The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling
Open accessAbstract
Fused deposition modeling (FDM) is limited by the availability of application specific functional materials. Here we illustrate printing of non-conventional polymer nanocomposites (CNT- and graphene-based polybutylene terephthalate (PBT)) on a commercially available desktop 3D printer leading toward printing of electrically conductive structures. The printability, electrical conductivity and mechanical stability of the polymer nanocomposites before and after 3D printing was evaluated. The results show that 3D printed PBT/CNT objects have better conductive and mechanical properties and a better performance than 3D printed PBT/graphene structures. In addition to that, printing more than one material (multi-materials) and challenges in using abrasive conductive fillers (i.e., CNT and graphene) are also discussed. Overall this study demonstrates that a commercially available desktop 3D printer can be used to fabricate low-cost functional objects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Reliability and current carrying capacity of carbon nanotubes
Wei, B. Q., Vajtai, R., & Ajayan, P. M. (2001) · Applied Physics Letters · doi:10.1063/1.1396632 · Cited by 1,279
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
Percolation and conductivity: A computer study. I
Pike, G. E., & Seager, C. H. (1974) · Physical Review B · doi:10.1103/physrevb.10.1421 · Cited by 1,031
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Leigh, S. J., Bradley, R. J., Purssell, C. P., Billson, D. R., & Hutchins, D. A. (2012) · PLoS ONE · doi:10.1371/journal.pone.0049365 · Cited by 787
Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process
Bellehumeur, C., Li, L., Sun, Q., & Gu, P. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70071-7 · Cited by 768
Thermal Conductivity of Pure and Impure Silicon, Silicon Carbide, and Diamond
Slack, G. A. (1964) · Journal of Applied Physics · doi:10.1063/1.1713251 · Cited by 695
Electrical Properties and Applications of Carbon Nanotube Structures
Bandaru, P. R. (2007) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2007.307 · Cited by 598
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
Postiglione, G., Natale, G., Griffini, G., Levi, M., & Turri, S. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.014 · Cited by 399
Kuila, T., Bose, S., Hong, C. E., Uddin, M. E., Khanra, P., Kim, N. H., & Lee, J. H. (2011) · Carbon · doi:10.1016/j.carbon.2010.10.031 · Cited by 342
Reinforcement mechanisms in MWCNT-filled polycarbonate
Eitan, A., Fisher, F. T., Andrews, R., Brinson, L. C., & Schadler, L. S. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.004 · Cited by 333
Percolation and conductivity: A computer study. II
Seager, C. H., & Pike, G. E. (1974) · Physical Review B · doi:10.1103/physrevb.10.1435 · Cited by 284
The potential to enhance membrane module design with 3D printing technology
Lee, J.-Y., Tan, W. S., An, J., Chua, C. K., Tang, C. Y., Fane, A. G., & Chong, T. H. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.11.008 · Cited by 283
Functionalized SWNT/polymer nanocomposites for dramatic property improvement
Ramanathan, T., Liu, H., & Brinson, L. C. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20510 · Cited by 274
3D-Printed Mechanochromic Materials
Peterson, G. I., Larsen, M. B., Ganter, M. A., Storti, D. W., & Boydston, A. J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am506745m · Cited by 273
An Experimental Approach to the Percolation of Sticky Nanotubes
Vigolo, B., Coulon, C., Maugey, M., Zakri, C., & Poulin, P. (2005) · Science · doi:10.1126/science.1112835 · Cited by 268
Drawing and extrusion of semi-crystalline polymers
Peterlin, A. (1987) · Colloid & Polymer Science · doi:10.1007/bf01412215 · Cited by 251
3D printing and additive manufacturing : principles and applications
Chua, C. K., & Leong, K. F. (2015) · Cited by 246
Development of 3D printable formulations containing CNT with enhanced electrical properties
Gonzalez, G., Chiappone, A., Roppolo, I., Fantino, E., Bertana, V., Perrucci, F., Scaltrito, L., Pirri, F., & Sangermano, M. (2017) · Polymer · doi:10.1016/j.polymer.2016.12.051 · Cited by 216
Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Controlling electrical percolation in multicomponent carbon nanotube dispersions
Kyrylyuk, A. V., Hermant, M. C., Schilling, T., Klumperman, B., Koning, C. E., & van der Schoot, P. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.40 · Cited by 207
Thermal degradation of poly(ethylene terephthalate) at the processing temperature
Samperi, F., Puglisi, C., Alicata, R., & Montaudo, G. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00166-6 · Cited by 204
Rymansaib, Z., Iravani, P., Emslie, E., Medvidović‐Kosanović, M., Sak‐Bosnar, M., Verdejo, R., & Marken, F. (2016) · Electroanalysis · doi:10.1002/elan.201600017 · Cited by 176
3D printing of a multifunctional nanocomposite helical liquid sensor
Guo, S., Yang, X., Heuzey, M.-C., & Therriault, D. (2015) · Nanoscale · doi:10.1039/c5nr00278h · Cited by 147
Boparai, K. S., Singh, R., & Singh, H. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1037402 · Cited by 122
Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite
Francis, V., & Jain, P. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1172431 · Cited by 101
3D printed metal columns for capillary liquid chromatography
Sandron, S., Heery, B., Gupta, V., Collins, D. A., Nesterenko, E. P., Nesterenko, P. N., Talebi, M., Beirne, S., Thompson, F., Wallace, G. G., et al. (2014) · The Analyst · doi:10.1039/c4an01476f · Cited by 98
Hierarchical Polymer–Nanotube Composites
Chatterjee, T., Mitchell, C. A., Hadjiev, V. G., & Krishnamoorti, R. (2007) · Advanced Materials · doi:10.1002/adma.200700765 · Cited by 60
Cited by
Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding
Abbasi, H., Antunes, M., & Velasco, J. I. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.02.003 · Cited by 744
Advances in 3D printing of thermoplastic polymer composites and nanocomposites
Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J., & Advincula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 565
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Cardoso, R. M., Kalinke, C., Rocha, R. G., dos Santos, P. L., Rocha, D. P., Oliveira, P. R., Janegitz, B. C., Bonacin, J. A., Richter, E. M., & Munoz, R. A. A. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.03.028 · Cited by 460
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Metadata
- Authors
- Gnanasekaran, K., Heijmans, T., van Bennekom, S., Woldhuis, H., Wijnia, S., de With, G., & Friedrich, H.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 9
- Pages
- 21-28
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W2613920225
- Cited by
- 594
- References
- 30
- FWCI
- 34.85
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.