Mechanical and barrier properties of nanocrystalline cellulose reinforced chitosan based nanocomposite films
Open accessThe DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Abstract
Nanocrystalline cellulose (NCC) reinforced chitosan-based biodegradable films were prepared by solution casting. The NCC content in the films was varied from 1 to 10% (dry wt. basis). It was found that the tensile strength (TS) of the nanocomposite films with 5% (w/w) NCC content was optimum with an improvement of 26% compared to the control chitosan films. Incorporation of NCC also significantly improved barrier properties. Water vapor permeability (WVP) of the chitosan/NCC films was decreased by 27% for the optimum 5% (w/w) NCC content. Swelling studies revealed a decrease in water uptake of the NCC-reinforced chitosan films. Analyses of thermal properties showed no significant effect of NCC whereas X-ray diffraction studies confirmed the appearance of crystalline peaks in the nanocomposite films. Surface morphology of the films was investigated by scanning electron microscopy and it was found that NCC was dispersed homogenously into chitosan matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Chitosan as antimicrobial agent: applications and mode of action.
Rabea, E. I., Badawy, M. E.-T., Stevens, C. V., Smagghe, G., & Steurbaut, W. (2003) · Biomacromolecules · doi:10.1021/bm034130m · Cited by 3,123
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Beck-Candanedo, S., Roman, M., & Gray, D. G. (2005) · Biomacromolecules · doi:10.1021/bm049300p · Cited by 1,588
Chandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,462
Helicoidal self-ordering of cellulose microfibrils in aqueous suspension
Revol, J.-F., Bradford, H., Giasson, J., Marchessault, R. H., & Gray, D. G. (1992) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(05)80008-x · Cited by 1,250
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Effect of microcrystallite preparation conditions on the formation of colloid crystals of cellulose
DONG, X. M., REVOL, J.-F., & GRAY, D. G. (1998) · Cellulose · doi:10.1023/a:1009260511939 · Cited by 1,032
Preparation and Characterization of Chitosan-Based Nanocomposite Films with Antimicrobial Activity
Rhim, J.-W., Hong, S.-I., Park, H.-M., & Ng, P. K. W. (2006) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf060658h · Cited by 960
Cited by
Chitosan-based biodegradable functional films for food packaging applications
Priyadarshi, R., & Rhim, J.-W. (2020) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2020.102346 · Cited by 782
Cellulose reinforced polymer composites and nanocomposites: a critical review
Miao, C., & Hamad, W. Y. (2013) · Cellulose · doi:10.1007/s10570-013-0007-3 · Cited by 630
Shaghaleh, H., Xu, X., & Wang, S. (2018) · RSC Advances · doi:10.1039/c7ra11157f · Cited by 562
Nanocellulose in bio-based food packaging applications
Azeredo, H. M. C., Rosa, M. F., & Mattoso, L. H. C. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.03.013 · Cited by 544
H.P.S, A. K., Saurabh, C. K., A.S., A., Nurul Fazita, M. R., Syakir, M. I., Davoudpour, Y., Rafatullah, M., Abdullah, C. K., M. Haafiz, M. K., & Dungani, R. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.028 · Cited by 542
Nanocellulose in Thin Films, Coatings, and Plies for Packaging Applications: A Review
Hubbe, M. A., Ferrer, A., Tyagi, P., Yin, Y., Salas, C., Pal, L., & Rojas, O. J. (2017) · BioResources · doi:10.15376/biores.12.1.2143-2233 · Cited by 508
Review of nanocellulose for sustainable future materials
Kim, J.-H., Shim, B. S., Kim, H. S., Lee, Y.-J., Min, S.-K., Jang, D., Abas, Z., & Kim, J. (2015) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-015-0024-9 · Cited by 498
Kargarzadeh, H., Huang, J., Lin, N., Ahmad, I., Mariano, M., Dufresne, A., Thomas, S., & Gałęski, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.008 · Cited by 496
Salari, M., Sowti Khiabani, M., Rezaei Mokarram, R., Ghanbarzadeh, B., & Samadi Kafil, H. (2018) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.05.037 · Cited by 411
Choo, K., Ching, Y., Chuah, C., Julai, S., & Liou, N.-S. (2016) · Materials · doi:10.3390/ma9080644 · Cited by 404
Nanocellulose in packaging: Advances in barrier layer technologies
Ferrer, A., Pal, L., & Hubbe, M. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.012 · Cited by 382
Characterization and antimicrobial analysis of chitosan-based films
Leceta, I., Guerrero, P., Ibarburu, I., Dueñas, M. T., & de la Caba, K. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.01.022 · Cited by 378
Duan, C., Meng, X., Meng, J., Khan, M. I. H., Dai, L., Khan, A., An, X., Zhang, J., Huq, T., & Ni, Y. (2019) · Journal of Bioresources and Bioproducts · doi:10.21967/jbb.v4i1.189 · Cited by 345
Self-citationCharacterization of bionanocomposite films prepared with agar and paper-mulberry pulp nanocellulose
Reddy, J. P., & Rhim, J.-W. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.056 · Cited by 341
Nanotechnology-based approaches for food sensing and packaging applications
Mustafa, F., & Andreescu, S. (2020) · RSC Advances · doi:10.1039/d0ra01084g · Cited by 332
A critical review on cellulose: From fundamental to an approach on sensor technology
Ummartyotin, S., & Manuspiya, H. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.050 · Cited by 327
Chaichi, M., Hashemi, M., Badii, F., & Mohammadi, A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.062 · Cited by 323
Chitosan/pectin polyelectrolyte complex as a pH indicator
Maciel, V. B. V., Yoshida, C. M. P., & Franco, T. T. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.06.047 · Cited by 304
Green chitosan–carbon dots nanocomposite hydrogel film with superior properties
Konwar, A., Gogoi, N., Majumdar, G., & Chowdhury, D. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.08.021 · Cited by 281
Chitosan films and coatings prevent losses of fresh fruit nutritional quality: A review
Kerch, G. (2015) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2015.10.010 · Cited by 280
The antimicrobial, mechanical, physical and structural properties of chitosan–gallic acid films
Sun, X., Wang, Z., Kadouh, H., & Zhou, K. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2013.11.037 · Cited by 274
Functionalized Cellulose for Water Purification, Antimicrobial Applications, and Sensors
Bethke, K., Palantöken, S., Andrei, V., Roß, M., Raghuwanshi, V. S., Kettemann, F., Greis, K., Ingber, T. T. K., Stückrath, J. B., Valiyaveettil, S., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800409 · Cited by 269
Essawy, H. A., Ghazy, M. B. M., El-Hai, F. A., & Mohamed, M. F. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.071 · Cited by 268
Haghighi, H., Gullo, M., La China, S., Pfeifer, F., Siesler, H. W., Licciardello, F., & Pulvirenti, A. (2021) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.106454 · Cited by 258
Qasim, U., Osman, A. I., Al-Muhtaseb, A. H., Farrell, C., Al-Abri, M., Ali, M., Vo, D.-V. N., Jamil, F., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01090-x · Cited by 235
Recent trends in nanotechnology applications of bio-based packaging
Chausali, N., Saxena, J., & Prasad, R. (2022) · Journal of Agriculture and Food Research · doi:10.1016/j.jafr.2021.100257 · Cited by 233
Polyelectrolyte films based on chitosan/olive oil and reinforced with cellulose nanocrystals
Pereda, M., Dufresne, A., Aranguren, M. I., & Marcovich, N. E. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.10.046 · Cited by 226
Optimization of physical and mechanical properties for chitosan–nanocellulose biocomposites
Dehnad, D., Emam-Djomeh, Z., Mirzaei, H., Jafari, S.-M., & Dadashi, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.094 · Cited by 188
“Khan et al. (2012) reported that incorporation of even 1% (w/w) NCL with 5–10 nm width could significantly increase tensile modulus of CHT film, which was equal to 43% increase compared with control CHT film.”
ResultGreen synthesis of nanomaterials for smart biopolymer packaging: challenges and outlooks
Jafarzadeh, S., Nooshkam, M., Zargar, M., Garavand, F., Ghosh, S., Hadidi, M., & Forough, M. (2024) · Journal of Nanostructure in Chemistry · doi:10.1007/s40097-023-00527-3 · Cited by 180
Mechanical, barrier and morphological properties of starch nanocrystals-reinforced pea starch films
Li, X., Qiu, C., Ji, N., Sun, C., Xiong, L., & Sun, Q. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.040 · Cited by 177
Singh, S., Gaikwad, K. K., & Lee, Y. S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.10.057 · Cited by 171
Luzi, F., Fortunati, E., Puglia, D., Petrucci, R., Kenny, J. M., & Torre, L. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.08.016 · Cited by 128
Nanofluid to nanocomposite film: chitosan and cellulose-based edible packaging
Pinem, M. P., Wardhono, E. Y., Nadaud, F., Clausse, D., Saleh, K., & Guénin, E. (2020) · Nanomaterials · doi:10.3390/nano10040660 · Cited by 29
“We speculate that these results are the reason behind reported works that found that CNC is able to increase the tensile strength and other mechanical properties of composite films [47,48].”
ResultGrape Waste Materials—An Attractive Source for Developing Nanomaterials with Versatile Applications
Baroi, A. M., Sieniawska, E., Świątek, Ł., & Fierascu, I. (2023) · Nanomaterials · doi:10.3390/nano13050836 · Cited by 28
Metadata
- Authors
- Khan, A., Khan, R. A., Salmieri, S., Le Tien, C., Riedl, B., Bouchard, J., Chauve, G., Tan, V., Kamal, M. R., & Lacroix, M.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2012-11
- Volume
- 90
- Issue
- 4
- Pages
- 1601-1608
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W1978650595
- Cited by
- 677
- References
- 48
- FWCI
- 10.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.