CoChat

Continuous hydrothermal liquefaction of macroalgae in the presence of organic co-solvents

Open access
He, Yaya, Liang, Xiao, Jazrawi, Christopher, Montoya, Alejandro, Yuen, Alexander, Cole, Andrew J., Neveux, Nicolas, Paul, Nicholas A., de Nys, Rocky, Maschmeyer, Thomas, Haynes, Brian S. · 2016 · Algal Research
Cited by 77

The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.

Abstract

This paper examines the use of organic co-solvent (n-heptane, toluene and anisole, up to 10 wt.%) in the hydrothermal liquefaction of macroalgal biomass as a means of achieving in situ fractionation of the biocrude product according to polarity. The filamentous freshwater macroalga Oedogonium was grown under nutrient-depleted conditions to achieve a low nitrogen content, 1.1 wt.% N. Its hydrothermal liquefaction in a continuous pilot plant reactor (300-350 degrees C, 3-5min and 2-5 wt.% loadings) yielded up to 25 wt.% (dry ash-free basis, daf) extractable biocrude. More severe conditions led to biocrudes in higher yields, with reduced oxygen and slightly increased nitrogen contents, and with lower viscosity. The presence of co-solvents had little effect on the total biocrude yield but gave rise to in situ separation of the biocrude into distinct fractions associated with the organic phase (designated solvent oil) and the aqueous phase (designated DCM oil). The amount of solvent oil produced exceeded the amount that could be extracted at room temperature, by that solvent, from the product mixture obtained in the absence of co-solvent. The relative proportions and properties of the solvent and DCM fractions varied with the polarity of the co-solvent. Anisole co-solvent dissolved nearly all the biocrude and the resulting viscous oil was similar to that obtained without co-solvent. On the other hand, solvent oil produced with n-heptane (similar to 7.4wt.% daf yield, or similar to 37% of the total biocrude) had significantly reduced levels of nitrogen (1.1wt.%) and oxygen (12.5 wt.%) and possessed relatively low viscosity. Toluene co-solvent HTL produced a solvent oil with intermediate yield and properties. Co-solvent HTL offers a simple and effective means of fractionating HTL biocrude on the basis of polarity. A non-polar co-solvent such as n-heptane produces an enhanced product fraction more suitable for hydrotreating than the mixed product obtained without co-solvent.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.algal.2016.05.010

Cites

14 of 14 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 77

Metadata

Authors
He, Y., Liang, X., Jazrawi, C., Montoya, A., Yuen, A., Cole, A. J., Neveux, N., Paul, N. A., de Nys, R., Maschmeyer, T., & Haynes, B. S.
Venue
Algal Research
Publisher
Elsevier BV
Published
2016-07
Volume
17
Pages
185-195
ISSN
2211-9264 (ISSN-L)
OpenAlex
W2395828393
Cited by
77
References
14
FWCI
3.50
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.