The DOI matches its Crossref record; 116 of the 116 references it cites were found in a registry or an index.
PLA based biocomposites for sustainable products: A review
Open accessAbstract
In recent decades, demand for sustainable materials in place of low cost and high strength materials has been trigged globally, which has motivated researchers towards biocomposites/green composites. The PLA has been the most promising matrix material for suistanable biocomposites owing to its biodegradability, good availability, eco-friendliness, antibacterial property, and good mechanical and thermal properties. The PLA-based biocomposites are economical, full/partial biodegradable depends upon types of reinforcement, light in weight, and also offer good thermal and mechanical properties. A number of research works have been performed on PLA and its biocomposites to explore their potential for sustainable products. However, no comprehensive review with up-to-date research data on PLA and its biocomposites are reported so far. This fact motivated to summerize the reported studies on PLA and its biocomposites. The aim of present review is to highlight the current and past trends in the research of PLA and its biocomposites. This review article covers current and past efforts reported by researchers on the synthesis and sustainability of PLA, processing, characterization, applications and future scope of its biocomposites. This study observed that PLA-based composites are the most emerging materials that can replace existing non-biodegradable and non-renewable synthetic materials. The PLA-based biocomposites could be considered as the best source of sustainable products. PLA's mechanical and thermal properties can be enhanced by reinforcing the nano and micro sizes of natural fibers and cellulose.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Crystallization behavior of poly(ε‐caprolactone)/layered double hydroxide nanocomposites
Yang, Z., Peng, H., Wang, W., & Liu, T. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31787 · Cited by 1,200
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Jonoobi, M., Harun, J., Mathew, A. P., & Oksman, K. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.07.005 · Cited by 863
Polylactic Acid for Surgical Implants
KULKARNI, R. K. (1966) · Archives of Surgery · doi:10.1001/archsurg.1966.01330050143023 · Cited by 841
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Production and application of microbial cellulose
Jonas, R., & Farah, L. F. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00197-3 · Cited by 725
Recent developments on nanocellulose reinforced polymer nanocomposites: A review
Kargarzadeh, H., Mariano, M., Huang, J., Lin, N., Ahmad, I., Dufresne, A., & Thomas, S. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.043 · Cited by 673
Rajeshkumar, G., Arvindh Seshadri, S., Devnani, G. L., Sanjay, M. R., Siengchin, S., Prakash Maran, J., Al-Dhabi, N. A., Karuppiah, P., Mariadhas, V. A., Sivarajasekar, N., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127483 · Cited by 640
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637
The development and challenges of poly (lactic acid) and poly (glycolic acid)
Jem, K. J., & Tan, B. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.002 · Cited by 615
Applications of Natural Fibers and Its Composites: An Overview
Sanjay, M. R., Arpitha, G. R., Naik, L. L., Gopalakrishna, K., & Yogesha, B. (2016) · Natural Resources · doi:10.4236/nr.2016.73011 · Cited by 550
Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites
Yu, T., Ren, J., Li, S., Yuan, H., & Li, Y. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.12.006 · Cited by 485
Exopolysaccharides of lactic acid bacteria: Structure, bioactivity and associations: A review
Zhou, Y., Cui, Y., & Qu, X. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.093 · Cited by 412
Goriparthi, B. K., Suman, K. N. S., & Rao, N. M. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.05.007 · Cited by 400
Bio-sourced polymers as alternatives to conventional food packaging materials: A review
Sid, S., Mor, R. S., Kishore, A., & Sharanagat, V. S. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.06.026 · Cited by 387
Characterization of natural fiber and composites – A review
Sathishkumar, T., Navaneethakrishnan, P., Shankar, S., Rajasekar, R., & Rajini, N. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413495322 · Cited by 372
Carothers, W. H., Dorough, G. L., & Natta, F. J. V. (1932) · Journal of the American Chemical Society · doi:10.1021/ja01341a046 · Cited by 367
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Tao, Y., Wang, H., Li, Z., Li, P., & Shi, S. Q. (2017) · Materials · doi:10.3390/ma10040339 · Cited by 360
Effects of part build orientations on fatigue behaviour of FDM-processed PLA material
Afrose, M. F., Masood, S. H., Iovenitti, P., Nikzad, M., & Sbarski, I. (2016) · Progress in Additive Manufacturing · doi:10.1007/s40964-015-0002-3 · Cited by 358
Dong, Y., Ghataura, A., Takagi, H., Haroosh, H. J., Nakagaito, A. N., & Lau, K.-T. (2014) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.04.003 · Cited by 357
Handbook of Nanocellulose and Cellulose Nanocomposites
(2017) · Wiley eBooks · doi:10.1002/9783527689972 · Cited by 343
Hu, R., & Lim, J.-K. (2007) · Journal of Composite Materials · doi:10.1177/0021998306069878 · Cited by 334
Yussuf, A. A., Massoumi, I., & Hassan, A. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0185-0 · Cited by 327
Surface modifications of nanocellulose: From synthesis to high-performance nanocomposites
Ghasemlou, M., Daver, F., Ivanova, E. P., Habibi, Y., & Adhikari, B. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101418 · Cited by 327
Ranakoti, L., Gangil, B., Mishra, S. K., Singh, T., Sharma, S., Ilyas, R. A., & El-Khatib, S. (2022) · Materials · doi:10.3390/ma15124312 · Cited by 311
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
A review of 3D and 4D printing of natural fibre biocomposites
Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108911 · Cited by 280
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.004 · Cited by 261
Applications of biocomposite materials based on natural fibers from renewable resources: a review
Bharath, K. N., & Basavarajappa, S. (2015) · Science and Engineering of Composite Materials · doi:10.1515/secm-2014-0088 · Cited by 254
Herrera, N., Mathew, A. P., & Oksman, K. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.11.012 · Cited by 246
Orue, A., Jauregi, A., Unsuain, U., Labidi, J., Eceiza, A., & Arbelaiz, A. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.01.021 · Cited by 245
Mahardika, M., Abral, H., Kasim, A., Arief, S., & Asrofi, M. (2018) · Fibers · doi:10.3390/fib6020028 · Cited by 234
Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing
Murphy, C. A., & Collins, M. N. (2018) · Polymer Composites · doi:10.1002/pc.24069 · Cited by 233
Ferreira, F., Pinheiro, I., de Souza, S., Mei, L., & Lona, L. (2019) · Journal of Composites Science · doi:10.3390/jcs3020051 · Cited by 231
Sung, S. H., Chang, Y., & Han, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.037 · Cited by 227
Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride
Yu, T., Jiang, N., & Li, Y. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.05.008 · Cited by 226
Kenaf‐fiber‐reinforced poly(lactic acid) used for electronic products
Serizawa, S., Inoue, K., & Iji, M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23377 · Cited by 221
Sanivada, U. K., Mármol, G., Brito, F. P., & Fangueiro, R. (2020) · Polymers · doi:10.3390/polym12102373 · Cited by 221
Composites of poly(L‐lactide) with hemp fibers: Morphology and thermal and mechanical properties
Masirek, R., Kulinski, Z., Chionna, D., Piorkowska, E., & Pracella, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26090 · Cited by 218
Vink, E. T. H., Glassner, D. A., Kolstad, J. J., Wooley, R. J., & O’Connor, R. P. (2007) · Industrial Biotechnology · doi:10.1089/ind.2007.3.058 · Cited by 215
PLA/banana fiber based sustainable biocomposites: A manufacturing perspective
Komal, U. K., Lila, M. K., & Singh, I. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107535 · Cited by 209
Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review
Nurul Fazita, M. R., Jayaraman, K., Bhattacharyya, D., Mohamad Haafiz, M. K., Saurabh, C., Hussin, M., & H.P.S., A. (2016) · Materials · doi:10.3390/ma9060435 · Cited by 206
Raddadi, N., & Fava, F. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.04.419 · Cited by 205
De Rosa, I. M., Santulli, C., & Sarasini, F. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.059 · Cited by 202
Preparation and properties of short natural fiber reinforced poly(lactic acid) composites
YU, T., LI, Y., & REN, J. (2009) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(10)60126-4 · Cited by 194
Towards sustainability of lactic acid and poly-lactic acid polymers production
Djukić-Vuković, A., Mladenović, D., Ivanović, J., Pejin, J., & Mojović, L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.050 · Cited by 193
Bajpai, P. K., Singh, I., & Madaan, J. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684412447992 · Cited by 176
Leist, S. K., Gao, D., Chiou, R., & Zhou, J. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1341815 · Cited by 173
Lertwimolnun, W., & Vergnes, B. (2006) · Polymer Engineering and Science · doi:10.1002/pen.20458 · Cited by 153
Thermally recyclable polylactic acid/cellulose nanocrystal films through reactive extrusion process
Dhar, P., Tarafder, D., Kumar, A., & Katiyar, V. (2016) · Polymer · doi:10.1016/j.polymer.2016.02.004 · Cited by 151
Physical and mechanical properties of PLA composites reinforced by TiO 2 grafted flax fibers
Foruzanmehr, M. R., Vuillaume, P. Y., Elkoun, S., & Robert, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.103 · Cited by 150
Thermal and mechanical properties of PLA-based multiscale cellulosic biocomposites
Ruz-Cruz, M. A., Herrera-Franco, P. J., Flores‐Johnson, E. A., Moreno‐Chulim, M. V., Galera-Manzano, L. M., & Valadez-González, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.02.072 · Cited by 145
Wet Granulation in a Twin‐Screw Extruder: Implications of Screw Design
Thompson, M. R., & Sun, J. (2009) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21973 · Cited by 143
Sisal (Agave sisalana) fibre and its polymer-based composites: A review on current developments
Sahu, P., & Gupta, M. (2017) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684417725584 · Cited by 142
Self-citationToughening of Polylactic Acid Nanocomposites: A Short Review
Balakrishnan, H., Hassan, A., Imran, M., & Wahit, M. U. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2011.618329 · Cited by 135
Gond, R. K., Gupta, M. K., & Jawaid, M. (2021) · Polymer Composites · doi:10.1002/pc.26232 · Cited by 131
Self-citationAlam, A. K. M. M., Beg, M. D. H., Prasad, D. M. R., Khan, M. M. R., & Mina, M. F. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.06.012 · Cited by 130
Development of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA)
Ghasemi, S., Behrooz, R., Ghasemi, I., Yassar, R. S., & Long, F. (2017) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705717734600 · Cited by 128
Lin, J., Yang, Z., Hu, X., Hong, G., Zhang, S., & Song, W. (2018) · Polymers · doi:10.3390/polym10040403 · Cited by 123
Ngaowthong, C., Borůvka, M., Běhálek, L., Lenfeld, P., Švec, M., Dangtungee, R., Siengchin, S., Rangappa, S. M., & Parameswaranpillai, J. (2019) · Waste Management · doi:10.1016/j.wasman.2019.07.038 · Cited by 123
Wang, Z., Xu, J., Lu, Y., Hu, L., Fan, Y., Ma, J., & Zhou, X. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.09.061 · Cited by 112
Yang, C., Wang, B., Li, D., & Tian, X. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1265992 · Cited by 111
Sisal Fiber Based Polymer Composites and Their Applications
Saxena, M., Pappu, A., Haque, R., & Sharma, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_22 · Cited by 106
The overview on the use of natural fibers reinforced composites for food packaging
Sydow, Z., & Bieńczak, K. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1455621 · Cited by 102
Chen, G. (2009) · Microbiology monographs · doi:10.1007/978-3-642-03287-5_6 · Cited by 99
Sustainable Biocomposites: Challenges, Potential and Barriers for Development
AL-Oqla, F. M., & Omari, M. A. (2016) · Green energy and technology · doi:10.1007/978-3-319-46610-1_2 · Cited by 96
Poly(lactic acid) and Osage Orange wood fiber composites for agricultural mulch films
Finkenstadt, V. L., & Tisserat, B. H. (2009) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.11.012 · Cited by 94
Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites
Singh, J. I. P., Singh, S., & Dhawan, V. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1354744 · Cited by 88
Mechanical and Thermal Properties of PLA Biocomposites Reinforced by Coir Fibers
Sun, Z., Zhang, L., Liang, D., Xiao, W., & Lin, J. (2017) · International Journal of Polymer Science · doi:10.1155/2017/2178329 · Cited by 86
Ring-Opening Polymerization of Lactide To Form a Biodegradable Polymer
Robert, J. L., & Aubrecht, K. B. (2008) · Journal of Chemical Education · doi:10.1021/ed085p258 · Cited by 84
Yiga, V. A., Lubwama, M., Pagel, S., Benz, J., Olupot, P. W., & Bonten, C. (2020) · Polymer Composites · doi:10.1002/pc.25835 · Cited by 81
Hong, S.-H., Park, J. H., Kim, O. Y., & Hwang, S. (2021) · Polymers · doi:10.3390/polym13040667 · Cited by 81
Laali, K. K., Greves, W. J., Correa-Smits, S. J., Zwarycz, A. T., Bunge, S. D., Borosky, G. L., Manna, A., Paulus, A., & Chanan-Khan, A. A. (2017) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2017.11.013 · Cited by 80
Li, L., Chen, Y., Yu, T., Wang, N., Wang, C., & Wang, H. (2019) · Composites Communications · doi:10.1016/j.coco.2019.10.004 · Cited by 79
Natural wastes as particle filler for poly(lactic acid)-based composites
Battegazzore, D., Noori, A. F., & Frache, A. (2018) · Journal of Composite Materials · doi:10.1177/0021998318791316 · Cited by 78
Melt‐spun polylactic acid fibers: Effect of cellulose nanowhiskers on processing and properties
John, M. J., Anandjiwala, R. D., Oksman, K., & Mathew, A. P. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37884 · Cited by 76
Foam injection molding of poly(lactic acid) with environmentally friendly physical blowing agents
Pantani, R., Volpe, V., & Titomanlio, G. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.07.002 · Cited by 75
Chemically extracted nanocellulose from sisal fibres by a simple and industrially relevant process
Trifol, J., Sillard, C., Plackett, D., Szabó, P., Bras, J., & Daugaard, A. E. (2016) · Cellulose · doi:10.1007/s10570-016-1097-5 · Cited by 75
Zaaba, N. F., Mariatti, M., & Ismail, H. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25560 · Cited by 72
Biocomposite from polylactic acid and lignocellulosic fibers: Structure–property correlations
Faludi, G., Dora, G., Renner, K. E., Móczó, J., & Pukánszky, B. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.006 · Cited by 69
Poly(lactic acid) green composites using oilseed coproducts as fillers
Finkenstadt, V. L., Liu, C., Evangelista, R. L., Liu, L., Cermak, S. C., Hojilla‐Evangelista, M. P., & Willett, J. L. (2007) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.01.003 · Cited by 65
Pérez‐Fonseca, A. A., Robledo‐Ortíz, J. R., González‐Núñez, R., & Rodrigue, D. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43750 · Cited by 65
Monika, Dhar, P., & Katiyar, V. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.06.039 · Cited by 65
Okra (Abelmoschus esculentus) Fibre Based PLA Composites: Mechanical Behaviour and Biodegradation
Fortunati, E., Puglia, D., Monti, M., Santulli, C., Maniruzzaman, M., Foresti, M. L., Vázquez, A., & Kenny, J. M. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0571-5 · Cited by 64
Singh, J. I. P., Singh, S., & Dhawan, V. (2019) · Polymers and Polymer Composites · doi:10.1177/0967391119872875 · Cited by 59
Preethikaharshini, J., Naresh, K., Rajeshkumar, G., Arumugaprabu, V., Khan, M., & Khan, K. A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07558-1 · Cited by 59
Akonda, M., Alimuzzaman, S., Shah, D. U., & Rahman, A. N. M. M. (2018) · Fibers · doi:10.3390/fib6040098 · Cited by 51
Kumar, M. N., Gialleli, A.-I., Masson, J. B., Kandylis, P., Bekatorou, A., Κουτίνας, Α. Α., & Kanellaki, M. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.02.110 · Cited by 50
Poly(lactic acids): A Brief Review
Dorgan, J. R., Braun, B., Wegner, J. R., & Knauss, D. M. (2006) · ACS symposium series · doi:10.1021/bk-2006-0939.ch007 · Cited by 42
Altun, Y., Doğan, M., & Bayramlı, E. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0563-x · Cited by 41
Xu, C., Zhang, X., Jin, X., et al. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01428-9 · Cited by 39
Natural fibre-reinforced noncementitious composites (biocomposites)
Christian, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102704-2.00008-1 · Cited by 37
Design and fabrication methods for biocomposites
Cardon, L., Ragaert, K., Santis, R. D., & Gloria, A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100752-5.00002-0 · Cited by 33
Low‐Density Polyethylene/Poly(Lactic Acid) Blends Reinforced by Waste Wood Flour
Boubekeur, B., Belhaneche‐Bensemra, N., & Massardier, V. (2020) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21759 · Cited by 33
Billah, M. M., Rabbi, M. S., & Hasan, A. (2021) · Journal of Engineering Advancements · doi:10.38032/jea.2021.01.003 · Cited by 31
Panicker, A. M., Rajesh, K. A., & Varghese, T. O. (2017) · Iranian Polymer Journal · doi:10.1007/s13726-017-0504-6 · Cited by 29
Hammiche, D., Boukerrou, A., Bettache, A., Guermazi, N., & Budtova, T. (2019) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2019.1567083 · Cited by 28
Mona, C. C., Mohammadi‐Rovshandeh, J., & Hemmati, F. (2019) · Iranian Polymer Journal · doi:10.1007/s13726-019-00743-1 · Cited by 28
Manral, A., & Bajpai, P. K. (2021) · Journal of Natural Fibers · doi:10.1080/15440478.2021.1889435 · Cited by 22
Alturkestany, M. T., Panchal, V., & Thompson, M. R. (2018) · Polymer Engineering and Science · doi:10.1002/pen.24955 · Cited by 16
Ray, D., & Sain, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100793-8.00001-6 · Cited by 15
Gond, R. K., & Gupta, M. K. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2133057 · Cited by 10
Self-citation
Cited by
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Trivedi, A. K., & Gupta, M. K. (2024) · Scientific Reports · doi:10.1038/s41598-024-71619-5 · Cited by 49
Self-citation
Metadata
- Authors
- Trivedi, A. K., Gupta, M. K., & Singh, H.
- Venue
- Advanced Industrial and Engineering Polymer Research
- Publisher
- Elsevier BV
- Published
- 2023-10
- Volume
- 6
- Issue
- 4
- Pages
- 382-395
- ISSN
- 2542-5048 (ISSN-L)
- OpenAlex
- W4323044094
- Cited by
- 337
- References
- 116
- FWCI
- 25.09
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.