The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Rheology of alkali-activated materials: A review
Abstract
Many alkali-activated materials (AAMs) exhibit poor workability in mixing owing to great viscosity of the paste and fast setting. Chemical admixtures commonly used in Portland cement-based materials, such as rheology control additives and superplasticizers, show lower efficiency in AAM systems. Understanding the rheological features of various AAMs and their control can lead to a valuable guidance for their application in large-scale, especially in the field of pumping and placement, grouting and 3D printing, etc. This paper aims to deliver a comprehensive review of the effects of composition factors including activators, precursors, admixtures, additions, aggregates and fibers on the rheology of AAMs, as well as models for describing their rheological behavior. The current progress has shown that the large knowledge gap needs substantial research from scientific mechanisms to robust formulations of paste, mortar and concrete to meet both workability and mechanical requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
A Mechanism for Non-Newtonian Flow in Suspensions of Rigid Spheres
Krieger, I. M., & Dougherty, T. J. (1959) · Transactions of the Society of Rheology · doi:10.1122/1.548848 · Cited by 3,402
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Self-citationAdvances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationKonsistenzmessungen von Gummi-Benzollösungen
Herschel, W. H., & Bulkley, R. (1926) · Kolloid-Zeitschrift · doi:10.1007/bf01432034 · Cited by 1,499
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Habert, G., d’Espinose de Lacaillerie, J. B., & Roussel, N. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.03.012 · Cited by 1,407
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
Self-citationShear thickening in colloidal dispersions
Wagner, N. J., & Brady, J. F. (2009) · Physics Today · doi:10.1063/1.3248476 · Cited by 994
Workability and strength of coarse high calcium fly ash geopolymer
Chindaprasirt, P., Chareerat, T., & Sirivivatnanon, V. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.11.002 · Cited by 863
Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 818
Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.021 · Cited by 806
Effect of constituents on rheological properties of fresh concrete-A review
Jiao, D., Shi, C., Yuan, Q., An, X., Liu, Y., & Li, H. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.07.016 · Cited by 583
Self-citationDrying and autogenous shrinkage of pastes and mortars with activated slag cement
Melo Neto, A. A., Cincotto, M. A., & Repette, W. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.11.002 · Cited by 578
Chindaprasirt, P., De Silva, P., Sagoe-Crentsil, K., & Hanjitsuwan, S. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6353-y · Cited by 539
Ghafari, E., Costa, H., Júlio, E., Portugal, A., & Durães, L. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.051 · Cited by 469
Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages
Lee, N. K., Jang, J. G., & Lee, H. K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.007 · Cited by 462
Understanding the rheology of concrete
Roussel, N. (2012) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857095282 · Cited by 461
Alkali-Activated Cements and Concretes
Shi, C., Roy, D. M., & Krivenko, P. V. (2003) · CRC Press eBooks · doi:10.1201/9781482266900 · Cited by 455
Self-citationYang, T., Zhu, H., Zhang, Z., Gao, X., Zhang, C., & Wu, Q. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.008 · Cited by 399
Self-citationPalacios, M., & Puertas, F. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.014 · Cited by 364
A physico-chemical basis for novel cementitious binders
Gartner, E. M., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.006 · Cited by 363
Liu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103665 · Cited by 351
Self-citationCharacteristics and cementitious properties of ladle slag fines from steel production
Shi, C. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00707-4 · Cited by 344
Self-citationChithra, S., Senthil Kumar, S. R. R., & Chinnaraju, K. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.119 · Cited by 328
Analytical models for estimating yield stress of high-performance pseudoplastic grout
Yahia, A., & Khayat, K. H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00476-8 · Cited by 321
Vance, K., Kumar, A., Sant, G., & Neithalath, N. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.07.007 · Cited by 321
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
Puertas, F., Varga, C., & Alonso, M. M. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.012 · Cited by 298
Zhang, Z., Zhu, Y., Yang, T., Li, L., Zhu, H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.147 · Cited by 296
Self-citationWetzel, A., & Middendorf, B. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.023 · Cited by 286
Liu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103670 · Cited by 286
Self-citationThe interrelationship between surface chemistry and rheology in alkali activated slag paste
Kashani, A., Provis, J. L., Qiao, G. G., & van Deventer, J. S. J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.127 · Cited by 268
Puertas, F., Santos, H., Palacios, M., & Mart�nez-Ram�rez, S. (2005) · Advances in Cement Research · doi:10.1680/adcr.17.2.77.65044 · Cited by 265
Alkali-activated slag concrete: Fresh and hardened behaviour
Puertas, F., González-Fonteboa, B., González-Taboada, I., Alonso, M. M., Torres-Carrasco, M., Rojo, G., & Martínez-Abella, F. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.10.003 · Cited by 242
Alghamdi, H., Nair, S. A. O., & Neithalath, N. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107634 · Cited by 227
G, I., Singh, B., Deshwal, S., & Bhattacharyya, S. K. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.007 · Cited by 225
Uchikawa, H., Sawaki, D., & Hanehara, S. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00021-6 · Cited by 214
Adsorption of superplasticizer admixtures on alkali-activated slag pastes
Palacios, M., Houst, Y. F., Bowen, P., & Puertas, F. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.05.005 · Cited by 214
Rheology of fly ash-based geopolymer: Effect of NaOH concentration
Rifaai, Y., Yahia, A., Mostafa, A., Aggoun, S., & Kadri, E.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.028 · Cited by 211
Molecular design of comb-shaped polycarboxylate dispersants for environmentally friendly concrete
Marchon, D., Sulser, U., Eberhardt, A., & Flatt, R. J. (2013) · Soft Matter · doi:10.1039/c3sm51030a · Cited by 195
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107826 · Cited by 192
The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes
Alrefaei, Y., Wang, Y.-S., & Dai, J.-G. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.027 · Cited by 190
Rheology and Setting of Alkali-Activated Slag Pastes and Mortars: Effect of Organic Admixture
(2008) · ACI Materials Journal · doi:10.14359/19754 · Cited by 189
Rheological properties and microstructure of binary waste red brick powder/metakaolin geopolymer
Rovnaník, P., Rovnaníková, P., Vyšvařil, M., Grzeszczyk, S., & Janowska-Renkas, E. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.150 · Cited by 182
Alkali activated fly ash: effect of admixtures on paste rheology
Criado, M., Palomo, A., Fernández‐Jiménez, A., et al. (2009) · Rheologica Acta · doi:10.1007/s00397-008-0345-5 · Cited by 180
Roy, D. M., Jiang, W., & Silsbee, M. R. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00406-3 · Cited by 180
Mechanical property and structure of alkali-activated fly ash and slag blends
Yang, T., Yao, X., Zhang, Z., & Wang, H. (2012) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2012.752621 · Cited by 178
Self-citationEffects of activator properties and GGBFS/FA ratio on the structural build-up and rheology of AAC
Dai, X., Aydın, S., Yardımcı, M. Y., Lesage, K., & De Schutter, G. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106253 · Cited by 173
Güllü, H., Cevik, A., Al-Ezzi, K. M. A., & Gülsan, M. E. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.140 · Cited by 171
The Role of Mathematical Modelling and Gel Chemistry in Advancing Geopolymer Technology
Provis, J. L., Duxson, P., Van Deventer, J. S. J., & Lukey, G. C. (2005) · Chemical Engineering Research and Design · doi:10.1205/cherd.04329 · Cited by 169
Structural Evolution during Geopolymerization from an Early Age to Consolidated Material
Steins, P., Poulesquen, A., Diat, O., & Frizon, F. (2012) · Langmuir · doi:10.1021/la300868v · Cited by 167
Toward an indexing approach to evaluate fly ashes for geopolymer manufacture
Zhang, Z., Provis, J. L., Zou, J., Reid, A., & Wang, H. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.04.007 · Cited by 161
Self-citationAlkali-activated mortars: Workability and rheological behaviour
Alonso, M. M., Gismera, S., Blanco, M. T., Lanzón, M., & Puertas, F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.020 · Cited by 160
Newlands, K. C., Foss, M., Matchei, T., Skibsted, J., & Macphee, D. E. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14716 · Cited by 158
Early reactivity of sodium silicate-activated slag pastes and its impact on rheological properties
Palacios, M., Díez, S. G., Alonso, M. M., de Lacaillerie, J.-B. D., Lothenbach, B., Favier, A. R., Brumaud, C., & Puertas, F. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106302 · Cited by 157
The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
Zhang, D., Wang, D., Lin, X., & Zhang, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.233 · Cited by 155
Properties and Durability of Alkali-Activated Slag Concrete
Douglas, E., Bilodeau, A., & Malhotra, V. M. (1992) · ACI Materials Journal · doi:10.14359/1832 · Cited by 154
Kinetic study on hydration of alkali-activated slag
Huanhai, Z., Xuequan, W., Xu, Z., & Mingshu, T. (1993) · Cement and Concrete Research · doi:10.1016/0008-8846(93)90062-e · Cited by 151
Revathi, T., & Jeyalakshmi, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120965 · Cited by 151
Williamson, T., & Juenger, M. C. G. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.02.008 · Cited by 139
Characteristics of the slags produced in the fusion of scrap steel by electric arc furnace
de Luxán, M. P., Sotolongo, R., Dorrego, F., & Herrero, E. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00253-7 · Cited by 137
Mechanical properties and compositional heterogeneities of fresh geopolymer pastes
Favier, A. R., Habert, G., de Lacaillerie, J.-B. D., & Roussel, N. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.02.001 · Cited by 135
The structure and dynamics of alkali silicate liquids: A view from NMR spectroscopy
Stebbins, J. F., Farnan, I., & Xue, X. (1992) · Chemical Geology · doi:10.1016/0009-2541(92)90066-e · Cited by 131
Rheology of geopolymer by DOE approach
Romagnoli, M., Leonelli, C., Kamse, E., & Gualtieri, M. L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.122 · Cited by 131
Aboulayt, A., Jaafri, R., Samouh, H., Idrissi, A. C. E., Rozière, E., Moussa, R., & Loukili, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.025 · Cited by 130
Xie, J., & Kayali, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.067 · Cited by 128
Zhang, D., Wang, D., Liu, Z., & Xie, F.-Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.205 · Cited by 123
Palacios, M., Alonso, M. M., Varga, C., & Puertas, F. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.08.010 · Cited by 120
Optimization approach of granulated blast furnace slag and metakaolin based geopolymer mortars
Hasnaoui, A., Ghorbel, E., & Wardeh, G. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.251 · Cited by 120
Alkali activated slag cements using waste glass as alternative activators. Rheological behaviour
Torres‐Carrasco, M., Rodríguez-Puertas, C., Alonso, M. M., & Puertas, F. (2015) · Boletín de la Sociedad Española de Cerámica y Vidrio · doi:10.1016/j.bsecv.2015.03.004 · Cited by 114
Effect of superplasticizers on properties of one-part Ca(OH)2/Na2SO4 activated geopolymer pastes
Alrefaei, Y., Wang, Y., Dai, J.-G., & Xu, Q. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117990 · Cited by 113
Wang, Y., Provis, J. L., & Dai, J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.07.011 · Cited by 109
Lei, L., & Chan, H.-K. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106150 · Cited by 106
Conte, T., & Plank, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.11.014 · Cited by 102
Suitability of commercial superplasticizers for one-part alkali-activated blast-furnace slag mortar
Luukkοnen, T., Abdollahnejad, Z., Ohenoja, K., Kinnunen, P., & Illikainen, M. (2019) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2019.1625827 · Cited by 100
Rheology behavior of one-part alkali activated slag/glass powder (AASG) pastes
Li, L., Lu, J., Zhang, B., & Poon, C. S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120381 · Cited by 90
Aktürk, B., KIZILKANAT, A. B., & Kabay, N. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.328 · Cited by 86
Kashani, A., Provis, J. L., Xu, J., Kilcullen, A. R., Qiao, G. G., & van Deventer, J. S. J. (2014) · Journal of Materials Science · doi:10.1007/s10853-013-7979-0 · Cited by 82
Lime as an Anti-Plasticizer for Self-Compacting Clay Concrete
Landrou, G., Brumaud, C., Winnefeld, F., Flatt, R. J., & Habert, G. (2016) · Materials · doi:10.3390/ma9050330 · Cited by 79
Effect of Plasticizer and Superplasticizer on Rheology of Fly-Ash-Based Geopolymer Concrete
Laskar, A. I., & Bhattacharjee, R. (2013) · ACI Materials Journal · doi:10.14359/51685902 · Cited by 64
Zhang, D., Zhao, K., Xie, F.-Z., Li, H., & Wang, D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120529 · Cited by 63
Choi, S. Y., & Lee, K.-M. (2019) · Materials · doi:10.3390/ma12132072 · Cited by 54
Evidence of a Fractal Percolating Network During Geopolymerization
Rouyer, J., & Poulesquen, A. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13480 · Cited by 49
Ye, H., Fu, C., & Lei, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118478 · Cited by 45
Palacios, M., Bowen, P., Kappl, M., Butt, H., Stuer, M., Pecharromán, C., Aschauer, U., & Puertas, F. (2012) · Materiales de Construcción · doi:10.3989/mc.2012.01612 · Cited by 44
Gonzalez, P. L. L., Novais, R. M., Labrincha, J. A., Blanpain, B., & Pontikes, Y. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.013 · Cited by 37
Xie, F.-Z., Liu, Z., Zhang, D., Wang, J., & Wang, D. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119488 · Cited by 36
Xu, L., Matalkah, F., Soroushian, P., Darsanasiri, N. D., Hamadneh, S., & Wu, W. (2017) · Advances in Cement Research · doi:10.1680/jadcr.16.00151 · Cited by 24
Santa, R. A. A. B., Kessler, J. C., Soares, C., & Riella, H. G. (2018) · Particuology · doi:10.1016/j.partic.2017.12.007 · Cited by 24
Tan, H., Zheng, X., Duan, C., & Xia, B. (2016) · Energies · doi:10.3390/en9100823 · Cited by 5
Cited by
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Self-citation
Metadata
- Authors
- Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 121
- Pages
- 104061
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3155711882
- Cited by
- 283
- References
- 92
- FWCI
- 20.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.