:10.1002/aic.690300331 · Cited by 31

Advances in Fluidized Bed Photocatalysis: Bridging Gaps, Standardizing Metrics, and Shaping Sustainable Solutions for Environmental Challenges

Gusmão, C. D. A., Palharim, P. H., Diniz, L. A., et al. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c00821 · Cited by 30

A DEM study of bubble formation in Group B fluidized beds with and without cohesive inter-particle forces

Pandit, J. K., Wang, X. S., & Rhodes, M. J. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.013 · Cited by 30

Prediction of Agglomerate Size for Fine Particles in a Vibro-fluidized Bed.

Mawatari, Y., Ikegami, T., Tatemoto, Y., et al. (2003) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.36.277 · Cited by 30

Heat transfer in gas fluidized beds part 2. Dependence of heat transfer on gas velocity

Molerus, O. (1992) · Powder Technology · doi:10.1016/0032-5910(92)85049-2 · Cited by 30

Impact of particle diameter, density and sphericity on minimum pickup velocity of binary mixtures in gas-solid pneumatic conveying

Anantharaman, A., Cahyadi, A., Hadinoto, K., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.04.038 · Cited by 30

Numerical studies of the effects of fines on fluidization

Gu, Y., Özel, A., & Sundaresan, S. (2016) · AIChE Journal · doi:10.1002/aic.15229 · Cited by 30

Physical characterization and fluidization design parameters of wheat germ

Gili, R. D., Irigoyen, R. M. T., Penci, M. C., et al. (2017) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.05.011 · Cited by 30

Universal stability curve for pattern formation in pulsed gas-solid fluidized beds of sandlike particles

de Martín, L., Ottevanger, C. P., van Ommen, J. R., et al. (2018) · Physical Review Fluids · doi:10.1103/physrevfluids.3.034303 · Cited by 30

An investigation into the effect of particle size distribution on the fluidization behavior of Group C and Group A particles

Li, W., Wang, J., Zhou, Y., et al. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117142 · Cited by 30

Challenges of DEM: I. Competing bottlenecks in parallelization of gas–solid flows

Liu, P., & Hrenya, C. M. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.095 · Cited by 30

The influence of particle size on the flow of initially fluidised powders

Roche, O., Gilbertson, M. A., Phillips, J. C., et al. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.05.010 · Cited by 30

Favorable vibrated fluidization conditions for cohesive fine particles

Mawatari, Y., Tsunekawa, M., Tatemoto, Y., et al. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.04.026 · Cited by 30

Motion of a large object in a bubbling fluidized bed with a rotating distributor

Soria-Verdugo, A., García-Hernando, N., Almendros-Ibáñez, J. A., et al. (2011) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2011.05.004 · Cited by 30

Comparative study of the two-zone fluidized-bed reactor and the fluidized-bed reactor for oxidative coupling of methane over Mn/Na2WO4/SiO2 catalyst

Talebizadeh, A., Mortazavi, Y., & Khodadadi, A. A. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.06.021 · Cited by 30

Solids mixing behavior in a nano-agglomerate fluidized bed

Huang, C., Wang, Y., & Wei, F. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.05.030 · Cited by 30

Modeling of the Temperature Profile in an Ethylene Polymerization Fluidized-Bed Reactor in Condensed-Mode Operation

Zhou, Y., Wang, J., Yang, Y., et al. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302730a · Cited by 30

Single-step coprecipitation and coating to prepare curcumin formulations by supercritical fluid technology

Matos, R. L., Lu, T., Leeke, G. A., et al. (2020) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2020.104758 · Cited by 30

Characterization of gas fluidized beds of group C, A and B particles based on pressure fluctuations

Bai, D., Grace, J. R., & Zhu, J. (1999) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450770218 · Cited by 30

Emission characteristics of organic and heavy metal pollutants in fluidized bed incineration during the agglomeration/defluidization process

Lin, C.-L., Wey, M., & Yu, W.-J. (2005) · Combustion and Flame · doi:10.1016/j.combustflame.2005.05.009 · Cited by 30

Fluidization and entrainment of difficult-to-fluidize fine powdermixed with easy-to-fluidize large particles

Liu, Y.-D., & Kimura, S. (1993) · Powder Technology · doi:10.1016/0032-5910(93)80081-k · Cited by 30

MAGNETIC FIELD ASSISTED FLUIDIZATION – A UNIFIED APPROACH Part 3: Heat Transfer in Gas-Solid Fluidized Beds - a critical re-evaluation of the results

Hristov, J. Y. (2003) · Reviews in Chemical Engineering · doi:10.1515/revce.2003.19.3.229 · Cited by 30

Scaling relationships for fluidisation: the generalised particle bed model

Foscolo, P. U., Felice, R. D., Gibilaro, L. G., et al. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)80018-a · Cited by 30

Hydrodynamic behaviour of aerogel powders in high-velocity fluidized beds

Li, H., Legros, R., Brereton, C. M. H., et al. (1990) · Powder Technology · doi:10.1016/0032-5910(90)80137-n · Cited by 30

CFD-DEM study on agglomeration and spout-assisted fluidization of cohesive particles

Zou, Y., Zou, R., & Wu, Y. (2024) · Powder Technology · doi:10.1016/j.powtec.2024.119512 · Cited by 29

Defluidization and agglomeration of a fluidized bed reactor during Cynara cardunculus L. gasification using sepiolite as a bed material

Serrano, D., Sánchez-Delgado, S., Sobrino, C., & Marugán-Cruz, C. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.11.036 · Cited by 29

Granular dynamics of cohesive powders in a rotating drum as revealed by speckle visibility spectroscopy and synchronous measurement of forces due to avalanching

Yang, H. M., Jiang, G. L., Saw, H. Y., et al. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.02.023 · Cited by 29

Experimental Study and Numerical Simulation of Bubbling Fluidized Beds with Fine Particles in Two and Three Dimensions

Zou, Z., Li, H., Zhu, Q., et al. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303105v · Cited by 29

Investigation of CO2 adsorption performance and fluidization behavior of mesoporous silica supported polyethyleneimine

Quang, Đ. V., Soukri, M., Tanthana, J., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.06.027 · Cited by 29

Characterization of granular phase change materials for thermal energy storage applications in fluidized beds

Izquierdo-Barrientos, M. A., Sobrino, C., Almendros-Ibáñez, J. A., et al. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.081 · Cited by 29

Comparative study of two non-intrusive measurement methods for bubbling gas-solids fluidized beds: Electrical capacitance tomography and pressure fluctuations

Li, X., Jaworski, A. J., & Mao, X. (2017) · Flow Measurement and Instrumentation · doi:10.1016/j.flowmeasinst.2017.08.002 · Cited by 29

Effect of bed material density on the performance of steam gasification of biomass in bubbling fluidized beds

Soria-Verdugo, A., von Berg, L., Serrano, D., et al. (2019) · Fuel · doi:10.1016/j.fuel.2019.116118 · Cited by 29

Regimes of jetting and bubbling in a fluidized bed studied using real-time magnetic resonance imaging

Penn, A., Boyce, C. M., Pruessmann, K. P., et al. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123185 · Cited by 29

Modeling Axial Mixing of Fuel Particles in the Dense Region of a Fluidized Bed

Köhler, A., Pallarès, D., & Johnsson, F. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b04194 · Cited by 29

Multiscale modeling of microwave-heated multiphase systems

Goyal, H., & Vlachos, D. G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125262 · Cited by 29

Progress in enhanced fluidization process for particle coating via atomic layer deposition

Li, Z., Li, J., Liu, X., et al. (2020) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2020.108234 · Cited by 29

Different bubble behaviors in gas-solid fluidized bed of Geldart group A and group C+ particles

Zhou, Y., Xu, J., & Zhu, J. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.02.033 · Cited by 29

A hybrid multiphase model accounting for particle agglomeration for coarse-grid simulation of dense solid flow inside large-scale cyclones

Mirzaei, M., Jensen, P. A., Nakhaei, M., et al. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117186 · Cited by 29

Granular Patterns

Aranson, I. S., & Tsimring, L. S. (2008) · doi:10.1093/acprof:oso/9780199534418.001.0001 · Cited by 29

On impacts of solid properties and operating conditions on the performance of gas-solid fluidization systems

Wang, Y., Cheng, Y., Jin, Y., et al. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.09.015 · Cited by 29

Electrostatic Characteristics of Hydrated Lime Powder during Transport

Liang, S., Zhang, J., & Fan, L. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9506678 · Cited by 29

Development and potential of new generation photocatalytic systems for air pollution abatement: an overview

Lim, M., Zhou, Y., Wang, L., Rudolph, V., & Lu, G. Q. (2009) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.321 · Cited by 29

Impact of continuous particle size distribution width and particle sphericity on minimum pickup velocity in gas–solid pneumatic conveying

Anantharaman, A., Wu, X., Hadinoto, K., et al. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.03.022 · Cited by 29

CFD simulation of flow pattern and jet penetration depth in gas-fluidized beds with single and double jets

Zhang, K., Pei, P., Brandani, S., et al. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.09.018 · Cited by 29

A high efficiency particulate air filter based on agglomerated carbon nanotube fluidized bed

Wang, C., Li, P., Zong, Y., Zhang, Y., Li, S., & Wei, F. (2014) · Carbon · doi:10.1016/j.carbon.2014.07.086 · Cited by 29

CFD modelling of the fast pyrolysis of an in-flight cellulosic particle subjected to convective heat transfer

Papadikis, K., Gerhauser, H., Bridgwater, A. V., & Gu, S. (2008) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.04.021 · Cited by 29

Acoustic streaming in gas-fluidized beds of small particles

Valverde, J. M. (2013) · Soft Matter · doi:10.1039/c3sm50780g · Cited by 29

Experimental investigation of CO2 capture using sodium hydroxide particles in a fluidized bed

Naeem, S., Ghaemi, A., & Shahhosseini, S. (2016) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-015-0237-1 · Cited by 29

Positron emission particle tracking

Stein, M., Martin, T. W., SEVILLE, J. P. K., et al. (1997) · Elsevier eBooks · doi:10.1016/b978-044482521-6/50011-5 · Cited by 29

Model Based on Electrostatic Repulsion and Hydrogen Bond Forces To Estimate the Size of Nanoparticle Agglomerates in Fluidization

Tahmasebpoor, M., Abadi, R. G. S., Noupoor, Y. R., et al. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02792 · Cited by 29

Experimental study and discrete element method simulation of Geldart Group A particles in a small-scale fluidized bed

Li, T., Rabha, S. S., Verma, V., et al. (2017) · Advanced Powder Technology · doi:10.1016/j.apt.2017.09.003 · Cited by 29

Tadalafil nanocomposites as a dry powder formulation for inhalation, a new strategy for pulmonary arterial hypertension treatment

Rad, R. T., Dadashzadeh, S., Vatanara, A., Alavi, S., Ghasemian, E., & Mortazavi, S. A. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2019.04.001 · Cited by 29

Group C+ particles: Extraordinary dense phase expansion during fluidization through nano-modulation

Zhou, Y., & Zhu, J. (2019) · Chemical Engineering Science · doi:10.1016/j.ces.2019.115420 · Cited by 29

Hopper discharge of cohesive powders using pulsated airflow

Zhu, L., Lu, H., Poletto, M., et al. (2020) · AIChE Journal · doi:10.1002/aic.16240 · Cited by 29

HYDRODYNAMICS OF FLUIDIZATION: EXPERIMENTAL AND THEORETICAL BUBBLE SIZES IN A TWO-DIMENSIONAL BED WITH A JET

Gidaspow, D., Seo, Y., & ETTEHADIEH, B. (1983) · Chemical Engineering Communications · doi:10.1080/00986448308940060 · Cited by 50

Hydrodynamics of fluidization: Fast-bubble simulation in a two-dimensional fluidized bed

Bouillard, J. X., Gidaspow, D., & Lyczkowski, R. W. (1991) · Powder Technology · doi:10.1016/0032-5910(91)80092-w · Cited by 27

Analysis of solid particle mixing in inclined fluidized beds using DEM simulation

Chaikittisilp, W., Taenumtrakul, T., Boonsuwan, P., et al. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.05.006 · Cited by 54

Drift flux in gas—liquid—solid fluidized systems from the dynamics of bed collapse

Chen, Y., & Fan, L. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)85016-7 · Cited by 18

Extension of a model for the distribution of voidage around bubbles in a fluidized bed

Rautenbach, C., Jayarathna, C. K., Melaaen, M. C., et al. (2011) · WIT transactions on engineering sciences · doi:10.2495/mpf110161