The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Insight into biomass pyrolysis mechanism based on cellulose, hemicellulose, and lignin: Evolution of volatiles and kinetics, elucidation of reaction pathways, and characterization of gas, biochar and bio‐oil
Open accessAbstract
Pyrolysis is the first step of gasification and combustion. The pyrolysis process of biomass is complicated, which is generally considered to consist of the pyrolysis of the three major components (i.e., cellulose, hemicellulose, and lignin). Understanding the pyrolysis behavior and product of each component holds a key to understanding the biomass pyrolysis mechanism. In this work, the pyrolysis behavior, pyrolysis kinetics, volatile evolution, and product characterization of the three major components are investigated. Results showed that pyrolysis characteristics and thermal stability of the three components were closely related to their unique chemical structures. During pyrolysis, the main pyrolytic volatiles of hemicellulose appeared first, followed by cellulose and then lignin volatiles in the 3D FTIR spectra. In term of pyrolysis products, gases were generated by the cracking of specific functional groups. Hemicellulose had the highest CO2 yield, whereas lignin had the highest CH4 yield due to the aromatic rings and methoxy groups in lignin structure. Whereas cellulose demonstrated the highest CO yield at high temperatures (above 550 °C). With increasing temperature, the carbon structures of carboxylic-C and O-alkyl-C in biochar decreased, while aryl-C was enhanced. This was due to the deoxygenation reactions such as dehydroxylation, decarboxylation, decarbonylation, and demethoxylation, resulting in a reduction in the number of oxygen-containing functional groups (such as –OH, –C=O, –COOH, and –OCH3), as well as the polycondensation reactions that formed more polycyclic aromatic hydrocarbon units during pyrolysis. The major components of cellulose bio-oil included anhydrosugars and furans. Whereas the bio-oils derived from hemicellulose and lignin showed the highest relative content of acids and phenols, respectively. Based on this analysis, the thermal decomposition pathways of cellulose, hemicellulose, and lignin were proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Collard, F.-X., & Blin, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.06.013 · Cited by 1,905
The mechanism for thermal decomposition of cellulose and its main products
Shen, D. K., & Gu, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.06.095 · Cited by 994
Stefanidis, S. D., Kalogiannis, K. G., Iliopoulou, E. F., Michailof, C. M., Pilavachi, P. A., & Lappas, A. A. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.10.013 · Cited by 775
Ma, Z., Chen, D., Gu, J., Bao, B., & Zhang, Q. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.09.074 · Cited by 708
Self-citationProduction of monomeric phenols by thermochemical conversion of biomass: a review
Amen-Chen, C., Pakdel, H., & Roy, C. (2001) · Bioresource Technology · doi:10.1016/s0960-8524(00)00180-2 · Cited by 655
A Review of Recent Advances in Biomass Pyrolysis
Wang, G., Dai, Y., Yang, H., Xiong, Q., Wang, K., Zhou, J., Li, Y., & Wang, S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03107 · Cited by 597
Self-citationStudy on the pyrolytic behaviour of xylan-based hemicellulose using TG–FTIR and Py–GC–FTIR
Shen, D. K., Gu, S., & Bridgwater, A. V. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.12.001 · Cited by 585
Lignocellulosic biomass-based pyrolysis: A comprehensive review
K N, Y., T, P. D., P, S., S, K., R, Y. K., Varjani, S., AdishKumar, S., Kumar, G., & J, R. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131824 · Cited by 529
Product Distribution from the Fast Pyrolysis of Hemicellulose
Patwardhan, P. R., Brown, R. C., & Shanks, B. H. (2011) · ChemSusChem · doi:10.1002/cssc.201000425 · Cited by 463
Volatile production from pyrolysis of cellulose, hemicellulose and lignin
Zhao, C., Jiang, E., & Chen, A. (2017) · Journal of the Energy Institute · doi:10.1016/j.joei.2016.08.004 · Cited by 458
A Critical Review on Hemicellulose Pyrolysis
Zhou, X., Li, W., Mabon, R., & Broadbelt, L. J. (2017) · Energy Technology · doi:10.1002/ente.201600327 · Cited by 419
Cellulose Pyrolysis Kinetics: Revisited
Antal, M. J., Várhegyi, G., & Jakab, E. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970144v · Cited by 323
Lédé, J. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.019 · Cited by 230
Kan, T., Strezov, V., Evans, T., He, J., Kumar, R., & Lu, Q. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110305 · Cited by 229
Ma, Z., Yang, Y., Wu, Y., Xu, J., Peng, H., Liu, X., Zhang, W., & Wang, S. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.03.015 · Cited by 217
Fundamental Advances in Biomass Autothermal/Oxidative Pyrolysis: A Review
Huang, Y., Li, B., Liu, D., Xie, X., Zhang, H., Sun, H., Hu, X., & Zhang, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c04196 · Cited by 211
Self-citationMa, Z., Wang, J., Yang, Y., Zhang, Y., Zhao, C., Yu, Y., & Wang, S. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.04.002 · Cited by 206
Self-citationBiofuels and renewable chemicals production by catalytic pyrolysis of cellulose: a review
Hassan, N. S., Jalil, A. A., Hitam, C. N. C., Vo, D. V. N., & Nabgan, W. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01040-7 · Cited by 176
Inherent Metal Elements in Biomass Pyrolysis: A Review
Giudicianni, P., Gargiulo, V., Grottola, C. M., Alfè, M., Ferreiro, A. I., Mendes, M. A. A., Fagnano, M., & Ragucci, R. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c04046 · Cited by 173
Chen, D., Chen, F., Cen, K., Cao, X., Zhang, J., & Zhou, J. (2020) · Fuel · doi:10.1016/j.fuel.2020.117936 · Cited by 150
Self-citationA new insight of lignin pyrolysis mechanism based on functional group evolutions of solid char
Yang, H., Dong, Z., Liu, B., Chen, Y., Gong, M., Li, S., & Chen, H. (2021) · Fuel · doi:10.1016/j.fuel.2020.119719 · Cited by 129
Benítez‐Guerrero, M., López‐Beceiro, J., Sánchez-Jiménez, P. E., & Pascual‐Cosp, J. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.02.013 · Cited by 129
Comprehensive mechanism of initial stage for lignin pyrolysis
Li, J., Bai, X., Fang, Y., Chen, Y., Wang, X., Chen, H., & Yang, H. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.01.016 · Cited by 127
Luo, Z., Lin, N., Sun, M., et al. (2020) · Carbon · doi:10.1016/j.carbon.2020.11.083 · Cited by 127
Quantitative Insights into the Fast Pyrolysis of Extracted Cellulose, Hemicelluloses, and Lignin
Carrier, M., Windt, M., Ziegler, B., Appelt, J., Saake, B., Meier, D., & Bridgwater, A. V. (2017) · ChemSusChem · doi:10.1002/cssc.201700984 · Cited by 123
Scheer, A. M., Mukarakate, C., Robichaud, D. J., et al. (2010) · The Journal of Physical Chemistry A · doi:10.1021/jp102046p · Cited by 121
Step-wise and one-step vacuum pyrolysis of birch-derived biomass to monitor the evolution of phenols
Murwanashyaka, J. N., Pakdel, H., & Roy, C. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00206-0 · Cited by 117
Kinetic modeling of biomass components pyrolysis using a sequential and coupling method
Wang, S., Lin, H., Ru, B., Dai, G., Wang, X., Xiao, G., & Luo, Z. (2016) · Fuel · doi:10.1016/j.fuel.2016.08.037 · Cited by 117
A modified kinetic analysis method of cellulose pyrolysis based on TG–FTIR technique
Yang, X., Zhao, Y., Li, R., Wu, Y., & Yang, M. (2018) · Thermochimica Acta · doi:10.1016/j.tca.2018.05.008 · Cited by 115
Mechanism of cellulose fast pyrolysis: The role of characteristic chain ends and dehydrated units
Lü, Q., Hu, B., Zhang, Z.-X., Wu, Y., Cui, M., Liu, D.-J., Dong, C., & Yang, Y. (2018) · Combustion and Flame · doi:10.1016/j.combustflame.2018.09.025 · Cited by 106
Influence of temperature and time on initial pyrolysis of cellulose and xylan
Usino, D. O., Supriyanto, S., Ylitervo, P., Pettersson, A., & Richards, T. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104782 · Cited by 100
Dai, G., Wang, K., Wang, G., & Wang, S. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.07.009 · Cited by 99
Xin, S., Yang, H., Chen, Y., Wang, X., & Chen, H. (2013) · Fuel · doi:10.1016/j.fuel.2013.05.061 · Cited by 98
Smith, M. W., Pecha, M. B., Helms, G., Scudiero, L., & Garcìa-Pèrez, M. (2017) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2017.05.015 · Cited by 95
Chen, D., Cen, K., Cao, X., Chen, F., Zhang, J., & Zhou, J. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110444 · Cited by 89
Self-citationChen, D., Cen, K., Chen, F., Ma, Z., Zhou, J., & Li, M. (2019) · Fuel · doi:10.1016/j.fuel.2019.116347 · Cited by 83
Self-citationLü, Q., Xie, W.-L., Hu, B., Liu, J., Zhao, W., Zhang, B., & Wang, T. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.11.011 · Cited by 83
Chen, D., Cen, K., Cao, X., Zhang, J., Chen, F., & Zhou, J. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123130 · Cited by 81
Self-citationPyrolysis of cellulose and lignin
Haensel, T., Comouth, A., Lorenz, P., Ahmed, S. I. ‐., Krischok, S., Zydziak, N., Kauffmann, A., & Schaefer, J. A. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.05.047 · Cited by 66
Liu, M., Zhu, X., Chen, R., Liao, Q., Xia, A., & Huang, Y. Y. (2020) · Fuel · doi:10.1016/j.fuel.2020.118843 · Cited by 59
Pyrolysis behavior of xylan-based hemicellulose in a fixed bed reactor
Gao, Z., Li, N., Wang, Y., Niu, W., & Yi, W. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104772 · Cited by 41
Giudicianni, P., Gargiulo, V., Alfè, M., Ragucci, R., Ferreiro, A. I., Rabaçal, M., & Costa, M. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.12.004 · Cited by 38
Smith, M. W., Helms, G., McEwen, J., & Garcìa-Pèrez, M. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.078 · Cited by 29
Gargiulo, V., Ferreiro, A. I., Giudicianni, P., Tomaselli, S., Costa, M., Ragucci, R., & Alfè, M. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105369 · Cited by 28
About the Influence of Doping Approach on the Alkali Metal Catalyzed Slow Pyrolysis of Xylan
Gargiulo, V., Giudicianni, P., Alfè, M., & Ragucci, R. (2019) · Journal of Chemistry · doi:10.1155/2019/9392571 · Cited by 10
Cited by
Apaydın Varol, E., & Mutlu, Ü. (2023) · Energies · doi:10.3390/en16093674 · Cited by 361
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
Critical review of the role of ash content and composition in biomass pyrolysis
Puri, L., Hu, Y., & Naterer, G. (2024) · Frontiers in Fuels · doi:10.3389/ffuel.2024.1378361 · Cited by 226
Estimation of the heat required for intermediate pyrolysis of biomass
Jerzak, W., Reinmöller, M., & Magdziarz, A. (2022) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-022-02391-1 · Cited by 61
Ganesan, A., Rezazgui, O., Langlois, S., Boussabbeh, C., & Barnabé, S. (2025) · Science of The Total Environment · doi:10.1016/j.scitotenv.2025.178650 · Cited by 38
Metadata
- Authors
- Chen, D., Cen, K., Zhuang, X., Gan, Z., Zhou, J., Zhang, Y., & Zhang, H.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2022-08
- Volume
- 242
- Pages
- 112142
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W4224926108
- Cited by
- 902
- References
- 47
- FWCI
- 43.38
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.