The DOI matches its Crossref record; 169 of the 169 references it cites were found in a registry or an index.
Failure mode and effect analysis using multi-criteria decision making methods: A systematic literature review
Abstract
Abstract Failure mode and effect analysis (FMEA) is a proactive reliability management technique extensively utilized in a variety of fields. To enhance the effectiveness of FMEA, a great many multi-criteria decision making (MCDM) methods have been applied for properly evaluating the risk of failure modes over the past two decades. However, there is a lack of study concerning systematic literature review and classification of the researches on this topic. This article aims to provide a comprehensive review of the FMEA studies using MCDM approaches for evaluation and prioritization of failure modes. To do so, a total of 169 journal papers extracted from the online database over the period of 1998–2018 were selected and reviewed. These publications were classified into 10 categories according to the used MCDM methods, and analyzed in regard to the risk factors, risk factor weighting methods, and risk assessment methods in FMEA. Furthermore, a bibliometric analysis was performed based on the frequency of MCDM methods, number of citations, year of publication, appeared journals, country of origin and application areas. This research supports academics and practitioners in effectively adopting MCDM methods to overcome the deficiencies of the traditional FMEA and provides an insight into its state-of-the-art.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Mirghafoori, S. H., Izadi, M. R., & Daei, A. (2018) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-171695 · Cited by 45
RetractedFailure Mode and Effect Analysis: FMEA From Theory to Execution
Schneider, H. (1996) · Technometrics · doi:10.1080/00401706.1996.10484424 · Cited by 1,493
Risk evaluation approaches in failure mode and effects analysis: A literature review
Liu, H.-C., Liu, L., & Liu, N. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.08.010 · Cited by 965
Self-citationFuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis
Bowles, J. B., & Peláez, C. E. (1995) · Reliability Engineering & System Safety · doi:10.1016/0951-8320(95)00068-d · Cited by 687
Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean
Wang, Y.-M., Chin, K.-S., Poon, G. K. K., & Yang, J.-B. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.11.028 · Cited by 630
Self-citationFuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP
Kutlu, A. C., & Ekmekçioğlu, M. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.06.044 · Cited by 594
Modified failure mode and effects analysis using approximate reasoning
Pillay, A., & Wang, J. (2003) · Reliability Engineering & System Safety · doi:10.1016/s0951-8320(02)00179-5 · Cited by 581
Seyed-Hosseini, S. M., Safaei, N., & Asgharpour, M. J. (2006) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2005.09.005 · Cited by 410
Liu, H.-C., Liu, L., Liu, N., & Mao, L.-X. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.05.031 · Cited by 388
Self-citationLiu, H.-C., You, J.-X., You, X.-Y., & Shan, M.-M. (2015) · Applied Soft Computing · doi:10.1016/j.asoc.2014.11.036 · Cited by 377
Self-citationFattahi, R., & Khalilzadeh, M. (2018) · Safety Science · doi:10.1016/j.ssci.2017.10.018 · Cited by 367
Mardani, A., Zavadskas, E. K., Khalifah, Z., Zakuan, N., Jusoh, A., Nor, K. M., & Khoshnoudi, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.053 · Cited by 359
Improving Risk Evaluation in FMEA With Cloud Model and Hierarchical TOPSIS Method
Liu, H.-C., Wang, L.-E., Li, Z., & Hu, Y.-P. (2019) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2018.2861719 · Cited by 351
Self-citationFailure mode and effects analysis using a group-based evidential reasoning approach
Chin, K.-S., Wang, Y.-M., Ka Kwai Poon, G., & Yang, J.-B. (2009) · Computers & Operations Research · doi:10.1016/j.cor.2008.05.002 · Cited by 336
Self-citationDong, Y., Zhang, H., & Herrera-Viedma, E. (2016) · Decision Support Systems · doi:10.1016/j.dss.2016.01.002 · Cited by 336
Fuzzy TOPSIS approach for failure mode, effects and criticality analysis
Braglia, M., Frosolini, M., & Montanari, R. (2003) · Quality and Reliability Engineering International · doi:10.1002/qre.528 · Cited by 297
Li, C.-C., Dong, Y., & Herrera, F. (2019) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2018.2857720 · Cited by 290
Tian, Z.-P., Wang, J.-Q., & Zhang, H.-Y. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.03.037 · Cited by 272
Failure mode and effects analysis using fuzzy evidential reasoning approach and grey theory
Liu, H.-C., Liu, L., Bian, Q.-H., Lin, Q.-L., Dong, N., & Xu, P.-C. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.09.110 · Cited by 269
Self-citationFuzzy FMEA with a guided rules reduction system for prioritization of failures
Tay, K. M., & Lim, C. P. (2006) · International Journal of Quality & Reliability Management · doi:10.1108/02656710610688202 · Cited by 250
Huang, J., Li, Z., & Liu, H.-C. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.06.014 · Cited by 250
Self-citationMAFMA: multi‐attribute failure mode analysis
Braglia, M. (2000) · International Journal of Quality & Reliability Management · doi:10.1108/02656710010353885 · Cited by 244
Failure mode and effects analysis using D numbers and grey relational projection method
Liu, H.-C., You, J.-X., Fan, X.-J., & Lin, Q.-L. (2014) · Expert Systems with Applications · doi:10.1016/j.eswa.2014.01.031 · Cited by 231
Self-citationA novel multiple-criteria decision-making-based FMEA model for risk assessment
Lo, H.-W., & Liou, J. J. H. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.09.020 · Cited by 231
Song, W., Ming, X., Wu, Z., & Zhu, B. (2014) · Quality and Reliability Engineering International · doi:10.1002/qre.1500 · Cited by 227
Criticality Assessment Models for Failure Mode Effects and Criticality Analysis Using Fuzzy Logic
Gargama, H., & Chaturvedi, S. K. (2011) · IEEE Transactions on Reliability · doi:10.1109/tr.2010.2103672 · Cited by 226
Failure mode and effects analysis by data envelopment analysis
Chin, K.-S., Wang, Y.-M., Poon, G. K. K., & Yang, J.-B. (2009) · Decision Support Systems · doi:10.1016/j.dss.2009.08.005 · Cited by 219
Self-citationYang, J., Huang, H.-Z., He, L.-P., Zhu, S., & Wen, D. (2011) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2011.06.014 · Cited by 214
A new approach for evaluation of risk priorities of failure modes in FMEA
Franceschini, F., & Galetto, M. (2001) · International Journal of Production Research · doi:10.1080/00207540110056162 · Cited by 214
Liu, H.-C., You, J.-X., & Duan, C.-Y. (2019) · International Journal of Production Economics · doi:10.1016/j.ijpe.2017.03.008 · Cited by 214
Self-citationMohsen, O., & Fereshteh, N. (2017) · Safety Science · doi:10.1016/j.ssci.2016.10.006 · Cited by 210
A combined multi-criteria approach to support FMECA analyses: A real-world case
Carpitella, S., Certa, A., Izquierdo, J., & Fata, C. M. L. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.09.017 · Cited by 208
Failure mode and effects analysis based on a novel fuzzy evidential method
Jiang, W., Xie, C., Zhuang, M., & Tang, Y. (2017) · Applied Soft Computing · doi:10.1016/j.asoc.2017.04.008 · Cited by 200
Failure mode and effects analysis using fuzzy method and grey theory
Chang, C., Wei, C., & Lee, Y. (1999) · Kybernetes · doi:10.1108/03684929910300295 · Cited by 198
Evaluating the risk of failure using the fuzzy OWA and DEMATEL method
Chang, K., & Cheng, C. (2009) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-009-0266-x · Cited by 198
Zhang, H., Dong, Y., Palomares-Carrascosa, I., & Zhou, H. (2019) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2869787 · Cited by 196
Yazdi, M., Daneshvar, S., & Setareh, H. (2017) · Safety Science · doi:10.1016/j.ssci.2017.06.009 · Cited by 192
Fuzzy and grey theories in failure mode and effect analysis for tanker equipment failure prediction
Zhou, Q., & Vinh Van, T. H. A. I. (2015) · Safety Science · doi:10.1016/j.ssci.2015.11.013 · Cited by 191
Risk prioritization in failure mode and effects analysis under uncertainty
Zhang, Z., & Chu, X. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.06.046 · Cited by 190
Wang, L.-E., Liu, H.-C., & Quan, M.-Y. (2016) · Computers & Industrial Engineering · doi:10.1016/j.cie.2016.11.003 · Cited by 190
Self-citationRisk evaluation of green components to hazardous substance using FMEA and FAHP
Hu, A. H., Hsu, C.-W., Kuo, T.-C., & Wu, W.-C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.08.031 · Cited by 189
Identifying and evaluating enterprise architecture risks using FMEA and fuzzy VIKOR
Safari, H., Faraji, Z., & Majidian, S. (2016) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0880-0 · Cited by 188
Zhao, H., You, J.-X., & Liu, H.-C. (2017) · Soft Computing · doi:10.1007/s00500-016-2118-x · Cited by 186
Self-citationEvaluating the risk of failure modes with extended MULTIMOORA method under fuzzy environment
Liu, H.-C., Fan, X.-J., Li, P., & Chen, Y.-Z. (2014) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2014.04.011 · Cited by 185
Self-citationFailure mode and effects analysis based on D numbers and TOPSIS
Bian, T., Zheng, H., Yin, L., & Deng, Y. (2018) · Quality and Reliability Engineering International · doi:10.1002/qre.2268 · Cited by 185
A risk evaluation and prioritization method for FMEA with prospect theory and Choquet integral
Wang, W., Liu, X., Qin, Y., & Fu, Y. (2018) · Safety Science · doi:10.1016/j.ssci.2018.08.009 · Cited by 177
Failure Mode and Effect Analysis Using Cloud Model Theory and PROMETHEE Method
Liu, H.-C., Li, Z., Song, W., & Su, Q. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2754642 · Cited by 175
Self-citationA risk assessment methodology using intuitionistic fuzzy set in FMEA
Chang, K.-H., & Cheng, C.-H. (2010) · International Journal of Systems Science · doi:10.1080/00207720903353633 · Cited by 169
Liu, H.-C., You, J.-X., Li, P., & Su, Q. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2016.2570567 · Cited by 169
Self-citationVahdani, B., Salimi, M., & Charkhchian, M. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6466-3 · Cited by 165
FMEA Using Uncertainty Theories and MCDM Methods
Liu, H.-C. (2016) · Springer eBooks · doi:10.1007/978-981-10-1466-6 · Cited by 164
Self-citationRisk analysis using FMEA: Fuzzy similarity value and possibility theory based approach
Mandal, S., & Maiti, J. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.10.058 · Cited by 163
Certa, A., Hopps, F., Inghilleri, R., & Fata, C. M. L. (2016) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2016.10.018 · Cited by 160
Failure mode and effects analysis using intuitionistic fuzzy hybrid TOPSIS approach
Liu, H., You, J., Shan, M., & Shao, L. (2014) · Soft Computing · doi:10.1007/s00500-014-1321-x · Cited by 156
Self-citationMulti-criteria decision making approach in E-learning: A systematic review and classification
Zare, M., Pahl, C., Rahnama, H., Nilashi, M., Mardani, A., Ibrahim, O., & Ahmadi, H. (2016) · Applied Soft Computing · doi:10.1016/j.asoc.2016.04.020 · Cited by 156
Nie, R., Tian, Z., Wang, X., Wang, J., & Wang, T. (2018) · Knowledge-Based Systems · doi:10.1016/j.knosys.2018.05.030 · Cited by 156
Geum, Y., Cho, Y., & Park, Y. (2011) · Mathematical and Computer Modelling · doi:10.1016/j.mcm.2011.07.042 · Cited by 155
Failure mode and effects analysis using grey theory
Chang, C., Liu, P., & Wei, C. (2001) · Integrated Manufacturing Systems · doi:10.1108/09576060110391174 · Cited by 155
ANP/RPN: a multi criteria evaluation of the Risk Priority Number
Zammori, F., & Gabbrielli, R. (2011) · Quality and Reliability Engineering International · doi:10.1002/qre.1217 · Cited by 153
Liu, H., Li, P., You, J., & Chen, Y.-Z. (2014) · Quality and Reliability Engineering International · doi:10.1002/qre.1633 · Cited by 152
Self-citationAn integrated structural framework to cost-based FMECA: The priority-cost FMECA
Carmignani, G. (2009) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2008.09.009 · Cited by 150
A fuzzy data envelopment analysis approach for FMEA
Garcia, P. A. D. A., Schirru, R., & Melo, P. F. F. E. (2005) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2005.03.016 · Cited by 146
A novel efficient approach for DFMEA combining 2-tuple and the OWA operator
Chang, K., & Wen, T.-C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.07.026 · Cited by 146
A comprehensive fuzzy risk-based maintenance framework for prioritization of medical devices
Jamshidi, A., Rahimi, S. A., Aït-Kadi, D., & Ruiz, A. B. (2015) · Applied Soft Computing · doi:10.1016/j.asoc.2015.03.054 · Cited by 143
Fuzzy linear programming models for new product design using QFD with FMEA
Chen, L., & Ko, W.-C. (2007) · Applied Mathematical Modelling · doi:10.1016/j.apm.2007.11.029 · Cited by 142
Su, X., Deng, Y., Mahadevan, S., & Bao, Q. (2012) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2012.07.009 · Cited by 138
Liu, H., Liu, L., & Li, P. (2013) · International Journal of Systems Science · doi:10.1080/00207721.2012.760669 · Cited by 136
Self-citationYousefı, S., Alizadeh, A., Hayati, J., & Baghery, M. (2017) · Safety Science · doi:10.1016/j.ssci.2017.10.015 · Cited by 135
Chang, K., Chang, Y.-C., & Tsai, I.-T. (2013) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2013.02.020 · Cited by 133
Zhang, H., Dong, Y., & Chen, X. (2017) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2017.2694429 · Cited by 131
Self-citationLolli, F., Ishizaka, A., Gamberini, R., Rimini, B., & Messori, M. (2015) · Expert Systems with Applications · doi:10.1016/j.eswa.2015.04.028 · Cited by 129
Certa, A., Enea, M., Galante, G. M., & Fata, C. M. L. (2017) · Computers & Industrial Engineering · doi:10.1016/j.cie.2017.04.018 · Cited by 129
Liu, H., You, J., Chen, S., & Chen, Y.-Z. (2016) · IIE Transactions · doi:10.1080/0740817x.2016.1172742 · Cited by 124
Self-citationLiu, H., You, J., Lin, Q., & Li, H. (2014) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2014.900865 · Cited by 123
Self-citationFailure modes and effects analysis using integrated weight-based fuzzy TOPSIS
Song, W., Ming, X., Wu, Z., & Zhu, B. (2013) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2013.785027 · Cited by 122
Improving risk evaluation in FMEA with a hybrid multiple criteria decision making method
Liu, H., You, J., Ding, X., & Su, Q. (2015) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-10-2013-0169 · Cited by 121
Self-citationRisk prioritization in Failure Mode and Effects Analysis using interval type-2 fuzzy sets
Bozdag, E., Asan, U., Soyer, A., & Serdarasan, Ş. (2015) · Expert Systems with Applications · doi:10.1016/j.eswa.2015.01.015 · Cited by 121
Evaluate the orderings of risk for failure problems using a more general RPN methodology
Chang, K. (2009) · Microelectronics Reliability · doi:10.1016/j.microrel.2009.07.057 · Cited by 117
FMEA Using Uncertainty Theories and MCDM Methods
Liu, H. (2016) · Springer eBooks · doi:10.1007/978-981-10-1466-6_2 · Cited by 117
Self-citationFailure Mode and Effects Analysis by Using the House of Reliability-Based Rough VIKOR Approach
Wang, Z., Gao, J., Wang, R., Chen, K., Gao, Z.-Y., & Wei, Z. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2778316 · Cited by 110
Liu, H., You, X., Tsung, F., & Ji, P. (2018) · Quality Engineering · doi:10.1080/08982112.2018.1448089 · Cited by 110
Self-citationA model for failure mode and effects analysis based on intuitionistic fuzzy approach
Tooranloo, . S., & Ayatollah, A. S. (2016) · Applied Soft Computing · doi:10.1016/j.asoc.2016.07.047 · Cited by 109
Applying DEA to enhance assessment capability of FMEA
Chang, D., & Sun, K.-L. (2009) · International Journal of Quality & Reliability Management · doi:10.1108/02656710910966165 · Cited by 108
Liu, H., You, J., & You, X. (2014) · Computers & Industrial Engineering · doi:10.1016/j.cie.2014.07.018 · Cited by 106
Self-citationFuzzy approaches to quality function deployment for new product design
Chen, L., & Ko, W.-C. (2008) · Fuzzy Sets and Systems · doi:10.1016/j.fss.2008.12.003 · Cited by 99
Selim, H., Avcı, M. G., & Balaman, Ş. Y. (2015) · Quality and Reliability Engineering International · doi:10.1002/qre.1791 · Cited by 95
Failure mode and effect analysis with extended grey relational analysis method in cloud setting
Liu, H., Wang, L., You, X., & Wu, S. (2017) · Total Quality Management & Business Excellence · doi:10.1080/14783363.2017.1337506 · Cited by 94
Self-citationYazdi, M. (2018) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-018-0496-2 · Cited by 94
Risk evaluation in failure mode and effects analysis using fuzzy digraph and matrix approach
Liu, H., Chen, Y.-Z., You, J., & Li, H. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0915-6 · Cited by 91
Self-citationBaghery, M., Yousefı, S., & Rezaee, M. J. (2016) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-016-1214-1 · Cited by 91
Jiang, W. R., Xie, C., Wei, B., & Zhou, D. (2016) · Advances in Mechanical Engineering · doi:10.1177/1687814016644579 · Cited by 89
Liu, H., Hu, Y., Jing-jing, W., & Sun, M. (2018) · IEEE Transactions on Reliability · doi:10.1109/tr.2018.2866029 · Cited by 85
Self-citationUtility Priority Number Evaluation for FMEA
Chen, J. (2007) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-007-9060-2 · Cited by 84
Fuzzy based failure modes and effect analysis for yacht system design
Helvacıoğlu, Ş., & Özen, E. (2014) · Ocean Engineering · doi:10.1016/j.oceaneng.2013.12.015 · Cited by 82
Cost‐oriented failure mode and effects analysis
von Ahsen, A. (2008) · International Journal of Quality & Reliability Management · doi:10.1108/02656710810873871 · Cited by 82
Applying the concept of exponential approach to enhance the assessment capability of FMEA
Chang, K.-H., Chang, Y.-C., & Lai, P.-T. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-013-0747-9 · Cited by 81
Hu, Y., You, X., Wang, L., & Liu, H. (2018) · Soft Computing · doi:10.1007/s00500-018-3480-7 · Cited by 79
Self-citationNew Failure Mode and Effects Analysis: An Evidential Downscaling Method
Du, Y., Lu, X., Su, X., Hu, Y. Q., & Deng, Y. (2014) · Quality and Reliability Engineering International · doi:10.1002/qre.1753 · Cited by 76
Integrating TOPSIS and DEMATEL Methods to Rank the Risk of Failure of FMEA
Chang, K., Chang, Y.-C., & Lee, Y.-T. (2014) · International Journal of Information Technology & Decision Making · doi:10.1142/s0219622014500758 · Cited by 76
Multi criteria FMECA for coal-fired thermal power plants using COPRAS-G
Adhikary, D. D., Bose, G. K., Bose, D., & Mitra, S. (2014) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-04-2013-0068 · Cited by 74
Emovon, I., Norman, R. A., Alan, J. M., & Pazouki, K. (2015) · Ocean Engineering · doi:10.1016/j.oceaneng.2015.06.005 · Cited by 68
Total efficient risk priority number (TERPN): a new method for risk assessment
Bona, G. D., Silvestri, A., Forcina, A., & Petrillo, A. (2017) · Journal of Risk Research · doi:10.1080/13669877.2017.1307260 · Cited by 68
Kirkire, M. S., Rane, S. B., & Jadhav, J. R. (2015) · Journal of industrial engineering international · doi:10.1007/s40092-015-0113-y · Cited by 67
Liu, H., You, J., Shan, M., & Su, Q. (2017) · Total Quality Management & Business Excellence · doi:10.1080/14783363.2017.1317585 · Cited by 65
Self-citationBraglia, M., Fantoni, G., & Frosolini, M. (2007) · International Journal of Quality & Reliability Management · doi:10.1108/02656710710740572 · Cited by 63
A new risk prioritization model for failure mode and effects analysis
Anes, V., Henriques, E. M. P., Freitas, M., & Reis, L. G. (2018) · Quality and Reliability Engineering International · doi:10.1002/qre.2269 · Cited by 63
Evaluating knowledge management failure factors using intuitionistic fuzzy FMEA approach
Tooranloo, . S., Ayatollah, A. S., & Alboghobish, S. (2018) · Knowledge and Information Systems · doi:10.1007/s10115-018-1172-3 · Cited by 63
Wang, Z., Gao, J., Wang, R., Chen, K., Gao, Z.-Y., & Jiang, Y. L. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.06.015 · Cited by 63
A new fuzzy methodology-based structured framework for RAM and risk analysis
Panchal, D., Singh, A. K., Chatterjee, P., Zavadskas, E. K., & Keshavarz-Ghorabaee, M. (2019) · Applied Soft Computing · doi:10.1016/j.asoc.2018.10.033 · Cited by 61
Rahimi, S. A., Jamshidi, A., Aït-Kadi, D., & Ruiz, A. B. (2013) · Quality and Reliability Engineering International · doi:10.1002/qre.1619 · Cited by 60
Failure Mode and Effect Analysis using Soft Set Theory and COPRAS Method
Wang, Z.-L., You, J., Liu, H., & Wu, S. (2017) · International Journal of Computational Intelligence Systems · doi:10.2991/ijcis.2017.10.1.67 · Cited by 60
Self-citationAssessing information security risk for an evolving smart city based on fuzzy and grey FMEA
Li, X., Li, H., Sun, B., & Wang, F. (2018) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-172097 · Cited by 60
An improved FMEA method based on the linguistic weighted geometric operator and fuzzy priority
Zhou, Y., Xia, J., Zhong, Y., & Pang, J. (2016) · Quality Engineering · doi:10.1080/08982112.2015.1132320 · Cited by 59
Extended FMEA for Sustainable Manufacturing: An Empirical Study in the Non-Woven Fabrics Industry
Nguyễn, T. L., Shu, M., & Hsu, B. (2016) · Sustainability · doi:10.3390/su8090939 · Cited by 59
Integrated framework to optimize RAM and cost decisions in a process plant
Sharma, R. K., & Sharma, P. (2012) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2012.04.013 · Cited by 58
Baynal, K., Sarı, T., & Akpinar, B. (2018) · Advances in Production Engineering & Management · doi:10.14743/apem2018.1.274 · Cited by 58
Identifying and managing failures in stone processing industry using cost-based FMEA
Rezaee, M. J., Salimi, A., & Yousefı, S. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9019-0 · Cited by 56
Generalized multi-attribute failure mode analysis
Chang, K. (2015) · Neurocomputing · doi:10.1016/j.neucom.2015.10.039 · Cited by 55
A new fuzzy approach to identify the critical risk factors in maintenance management
Nazeri, A., & Naderikia, R. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0222-4 · Cited by 53
Deng, X., & Jiang, W. R. (2017) · Sensors · doi:10.3390/s17092086 · Cited by 53
Guo, J. J. (2015) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/ifs-151809 · Cited by 49
Ko, W.-C. (2012) · Computers & Industrial Engineering · doi:10.1016/j.cie.2012.11.016 · Cited by 49
Gupta, G., & Mishra, R. P. (2016) · Quality and Reliability Engineering International · doi:10.1002/qre.2011 · Cited by 49
Can, G. F. (2018) · Human Factors and Ergonomics in Manufacturing & Service Industries · doi:10.1002/hfm.20729 · Cited by 49
An integrated framework for mechatronics based product development in a fuzzy environment
Parameshwaran, R., Baskar, C., & Karthik, T. (2014) · Applied Soft Computing · doi:10.1016/j.asoc.2014.11.013 · Cited by 47
Sakthivel, G., Saravanakumar, D., & Muthuramalingam, T. (2018) · International Journal of Productivity and Quality Management · doi:10.1504/ijpqm.2018.10014011 · Cited by 46
Comprehensive fuzzy FMEA model: a case study of ERP implementation risks
Baykasoğlu, A., & Gölcük, İ. (2017) · Operational Research · doi:10.1007/s12351-017-0338-1 · Cited by 45
AMWRPN: Ambiguity Measure Weighted Risk Priority Number Model for Failure Mode and Effects Analysis
Tang, Y., Zhou, D., & Chan, F. T. S. (2018) · IEEE Access · doi:10.1109/access.2018.2836139 · Cited by 45
Fuzzy based risk prioritisation in an auto LPG dispensing station
Kumar, A. M., Rajakarunakaran, S., Pitchipoo, P., & Vimalesan, R. (2017) · Safety Science · doi:10.1016/j.ssci.2017.09.011 · Cited by 42
Multi-factor failure mode critically analysis using TOPSIS
Sachdeva, A. K., Kumar, D., & Kumar, P. (2009) · Cited by 41
Failure mode and effect analysis using fuzzy analytic hierarchy process
Ilangkumaran, M., Shanmugam, P., Sakthivel, G., & Visagavel, K. (2014) · International Journal of Productivity and Quality Management · doi:10.1504/ijpqm.2014.064807 · Cited by 40
A Fuzzy Hybrid Approach for Fuzzy Process FMEA: An Application to a Spindle Manufacturing Process
Ekmekçioğlu, M., & Kutlu, A. C. (2012) · International Journal of Computational Intelligence Systems · doi:10.1080/18756891.2012.718104 · Cited by 39
An Evidential Failure Mode and Effects Analysis Using Linguistic Terms
Li, Z., Xiao, F., Fei, L., Mahadevan, S., & Deng, Y. (2016) · Quality and Reliability Engineering International · doi:10.1002/qre.2075 · Cited by 39
Failure mode and effects analysis using a fuzzy-TOPSIS method: a case study of subsea control module
Kolios, A., Umofia, A., & Shafiee, M. (2017) · International Journal of Multicriteria Decision Making · doi:10.1504/ijmcdm.2017.085154 · Cited by 39
Modeling system behavior for risk and reliability analysis using KBARM
Sharma, R. K., Kumar, D., & Kumar, P. (2007) · Quality and Reliability Engineering International · doi:10.1002/qre.849 · Cited by 38
Risk analysis for clean and sustainable production in a urea fertilizer industry
Panchal, D., Mangla, S. K., Tyagi, M., & Ram, M. (2018) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-03-2017-0038 · Cited by 38
Applying UGF Concept to Enhance the Assessment Capability of FMEA
Khorshidi, H. A., Gunawan, I., & Ibrahim, M. Y. (2015) · Quality and Reliability Engineering International · doi:10.1002/qre.1817 · Cited by 37
A new method in failure mode and effects analysis based on evidential reasoning
Du, Y., Mo, H., Deng, X., Sadiq, R., & Deng, Y. (2014) · International Journal of Systems Assurance Engineering and Management · doi:10.1007/s13198-014-0218-5 · Cited by 37
A new method to evaluate risk in failure mode and effects analysis under fuzzy information
Huang, Z., Jiang, W. R., & Tang, Y. (2017) · Soft Computing · doi:10.1007/s00500-017-2664-x · Cited by 37
Assessment of structural risks using the fuzzy weighted Euclidean FMEA and block diagram analysis
Park, J., Park, C., & Ahn, S. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1844-x · Cited by 37
An improved FMECA for feed system of CNC machining center based on ICR and DEMATEL method
Wang, X., Zhang, Y., & Shen, G. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7551-y · Cited by 36
A Modified Model of Failure Mode and Effects Analysis Based on Generalized Evidence Theory
Zhou, D., Tang, Y., & Wen, J. (2016) · Mathematical Problems in Engineering · doi:10.1155/2016/4512383 · Cited by 36
Failure Mode and Effects Analysis based on Z-numbers
Jiang, W. R., Xie, C., Wei, B., & Tang, Y. (2017) · Intelligent Automation & Soft Computing · doi:10.1080/10798587.2017.1327158 · Cited by 35
FMECA-based maintenance planning through COPRAS-G and PSI
Pancholi, N., & Bhatt, M. G. (2018) · Journal of Quality in Maintenance Engineering · doi:10.1108/jqme-03-2017-0015 · Cited by 35
Chang, K., Wen, T.-C., & Chung, H.-Y. (2018) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-17594 · Cited by 35
Mahmoudi, M., Mahdiraji, H. A., Jafarnejad, A., & Safari, H. (2019) · Kybernetes · doi:10.1108/k-08-2018-0417 · Cited by 35
Improving risk assessment for customer-oriented FMEA
Koomsap, P., & Charoenchokdilok, T. (2016) · Total Quality Management & Business Excellence · doi:10.1080/14783363.2016.1274229 · Cited by 34
Identification and Prioritisation of Risk Factors in R&D Projects Based on an R&D Process Model
Shin, J., Lee, S., & Yoon, B. (2018) · Sustainability · doi:10.3390/su10040972 · Cited by 32
Qualitative and quantitative approaches to analyse reliability of a mechatronic system: a case
Sharma, R. K., & Sharma, P. (2015) · Journal of industrial engineering international · doi:10.1007/s40092-015-0098-6 · Cited by 31
Prioritization of Corrective Actions from Utility Viewpoint in FMEA Application
Chen, J. (2016) · Quality and Reliability Engineering International · doi:10.1002/qre.2064 · Cited by 31
Tooranloo, . S., & Ayatollah, A. S. (2016) · International Journal of Fuzzy Systems · doi:10.1007/s40815-016-0265-y · Cited by 31
Zhou, X., & Tang, Y. (2018) · Entropy · doi:10.3390/e20110864 · Cited by 31
A novel general risk assessment method using the soft TOPSIS approach
Chang, K. (2015) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2015.1070375 · Cited by 30
A Novel Approach for Evaluating the Risk of Health Care Failure Modes
Chang, D. S., Chung, J.-H., Sun, K.-L., & Yang, F. (2012) · Journal of Medical Systems · doi:10.1007/s10916-012-9868-5 · Cited by 29
A weight restricted DEA model for FMEA risk prioritization
Garcia, P. A. D. A., Leal, I. C., & Oliveira, M. A. (2012) · Production · doi:10.1590/s0103-65132012005000092 · Cited by 27
Assessing risk through composite FMEA with pairwise matrix and Markov chains
Brun, A., & Savino, M. M. (2018) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-04-2017-0080 · Cited by 26
A Grey Theory Based Approach to Big Data Risk Management Using FMEA
Silva, M. M., Poleto, T., Silva, L. C. E., de Gusmão, A. P. H., & Costa, A. P. C. S. (2016) · Mathematical Problems in Engineering · doi:10.1155/2016/9175418 · Cited by 25
GROUP-BASED FAILURE EFFECTS ANALYSIS
Jenab, K., & Dhillon, B. S. (2005) · International Journal of Reliability Quality and Safety Engineering · doi:10.1142/s0218539305001835 · Cited by 23
Tsai, T., & Yeh, J.-H. (2015) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/ifs-151556 · Cited by 21
New Failure Mode and Effects Analysis based on D Numbers Downscaling Method
Liu, B., Hu, Y. Q., & Deng, Y. (2018) · International Journal of Computers Communications & Control · doi:10.15837/ijccc.2018.2.2990 · Cited by 20
Hajighasemi, Z., & Mousavi, S. M. (2018) · viXra · doi:10.22111/ijfs.2018.3583 · Cited by 18
Integrated hazard and operability study using fuzzy linguistics approach in petrochemical industry
Ilangkumaran, M., & Thamizhselvan, P. (2010) · International Journal of Quality & Reliability Management · doi:10.1108/02656711011043526 · Cited by 17
A fuzzy linear programming model for risk evaluation in failure mode and effects analysis
Hadi‐Vencheh, A., Hejazi, S., & Eslaminasab, Z. (2012) · Neural Computing and Applications · doi:10.1007/s00521-012-0874-9 · Cited by 17
A stochastic approach for failure mode and effect analysis
Delice, E. K., & Can, G. F. (2017) · RAIRO - Operations Research · doi:10.1051/ro/2017010 · Cited by 17
A Modified Method for Risk Evaluation in Failure Mode and Effects Analysis
Shi, J., Wang, Y., Jin, H.-H., Fan, S., Ma, Q., & Zhou, M. (2016) · Tamkang University Institutional Repository (TKUIR) · doi:10.6180/jase.2016.19.2.08 · Cited by 12
Self-citationDevelopment of failure mode and effects analysis using fuzzy analytical network process
Mirzaei, S., & Darestani, S. A. (2016) · International Journal of Productivity and Quality Management · doi:10.1504/ijpqm.2016.074461 · Cited by 10
Fuzzy risk assessment for electro-optical target tracker
Roy, S., Sarkar, A. K., & Mahanty, B. (2016) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-03-2015-0034 · Cited by 8
-, X. W., -, F. L., & -, Z. W. (2012) · Journal of Convergence Information Technology · doi:10.4156/jcit.vol7.issue23.34 · Cited by 2
Du, Y. (2014) · Journal of Information and Computational Science · doi:10.12733/jics20103022 · Cited by 2
Cited by
An integrated approach for fuzzy failure modes and effects analysis using fuzzy AHP and fuzzy MAIRCA
Boral, S., Howard, I., Chaturvedi, S. K., McKee, K., & Naikan, V. N. A. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.104195 · Cited by 215
Ervural, B., & Ayaz, H. I. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107525 · Cited by 91
Hybrid Intelligence Failure Analysis for Industry 4.0: A Literature Review and Future Prospective
Mokhtarzadeh, M., Rodríguez-Echeverría, J., Semanjski, I., & Gautama, S. (2025) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02376-5 · Cited by 35
A Concept of Risk Prioritization in FMEA Analysis for Fluid Power Systems
Fabis-Domagala, J., Domagala, M., & Momeni, H. (2021) · Energies · doi:10.3390/en14206482 · Cited by 31
Aleksić, A., Tadić, D., Komatina, N., & Nestić, S. (2025) · Mathematics · doi:10.3390/math13132216 · Cited by 11
Metadata
- Authors
- Liu, H.-C., Chen, X.-Q., Duan, C.-Y., & Wang, Y.-M.
- Venue
- Computers & Industrial Engineering
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 135
- Pages
- 881-897
- ISSN
- 0360-8352 (ISSN-L)
- OpenAlex
- W2955438921
- Cited by
- 262
- References
- 169
- FWCI
- 7.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.