The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Post-combustion CO2 capture with a commercial activated carbon: Comparison of different regeneration strategies
Open accessAbstract
A commercial activated carbon supplied by Norit, R2030CO2, was evaluated as CO 2 adsorbent under conditions relevant to post-combustion CO 2 capture (ambient pressure and diluted CO 2 ). It has been demonstrated that this carbon possesses sufficient CO 2 /N 2 selectivity in order to efficiently separate a binary mixture composed of 17% CO 2 in N 2 . Moreover, this carbon was easily completely regenerated and it did not show capacity decay after 10 consecutive cycles. Three different regeneration strategies were compared in a single-bed adsorption unit: temperature swing adsorption (TSA), vacuum swing adsorption (VSA) and a combination of them, vacuum and temperature swing adsorption (VTSA). Through a simple two step TSA cycle, CO 2 was concentrated from 17 to 43 vol%. For the single-bed cycle configurations, the productivity and CO 2 recovery followed the sequence: TSA −1 h −1 and a maximum CO 2 recovery of 97% were reached.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Adsorption and Adsorption Processes
Ruthven, D. M. (1984) · Medical Entomology and Zoology · Cited by 3,662
Principles of adsorption and adsorption processes
Klein, G. (1985) · Reactive Polymers, Ion Exchangers, Sorbents · doi:10.1016/0167-6989(85)90037-6 · Cited by 2,109
Adsorption Equilibrium of Methane, Carbon Dioxide, and Nitrogen on Zeolite 13X at High Pressures
Cavenati, S., Grande, C. A., & Rodrigues, A. E. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je0498917 · Cited by 1,147
Energy Technology Perspectives 2020
International Energy Agency (2020) · OECD eBooks · doi:10.1787/ab43a9a5-en · Cited by 1,062
High-Pressure Adsorption Equilibria of Methane and Carbon Dioxide on Several Activated Carbons
Himeno, S., Komatsu, T., & Fujita, S. (2005) · Journal of Chemical & Engineering Data · doi:10.1021/je049786x · Cited by 592
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566 · cited 2×
“Adsorption is a separation technology with potential to reduce the cost of post-combustion capture compared to amine scrubbing [3-5].”
BackgroundDeVault, D. (1943) · Journal of the American Chemical Society · doi:10.1021/ja01244a011 · Cited by 543
CO2 capture by adsorption with nitrogen enriched carbons
Plaza, M. G., Pevida, C., Arenillas, A., Rubiera, F., & Pis, J. J. (2007) · Fuel · doi:10.1016/j.fuel.2007.06.001 · Cited by 505
Self-citationChue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Surface modification of activated carbons for CO2 capture
Pevida, C., Plaza, M. G., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.05.239 · Cited by 468
Self-citation
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
“Physical Adsorbent Though carbonaceous adsorbents such as activated carbon (Plaza et al., 2010) have been widely used for CO2 capture due to their wide availability, low cost, high thermal stability and low sensitivity to moisture, their application is limited to treat high pressure gases.”
Insight into the adsorption kinetics models for the removal of contaminants from aqueous solutions
Tan, K. L., & Hameed, B. H. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2017.01.024 · Cited by 1,206
Biogas as a renewable energy fuel – A review of biogas upgrading, utilisation and storage
Ullah Khan, I., Hafiz Dzarfan Othman, M., Hashim, H., Matsuura, T., Ismail, A. F., Rezaei-DashtArzhandi, M., & Wan Azelee, I. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.035 · Cited by 775
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
Carbon Capture and Utilization Update
Al‐Mamoori, A., Krishnamurthy, A., Rownaghi, A. A., & Rezaei, F. (2017) · Energy Technology · doi:10.1002/ente.201600747 · Cited by 719
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Post-combustion carbon capture
Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110490 · Cited by 652
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Active chemisorption sites in functionalized ionic liquids for carbon capture
Cui, G., Wang, J., & Zhang, S. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00462d · Cited by 498
Biochar-based adsorbents for carbon dioxide capture: a critical review
Dissanayake, P. D., You, S., Igalavithana, A. D., Xia, Y., Bhatnagar, A., Gupta, S., Kua, H. W., Kim, S., Kwon, J.-H., Tsang, D. C. W., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109582 · Cited by 489
Mohamad Nor, N., Lau, L. C., Lee, K. T., & Mohamed, A. R. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.09.017 · Cited by 478
Songolzadeh, M., Soleimani, M., Takht Ravanchi, M., & Songolzadeh, R. (2014) · The Scientific World Journal · doi:10.1155/2014/828131 · Cited by 478
Hong, W. Y. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100044 · Cited by 455
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
Technologies for Biogas Upgrading to Biomethane: A Review
Adnan, A. I., Ong, M. Y., Nomanbhay, S., Chew, K. W., & Show, P. L. (2019) · Bioengineering · doi:10.3390/bioengineering6040092 · Cited by 378
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Sorption direct air capture with CO2 utilization
Jiang, L., Liu, W., Wang, R. Q., Gonzalez-Diaz, A., Rojas-Michaga, M. F., Michailos, S., Pourkashanian, M., Zhang, X. J., & Font-Palma, C. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101069 · Cited by 318
Ammendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Self-citationSustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Self-citationRegeneration of carbonaceous adsorbents. Part I: Thermal Regeneration
Salvador, F., Martin-Sanchez, N., Sanchez-Hernandez, R., Sanchez-Montero, M. J., & Izquierdo, C. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.02.045 · Cited by 267
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.165 · Cited by 209
CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
Boujibar, O., Souikny, A., Ghamouss, F., Achak, O., Dahbi, M., & Chafik, T. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.03.005 · Cited by 137
Effects of water vapour on CO2 capture with vacuum swing adsorption using activated carbon
Xu, D., Xiao, P., Zhang, J., Li, G., Xiao, G., Webley, P. A., & Zhai, Y. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.080 · Cited by 112
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Self-citationFixed bed adsorption as affected by thermodynamics and kinetics: yellow tuff for CO2 capture
Ammendola, P., Raganati, F., Chirone, R., & Miccio, F. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.06.075 · Cited by 88
Zhao, R., Liu, L., Zhao, L., Deng, S., Li, S., Zhang, Y., & Li, H. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.01.009 · Cited by 75
Karimi, M., C. Silva, J. A., Gonçalves, C. N. D. P., L. Diaz de Tuesta, J., Rodrigues, A. E., & Gomes, H. T. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00953 · Cited by 70
Karimi, M., Zafanelli, L. F. A. S., Almeida, J. P. P., Ströher, G. R., Rodrigues, A. E., & Silva, J. A. C. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104069 · Cited by 66
Plaza, M. G., & Rubiera, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.079 · Cited by 53
Self-citationGreen coffee based CO2 adsorbent with high performance in postcombustion conditions
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2015) · Fuel · doi:10.1016/j.fuel.2014.10.014 · Cited by 47
Self-citationRoberts, A. D., Lee, J.-S. M., Wong, S. Y., Li, X., & Zhang, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09078h · Cited by 36
Evaluation of the cyclic capacity of low-cost carbon adsorbents for post-combustion CO2 capture
Plaza, M. G., Pevida, C., Pis, J. J., & Rubiera, F. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.178 · Cited by 33
Self-citationCO2 removal using amine-functionalized kenaf in pressure swing adsorption system
Kamarudin, K. S. N., Zaini, N., & Khairuddin, N. E. A. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.12.040 · Cited by 31
Wawrzyńczak, D., Panowski, M., & Majchrzak-Kucęba, I. (2019) · Energy · doi:10.1016/j.energy.2019.05.068 · Cited by 30
Metadata
- Authors
- Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2010-09
- Volume
- 163
- Issue
- 1-2
- Pages
- 41-47
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2010718152
- Cited by
- 365
- References
- 36
- FWCI
- 26.16
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.