The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing
Abstract
Abstract Lightweight cellular structure generation and topology optimization are common design methodologies in additive manufacturing. In this work, we present a novel optimization strategy for designing functionally graded cellular structures with desired mechanical properties. This approach is mainly by generating variable-density gyroid structure and then performing graded structure optimization. Firstly, the geometric properties of the original gyroid structures are analyzed, and the continuity and connectivity of the structures are optimized by adding a penalty function. Then, a homogenization method is used to obtain mechanical properties of gyroid-based cellular structures through a scaling law as a function of their relative densities. Secondly, the scaling law is added directly into the structure optimization algorithm to compute the optimal density distribution in part being optimized. Thirdly, the density mapping and interpolation approach are used to map the output of structure optimization into the parametric gyroid structure which results in an optimum lightweight lattice structure with uniformly varying densities across the design space. Lastly, the effectiveness and robustness of the optimized results are analyzed through finite element analysis and experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
The COC algorithm, Part II: Topological, geometrical and generalized shape optimization
Zhou, M., & Rozvany, G. I. N. (1991) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(91)90046-9 · Cited by 1,827
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Generalized shape optimization without homogenization
Rozvany, G. I. N., Zhou, M., & Birker, T. (1992) · Structural Optimization · doi:10.1007/bf01742754 · Cited by 1,126
A critical review of established methods of structural topology optimization
Rozvany, G. I. N. (2009) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-007-0217-0 · Cited by 1,078
Level-set methods for structural topology optimization: a review
van Dijk, N. P., Maute, K., Langelaar, M., & van Keulen, F. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0912-y · Cited by 1,008
Multifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572
Advanced lattice support structures for metal additive manufacturing
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.020 · Cited by 454
The mechanics and design of a lightweight three-dimensional graphene assembly
Qin, Z., Jung, G. S., Kang, M. J., & Buehler, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1601536 · Cited by 453
Xia, L., Xia, Q., Huang, X., & Xie, Y. M. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-016-9203-2 · Cited by 419
Self-citationA new approach to the design and optimisation of support structures in additive manufacturing
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4403-x · Cited by 389
Design of lattice structures with controlled anisotropy
Xu, S., Shen, J., Zhou, S., Huang, X., & Xie, Y. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.007 · Cited by 351
Self-citationMahmoud, D., & Elbestawi, M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020013 · Cited by 338
Design of lattice structure for additive manufacturing
Tao, W., & Leu, M. C. (2016) · 2016 International Symposium on Flexible Automation (ISFA) · doi:10.1109/isfa.2016.7790182 · Cited by 316
Build-to-last: strength to weight 3D printed objects
Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., & Chen, B. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601168 · Cited by 290
Cost-effective printing of 3D objects with skin-frame structures
Wang, W., Wang, T. Y., Yang, Z., et al. (2013) · ACM Transactions on Graphics · doi:10.1145/2508363.2508382 · Cited by 252
Yánez, A., Cuadrado, A., Martel, O., Afonso, H., & Monopoli, D. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.050 · Cited by 252
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
Cheng, L., Zhang, P., Biyikli, E., Bai, J., Robbins, J., & To, A. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2016-0069 · Cited by 229
Concurrent design with connectable graded microstructures
Wang, Y., Chen, F., & Wang, M. Y. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.12.007 · Cited by 204
Tang, Y., Kurtz, A., & Zhao, Y. F. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.06.001 · Cited by 198
Self-citationA survey of the design methods for additive manufacturing to improve functional performance
Tang, Y., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2015-0011 · Cited by 193
Self-citationSelf-supporting rhombic infill structures for additive manufacturing
Wu, J., Wang, C. C. L., Zhang, X., et al. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.07.006 · Cited by 189
Optimisation of functionally graded lattice structures using isostatic lines
Daynes, S., Feih, S., Lu, W. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.082 · Cited by 177
Cheng, L., Liu, J., Liang, X. Y., & To, A. C. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.12.024 · Cited by 141
Cross-sectional structural analysis for 3D printing optimization
Umetani, N., & Schmidt, R. (2013) · SIGGRAPH Asia Technical Briefs · doi:10.1145/2542355.2542361 · Cited by 131
Design of truss-like cellular structures using relative density mapping method
Alzahrani, M. A., Choi, S.-K., & Rosen, D. W. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.180 · Cited by 119
Wang, X., Zhang, P., Ludwick, S. J., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.001 · Cited by 108
Support structure design in additive manufacturing based on topology optimization
Kuo, Y.-H., Cheng, C.-C., Lin, Y., & San, C.-H. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1743-z · Cited by 103
3D Texture Mapping for Rapid Manufacturing
Chen, Y. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738509 · Cited by 93
Cheng, L., Liu, J., & To, A. C. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1905-7 · Cited by 69
Wang, W., Liu, Y., Wu, J., Tian, S., Wang, C. C. L., Liu, L., & Liu, X. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2764462 · Cited by 67
Design Optimization of Irregular Cellular Structure for Additive Manufacturing
Song, G., Jing, S., Zhao, F.-L., Wang, Y., Xing, H., & Zhou, J. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0168-3 · Cited by 25
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Topology optimization of multi-scale structures: a review
Wu, J., Sigmund, O., & Groen, J. P. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-021-02881-8 · Cited by 688
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Metadata
- Authors
- Li, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y. M.
- Venue
- Computer-Aided Design
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 104
- Pages
- 87-99
- ISSN
- 0010-4485 (ISSN-L)
- OpenAlex
- W2819724056
- Cited by
- 303
- References
- 43
- FWCI
- 26.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.