The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity
Open accessAbstract
The incorporation of hydroxyapatite (HAP) into poly-l-lactic acid (PLLA) matrix serving as bone scaffold is expected to exhibit bioactivity and osteoconductivity to those of the living bone. While too low degradation rate of HAP/PLLA scaffold hinders the activity because the embedded HAP in the PLLA matrix is difficult to contact and exchange ions with body fluid. In this study, biodegradable polymer poly (glycolic acid) (PGA) was blended into the HAP/PLLA scaffold fabricated by laser 3D printing to accelerate the degradation. The results indicated that the incorporation of PGA enhanced the degradation rate of scaffold as indicated by the weight loss increasing from 3.3% to 25.0% after immersion for 28 days, owing to the degradation of high hydrophilic PGA and the subsequent accelerated hydrolysis of PLLA chains. Moreover, a lot of pores produced by the degradation of the scaffold promoted the exposure of HAP from the matrix, which not only activated the deposition of bone like apatite on scaffold but also accelerated apatite growth. Cytocompatibility tests exhibited a good osteoblast adhesion, spreading and proliferation, suggesting the scaffold provided a suitable environment for cell cultivation. Furthermore, the scaffold displayed excellent bone defect repair capacity with the formation of abundant new bone tissue and blood vessel tissue, and both ends of defect region were bridged after 8 weeks of implantation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of bone tissue engineering scaffolds
Wang, C., Huang, W., Zhou, Y., He, L., He, Z., Chen, Z., He, X., Tian, S., Liao, J., Lu, B., et al. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.01.004 · Cited by 661
Lai, Y., Li, Y., Cao, H., Long, J., Wang, X., Li, L., Li, C., Jia, Q., Teng, B., Tang, T., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.01.013 · Cited by 521
Shuai, C., Liu, G., Yang, Y., Qi, F., Peng, S., Yang, W., He, C., Wang, G., & Qian, G. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104825 · Cited by 406
Self-citationJiang, D., He, Z., Wang, C., Zhou, Y., Li, F., Pu, W., Zhang, X., Feng, X., Zhang, M., Yecheng, X., et al. (2018) · Cell Death & Disease · doi:10.1038/s41419-018-1236-z · Cited by 372
A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair
Feng, P., Wu, P., Gao, C., Yang, Y., Guo, W., Yang, W., & Shuai, C. (2018) · Advanced Science · doi:10.1002/advs.201700817 · Cited by 365
Self-citationHassanajili, S., Karami-Pour, A., Oryan, A., & Talaei-Khozani, T. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109960 · Cited by 346
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
3D neural tissue models: From spheroids to bioprinting
Zhuang, P., Sun, A. X., An, J., Chua, C. K., & Chew, S. Y. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2017.10.002 · Cited by 270
Kuang, T., Chen, F., Chang, L., Zhao, Y., Fu, D., Gong, X., & Peng, X. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.023 · Cited by 221
Biological properties of calcium phosphate biomaterials for bone repair: a review
Lu, J., Yu, H., & Chen, C. (2018) · RSC Advances · doi:10.1039/c7ra11278e · Cited by 214
Recent concepts in biodegradable polymers for tissue engineering paradigms: a critical review
Iqbal, N., Khan, A. S., Asif, A., Yar, M., Haycock, J. W., & Rehman, I. U. (2019) · International Materials Reviews · doi:10.1080/09506608.2018.1460943 · Cited by 208
Yang, Y., Yang, S., Wang, Y., Yu, Z., Ao, H., Zhang, H., Qin, L., Guillaume, O., Eglin, D., Richards, R. G., et al. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.035 · Cited by 158
Sadhasivam, S., Fang, Y.-H., Savitha, S., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.09.044 · Cited by 143
Shuai, C., Yu, L., Feng, P., Gao, C., & Peng, S. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.111083 · Cited by 118
Self-citationSupercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release
Milovanović, S. L., Marković, D., Mraković, A., Kuska, R., Žižović, I., Frerich, S., & Ivanović, J. Z. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.106 · Cited by 107
The nanofibrous architecture of poly(l-lactic acid)-based functional copolymers
Liu, X., & Ma, P. X. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.046 · Cited by 104 · cited 1×
“[16] synthesized poly (hydroxyalkyl (meth)acrylate)-graft-poly (L-lactic acid) (PHAA-g-PLLA) copolymer by ringopening polymerization of LLA and HAA, and the results indicated that the degradation rate of the copolymer was substantially accelerated than that of PLLA because the introduction of hydroxyl groups into poly…”
MethodZhou, C., Ye, X., Fan, Y., Ma, L., Tan, Y., Qing, F., & Zhang, X. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035013 · Cited by 101
He, S., Yang, S. L., Zhang, Y., Li, X., Gao, D., Zhong, Y., Cao, L., Ma, H., Liu, Y., Li, G., et al. (2019) · Cell Death and Disease · doi:10.1038/s41419-019-2148-2 · Cited by 100
Self-citationBüyüksungur, S., Tanır, T. E., Büyüksungur, A., Bektas, E. I., Köse, G. T., Yücel, D., Beyzadeoğlu, T., Cetinkaya, E., Yenigun, C., Tönük, E., et al. (2017) · Biomaterials Science · doi:10.1039/c7bm00514h · Cited by 99
Kim, J., Ahn, G., Kim, C., Lee, J., Lee, I., An, S., Yun, W., Kim, S., & Shim, J. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800025 · Cited by 97
Wang, Z., Wang, Y., Ito, Y., Zhang, P., & Chen, X. (2016) · Scientific Reports · doi:10.1038/srep20770 · Cited by 93
Liu, K., Li, W., Chen, S., Wen, W., Lu, L., Liu, M., Zhou, C., & Luo, B. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108001 · Cited by 87
PGA-incorporated collagen: Toward a biodegradable composite scaffold for bone-tissue engineering
Toosi, S. H., Naderi‐Meshkin, H., Kalalinia, F., Peivandi, M. T., Hosseinkhani, H., Bahrami, A. R., Heirani‐Tabasi, A., Mirahmadi, M., & Behravan, J. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35736 · Cited by 84
Liu, G., Fu, M., Li, F., Fu, W., Zhao, Z., Xia, H., & Niu, Y. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110810 · Cited by 73
Golzar, H., Mohammadrezaei, D., Yadegari, A., Rasoulianboroujeni, M., Hashemi, M., Omidi, M., Yazdian, F. A., Shalbaf, M., & Tayebi, L. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107749 · Cited by 71
Cao, L., Liu, W., Zhong, Y., Zhang, Y., Gao, D., He, T., Liu, Y., Zi, Z., Mo, Y., Peng, S., et al. (2020) · Cell Proliferation · doi:10.1111/cpr.12814 · Cited by 69
Self-citationLuo, W., Cheng, L., Yuan, C., Wu, Z., Yuan, G., Hou, M., Chen, J. Y., Luo, C., & Li, W. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.05.052 · Cited by 68
Tian, T., Xie, W., Gao, W., Wang, G., Zeng, L., Miao, G., Lei, B., Lin, Z., & Chen, X. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00186 · Cited by 64
Ayyoob, M., & Kim, Y. J. (2018) · Polymers · doi:10.3390/polym10101132 · Cited by 62
Lee, S., Joshi, M. K., Tiwari, A. P., Maharjan, B., Kim, K. S., Yun, Y., Park, C. H., & Kim, C. S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.158 · Cited by 60
Advances in the occurrence and biotherapy of osteoporosis
Zi, Z., Liu, W. X., Cao, L., Liu, Y., He, T., Peng, S., & Shuai, C. (2020) · Biochemical Society Transactions · doi:10.1042/bst20200005 · Cited by 60
Self-citationHuang, Q., Liu, Y., Ouyang, Z., & Feng, Q. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.06.018 · Cited by 57
Aydin, E., Planell, J. A., & Hasırcı, V. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4435-z · Cited by 56
Goulart, C. O., Lopes, F. R. P., Monte, Z. L. O., Dantas, S. V., Souto, A., Oliveira, J. T., de Almeida, F. M., Tonda‐Turo, C., Pereira, C. C., Borges, C. P., et al. (2015) · Methods · doi:10.1016/j.ymeth.2015.09.008 · Cited by 50
Biomimetic composite scaffold from an in situ hydroxyapatite coating on cellulose nanocrystals
Huang, C., Bhagia, S., Hao, N., Meng, X., Liang, L., Yong, Q., & Ragauskas, A. J. (2019) · RSC Advances · doi:10.1039/c8ra09523j · Cited by 46
Nezafati, N., Farokhi, M., Heydari, M. Z., Hesaraki, S., & Nasab, N. A. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107146 · Cited by 40
Shuai, C., Li, S., Yang, W., Yang, Y., Deng, Y., & Gao, C. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108679 · Cited by 40
Self-citationThe effect of the type of HA on the degradation of PLGA/HA composites
Naik, A., Shepherd, D. V., Shepherd, J. H., Best, S. M., & Cameron, R. E. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.048 · Cited by 35
The nature of polymer grafts and substrate shape on the surface degradation of poly( l ‐lactide)
Nugroho, R. W. N., Odelius, K., Höglund, A., & Albertsson, A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42736 · Cited by 27
Dong, Z., Yang, Q., Mei, M., Liu, L., Sun, J., Li, Z., & Zhou, C. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.02.009 · Cited by 27
Castillejos-Mosqueda, S. L., Cerna, J., Meléndez, F. J., Castro, M. E., Aguilar, R., Beltrán, C. M., & González‐Torres, M. (2018) · Polymers · doi:10.3390/polym10111184 · Cited by 26
Vlad, M. D., Fernández, E., González, S. G., Ivanov, I. C., Sindilar, E. V., Poeată, I., Iencean, A. S., Butnaru, M., Avădănei, E. R., & López, J. L. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110658 · Cited by 26
Zhao, M. L., Sui, G., Deng, X., Lu, J., Ryu, S., & Yang, X. P. (2006) · Advanced materials research · doi:10.4028/www.scientific.net/amr.11-12.243 · Cited by 19
Preparation of poly(lactic acid)/sintered hydroxyapatite composite biomaterial by supercritical CO2
Zhang, Y., Wang, J., Wang, J., Ma, Y., Han, B., Niu, X., Liu, J., Gao, L., Wang, J., Wang, J., et al. (2017) · Bio-Medical Materials and Engineering · doi:10.3233/bme-171713 · Cited by 18
Beibei, D., Fan, T., Jiafeng, L., Li, G., Zhang, Q., Ye, W., Tai, H., Wenxin, W., & Fan, Z. (2019) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201800528 · Cited by 18
Thevar, J.-T. K., Malek, N. A. N. N., & Kadir, M. R. A. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.09.060 · Cited by 17
Ayyoob, M., Yang, X. M., Park, H.-J., Park, S., Kim, J., Nam, S. W., & Kim, Y. J. (2019) · Fibers and Polymers · doi:10.1007/s12221-019-1143-7 · Cited by 15
Tang, Y., Liu, J., Wang, Z., Wang, Y., Cui, L., Zhang, P., & Chen, X. (2014) · Chinese Journal of Polymer Science · doi:10.1007/s10118-014-1454-5 · Cited by 12
Cited by
Zhu, G., Zhang, T., Chen, M., Yao, K., Huang, X., Zhang, B., Li, Y., Liu, J., Wang, Y., & Zhao, Z. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.043 · Cited by 494
Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction
Shi, H., Zhou, Z., Li, W., Fan, Y., Li, Z., & Wei, J. (2021) · Crystals · doi:10.3390/cryst11020149 · Cited by 310
Biopolymeric sustainable materials and their emerging applications
Arif, Z. U., Khalid, M. Y., Sheikh, M. F., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108159 · Cited by 288
Dielectric and biodegradation properties of biodegradable nano-hydroxyapatite/starch bone scaffold
You, B. C., Meng, C. E., Mohd Nasir, N. F., Mohd Tarmizi, E. Z., Fhan, K. S., Kheng, E. S., Abdul Majid, M. S., & Mohd Jamir, M. R. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.04.014 · Cited by 44
Recent Advances in Nanoplatforms for the Treatment of Osteosarcoma
Wu, K., Yu, B., Li, D., Tian, Y., Liu, Y., & Jiang, J. (2022) · Frontiers in Oncology · doi:10.3389/fonc.2022.805978 · Cited by 39
Metadata
- Authors
- Shuai, C., Yang, W., Feng, P., Peng, S., & Pan, H.
- Venue
- Bioactive Materials
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 6
- Issue
- 2
- Pages
- 490-502
- ISSN
- 2097-1192 (ISSN-L)
- 2452-199X
- OpenAlex
- W3086050160
- Cited by
- 424
- References
- 48
- FWCI
- 17.92
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.