The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Influence of silica fume on properties of fresh and hardened ultra-high performance concrete based on alkali-activated slag
Abstract
Abstract Based on the principles of ultra-high performance concrete (UHPC) a Portland cement free, alkali-activated material was optimized in order to enhance strength and durability. The formulation is based on ground granulated blast furnace slag and as an activator a combination of potassium water-glass and potassium hydroxide was used. Furthermore, silica fume and metakaolin as inorganic fines were used to increase the packing density of the mixture. Quartz sand (0–2 mm) and quartz powder were added as aggregates. The results comprise an enhancement of the rheological properties by the stepwise increase of silica fume. A w/b ratio of less than 0.25 was realised using a certain mixing procedure with a high intensity mixer. The compressive strength reaches values comparable with the strength range of an UHPC. The already low capillary porosity could further be decreased by the substitution of slag with a small amount of metakaolin, which is leading to a higher polymerisation degree due to an incorporation of aluminium in the reaction products. The enhanced polymerisation degree was estimated by FTIR and XRD. Although no effective superplasticizer can be used in this high alkaline material, the low w/b ratio and a good workability can be achieved by using certain amounts of silica fume.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer Chemistry and Applications
Davidovits, J. (2008) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,692
Geopolymers and Related Alkali-Activated Materials
Provis, J. L., & Bernal, S. A. (2014) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070813-113515 · Cited by 1,597
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Influence of NaOH solution on the synthesis of fly ash geopolymer
Rattanasak, U., & Chindaprasirt, P. (2009) · Minerals Engineering · doi:10.1016/j.mineng.2009.03.022 · Cited by 939
The Laws of Proportioning Concrete
Fuller, W. B., & Thompson, S. E. (1907) · Transactions of the American Society of Civil Engineers · doi:10.1061/taceat.0001979 · Cited by 902
Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
Temuujin, J., van Riessen, A., & Williams, R. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.12.121 · Cited by 834
Oh, J. E., Monteiro, P. J. M., Jun, S. S., Choi, S., & Clark, S. M. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.010 · Cited by 507
(2005) · CRC Press eBooks · doi:10.1201/9781420028706 · Cited by 488
Fernández‐Jiménez, A., Puertas, F., Sobrados, I., & Sanz, J. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03481.x · Cited by 481
Bernal, S. A., de Gutierrez, R. M., Provis, J. L., & Rose, V. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.02.003 · Cited by 473
In Situ ATR-FTIR Study of the Early Stages of Fly Ash Geopolymer Gel Formation
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Langmuir · doi:10.1021/la701185g · Cited by 411
Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.084 · Cited by 363
The Role of Al in Cross‐Linking of Alkali‐Activated Slag Cements
Myers, R. J., Bernal, S. A., Gehman, J. D., van Deventer, J. S. J., & Provis, J. L. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13360 · Cited by 287
The effect of fiber properties on high performance alkali-activated slag/silica fume mortars
Aydın, S., & Baradan, B. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.080 · Cited by 275
"Ultra-High-Performance Concrete: Research, Development and Application in Europe"
Schmidt, M., & Fehling, E. (2005) · International Symposium on the Utilization of High-Strength/High-Performance Concrete · doi:10.14359/14460 · Cited by 263
Development of ultra-high-performance geopolymer concrete
Ambily, P. S., Ravisankar, K., Umarani, C., Dattatreya, J. K., & Iyer, N. R. (2014) · Magazine of Concrete Research · doi:10.1680/macr.13.00057 · Cited by 193
Autef, A., Joussein, E., Poulesquen, A., et al. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.07.024 · Cited by 131
White, C. E., Daemen, L. L., Hartl, M. A., & Page, K. L. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.08.006 · Cited by 88
Cited by
Geopolymers as an alternative to Portland cement: An overview
Singh, N. B., & Middendorf, B. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117455 · Cited by 817
Self-citationHan, Q., Gui, C., Xu, J., & Lacidogna, G. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.315 · Cited by 408
Liu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103665 · Cited by 351
Liu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Rheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 283
Metadata
- Authors
- Wetzel, A., & Middendorf, B.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 100
- Pages
- 53-59
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2923990112
- Cited by
- 286
- References
- 18
- FWCI
- 14.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.