Types of gas fluidization

The effect of particle size and size distribution on the behaviour of gas-fluidised beds

Geldart, D. (1972) · Powder Technology · doi:10.1016/0032-5910(72)83014-6 · Cited by 285

The mechanics of fluidized beds. I. The stability of the state of uniform fluidization

Jackson, R. (1963) · Medical Entomology and Zoology · Cited by 180

Cloud formation around bubbles in gas fluidized beds

Rowe, P. N., Partridge, B. A., & Lyall, E. A. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85104-6 · Cited by 109

Shock waves as a criterion for the transition from homogeneous to heterogeneous fluidization

Verloop, J., & Heertjes, P. M. (1970) · Chemical Engineering Science · doi:10.1016/0009-2509(70)85117-x · Cited by 107

Hydrodynamic Stability of a Fluidized Bed

Pigford, R. L., & Baron, T. (1965) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160013a014 · Cited by 102

The gas fluidisation of large particles

Geldart, D., & Cranfield, R. R. (1972) · The Chemical Engineering Journal · doi:10.1016/0300-9467(72)85024-x · Cited by 49

Bubble velocities and bed expansions in freely bubbling fluidised beds

Godard, K., & Richardson, J. F. (1969) · Chemical Engineering Science · doi:10.1016/0009-2509(69)80059-x · Cited by 33

Viscosity of Suspensions of Gas-Fluidized Spheres

Hagyard, T., & Sacerdote, A. M. (1966) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160020a012 · Cited by 31

Laboratory Prediction of Flow Properties of Fluidized Solids

Diekman, R., & Forsythe, W. L. (1953) · Industrial & Engineering Chemistry · doi:10.1021/ie50522a020 · Cited by 28

The fluidization of light solids by gases under pressure and heavy solids by water

Simpson, H. C., & Rodger, B. W. (1961) · Chemical Engineering Science · doi:10.1016/0009-2509(61)80028-6 · Cited by 22

Agglomerated CNTs synthesized in a fluidized bed reactor: Agglomerate structure and formation mechanism

Yu, H., Qunfeng, Z., Fei, W., Weizhong, Q., & Guohua, L. (2003) · Carbon · doi:10.1016/s0008-6223(03)00425-1 · Cited by 149

Large‐scale discrete element modeling in a fluidized bed

Sakai, M., Yamada, Y., Shigeto, Y., Shibata, K., Kawasaki, V. M., & Koshizuka, S. (2010) · International Journal for Numerical Methods in Fluids · doi:10.1002/fld.2364 · Cited by 146

Fluid dynamic stability of fluidised suspensions: the particle bed model

Foscolo, P. U., & Gibilaro, L. G. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)85021-2 · Cited by 146

Eulerian simulation of gas–solid flows with particles of Geldart groups A, B and D using EMMS-based meso-scale model

Lu, B., Wang, W., & Li, J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.06.026 · Cited by 145

Behaviour of gas-fluidized beds of fine powders part II. Voidage of the dense phase in bubbling beds

Abrahamsen, A. R., & Geldart, D. (1980) · Powder Technology · doi:10.1016/0032-5910(80)85006-6 · Cited by 145

The design of distributors for gas-fluidized beds

Geldart, D., & Baeyens, J. (1985) · Powder Technology · doi:10.1016/0032-5910(85)80039-5 · Cited by 145

Use of discrete element method simulation in studying fluidization characteristics: influence of interparticle force

Rhodes, M. J., Wang, X., Nguyen, M. N., et al. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00427-9 · Cited by 144

The effect of particle size distribution on minimum fluidization velocity at high temperature

Lin, C.-L., Wey, M., & You, S.-D. (2002) · Powder Technology · doi:10.1016/s0032-5910(02)00074-8 · Cited by 142

Kinetic and Reaction Engineering Studies of Dry Reforming of Methane over a Ni/La/Al2O3 Catalyst

Olsbye, U., Wurzel, T., & Mleczko, L. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970246l · Cited by 142

Metering and dispensing of powder; the quest for new solid freeforming techniques

Yang, S., & Evans, J. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.04.004 · Cited by 140

FLUID BED ENCAPSULATION OF PARTICLES: PRINCIPLES AND PRACTICE

Guignon, B., Duquenoy, A., & Dumoulin, É. (2002) · Drying Technology · doi:10.1081/drt-120002550 · Cited by 140

The mechanics of gas fluidized beds with an interval of stable fluidization

Tsinontides, S., & Jackson, R. (1993) · Journal of Fluid Mechanics · doi:10.1017/s0022112093002472 · Cited by 140

Multicycle CO2 capture activity and fluidizability of Al-based synthesized CaO sorbents

Azimi, B., Tahmasebpoor, M., Sánchez-Jiménez, P. E., Perejón, A., & Valverde, J. M. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.10.061 · Cited by 139

Formulation Design of Dry Powders for Inhalation

Weers, J. G., & Miller, D. P. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24574 · Cited by 142

Computational study of heat transfer in a bubbling fluidized bed with a horizontal tube

Hou, Q., Zhou, Z., & Yu, A. (2011) · AIChE Journal · doi:10.1002/aic.12700 · Cited by 136

Evaluation of correlations for minimum fluidization velocity (U) in gas-solid fluidization

Anantharaman, A., Cocco, R. A., & Chew, J. W. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.10.016 · Cited by 135

Critical comparison of hydrodynamic models for gas–solid fluidized beds—Part II: freely bubbling gas–solid fluidized beds

Patil, D. J., Annaland, M. V. S., & Kuipers, J. A. M. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2004.07.058 · Cited by 135

Types of choking in vertical pneumatic systems

Bi, H. T., Grace, J. R., & Zhu, J. (1993) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(93)90079-a · Cited by 135

Expansion of a freely bubbling fluidized bed

Johnsson, F., Andersson, S., & Leckner, B. (1991) · Powder Technology · doi:10.1016/0032-5910(91)80118-3 · Cited by 134

CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors: Modelling the impact of biomass shrinkage

Papadikis, K., Gu, S., & Bridgwater, A. V. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.01.036 · Cited by 134

Dry powder platform for pulmonary drug delivery

Daniher, D., & Zhu, J. (2008) · Particuology · doi:10.1016/j.partic.2008.04.004 · Cited by 133

Gas–solid fluidization of cohesive powders

Raganati, F., Chirone, R., & Ammendola, P. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2018.03.034 · Cited by 135

Eulerian simulation of bubble formation at a jet in a two-dimensional fluidized bed

Boemer, A., Qi, H., & Renz, U. (1997) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(97)00018-9 · Cited by 133

Fundamentals of turbulent gas-solid flows applied to circulating fluidized bed combustion

Peirano, E., & Leckner, B. G. (1998) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(98)00002-1 · Cited by 132

The effects of particle and gas properties on the fluidization of Geldart A particles

Ye, M., van der Hoef, M. A., & Kuipers, J. A. M. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2005.03.017 · Cited by 131

Prediction of minimum fluidization velocity for binary mixtures of biomass and inert particles

Paudel, B. D., & Feng, Z.-G. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.01.031 · Cited by 131

A Review of Eulerian Simulation of Geldart A Particles in Gas-Fluidized Beds

Wang, J. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900247t · Cited by 130

Preparation of functional lupine protein fractions by dry separation

Pelgrom, P. J. M., Berghout, J. A. M., van der Goot, A. J., et al. (2014) · LWT · doi:10.1016/j.lwt.2014.06.007 · Cited by 129

Fluidized bed synthesis of carbon nanotubes – A review

Dasgupta, K., Joshi, J. B., & Banerjee, S. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.05.038 · Cited by 128

Nanofuel as a potential secondary energy carrier

Wen, D. (2010) · Energy & Environmental Science · doi:10.1039/b906384f · Cited by 129

Evaluation of hematite oxygen carrier in chemical-looping combustion of coal

Song, T., Shen, T., Shen, L., et al. (2012) · Fuel · doi:10.1016/j.fuel.2012.09.030 · Cited by 128

Multiscale structures in particle–fluid systems: Characterization, modeling, and simulation

Ge, W., Chang, Q.-M., Li, C.-X., & Wang, J. (2019) · Chemical Engineering and Science · doi:10.1016/j.ces.2018.12.037 · Cited by 120

Fluidization of powders showing degrees of cohesiveness—I. Bed expansion

Geldart, D., & Wong, A. C. Y. (1984) · Chemical Engineering Science · doi:10.1016/0009-2509(84)80006-8 · Cited by 126

Influence of particle properties on powder bulk behaviour and processability

Shah, U. V., Karde, V., Ghoroi, C., et al. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.12.045 · Cited by 125

Recent Advances and Perspectives of CFD–DEM Simulation in Fluidized Bed

Zhao, Z., Zhou, L. H., Bai, L., Wang, B., & Agarwal, R. K. (2023) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-023-10001-6 · Cited by 125

A review of carbon nanotube purification by microwave assisted acid digestion

MacKenzie, K. J., Dunens, O. M., & Harris, A. T. (2009) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.01.017 · Cited by 125

Homogeneous fluidization of fine powders using various gases and pressures

Geldart, D., & Abrahamsen, A. R. (1978) · Powder Technology · doi:10.1016/0032-5910(78)80084-9 · Cited by 124

Dense-phase pneumatic conveying: A review

Konrad, K. (1986) · Powder Technology · doi:10.1016/0032-5910(86)85001-x · Cited by 123

Comparison between two-fluid model simulations and particle image analysis & velocimetry (PIV) results for a two-dimensional gas–solid fluidized bed

Hernández-Jiménez, F., Sánchez-Delgado, S., Gómez-García, A., et al. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.04.026 · Cited by 122

Profoundly improving flow properties of a cohesive cellulose powder by surface coating with nano‐silica through comilling

Chattoraj, S., Shi, L., & Sun, C. C. (2011) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.22677 · Cited by 122

Characterization of particle and bulk level cohesion reduction of surface modified fine aluminum powders

Chen, Y., Jallo, L. J., Quintanilla, M. A. S., et al. (2010) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2010.03.015 · Cited by 122

Introduction to Circulating Fluidized Beds

Grace, J. R., & Bi, H. T. (1997) · Springer eBooks · doi:10.1007/978-94-009-0095-0_1 · Cited by 122

Macroscopic modelling of fluid dynamics in large-scale circulating fluidized beds

Pallarès, D., & Johnsson, F. (2006) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.02.002 · Cited by 120

Spray-Freeze-Drying approach for soluble coffee processing and its effect on quality characteristics

Ishwarya, S. P., & Anandharamakrishnan, C. (2014) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2014.10.011 · Cited by 119

The role of interparticle forces in the fluidization of fine particles

Xie, H. (1997) · Powder Technology · doi:10.1016/s0032-5910(97)03270-1 · Cited by 119

Micro fluidized beds: Wall effect and operability

Liu, X., Xu, G., & Gao, S. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.04.035 · Cited by 119

DEM–CFD analysis of fluidization behavior of Geldart Group A particles using a dynamic adhesion force model

Kobayashi, T., Tanaka, T., Shimada, N., & Kawaguchi, T. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.02.028 · Cited by 116

Material properties and flow modes in pneumatic conveying

Pan, R. (1999) · Powder Technology · doi:10.1016/s0032-5910(99)00044-3 · Cited by 118

Experimental segregation profiles in bubbling gas‐fluidized beds

Joseph, G. G., Leboreiro, J., Hrenya, C. M., et al. (2007) · AIChE Journal · doi:10.1002/aic.11282 · Cited by 118

Experimental and theoretical study on the agglomeration arising from fluidization of cohesive particles—effects of mechanical vibration

Xu, C. C., & Zhu, J. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2005.05.062 · Cited by 118

Experimental methods in fluidization research

Yates, J. G., & Simons, S. J. R. (1994) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(94)90076-0 · Cited by 117

Fluidized-bed incineration of waste materials

Saxena, S. C., & Jotshi, C. K. (1994) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(94)90012-4 · Cited by 116

Bed expansion in high velocity fluidization

Avidan, A. A., & Yerushalmi, J. (1982) · Powder Technology · doi:10.1016/0032-5910(82)85024-9 · Cited by 116

Parametric study of fine particle fluidization under mechanical vibration

Xu, C. C., & Zhu, J. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.10.002 · Cited by 116

High-resolution 3-D full-loop simulation of a CFB carbonator cold model

Nikolopoulos, A., Nikolopoulos, N., Charitos, A., et al. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.12.007 · Cited by 115

The effect of vibration on the fluidization behaviour of some cohesive powders

Marring, E., Hoffmann, A. C., & Janssen, L. P. B. M. (1994) · Powder Technology · doi:10.1016/0032-5910(94)02810-9 · Cited by 115

Pressure drop in conical spouted beds

Olazar, M., José, M. J. S., Aguayo, A. T., et al. (1993) · The Chemical Engineering Journal · doi:10.1016/0300-9467(93)80008-c · Cited by 114

CFD Simulations of bubbling/collapsing fluidized beds for three Geldart Groups

Gelderbloom, S. J., Gidaspow, D., & Lyczkowski, R. W. (2003) · AIChE Journal · doi:10.1002/aic.690490405 · Cited by 113

Micromechanical modeling and analysis of different flow regimes in gas fluidization

Hou, Q., Zhou, Z., & Yu, A. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.08.051 · Cited by 112

CFD study of the minimum bubbling velocity of Geldart A particles in gas-fluidized beds

Wang, J., van der Hoef, M. A., & Kuipers, J. A. M. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.03.023 · Cited by 113

The tensile strength of cohesive powders and its relationship to consolidation, free volume and cohesivity

Valverde, J. M., Ramos, A., Castellanos, A., et al. (1998) · Powder Technology · doi:10.1016/s0032-5910(98)00025-4 · Cited by 111

Self-Organization and Chaos in a Fluidized Bed

Daw, C. S., Finney, C. E. A., Vasudevan, M., et al. (1995) · Physical Review Letters · doi:10.1103/physrevlett.75.2308 · Cited by 110

Size, shape and flow characterization of ground wood chip and ground wood pellet particles

Rezaei, H., Lim, C. J., Lau, A., & Sokhansanj, S. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.07.016 · Cited by 112

Aerodynamic dispersion of cohesive powders: A review of understanding and technology

Calvert, G., Ghadiri, M., & Tweedie, R. J. (2009) · Advanced Powder Technology · doi:10.1016/j.apt.2008.09.001 · Cited by 109

Fine coal dry cleaning using a vibrated gas-fluidized bed

Yang, X., Zhao, Y., Luo, Z., et al. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.08.019 · Cited by 108

Cluster characteristics of Geldart group B particles in a pilot-scale CFB riser. II. Polydisperse systems

Chew, J. W., Hays, R., Findlay, J. G., et al. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.09.011 · Cited by 108

Comparison of different drag models in CFD-DEM simulations of spouted beds

Marchelli, F., Hou, Q., Bosio, B., Arato, E., & Yu, A. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.10.058 · Cited by 108

Prediction of minimum fluidization velocity of gas–solid fluidized beds by pressure fluctuation measurements — Analysis of the standard deviation methodology

Felipe, C. A. S., & Rocha, S. C. S. (2007) · Powder Technology · doi:10.1016/j.powtec.2007.01.015 · Cited by 107

Vertically aligned carbon nanotube arrays grown on a lamellar catalyst by fluidized bed catalytic chemical vapor deposition

Zhang, Q., Zhao, M., Huang, J., et al. (2009) · Carbon · doi:10.1016/j.carbon.2009.05.012 · Cited by 107

Hydrodeoxygenation of Guaiacol, A Surrogate of Lignin Pyrolysis Vapors, Over Iron Based Catalysts: Kinetics and Modeling of the Lignin to Aromatics Integrated Process

Olcese, R. N., François, J., Bettahar, M. M., Petitjean, D., & Dufour, A. (2013) · Energy & Fuels · doi:10.1021/ef301971a · Cited by 108

Bubble-free fluidization of a cohesive powder in an acoustic field

Chirone, R., Massimilla, L., & Russo, S. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)80281-t · Cited by 107

Vibro-fluidization of fine boron nitride powder at low pressure

Wank, J. R., George, S. M., & Weimer, A. W. (2001) · Powder Technology · doi:10.1016/s0032-5910(01)00337-0 · Cited by 106

Qualitative Description of the Wurster-Based Fluid-Bed Coating Process

Christensen, F. N., & Bertelsen, P. (1997) · Drug Development and Industrial Pharmacy · doi:10.3109/03639049709148494 · Cited by 106

Reactor concepts for atomic layer deposition on agitated particles: A review

Longrie, D., Deduytsche, D., & Detavernier, C. (2013) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.4851676 · Cited by 108

Prediction of fluidized bed behaviour in the presence of liquid bridges

McLaughlin, L. J., & Rhodes, M. J. (2001) · Powder Technology · doi:10.1016/s0032-5910(00)00325-9 · Cited by 105

Powder formation by atmospheric spray-freeze-drying

Wang, Z. L., Finlay, W. H., Peppler, M. S., et al. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.08.019 · Cited by 105

A comparative study on the influence of the gas flow rate on the hydrodynamics of a gas–solid spouted fluidized bed using Euler–Euler and Euler–Lagrange/DEM models

Almohammed, N., Alobaid, F., Breuer, M., et al. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.05.024 · Cited by 104

A modified cohesion model for CFD–DEM simulations of fluidization

Gu, Y., Özel, A., & Sundaresan, S. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.09.037 · Cited by 104

The Impact of Inspiratory Flow Rate on Drug Delivery to the Lungs with Dry Powder Inhalers

Weers, J. G., & Clark, A. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-2050-x · Cited by 104

Effects of temperature, pressure, and interparticle forces on the hydrodynamics of a gas-solid fluidized bed

Shabanian, J., & Chaouki, J. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.12.061 · Cited by 104

Crystal and Particle Engineering Strategies for Improving Powder Compression and Flow Properties to Enable Continuous Tablet Manufacturing by Direct Compression

Chattoraj, S., & Sun, C. C. (2017) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.11.023 · Cited by 104

An advanced EMMS scheme for the prediction of drag coefficient under a 1.2 MWth CFBC isothermal flow—Part II: Numerical implementation

Nikolopoulos, A., Atsonios, K., Nikolopoulos, N., et al. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.03.053 · Cited by 104

Bed height and material density effects on fluidized bed hydrodynamics

Escudero, D. R., & Heindel, T. J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.04.036 · Cited by 109

Experimental and computational study of multiphase gas/particle flow in a CFB riser

Mathiesen, V., Solberg, T., Arastoopour, H., et al. (1999) · AIChE Journal · doi:10.1002/aic.690451206 · Cited by 103

Gas–solid fluidization in a centrifugal field

Qian, G., Bágyi, I., Burdick, I. W., et al. (2001) · AIChE Journal · doi:10.1002/aic.690470509 · Cited by 103

Fine particle coating by a novel rotating fluidized bed coater

Watano, S., Nakamura, H., Hamada, K., et al. (2004) · Powder Technology · doi:10.1016/j.powtec.2003.03.001 · Cited by 102

Particle circulation loops in solar energy capture and storage: Gas–solid flow and heat transfer considerations

Zhang, H., Benoit, H., Daniel, G., et al. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.005 · Cited by 101

High-efficiency solar power towers using particle suspensions as heat carrier in the receiver and in the thermal energy storage

Zhang, H., Benoit, H., Perez-Lopèz, I., Flamant, G., Tan, T., & Baeyens, J. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.03.101 · Cited by 101

Comparison of multifluid and discrete particle modelling in numerical predictions of gas particle flow in circulating fluidised beds

Ibsen, C. H., Helland, E., Hjertager, B. H., et al. (2004) · Powder Technology · doi:10.1016/j.powtec.2004.09.042 · Cited by 101

Fluidization of FCC powders in the bubble-free regime: effect of types of gases and temperature

Xie, H., & Geldart, D. (1995) · Powder Technology · doi:10.1016/0032-5910(94)02932-e · Cited by 101

Application of electrical capacitance tomography in circulating fluidised beds – A review

Wang, H., & Yang, W. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115311 · Cited by 100

Cluster characteristics of Geldart Group B particles in a pilot-scale CFB riser. I. Monodisperse systems

Chew, J. W., Hays, R., Findlay, J. G., et al. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.09.012 · Cited by 100

Fluidization of powders showing degrees of cohesiveness—II. Experiments on rates of de-aeration

Geldart, D., & Wong, A. C. Y. (1985) · Chemical Engineering Science · doi:10.1016/0009-2509(85)80011-7 · Cited by 100

Thermal energy storage in a fluidized bed of PCM

Izquierdo-Barrientos, M. A., Sobrino, C., & Almendros-Ibáñez, J. A. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.112 · Cited by 99

Influence of pressure and fluidization velocity on the bubble behaviour and gas flow distribution in a fluidized bed

Olowson, P. A., & Almstedt, A.-E. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)87051-s · Cited by 99

Understanding the influence of powder flowability, fluidization and de-agglomeration characteristics on the aerosolization of pharmaceutical model powders

Zhou, Q. T., Armstrong, B., Larson, I. C., et al. (2010) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2010.04.012 · Cited by 99

Investigation of batch fluidized‐bed drying by mathematical modeling, CFD simulation and ECT measurement

Wang, H., Yang, W., Senior, P., et al. (2007) · AIChE Journal · doi:10.1002/aic.11406 · Cited by 99

Short-time plasma surface modification of HDPE powder in a Plasma Downer Reactor – process, wettability improvement and ageing effects

Arpagaus, C., Rossi, A. M., & von Rohr, P. R. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.02.099 · Cited by 99

Transport Phenomena and Reaction in Fluidized Catalyst Beds

Miyauchi, T., Furusaki, S., Morooka, S., & Ikeda, Y. (1981) · Advances in chemical engineering · doi:10.1016/s0065-2377(08)60028-9 · Cited by 99

Aerosolization characteristics of dry powder inhaler formulations for the excipient enhanced growth (EEG) application: Effect of spray drying process conditions on aerosol performance

Son, Y., Longest, P. W., & Hindle, M. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.01.003 · Cited by 98

HYDRODYNAMICS OF FLUIDIZATION: EXPERIMENTAL AND THEORETICAL BUBBLE SIZES IN A TWO-DIMENSIONAL BED WITH A JET

Gidaspow, D., Seo, Y., & ETTEHADIEH, B. (1983) · Chemical Engineering Communications · doi:10.1080/00986448308940060 · Cited by 50

Hydrodynamics of fluidization: Fast-bubble simulation in a two-dimensional fluidized bed

Bouillard, J. X., Gidaspow, D., & Lyczkowski, R. W. (1991) · Powder Technology · doi:10.1016/0032-5910(91)80092-w · Cited by 27

Analysis of solid particle mixing in inclined fluidized beds using DEM simulation

Chaikittisilp, W., Taenumtrakul, T., Boonsuwan, P., et al. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.05.006 · Cited by 54

Drift flux in gas—liquid—solid fluidized systems from the dynamics of bed collapse

Chen, Y., & Fan, L. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)85016-7 · Cited by 18

Extension of a model for the distribution of voidage around bubbles in a fluidized bed

Rautenbach, C., Jayarathna, C. K., Melaaen, M. C., et al. (2011) · WIT transactions on engineering sciences · doi:10.2495/mpf110161