The DOI matches its Crossref record; 130 of the 130 references it cites were found in a registry or an index.
Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants
Open accessAbstract
The two leading causes of failure for joint arthroplasty prostheses are aseptic loosening and periprosthetic joint infection. With the number of primary and revision joint replacement surgeries on the rise, strategies to mitigate these failure modes have become increasingly important. Much of the recent work in this field has focused on the design of coatings either to prevent infection while ignoring bone mineralization or vice versa, to promote osseointegration while ignoring microbial susceptibility. However, both coating functions are required to achieve long-term success of the implant; therefore, these two modalities must be evaluated in parallel during the development of new orthopaedic coating strategies. In this review, we discuss recent progress and future directions for the design of multifunctional orthopaedic coatings that can inhibit microbial cells while still promoting osseointegration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bacterial Biofilms: A Common Cause of Persistent Infections
Costerton, J. W., Stewart, P. S., & Greenberg, E. P. (1999) · Science · doi:10.1126/science.284.5418.1318 · Cited by 12,167
Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
Bacterial biofilms: from the Natural environment to infectious diseases
Hall-Stoodley, L., Costerton, J. W., & Stoodley, P. (2004) · Nature Reviews Microbiology · doi:10.1038/nrmicro821 · Cited by 7,143
Osteoclast differentiation and activation
Boyle, W. J., Simonet, W. S., & Lacey, D. L. (2003) · Nature · doi:10.1038/nature01658 · Cited by 6,670 · cited 1×
“Osteoclastogenesis requires signaling cues such as colony-stimulating factor-1 (CSF-1) and receptor activator of nuclear factor-kB ligand (RANKL) [144,145].”
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Antimicrobial and host-defense peptides as new anti-infective therapeutic strategies
Hancock, R. E. W., & Sahl, H.-G. (2006) · Nature Biotechnology · doi:10.1038/nbt1267 · Cited by 4,208
Bone Resorption by Osteoclasts
Teitelbaum, S. L. (2000) · Science · doi:10.1126/science.289.5484.1504 · Cited by 3,962
Cytotoxicity and Genotoxicity of Silver Nanoparticles in Human Cells
AshaRani, P. V., Low Kah Mun, G., Hande, M. P., & Valiyaveettil, S. (2009) · ACS Nano · doi:10.1021/nn800596w · Cited by 3,692
Bacterial Biofilms in Nature and Disease
Costerton, J. W., Cheng, K. J., Geesey, G. G., Ladd, T. I., Nickel, J. C., Dasgupta, M., & Marrie, T. J. (1987) · Annual Review of Microbiology · doi:10.1146/annurev.mi.41.100187.002251 · Cited by 3,145
Chitosan as antimicrobial agent: applications and mode of action.
Rabea, E. I., Badawy, M. E.-T., Stevens, C. V., Smagghe, G., & Steurbaut, W. (2003) · Biomacromolecules · doi:10.1021/bm034130m · Cited by 3,123
Cited by
Implant infections: adhesion, biofilm formation and immune evasion
Arciola, C. R., Campoccia, D., & Montanaro, L. (2018) · Nature Reviews Microbiology · doi:10.1038/s41579-018-0019-y · Cited by 2,241
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Zhang, L., & Chen, L. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801215 · Cited by 1,100
Physico-chemistry from initial bacterial adhesion to surface-programmed biofilm growth
Carniello, V., Peterson, B. W., van der Mei, H. C., & Busscher, H. J. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.10.005 · Cited by 447
Surface Design for Antibacterial Materials: From Fundamentals to Advanced Strategies
Li, W., Thian, E. S., Wang, M., Wang, Z., & Ren, L. (2021) · Advanced Science · doi:10.1002/advs.202100368 · Cited by 429
Titanium Coatings and Surface Modifications: Toward Clinically Useful Bioactive Implants
Civantos, A., Martínez-Campos, E., Ramos, V., Elvira, C., Gallardo, A., & Abarrategi, A. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00604 · Cited by 338
Bioinspired surface modification of orthopedic implants for bone tissue engineering
Hu, C., Ashok, D., Nisbet, D. R., & Gautam, V. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119366 · Cited by 324
Su, K., Tan, L., Liu, X., Cui, Z., Zheng, Y., Li, B., Han, Y., Li, Z., Zhu, S., Liang, Y., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b08686 · Cited by 294
Porous Titanium Implants: A Review
Pałka, K., & Pokrowiecki, R. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700648 · Cited by 279
Cheng, H., Yue, K., Kazemzadeh-Narbat, M., Liu, Y., Khalilpour, A., Li, B., Zhang, Y. S., Annabi, N., & Khademhosseini, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16779 · Cited by 264
Combating Implant Infections: Shifting Focus from Bacteria to Host
Amin Yavari, S., Castenmiller, S. M., van Strijp, J. A. G., & Croes, M. (2020) · Advanced Materials · doi:10.1002/adma.202002962 · Cited by 257
Shen, X., Zhang, Y., Gu, Y., Xu, Y., Liu, Y., Li, B., & Chen, L. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.08.023 · Cited by 253
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Munir, M. U., Salman, S., Ihsan, A., & Elsaman, T. (2022) · International Journal of Nanomedicine · doi:10.2147/ijn.s360670 · Cited by 132
“infection is caused by the prevalence of the disease, and death may occur, which is truly overwhelming for the community and patient.(141) Because of these, it is required to make a new path for implants in bone tissue regeneration.”
Background3D printing and modelling of customized implants and surgical guides for non-human primates.
Chen, X., Possel, J. K., Wacongne, C., van Ham, A. F., Klink, P. C., & Roelfsema, P. R. (2017) · Journal of Neuroscience Methods · doi:10.1016/j.jneumeth.2017.05.013 · Cited by 106
Tuning the surface potential to reprogram immune microenvironment for bone regeneration
Li, M., Chu, X., Wang, D., Jian, L., Liu, L., Yao, M., Zhang, D., Zheng, Y., Liu, X., Zhang, Y., et al. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121408 · Cited by 72
Research Progress of Polydopamine Hydrogel in the Prevention and Treatment of Oral Diseases
Zhou, Y., Yang, Y., Liu, R., Zhou, Q., Lu, H., & Zhang, W. (2023) · International Journal of Nanomedicine · doi:10.2147/ijn.s407044 · Cited by 36
Zarghami, V., Ghorbani, M., Bagheri, K. P., & Shokrgozar, M. A. (2021) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-021-06551-5 · Cited by 26
Metadata
- Authors
- Raphel, J., Holodniy, M., Goodman, S. B., & Heilshorn, S. C.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2016-04
- Volume
- 84
- Pages
- 301-314
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2265531934
- Cited by
- 674
- References
- 130
- FWCI
- 80.32
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.