The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Effects of surface characteristic on frosting and defrosting behaviors of fin-tube heat exchangers
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The uncertainty of the experimental data of the frost layer thickness is 10.1%.”
From Review on the measurement and calculation of frost characteristics (2018) · cites this paper as [108]
In the citing paper
“The super hydrophobic heat exchanger reduced the frost thickness and mass by 17.2% and 28.8%, respectively, compared to the bare heat exchanger.”
In the citing paper
“The super hydrophobic heat exchanger reduced the frost thickness and mass by 17.2% and 28.8%, respectively, compared to the bare heat exchanger.”
Citations
Cites
Dropwise Condensation Modeling Suitable for Superhydrophobic Surfaces
Kim, S., & Kim, K. J. (2011) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4003742 · Cited by 388
Frost formation on a super-hydrophobic surface under natural convection conditions
Liu, Z., Gou, Y., Wang, J., & Cheng, S. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.03.026 · Cited by 223
Experimental study on frost growth and dynamic performance of air source heat pump system
Guo, X.-M., Chen, Y.-G., Wang, W.-H., & Chen, C.-Z. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.01.007 · Cited by 173
界面熱的コンダクタンスのための音響的不整合モデルと拡散不整合モデルの間の内挿:InN/GaN超格子への適用
Kazan, M. (2011) · Cited by 116
Frosting and defrosting characteristics of a fin according to surface contact angle
Kim, K., & Lee, K.-S. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.02.065 · Cited by 108
Huang, L., Liu, Z., Liu, Y., Gou, Y., & Wang, J. (2009) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2009.06.002 · Cited by 108
Huang, D., Ri-Jing, Z., Liu, Y., & Yi, D.-B. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.052 · Cited by 99
Applying refrigerant mixtures with thermal glide in cold climate air-source heat pumps
Hakkaki-Fard, A., Aidoun, Z., & Ouzzane, M. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.10.033 · Cited by 97
Frosting and defrosting on rigid superhydrohobic surface
Jing, T., Kim, Y., Lee, S., Kim, D., Kim, J., & Hwang, W. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.02.105 · Cited by 95
Transient two-dimensional model of frost formation on a fin-and-tube heat exchanger
Lenic, K., Trp, A., & Frankovic, B. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.06.005 · Cited by 92
Cited by
Sorted by citations
Zhang, P., & Lv, F. Y. (2015) · Energy · doi:10.1016/j.energy.2015.01.061 · Cited by 418
Review on improvement for air source heat pump units during frosting and defrosting
Song, M., Deng, S., Dang, C., Mao, N., & Wang, Z. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.022 · Cited by 384
She, X., Cong, L., Nie, B.-J., Leng, G.-H., Peng, H., Chen, Y., Zhang, X., Wen, T., Yang, H.-X., & Luo, Y.-M. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.067 · Cited by 250
Self-citationHeat transfer enhancement in fin-and-tube heat exchangers – A review on different mechanisms
Sadeghianjahromi, A., & Wang, C.-C. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110470 · Cited by 240
Amer, M., & Wang, C.-C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.120 · Cited by 218
Review on the measurement and calculation of frost characteristics
Song, M., & Dang, C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.094 · Cited by 212
Nguyen, D. H., & Ahn, H. S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121601 · Cited by 160
Research of anti-frosting technology in refrigeration and air conditioning fields: A review
Feng, W., Liang, C.-H., & Zhang, X. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.046 · Cited by 142
Self-citationCondensation frosting on meter-scale superhydrophobic and superhydrophilic heat exchangers
Boyina, K., Mahvi, A., Chavan, S., Park, D., Kumar, K., Lira, M., Yu, Y., Gunay, A., Wang, X.-F., & Miljković, N. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118694 · Cited by 86
Mahvi, A. J., Boyina, K., Musser, A., Elbel, S., & Miljkovic, N. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121162 · Cited by 92
A review on the air-to-air heat and mass exchanger technologies for building applications
Zeng, C., Liu, S., & Shukla, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.052 · Cited by 91
Patil, M. S., Seo, J.-H., & Lee, M.-Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.107 · Cited by 86
Review of nature-inspired heat exchanger technology
Huang, Z., Hwang, Y., & Radermacher, R. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.03.006 · Cited by 77
Enhanced condensation heat transfer in air-conditioner heat exchanger using superhydrophobic foils
Wang, S.-L., Yu, X.-Q., Liang, C.-H., & Zhang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.020 · Cited by 68
Self-citationKim, M.-H., Kim, H., Kim, D. R., & Lee, K.-S. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.11.028 · Cited by 68
Zhang, L., Jiang, Y., Dong, J., Yao, Y., & Deng, S. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.016 · Cited by 65
Shen, Y., Jin, M., Wu, X., Tao, J., Luo, X., Chen, H., Yang, L. L., & Xie, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.052 · Cited by 63
Wang, F., Zhou, Y., Yang, W., Ni, M., Zhang, X., & Liang, C. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.114967 · Cited by 60
Self-citationEffect of frost morphology on the thermal-hydraulic performance of fan-supplied tube-fin evaporators
da Silva, D. L., Melo, C., & Hermes, C. J. L. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.165 · Cited by 58
Implementing Superhydrophobic Surfaces within Various Condensation Environments: A Review
Singh, N. S., Zhang, J., Stafford, J., Anthony, C., & Gao, N. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202001442 · Cited by 56
Su, W., & Zhang, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.04.024 · Cited by 52
Self-citationGanesan, P., Vanaki, S., Thoo, K. K., & Chin, W.-M. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.02.017 · Cited by 55
Esmeryan, K., Castano, C., Mohammadi, R., Lazarov, Y., & Radeva, E. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aaa188 · Cited by 45
Zheng, X., Shi, R., You, S.-J., Han, Y., & Shi, K. (2019) · Sustainable cities and society · doi:10.1016/j.scs.2019.101667 · Cited by 46
Pu, L., Liu, R., Huang, H., Zhang, S., Qi, Z., Xu, W., & Zhou, J. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110382 · Cited by 50
Wu, X., Chu, F., Ma, Q., & Zhu, B. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.03.011 · Cited by 48
Su, W., Li, W., Zhou, J.-M., & Zhang, X. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.085 · Cited by 40
Self-citationDefrosting performance of superhydrophobic fin-tube heat exchanger
Feng, W., Liang, C.-H., Zhang, Y., & Zhang, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.028 · Cited by 47
Self-citationRealization of Superhydrophobic Surfaces Based on Three-Dimensional Printing Technology
Kang, B., Sung, J., & So, H. (2019) · International Journal of Precision Engineering and Manufacturing - Green Technology · doi:10.1007/s40684-019-00163-9
Heu, C. S., Kim, S. W., Kim, J., Lee, S., Kim, J. M., Lee, K.-S., & Kim, D. R. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.146 · Cited by 45
Qu, M., Lu, M., Li, Z., Song, X., Chen, J., Ziviani, D., & Braun, J. E. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110014 · Cited by 46
A novel hybrid frost detection and defrosting system for domestic refrigerators
Malik, A. N., Khan, S. A., & Lazoglu, I. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.05.016 · Cited by 44
Chang, S.-H., Jang, H., Jeon, J., Lee, K.-S., & Kim, D. R. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110139 · Cited by 43
Review on frosting, defrosting and frost management techniques in industrial food freezers
Badri, D., Toublanc, C., Rouaud, O., & Michel Havet, C. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111545 · Cited by 45
Li, D., Qian, C.-L., Gao, S.-W., Zhao, X.-B., & Zhou, Y.-M. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.04.022 · Cited by 36
Zhang, Y., Zhang, G.-M., Zhang, A., Jin, Y., Ru, R.-R., & Tian, M.-C. (2018) · Energies · doi:10.3390/en11102642 · Cited by 37
Zhu, Z.-W., Zhang, Y., & Sun, D.-W. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.02.034 · Cited by 30
Wang, F., Liang, C., Yang, M., & Zhang, X. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.003 · Cited by 41
Self-citationLi, K., Xia, D., Luo, S., Zhao, Y., Tu, R., Zhou, X., Zhang, H., & Su, L. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117766 · Cited by 40
Wang, F., Liang, C., & Zhang, X. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.051 · Cited by 40
Self-citationZhang, L., Jiang, Y., Dong, J., Yao, Y., & Deng, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114063 · Cited by 40
Yang, S., Li, Q., Du, B., Ying, Y., Zeng, Y., Jin, Y., Qin, X., Gao, S., Wang, S., Wang, Z., et al. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acef78 · Cited by 39
Feng, W., Liang, C.-H., Zhang, X., & Zhang, Y. (2018) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2018.01.022 · Cited by 32
Self-citationOpportunities in Nano-Engineered Surface Designs for Enhanced Condensation Heat and Mass Transfer
Ho, J. Y., Rabbi, K. F., Khodakarami, S., Ma, J., Boyina, K. S., & Miljkovic, N. (2022) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4053454 · Cited by 39
Zhang, L., Song, M., Mao, N., & Dong, J. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122192 · Cited by 38
Wei, W., Jin, X., Dong, Q., Ni, L., Zhao, S., Wang, W., & Sun, Y. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119356 · Cited by 38
Sessile droplet freezing on polished and micro-micro-hierarchical silicon surfaces
Wang, Y., & Wang, Z.-G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.068 · Cited by 31
Frosting in heat pump evaporators part A: experimental investigation
Reichl, C., Sandström, C., Hochwallner, F., Linhardt, F., Popovac, M., & Emhofer, J. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117487 · Cited by 34
Tan, H., Zhang, X., Zhang, L., Tao, T., & Xu, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.01.094 · Cited by 35
Self-citationZhang, Y., He, F., Zhang, G.-M., Qu, X.-H., & Tian, M.-C. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123416 · Cited by 32
Wang, F., Liang, C., Yang, W., & Zhang, X. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110134 · Cited by 30
Self-citationZhang, L., Song, M., Hosseini, S. H., Shen, J., & Jiang, Y. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122093 · Cited by 29
Sarmiento, A. P., de Sá Sarmiento, F. I. P., Shooshtari, A., & Ohadi, M. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123680 · Cited by 29
Bharathidasan, T., & Sathyanaryanan, S. (2020) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.105828 · Cited by 29
Hu, H., Lai, Z., & Ding, G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.01.010 · Cited by 28
Anti-frosting characteristics of superhydrophobic-hydrophilic wettability switchable surfaces
Lee, H., Yang, J.-B., & Kim, D. R. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.125035 · Cited by 25
Feng, W., Liang, C.-H., & Zhang, X. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.01.008 · Cited by 27
Self-citationNakajima, D., Kikuchi, T., Natsui, S., & Suzuki, R. O. (2018) · RSC Advances · doi:10.1039/c8ra07712f · Cited by 27
Frosting in a heat pump evaporator part B: Numerical analysis
Popovac, M., Emhofer, J., & Reichl, C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117488 · Cited by 26
Defrosting behavior and performance on vertical plate for surfaces of varying wettability
Kim, H., Jin, G., Jeon, J., Lee, K.-S., & Kim, D. R. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.054 · Cited by 25
Seo, D., Oh, S., Moon, B., Kim, H., Kim, J., Lee, C., & Nam, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.131 · Cited by 26
Image processing for frost thickness measurement in fin-and-tube heat exchangers
Lee, W.-J., & Kyung Kwon, O. (2021) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2021.100937 · Cited by 25
Review and prospect of air source heat pump research: A bibliometric insight
Jiang, S., Zhao, H., & Ni, L. (2024) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2024.11.029 · Cited by 20
Frost formation and freeze protection with bypass for counter-flow recuperators
Jedlikowski, A., Anisimov, S., Danielewicz, J., KARPUK, M. M., & Pandelidis, D. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.12.047 · Cited by 24
Abbas, S., & Park, C. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120883 · Cited by 25
Park, J.-S., Kim, J., & Lee, K.-S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.01.043 · Cited by 24
Early stage condensation frosting characteristics on plain and nano Al2O3-epoxy mixture-coated brass
Wang, Y., & Cheng, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113971 · Cited by 19
Ye, Z., Shi, J., & Chen, J. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117066 · Cited by 23
Defrosting on horizontal hydrophobic surfaces and the shrink angle
Chu, F., Wu, X.-M., & Zhu, Y. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.08.005 · Cited by 23
Lee, W.-J., Bae, K. J., & Kwon, O. K. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115424 · Cited by 22
Li, K., Xia, D., Bao, J., Luo, S., Zhang, H., Liu, N., Su, L., & Sheng, L. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101281 · Cited by 22
Anti-frosting operation and regulation technology of air-water dual-source heat pump evaporator
Zhong, H., Li, Z., Long, J., Xia, K., Lu, H., & Yongga, A. (2022) · Energy · doi:10.1016/j.energy.2022.124393 · Cited by 21
Gulfam, R., & Zhang, P. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.05.055 · Cited by 21
Wei, H., Li, Z., Guo, X., Yang, X., & Dong, W. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122284 · Cited by 19
Performance study of an active-passive combined anti-frosting method for fin-tube heat exchanger
Lyu, N., Shao, Z., He, H., Wang, F., Liang, C., & Zhang, X. (2022) · Building and Environment · doi:10.1016/j.buildenv.2022.109365 · Cited by 19
Self-citationLiang, X.-Y., & Wu, L. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.112366 · Cited by 18
Yang, K.-S., Zheng, J.-W., Wu, K.-L., & Wu, Y.-L. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121338 · Cited by 17
Xing, Q., Gu, Y., Han, Y., Li, S., Wang, B., Li, Y., & He, G. (2024) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2024.109497 · Cited by 17
Suppressing Condensation Frosting Using an Out-of-Plane Dry Zone
Ahmadi, S. F., Spohn, C., Nath, S., & Boreyko, J. B. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c03054 · Cited by 16
He, H., Lyu, N., Liang, C.-H., Wang, F., & Zhang, X.-S. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124926 · Cited by 15
Self-citationAmer, M., & Wang, C. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120560 · Cited by 16
Frost layer thickness measurement and calculation: A short review
Song, M., Dang, C., Liu, S.-C., Sun, Z.-L., & Mao, N. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.281 · Cited by 13
Wang, Y., & Wang, Z.-G. (2019) · Journal of Coatings Technology and Research · doi:10.1007/s11998-018-00163-5 · Cited by 14
Calculation methodology for geometrical characteristics of the forming tool for rib cold rolling
Oleinik, A., Kapitanov, A., Alexandrov, I. A., & Tatarkanov, A. A. (2020) · Istrazivanja i projektovanja za privredu · doi:10.5937/jaes18-25211 · Cited by 14
Hu, W., Wang, J., Zhang, Y., Guan, Y., Lin, Y., & Zhao, S. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119532 · Cited by 14
Superhydrophobic Microchannel Heat Exchanger for Electric Vehicle Heat Pump Performance Enhancement
Sui, Y., Sui, Z., Liang, G., & Wu, W. (2023) · Sustainability · doi:10.3390/su151813998 · Cited by 14
Wu, S., Zhao, R., Huang, D., Sun, Y. J., & Wei, X. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.12.010 · Cited by 15
Effect of surface wettability on dust removal characteristics during frosting cleaning process
Li, Y., Li, M., & Dang, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120592 · Cited by 14
Division of Frosting Type and Frosting Degree of the Air Source Heat Pump for Heating in China
Tang, R., Wang, F., Wang, Z., & Yang, W.-B. (2021) · Frontiers in Energy Research · doi:10.3389/fenrg.2021.708478 · Cited by 12
Self-citationLi, R., Wang, Z., Chen, M., Li, Z., Luo, X., Lu, J. W. Z., & Gu, Z. (2022) · Materials · doi:10.3390/ma15093060 · Cited by 13
Literature Review of Frost Formation Phenomena on Domestic Refrigerators Evaporators
Krasota, D., Błasiak, P., & Kolasiński, P. (2023) · Energies · doi:10.3390/en16072945 · Cited by 13
Rahman, H. U., Akbar, H., Malik, A. N., Nawaz, T. H., & Lazoğlu, İ. (2024) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2024.01.026 · Cited by 12
Experimental research on hot liquid defrosting system with multiple evaporators
Niu, J., Ma, G., & Xu, S. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115710 · Cited by 12
Designing a tool for cold knurling of fins
Olejnik, A., Kapitanov, A., Alexandrov, I. A., & Tatarkanov, A. A. (2020) · Istrazivanja i projektovanja za privredu · doi:10.5937/jaes18-25786 · Cited by 11
The effect of surface wettability on frost melting
Liu, Y., & Kulacki, F. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.104 · Cited by 10
Performance improvement of vapor compression heat pump with superhydrophobic finned-tube evaporator
Li, R., Wang, Z.-S., Zhang, Y., Li, Z., Luo, X.-W., Lu, W.-Z., & Gu, Z. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109013 · Cited by 11
Qiang, W., Lan, Z., Liu, Y., Liu, Y., Xu, W., Wen, R., & Ma, X. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.125139 · Cited by 8
Frosting Performance of a Nanoporous Hydrophilic Aluminum Surface
Yang, W.-S., Zeng, B., Zhang, Y.-M., He, S., & Zhao, X.-D. (2018) · Energies · doi:10.3390/en11123483 · Cited by 8
Investigation on thermal-hydraulic performance of outdoor heat exchanger in air sources heat pump
Fang, Z., Li, L., Cheng, Y. C., Wang, P., & Oladokun, M. O. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.01.008 · Cited by 7
Lyu, N., He, H. R., Liu, J., Liang, C., Zhang, X., & Wang, F. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121430 · Cited by 7
Self-citation
Metadata
- Authors
- Wang, F., Liang, C., Yang, M., Fan, C., & Zhang, X.
- Affiliations
- Southeast University (CN)
- Corresponding author
- Liang, Caihua
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2015-01
- Volume
- 75
- Pages
- 1126-1132
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2065119035
- Cited by
- 142
- References
- 18
- Citations by year
- 2026: 9 · 2025: 7 · 2024: 15 · 2023: 13 · 2022: 10 · 2021: 17 · 2020: 19 · 2019: 12 · 2018: 15 · 2017: 14 · 2016: 9 · 2015: 2
- FWCI
- 9.72
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Applied Thermal Engineering (publishedVersion)
- Funders
- National Natural Science Foundations of China (51106023)
- Five Year Science and Technology Support Key Project of China (2011BAJ03B14)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
- Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Keywords
- finned tube heat exchanger, frost formation, thawing, air-source heat pump, superhydrophobic surfaces, wettability, frost layer growth, frost melting, air-side pressure drop
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
