The DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Cold spray additive manufacturing and repair: Fundamentals and applications
Open accessAbstract
Abstract Cold spray is a solid-state coating deposition technology which has recently been applied as an additive manufacturing process to fabricate individual components and to repair damaged components. In comparison with fusion-based high-temperature additive manufacturing processes, cold spray additive manufacturing (CSAM) has been shown to retain the original properties of the feedstock, to produce oxide-free deposits, and to not adversely influence underlying substrate materials during manufacture. Therefore, CSAM is attracting considerable attention from both scientific and industrial communities. Although CSAM is an emerging additive manufacturing technology, a body of work has been carried out by various research groups and the technology has been applied across a range of manufacturing areas. The purpose of this paper is to systematically summarize and review the CSAM-related work to date.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Bonding mechanism in cold gas spraying
Assadi, H., Gärtner, F., Stoltenhoff, T., & Kreye, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00274-x · Cited by 1,811
Development of a generalized parameter window for cold spray deposition
Schmidt, T., Gärtner, F., Assadi, H., & Kreye, H. (2006) · Acta Materialia · doi:10.1016/j.actamat.2005.10.005 · Cited by 1,183
Cold spraying – A materials perspective
Assadi, H., Kreye, H., Gärtner, F., & Klassen, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.034 · Cited by 946
Grujicic, M., Zhao, C. L., DeRosset, W. S., & Helfritch, D. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.03.008 · Cited by 799
Particle Velocity and Deposition Efficiency in the Cold Spray Process
Gilmore, D. L., Dykhuizen, R. C., Neiser, R. A., Roemer, T. J., & Smith, M. F. (1999) · Journal of Thermal Spray Technology · doi:10.1361/105996399770350278 · Cited by 464
Solid-state additive manufacturing and repairing by cold spraying: A review
Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., & Lupoi, R. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.09.015 · Cited by 414
Self-citationOn Parameter Selection in Cold Spraying
Assadi, H., Schmidt, T., Richter, H., Kliemann, J.-O., Binder, K., Gärtner, F., Klassen, T., & Kreye, H. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-011-9662-9 · Cited by 413
Bonding features and associated mechanisms in kinetic sprayed titanium coatings
Bae, G., Kumar, S., Yoon, S., Kang, K., Na, H., Kim, H., & Lee, C. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.07.061 · Cited by 325
Cited by
Solid-state cold spraying of Ti and its alloys: A literature review
Li, W., Cao, C., & Yin, S. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100633 · Cited by 257
Self-citationGriffiths, R. J., Garcia, D., Song, J., Vasudevan, V. K., Steiner, M. A., Cai, W., & Yu, H. Z. (2021) · Materialia · doi:10.1016/j.mtla.2020.100967 · Cited by 228
Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review
Ge, J., Pillay, S., & Ning, H. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-08051-9 · Cited by 157
A Review on the Processing of Aero-Turbine Blade Using 3D Print Techniques
Sinha, A., Swain, B., Behera, A., Mallick, P., Samal, S. K., Vishwanatha, H. M., & Behera, A. (2022) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010016 · Cited by 98
Yang, X., Meng, T., Su, Y., Chai, X., Guo, Z., Yin, S., Ma, T., & Li, W. (2024) · Materials Science and Engineering: A · doi:10.1016/j.msea.2023.146024 · Cited by 40
Self-citation
Metadata
- Authors
- Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., & Lupoi, R.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2018-05
- Volume
- 21
- Pages
- 628-650
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2801918432
- Cited by
- 599
- References
- 91
- FWCI
- 41.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cold spray additive manufacturing and repair: Fundamentals and applications. https://app.cochat.ai/papers/10.1016/j.addma.2018.04.017
- The paper
- Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., & Lupoi, R. (2018). Cold spray additive manufacturing and repair: Fundamentals and applications. Additive Manufacturing. https://doi.org/10.1016/j.addma.2018.04.017
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
